| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 10 Aug 2011 20:20:36 -0700
From: Todd Poynor <toddpoynor@...gle.com>
To: John Stultz <john.stultz@...aro.org>,
Alessandro Zummo <a.zummo@...ertech.it>
Cc: rtc-linux@...glegroups.com, linux-omap@...r.kernel.org,
linux-kernel@...r.kernel.org, Todd Poynor <toddpoynor@...gle.com>
Subject: [PATCH] rtc: twl: Fix registration vs. init order
Only register as an RTC device after the hardware has been
successfully initialized. The RTC class driver will call
back to this driver to read a pending alarm, and other
drivers watching for new devices on the RTC class may
read the RTC time upon registration. Such access might
occur while the RTC is stopped, prior to clearing
pending alarms, etc.
The new ordering also avoids leaving the platform
device drvdata set to an unregistered struct rtc_device *
on probe errors.
Signed-off-by: Todd Poynor <toddpoynor@...gle.com>
---
This version generated after applying:
[PATCH] rtc-twl: Switch to using threaded irq
http://patchwork.ozlabs.org/patch/97978/
drivers/rtc/rtc-twl.c | 52 ++++++++++++++++++++++--------------------------
1 files changed, 24 insertions(+), 28 deletions(-)
diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
index 9677bbc..20687d5 100644
--- a/drivers/rtc/rtc-twl.c
+++ b/drivers/rtc/rtc-twl.c
@@ -420,24 +420,12 @@ static struct rtc_class_ops twl_rtc_ops = {
static int __devinit twl_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
- int ret = 0;
+ int ret = -EINVAL;
int irq = platform_get_irq(pdev, 0);
u8 rd_reg;
if (irq <= 0)
- return -EINVAL;
-
- rtc = rtc_device_register(pdev->name,
- &pdev->dev, &twl_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
- ret = PTR_ERR(rtc);
- dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
- PTR_ERR(rtc));
- goto out0;
-
- }
-
- platform_set_drvdata(pdev, rtc);
+ goto out1;
ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
if (ret < 0)
@@ -454,14 +442,6 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev)
if (ret < 0)
goto out1;
- ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt,
- IRQF_TRIGGER_RISING,
- dev_name(&rtc->dev), rtc);
- if (ret < 0) {
- dev_err(&pdev->dev, "IRQ is not free.\n");
- goto out1;
- }
-
if (twl_class_is_6030()) {
twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
REG_INT_MSK_LINE_A);
@@ -472,28 +452,44 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev)
/* Check RTC module status, Enable if it is off */
ret = twl_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
if (ret < 0)
- goto out2;
+ goto out1;
if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) {
dev_info(&pdev->dev, "Enabling TWL-RTC.\n");
rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M;
ret = twl_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG);
if (ret < 0)
- goto out2;
+ goto out1;
}
/* init cached IRQ enable bits */
ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
if (ret < 0)
+ goto out1;
+
+ rtc = rtc_device_register(pdev->name,
+ &pdev->dev, &twl_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ ret = PTR_ERR(rtc);
+ dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+ PTR_ERR(rtc));
+ goto out1;
+ }
+
+ ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt,
+ IRQF_TRIGGER_RISING,
+ dev_name(&rtc->dev), rtc);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "IRQ is not free.\n");
goto out2;
+ }
- return ret;
+ platform_set_drvdata(pdev, rtc);
+ return 0;
out2:
- free_irq(irq, rtc);
-out1:
rtc_device_unregister(rtc);
-out0:
+out1:
return ret;
}
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists