linux-kernel - Re: [PATCH v4] usb: gadget: storage_common: make FSG_NUM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 18 Aug 2011 14:14:00 +0300
From:	Felipe Balbi <balbi@...com>
To:	Per Forlin <per.forlin@...ricsson.com>
Cc:	Felipe Balbi <balbi@...com>, Greg Kroah-Hartman <gregkh@...e.de>,
	Michal Nazarewicz <mina86@...a86.com>,
	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	linaro-dev@...ts.linaro.org, Per Forlin <per.forlin@...aro.org>
Subject: Re: [PATCH v4] usb: gadget: storage_common: make FSG_NUM_BUFFERS
 variable size

Hi,

On Thu, Aug 18, 2011 at 11:28:46AM +0200, Per Forlin wrote:
> From: Per Forlin <per.forlin@...aro.org>
> 
> FSG_NUM_BUFFERS is set to 2 as default.
> Usually 2 buffers are enough to establish a good buffering pipeline.
> The number may be increased in order to compensate a for bursty VFS
> behaviour.
> 
> Here follows a description of system that may require more than
> 2 buffers.
>  * CPU ondemand governor active
>  * latency cost for wake up and/or frequency change
>  * DMA for IO
> 
> Use case description.
>  * Data transfer from MMC via VFS to USB.
>  * DMA shuffles data from MMC and to USB.
>  * The CPU wakes up every now and then to pass data in and out from VFS,
>    which cause the bursty VFS behaviour.
> 
> Test set up
>  * Running dd on the host reading from the mass storage device
>  * cmdline: dd if=/dev/sdb of=/dev/null bs=4k count=$((256*100))
>  * Caches are dropped on the host and on the device before each run
> 
> Measurements on a Snowball board with ondemand_govenor active.
> 
> FSG_NUM_BUFFERS 2
> 104857600 bytes (105 MB) copied, 5.62173 s, 18.7 MB/s
> 104857600 bytes (105 MB) copied, 5.61811 s, 18.7 MB/s
> 104857600 bytes (105 MB) copied, 5.57817 s, 18.8 MB/s
> 
> FSG_NUM_BUFFERS 4
> 104857600 bytes (105 MB) copied, 5.26839 s, 19.9 MB/s
> 104857600 bytes (105 MB) copied, 5.2691 s, 19.9 MB/s
> 104857600 bytes (105 MB) copied, 5.2711 s, 19.9 MB/s
> 
> There may not be one optimal number for all boards. This is why
> the number is added to Kconfig. If selecting USB_DEBUG this value may be
> set by a module parameter as well.
> 
> Signed-off-by: Per Forlin <per.forlin@...aro.org>

Alan, are you ok with the change ? I'm not sure tying the parameter to
CONFIG_USB_DEBUG is a good idea, maybe CONFIG_USB_GADGET_DEBUG or
CONFIG_USB_FILE_STORAGE_TEST is better ?

-- 
balbi

Download attachment "signature.asc" of type "application/pgp-signature" (491 bytes)