linux-kernel - Re: [PATCH 6/6] Input: elantech

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 18 Aug 2011 09:25:00 -0500
From:	Seth Forshee <seth.forshee@...onical.com>
To:	JJ Ding <jj_ding@....com.tw>, linux-input@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Aaron Huang <aaron_huang@....com.tw>,
	Tom Lin <tom_lin@....com.tw>,
	Eric Piel <E.A.B.Piel@...elft.nl>,
	Daniel Kurtz <djkurtz@...omium.org>,
	Chase Douglas <chase.douglas@...onical.com>,
	Henrik Rydberg <rydberg@...omail.se>,
	Alessandro Rubini <rubini@...l.unipv.it>
Subject: Re: [PATCH 6/6] Input: elantech - add v3 hardware support

On Thu, Aug 18, 2011 at 08:58:53AM -0500, Seth Forshee wrote:
> The case 3 code is nearly identical to case 2. How about this?
> 
> 	case 2:
> 		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
> 		/* fall through */
> 
> 	case 3:
> 		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
> 		input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
> 		/* range of pressure and width is the same as v2 */
> 		input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
> 				     ETP_PMAX_V2, 0, 0);
> 		input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
> 				     ETP_WMAX_V2, 0, 0);
> 		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
> 		input_mt_init_slots(dev, 2);
> 		input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
> 		input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
> 		break;

Sorry, that should have been:

	case 2:
		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
		/* fall through */

	case 3:
		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
		input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
		if (etd->reports_pressure) {
			input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
					     ETP_PMAX_V2, 0, 0);
			input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
					     ETP_WMAX_V2, 0, 0);
		}
		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
		input_mt_init_slots(dev, 2);
		input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
		input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
		break;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/