linux-kernel - RE: [PATCH 0000/0046] Staging: hv: Driver cleanup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 30 Aug 2011 17:22:54 +0000
From:	KY Srinivasan <kys@...rosoft.com>
To:	Olaf Hering <olaf@...fle.de>
CC:	"gregkh@...e.de" <gregkh@...e.de>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"devel@...uxdriverproject.org" <devel@...uxdriverproject.org>,
	"virtualization@...ts.osdl.org" <virtualization@...ts.osdl.org>
Subject: RE: [PATCH 0000/0046] Staging: hv: Driver cleanup



> -----Original Message-----
> From: Olaf Hering [mailto:olaf@...fle.de]
> Sent: Tuesday, August 30, 2011 8:49 AM
> To: KY Srinivasan
> Cc: gregkh@...e.de; linux-kernel@...r.kernel.org;
> devel@...uxdriverproject.org; virtualization@...ts.osdl.org
> Subject: Re: [PATCH 0000/0046] Staging: hv: Driver cleanup
> 
> On Sat, Aug 27, K. Y. Srinivasan wrote:
> 
> > 	2) Handle all block devices using the storvsc driver. I have modified
> > 	   the implementation here based on Christoph's feedback on my earlier
> > 	   implementation.
> 
> The upgrade path from hv_blkvsc to hv_storvsc is difficult.
> 
> hv_storvsc does not provide the vmbus:hv_block modalias, so mkinitrd
> does not know what module to choose when mkinitrd is called in a
> previous kernel (like sles11sp1).
> 
> 
> In a guest with both SCSI and IDE controllers the IDE disks are
> discovered first, so the SCSI drives will also change their names.
> Thats not a problem for data partitions because they could be mounted by
> UUID or LABEL in fstab.
> But its difficult to adjust /boot/grub/device.map for example because
> the old  IDE drives do not provide an identifier. What is the best way
> to make sure the rename from hd* to sd* in such config files is done
> correctly? Is it safe to assume that all drives with a class_id of
> 32412632-86cb-44a2-9b5c50d1417354f5 are connected to IDE ports?

The class_id is invariant as we are returning the guid of the device under class_id.

So, if you see a IDE guid under class_id, you can be sure (a) it is an ide device and (b)
it is a device managed via the PV drivers.

> 
> localhost:~ # head /sys/bus/vmbus/devices/vmbus_0_{1,2,3,10,11}/class_id
> ==> /sys/bus/vmbus/devices/vmbus_0_1/class_id <==
> {32412632-86cb-44a2-9b5c50d1417354f5}
> 
> ==> /sys/bus/vmbus/devices/vmbus_0_2/class_id <==
> {32412632-86cb-44a2-9b5c50d1417354f5}
> 
> ==> /sys/bus/vmbus/devices/vmbus_0_3/class_id <==
> {32412632-86cb-44a2-9b5c50d1417354f5}
> 
> ==> /sys/bus/vmbus/devices/vmbus_0_10/class_id <==
> {ba6163d9-04a1-4d29-b60572e2ffb1dc7f}
> 
> ==> /sys/bus/vmbus/devices/vmbus_0_11/class_id <==
> {ba6163d9-04a1-4d29-b60572e2ffb1dc7f}
> 
> 
> In my test system, the IDE drives are now discovered twice, once by
> hv_storvsc and once by libata:

This is a known (old problem). The way this was handled earlier was to have the 
modprobe rules in place to setup a dependency that would force the load of the
hyper-v driver (blk / stor) ahead of the native driver and if the load of the PV
driver succeeded, we would not load the native driver. In sles11 sp1, we had a rule for 
loading blkvsc. With the merge of blkvsc and storvsc, the only change we need to make
is to have storvsc in the rule (instaed of blkvsc).

Regards,

K. Y