| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 24 Sep 2011 14:21:55 +0800
From: keguang.zhang@...il.com
To: linux-mips@...ux-mips.org, linux-kernel@...r.kernel.org
Cc: ralf@...ux-mips.org, wuzhangjin@...il.com, r0bertz@...too.org,
chenj@...ote.com, Kelvin Cheung <keguang.zhang@...il.com>
Subject: [PATCH 1/2] MIPS: Add basic support for Loongson1B (UPDATED)
From: Kelvin Cheung <keguang.zhang@...il.com>
This patch adds basic support for Loongson1B
including serial port, timer and interrupt handler.
Loongson 1B is a 32-bit SoC designed by Institute of
Computing Technology (ICT), Chinese Academy of Sciences (CAS),
which implements the MIPS32 release 2 instruction set.
Signed-off-by: Kelvin Cheung <keguang.zhang@...il.com>
---
arch/mips/Kbuild.platforms | 1 +
arch/mips/Kconfig | 31 ++++
arch/mips/include/asm/cpu.h | 3 +-
arch/mips/include/asm/mach-loongson1/irq.h | 70 +++++++++
arch/mips/include/asm/mach-loongson1/loongson1.h | 48 +++++++
arch/mips/include/asm/mach-loongson1/platform.h | 20 +++
arch/mips/include/asm/mach-loongson1/prom.h | 24 +++
arch/mips/include/asm/mach-loongson1/regs-clk.h | 32 ++++
arch/mips/include/asm/mach-loongson1/regs-intc.h | 25 ++++
arch/mips/include/asm/mach-loongson1/regs-wdt.h | 21 +++
arch/mips/include/asm/mach-loongson1/war.h | 25 ++++
arch/mips/include/asm/module.h | 2 +
arch/mips/kernel/cpu-probe.c | 15 ++
arch/mips/kernel/perf_event_mipsxx.c | 6 +
arch/mips/kernel/traps.c | 1 +
arch/mips/loongson1/Kconfig | 21 +++
arch/mips/loongson1/Makefile | 11 ++
arch/mips/loongson1/Platform | 7 +
arch/mips/loongson1/common/Makefile | 5 +
arch/mips/loongson1/common/clock.c | 165 ++++++++++++++++++++++
arch/mips/loongson1/common/irq.c | 136 ++++++++++++++++++
arch/mips/loongson1/common/platform.c | 50 +++++++
arch/mips/loongson1/common/prom.c | 88 ++++++++++++
arch/mips/loongson1/common/reset.c | 46 ++++++
arch/mips/loongson1/common/setup.c | 29 ++++
arch/mips/loongson1/ls1b/Makefile | 5 +
arch/mips/loongson1/ls1b/board.c | 30 ++++
arch/mips/oprofile/common.c | 1 +
arch/mips/oprofile/op_model_mipsxx.c | 4 +
29 files changed, 921 insertions(+), 1 deletions(-)
create mode 100644 arch/mips/include/asm/mach-loongson1/irq.h
create mode 100644 arch/mips/include/asm/mach-loongson1/loongson1.h
create mode 100644 arch/mips/include/asm/mach-loongson1/platform.h
create mode 100644 arch/mips/include/asm/mach-loongson1/prom.h
create mode 100644 arch/mips/include/asm/mach-loongson1/regs-clk.h
create mode 100644 arch/mips/include/asm/mach-loongson1/regs-intc.h
create mode 100644 arch/mips/include/asm/mach-loongson1/regs-wdt.h
create mode 100644 arch/mips/include/asm/mach-loongson1/war.h
create mode 100644 arch/mips/loongson1/Kconfig
create mode 100644 arch/mips/loongson1/Makefile
create mode 100644 arch/mips/loongson1/Platform
create mode 100644 arch/mips/loongson1/common/Makefile
create mode 100644 arch/mips/loongson1/common/clock.c
create mode 100644 arch/mips/loongson1/common/irq.c
create mode 100644 arch/mips/loongson1/common/platform.c
create mode 100644 arch/mips/loongson1/common/prom.c
create mode 100644 arch/mips/loongson1/common/reset.c
create mode 100644 arch/mips/loongson1/common/setup.c
create mode 100644 arch/mips/loongson1/ls1b/Makefile
create mode 100644 arch/mips/loongson1/ls1b/board.c
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 5ce8029..d64786d 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -14,6 +14,7 @@ platforms += jz4740
platforms += lantiq
platforms += lasat
platforms += loongson
+platforms += loongson1
platforms += mipssim
platforms += mti-malta
platforms += netlogic
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d9b8ea8..4c6ad4f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -262,6 +262,17 @@ config MACH_LOONGSON
Chinese Academy of Sciences (CAS) in the People's Republic
of China. The chief architect is Professor Weiwu Hu.
+config MACH_LOONGSON1
+ bool "Loongson1 family of machines"
+ select SYS_SUPPORTS_ZBOOT
+ help
+ This enables the support of Loongson1 family of machines.
+
+ Loongson1 is a family of 32-bit MIPS-compatible SoCs.
+ developed at Institute of Computing Technology (ICT),
+ Chinese Academy of Sciences (CAS) in the People's Republic
+ of China.
+
config MIPS_MALTA
bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
@@ -808,6 +819,7 @@ source "arch/mips/txx9/Kconfig"
source "arch/mips/vr41xx/Kconfig"
source "arch/mips/cavium-octeon/Kconfig"
source "arch/mips/loongson/Kconfig"
+source "arch/mips/loongson1/Kconfig"
source "arch/mips/netlogic/Kconfig"
endmenu
@@ -1201,6 +1213,14 @@ config CPU_LOONGSON2F
have a similar programming interface with FPGA northbridge used in
Loongson2E.
+config CPU_LOONGSON1B
+ bool "Loongson 1B"
+ depends on SYS_HAS_CPU_LOONGSON1B
+ select CPU_LOONGSON1
+ help
+ The Loongson 1B is a 32-bit SoC, which implements the MIPS32
+ release 2 instruction set.
+
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1
@@ -1529,6 +1549,14 @@ config CPU_LOONGSON2
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
+config CPU_LOONGSON1
+ bool
+ select CPU_MIPS32
+ select CPU_MIPSR2
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+
config SYS_HAS_CPU_LOONGSON2E
bool
@@ -1538,6 +1566,9 @@ config SYS_HAS_CPU_LOONGSON2F
select CPU_SUPPORTS_ADDRWINCFG if 64BIT
select CPU_SUPPORTS_UNCACHED_ACCELERATED
+config SYS_HAS_CPU_LOONGSON1B
+ bool
+
config SYS_HAS_CPU_MIPS32_R1
bool
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 5f95a4b..975f372 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -191,6 +191,7 @@
#define PRID_REV_34K_V1_0_2 0x0022
#define PRID_REV_LOONGSON2E 0x0002
#define PRID_REV_LOONGSON2F 0x0003
+#define PRID_REV_LOONGSON1B 0x0020
/*
* Older processors used to encode processor version and revision in two
@@ -253,7 +254,7 @@ enum cpu_type_enum {
*/
CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
- CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC,
+ CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_LOONGSON1,
/*
* MIPS64 class processors
diff --git a/arch/mips/include/asm/mach-loongson1/irq.h b/arch/mips/include/asm/mach-loongson1/irq.h
new file mode 100644
index 0000000..e8fed7a
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/irq.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * IRQ mappings for Loongson1.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_IRQ_H
+#define __ASM_MACH_LOONGSON1_IRQ_H
+
+/*
+ * CPU core Interrupt Numbers
+ */
+#define MIPS_CPU_IRQ_BASE 0
+#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
+#define SOFTINT0_IRQ MIPS_CPU_IRQ(0)
+#define SOFTINT1_IRQ MIPS_CPU_IRQ(1)
+#define INT0_IRQ MIPS_CPU_IRQ(2)
+#define INT1_IRQ MIPS_CPU_IRQ(3)
+#define INT2_IRQ MIPS_CPU_IRQ(4)
+#define INT3_IRQ MIPS_CPU_IRQ(5)
+#define INT4_IRQ MIPS_CPU_IRQ(6)
+#define TIMER_IRQ MIPS_CPU_IRQ(7) /* cpu timer */
+
+/*
+ * INT0~3 Interrupt Numbers
+ */
+#define LOONGSON1_IRQ_BASE 8
+#define LOONGSON1_IRQ(n, x) (LOONGSON1_IRQ_BASE + (n << 5) + (x))
+
+#define LOONGSON1_UART0_IRQ LOONGSON1_IRQ(0, 2)
+#define LOONGSON1_UART1_IRQ LOONGSON1_IRQ(0, 3)
+#define LOONGSON1_UART2_IRQ LOONGSON1_IRQ(0, 4)
+#define LOONGSON1_UART3_IRQ LOONGSON1_IRQ(0, 5)
+#define LOONGSON1_CAN0_IRQ LOONGSON1_IRQ(0, 6)
+#define LOONGSON1_CAN1_IRQ LOONGSON1_IRQ(0, 7)
+#define LOONGSON1_SPI0_IRQ LOONGSON1_IRQ(0, 8)
+#define LOONGSON1_SPI1_IRQ LOONGSON1_IRQ(0, 9)
+#define LOONGSON1_AC97_IRQ LOONGSON1_IRQ(0, 10)
+#define LOONGSON1_DMA0_IRQ LOONGSON1_IRQ(0, 13)
+#define LOONGSON1_DMA1_IRQ LOONGSON1_IRQ(0, 14)
+#define LOONGSON1_DMA2_IRQ LOONGSON1_IRQ(0, 15)
+#define LOONGSON1_PWM0_IRQ LOONGSON1_IRQ(0, 17)
+#define LOONGSON1_PWM1_IRQ LOONGSON1_IRQ(0, 18)
+#define LOONGSON1_PWM2_IRQ LOONGSON1_IRQ(0, 19)
+#define LOONGSON1_PWM3_IRQ LOONGSON1_IRQ(0, 20)
+#define LOONGSON1_RTC_INT0_IRQ LOONGSON1_IRQ(0, 21)
+#define LOONGSON1_RTC_INT1_IRQ LOONGSON1_IRQ(0, 22)
+#define LOONGSON1_RTC_INT2_IRQ LOONGSON1_IRQ(0, 23)
+#define LOONGSON1_TOY_INT0_IRQ LOONGSON1_IRQ(0, 24)
+#define LOONGSON1_TOY_INT1_IRQ LOONGSON1_IRQ(0, 25)
+#define LOONGSON1_TOY_INT2_IRQ LOONGSON1_IRQ(0, 26)
+#define LOONGSON1_RTC_TICK_IRQ LOONGSON1_IRQ(0, 27)
+#define LOONGSON1_TOY_TICK_IRQ LOONGSON1_IRQ(0, 28)
+#define LOONGSON1_UART4_IRQ LOONGSON1_IRQ(0, 29)
+#define LOONGSON1_UART5_IRQ LOONGSON1_IRQ(0, 30)
+
+#define LOONGSON1_OHCI_IRQ LOONGSON1_IRQ(1, 0)
+#define LOONGSON1_EHCI_IRQ LOONGSON1_IRQ(1, 1)
+#define LOONGSON1_GMAC0_IRQ LOONGSON1_IRQ(1, 2)
+#define LOONGSON1_GMAC1_IRQ LOONGSON1_IRQ(1, 3)
+
+#define NR_IRQS LOONGSON1_GMAC1_IRQ
+
+#endif /* __ASM_MACH_LOONGSON1_IRQ_H */
diff --git a/arch/mips/include/asm/mach-loongson1/loongson1.h b/arch/mips/include/asm/mach-loongson1/loongson1.h
new file mode 100644
index 0000000..466136d
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/loongson1.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Register mappings for Loongson1.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_LOONGSON1_H
+#define __ASM_MACH_LOONGSON1_LOONGSON1_H
+
+#define DEFAULT_MEMSIZE (256) /* If no memsize provided */
+
+/* Loongson1 Register Bases */
+/* All regs are accessed in KSEG1 */
+#define LOONGSON1_REGBASE (0xa0000000ul + 0x1fe00000ul)
+
+#define LOONGSON1_INTC_BASE (0xbfd01040)
+#define LOONGSON1_USB_BASE (0xbfe00000)
+#define LOONGSON1_GMAC0_BASE (0xbfe10000)
+#define LOONGSON1_GMAC1_BASE (0xbfe20000)
+#define LOONGSON1_UART0_BASE (0xbfe40000)
+#define LOONGSON1_UART1_BASE (0xbfe44000)
+#define LOONGSON1_UART2_BASE (0xbfe48000)
+#define LOONGSON1_UART3_BASE (0xbfe4c000)
+#define LOONGSON1_UART4_BASE (0xbfe6c000)
+#define LOONGSON1_UART5_BASE (0xbfe7c000)
+#define LOONGSON1_CAN0_BASE (0xbfe50000)
+#define LOONGSON1_CAN1_BASE (0xbfe54000)
+#define LOONGSON1_I2C0_BASE (0xbfe58000)
+#define LOONGSON1_I2C1_BASE (0xbfe68000)
+#define LOONGSON1_I2C2_BASE (0xbfe70000)
+#define LOONGSON1_PWM_BASE (0xbfe5c000)
+#define LOONGSON1_WDT_BASE (0xbfe5c060)
+#define LOONGSON1_RTC_BASE (0xbfe64000)
+#define LOONGSON1_AC97_BASE (0xbfe74000)
+#define LOONGSON1_NAND_BASE (0xbfe78000)
+#define LOONGSON1_CLK_BASE (0xbfe78030)
+
+#include <regs-clk.h>
+#include <regs-intc.h>
+#include <regs-wdt.h>
+
+#endif /* __ASM_MACH_LOONGSON1_LOONGSON1_H */
diff --git a/arch/mips/include/asm/mach-loongson1/platform.h b/arch/mips/include/asm/mach-loongson1/platform.h
new file mode 100644
index 0000000..db4f02e
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/platform.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_PLATFORM_H
+#define __ASM_MACH_LOONGSON1_PLATFORM_H
+
+#include <linux/platform_device.h>
+
+extern struct platform_device loongson1_uart_device;
+
+void loongson1_serial_setup(void);
+
+#endif /* __ASM_MACH_LOONGSON1_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-loongson1/prom.h b/arch/mips/include/asm/mach-loongson1/prom.h
new file mode 100644
index 0000000..b871dc4
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/prom.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_PROM_H
+#define __ASM_MACH_LOONGSON1_PROM_H
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+/* environment arguments from bootloader */
+extern unsigned long memsize, highmemsize;
+
+/* loongson-specific command line, env and memory initialization */
+extern char *prom_getenv(char *name);
+extern void __init prom_init_cmdline(void);
+
+#endif /* __ASM_MACH_LOONGSON1_PROM_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-clk.h b/arch/mips/include/asm/mach-loongson1/regs-clk.h
new file mode 100644
index 0000000..7a09d6a
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-clk.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Loongson1 Clock Register Definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_CLK_H
+#define __ASM_MACH_LOONGSON1_REGS_CLK_H
+
+#define LS1_CLK_REG(x) ((void __iomem *)(LOONGSON1_CLK_BASE + (x)))
+
+#define LS1_CLK_PLL_FREQ LS1_CLK_REG(0x0)
+#define LS1_CLK_PLL_DIV LS1_CLK_REG(0x4)
+
+/* Clock PLL Divisor Register Bits */
+#define DIV_DC_EN (0x1 << 31)
+#define DIV_DC (0x1f << 26)
+#define DIV_CPU_EN (0x1 << 25)
+#define DIV_CPU (0x1f << 20)
+#define DIV_DDR_EN (0x1 << 19)
+#define DIV_DDR (0x1f << 14)
+
+#define DIV_DC_SHIFT (26)
+#define DIV_CPU_SHIFT (20)
+#define DIV_DDR_SHIFT (14)
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_CLK_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-intc.h b/arch/mips/include/asm/mach-loongson1/regs-intc.h
new file mode 100644
index 0000000..3c62411
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-intc.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Loongson1 Interrupt register definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_INTC_H
+#define __ASM_MACH_LOONGSON1_REGS_INTC_H
+
+#define LS1_INTC_REG(x) ((void __iomem *)(LOONGSON1_INTC_BASE \
+ + n * 0x18 + x))
+
+#define LS1_INTC_INTISR(n) LS1_INTC_REG(0x0)
+#define LS1_INTC_INTIEN(n) LS1_INTC_REG(0x4)
+#define LS1_INTC_INTSET(n) LS1_INTC_REG(0x8)
+#define LS1_INTC_INTCLR(n) LS1_INTC_REG(0xc)
+#define LS1_INTC_INTPOL(n) LS1_INTC_REG(0x10)
+#define LS1_INTC_INTEDGE(n) LS1_INTC_REG(0x14)
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_INTC_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-wdt.h b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
new file mode 100644
index 0000000..2393dd7
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Loongson1 Watchdog register definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_WDT_H
+#define __ASM_MACH_LOONGSON1_REGS_WDT_H
+
+#define LS1_WDT_REG(x) ((void __iomem *)(LOONGSON1_WDT_BASE + (x)))
+
+#define LS1_WDT_EN LS1_WDT_REG(0x0)
+#define LS1_WDT_SET LS1_WDT_REG(0x4)
+#define LS1_WDT_TIMER LS1_WDT_REG(0x8)
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_WDT_H */
diff --git a/arch/mips/include/asm/mach-loongson1/war.h b/arch/mips/include/asm/mach-loongson1/war.h
new file mode 100644
index 0000000..e3680a8
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@...ux-mips.org>
+ */
+#ifndef __ASM_MACH_LOONGSON1_WAR_H
+#define __ASM_MACH_LOONGSON1_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MACH_LOONGSON1_WAR_H */
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index bc01a02..b53d642 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -116,6 +116,8 @@ search_module_dbetables(unsigned long addr)
#define MODULE_PROC_FAMILY "SB1 "
#elif defined CONFIG_CPU_LOONGSON2
#define MODULE_PROC_FAMILY "LOONGSON2 "
+#elif defined CONFIG_CPU_LOONGSON1
+#define MODULE_PROC_FAMILY "LOONGSON1 "
#elif defined CONFIG_CPU_CAVIUM_OCTEON
#define MODULE_PROC_FAMILY "OCTEON "
#elif defined CONFIG_CPU_XLR
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 664bc13..98d4235 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -37,6 +37,8 @@
void (*cpu_wait)(void);
EXPORT_SYMBOL(cpu_wait);
+static void __cpuinit decode_configs(struct cpuinfo_mips *c);
+
static void r3081_wait(void)
{
unsigned long cfg = read_c0_conf();
@@ -191,6 +193,7 @@ void __init check_wait(void)
case CPU_CAVIUM_OCTEON2:
case CPU_JZRISC:
case CPU_XLR:
+ case CPU_LOONGSON1:
cpu_wait = r4k_wait;
break;
@@ -636,6 +639,18 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
MIPS_CPU_32FPR;
c->tlbsize = 64;
break;
+ case PRID_IMP_LOONGSON1:
+ decode_configs(c);
+
+ c->cputype = CPU_LOONGSON1;
+
+ switch (c->processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON1B:
+ __cpu_name[cpu] = "Loongson 1B";
+ break;
+ }
+
+ break;
}
}
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index e5ad09a..e316b0e 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1062,6 +1062,12 @@ init_hw_perf_events(void)
mipsxxcore_pmu.irq = irq;
mipspmu = &mipsxxcore_pmu;
break;
+ case CPU_LOONGSON1:
+ mipsxxcore_pmu.name = "mips/loongson1";
+ mipsxxcore_pmu.num_counters = counters;
+ mipsxxcore_pmu.irq = irq;
+ mipspmu = &mipsxxcore_pmu;
+ break;
default:
pr_cont("Either hardware does not support performance "
"counters, or not yet implemented.\n");
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 01eff7e..cd55823 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1241,6 +1241,7 @@ static inline void parity_protection_init(void)
break;
case CPU_5KC:
+ case CPU_LOONGSON1:
write_c0_ecc(0x80000000);
back_to_back_c0_hazard();
/* Set the PE bit (bit 31) in the c0_errctl register. */
diff --git a/arch/mips/loongson1/Kconfig b/arch/mips/loongson1/Kconfig
new file mode 100644
index 0000000..237fa21
--- /dev/null
+++ b/arch/mips/loongson1/Kconfig
@@ -0,0 +1,21 @@
+if MACH_LOONGSON1
+
+choice
+ prompt "Machine Type"
+
+config LOONGSON1_LS1B
+ bool "Loongson LS1B board"
+ select CEVT_R4K
+ select CSRC_R4K
+ select SYS_HAS_CPU_LOONGSON1B
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select IRQ_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_HAS_EARLY_PRINTK
+
+endchoice
+
+endif # MACH_LOONGSON1
diff --git a/arch/mips/loongson1/Makefile b/arch/mips/loongson1/Makefile
new file mode 100644
index 0000000..e9123c2
--- /dev/null
+++ b/arch/mips/loongson1/Makefile
@@ -0,0 +1,11 @@
+#
+# Common code for all Loongson1 based systems
+#
+
+obj-$(CONFIG_MACH_LOONGSON1) += common/
+
+#
+# Loongson LS1B board
+#
+
+obj-$(CONFIG_LOONGSON1_LS1B) += ls1b/
diff --git a/arch/mips/loongson1/Platform b/arch/mips/loongson1/Platform
new file mode 100644
index 0000000..92804c6
--- /dev/null
+++ b/arch/mips/loongson1/Platform
@@ -0,0 +1,7 @@
+cflags-$(CONFIG_CPU_LOONGSON1) += \
+ $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
+ -Wa,-mips32r2 -Wa,--trap
+
+platform-$(CONFIG_MACH_LOONGSON1) += loongson1/
+cflags-$(CONFIG_MACH_LOONGSON1) += -I$(srctree)/arch/mips/include/asm/mach-loongson1
+load-$(CONFIG_LOONGSON1_LS1B) += 0xffffffff80010000
diff --git a/arch/mips/loongson1/common/Makefile b/arch/mips/loongson1/common/Makefile
new file mode 100644
index 0000000..b279770
--- /dev/null
+++ b/arch/mips/loongson1/common/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for common code of loongson1 based machines.
+#
+
+obj-y += clock.o irq.o platform.o prom.o reset.o setup.o
diff --git a/arch/mips/loongson1/common/clock.c b/arch/mips/loongson1/common/clock.c
new file mode 100644
index 0000000..7f4f28b
--- /dev/null
+++ b/arch/mips/loongson1/common/clock.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <asm/clock.h>
+#include <asm/time.h>
+
+#include <loongson1.h>
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+struct clk *clk_get(struct device *dev, const char *name)
+{
+ struct clk *c;
+ struct clk *ret = NULL;
+
+ mutex_lock(&clocks_mutex);
+ list_for_each_entry(c, &clocks, node) {
+ if (!strcmp(c->name, name)) {
+ ret = c;
+ break;
+ }
+ }
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_get);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static void pll_clk_init(struct clk *clk)
+{
+ u32 pll;
+
+ pll = __raw_readl(LS1_CLK_PLL_FREQ);
+ clk->rate = (12 + (pll & 0x3f)) * 33 / 2
+ + ((pll >> 8) & 0x3ff) * 33 / 1024 / 2;
+ clk->rate *= 1000000;
+}
+
+static void cpu_clk_init(struct clk *clk)
+{
+ u32 pll, ctrl;
+
+ pll = clk_get_rate(clk->parent);
+ ctrl = __raw_readl(LS1_CLK_PLL_DIV) & DIV_CPU;
+ clk->rate = pll / (ctrl >> DIV_CPU_SHIFT);
+}
+
+static void ddr_clk_init(struct clk *clk)
+{
+ u32 pll, ctrl;
+
+ pll = clk_get_rate(clk->parent);
+ ctrl = __raw_readl(LS1_CLK_PLL_DIV) & DIV_DDR;
+ clk->rate = pll / (ctrl >> DIV_DDR_SHIFT);
+}
+
+static void dc_clk_init(struct clk *clk)
+{
+ u32 pll, ctrl;
+
+ pll = clk_get_rate(clk->parent);
+ ctrl = __raw_readl(LS1_CLK_PLL_DIV) & DIV_DC;
+ clk->rate = pll / (ctrl >> DIV_DC_SHIFT);
+}
+
+static struct clk_ops pll_clk_ops = {
+ .init = pll_clk_init,
+};
+
+static struct clk_ops cpu_clk_ops = {
+ .init = cpu_clk_init,
+};
+
+static struct clk_ops ddr_clk_ops = {
+ .init = ddr_clk_init,
+};
+
+static struct clk_ops dc_clk_ops = {
+ .init = dc_clk_init,
+};
+
+static struct clk pll_clk = {
+ .name = "pll",
+ .ops = &pll_clk_ops,
+};
+
+static struct clk cpu_clk = {
+ .name = "cpu",
+ .parent = &pll_clk,
+ .ops = &cpu_clk_ops,
+};
+
+static struct clk ddr_clk = {
+ .name = "ddr",
+ .parent = &pll_clk,
+ .ops = &ddr_clk_ops,
+};
+
+static struct clk dc_clk = {
+ .name = "dc",
+ .parent = &pll_clk,
+ .ops = &dc_clk_ops,
+};
+
+int clk_register(struct clk *clk)
+{
+ mutex_lock(&clocks_mutex);
+ list_add(&clk->node, &clocks);
+ if (clk->ops->init)
+ clk->ops->init(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+static struct clk *loongson1_clks[] = {
+ &pll_clk,
+ &cpu_clk,
+ &ddr_clk,
+ &dc_clk,
+};
+
+int __init loongson1_clock_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(loongson1_clks); i++)
+ clk_register(loongson1_clks[i]);
+
+ return 0;
+}
+
+void __init plat_time_init(void)
+{
+ struct clk *clk;
+
+ /* Initialize loongson1 clocks */
+ loongson1_clock_init();
+
+ /* setup mips r4k timer */
+ clk = clk_get(NULL, "cpu");
+ if (IS_ERR(clk))
+ panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
+
+ mips_hpt_frequency = clk_get_rate(clk) / 2;
+}
diff --git a/arch/mips/loongson1/common/irq.c b/arch/mips/loongson1/common/irq.c
new file mode 100644
index 0000000..a5dcabb
--- /dev/null
+++ b/arch/mips/loongson1/common/irq.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq_cpu.h>
+
+#include <loongson1.h>
+#include <irq.h>
+
+static void loongson1_irq_ack(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1_INTC_INTCLR(n))
+ | (1 << bit), LS1_INTC_INTCLR(n));
+}
+
+static void loongson1_irq_mask(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1_INTC_INTIEN(n))
+ & ~(1 << bit), LS1_INTC_INTIEN(n));
+}
+
+static void loongson1_irq_mask_ack(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1_INTC_INTIEN(n))
+ & ~(1 << bit), LS1_INTC_INTIEN(n));
+ __raw_writel(__raw_readl(LS1_INTC_INTCLR(n))
+ | (1 << bit), LS1_INTC_INTCLR(n));
+}
+
+static void loongson1_irq_unmask(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1_INTC_INTIEN(n))
+ | (1 << bit), LS1_INTC_INTIEN(n));
+}
+
+static struct irq_chip loongson1_irq_chip = {
+ .name = "LOONGSON1-INTC",
+ .irq_ack = loongson1_irq_ack,
+ .irq_mask = loongson1_irq_mask,
+ .irq_mask_ack = loongson1_irq_mask_ack,
+ .irq_unmask = loongson1_irq_unmask,
+};
+
+static void loongson1_irq_dispatch(int n)
+{
+ u32 int_status, irq;
+
+ /* Get pending sources, masked by current enables */
+ int_status = __raw_readl(LS1_INTC_INTISR(n)) &
+ __raw_readl(LS1_INTC_INTIEN(n));
+
+ if (int_status) {
+ irq = LOONGSON1_IRQ(n, __ffs(int_status));
+ do_IRQ(irq);
+ }
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending;
+
+ pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+ if (pending & CAUSEF_IP7)
+ do_IRQ(TIMER_IRQ);
+ else if (pending & CAUSEF_IP2)
+ loongson1_irq_dispatch(0); /* INT0 */
+ else if (pending & CAUSEF_IP3)
+ loongson1_irq_dispatch(1); /* INT1 */
+ else if (pending & CAUSEF_IP4)
+ loongson1_irq_dispatch(2); /* INT2 */
+ else if (pending & CAUSEF_IP5)
+ loongson1_irq_dispatch(3); /* INT3 */
+ else if (pending & CAUSEF_IP6)
+ loongson1_irq_dispatch(4); /* INT4 */
+ else
+ spurious_interrupt();
+
+}
+
+struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .name = "cascade",
+ .flags = IRQF_NO_THREAD,
+};
+
+static void __init loongson1_irq_init(int base)
+{
+ int n;
+
+ /* Disable interrupts and clear pending,
+ * setup all IRQs as high level triggered
+ */
+ for (n = 0; n < 4; n++) {
+ __raw_writel(0x0, LS1_INTC_INTIEN(n));
+ __raw_writel(0xffffffff, LS1_INTC_INTCLR(n));
+ __raw_writel(0xffffffff, LS1_INTC_INTPOL(n));
+ __raw_writel(0x0, LS1_INTC_INTEDGE(n));
+ }
+
+
+ for (n = base; n < NR_IRQS; n++) {
+ irq_set_chip_and_handler(n, &loongson1_irq_chip,
+ handle_level_irq);
+ }
+
+ setup_irq(INT0_IRQ, &cascade_irqaction);
+ setup_irq(INT1_IRQ, &cascade_irqaction);
+ setup_irq(INT2_IRQ, &cascade_irqaction);
+ setup_irq(INT3_IRQ, &cascade_irqaction);
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ loongson1_irq_init(LOONGSON1_IRQ_BASE);
+}
diff --git a/arch/mips/loongson1/common/platform.c b/arch/mips/loongson1/common/platform.c
new file mode 100644
index 0000000..c93028e
--- /dev/null
+++ b/arch/mips/loongson1/common/platform.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/serial_8250.h>
+
+#include <loongson1.h>
+
+#define LOONGSON1_UART_PORT(_id) \
+ { \
+ .mapbase = LOONGSON1_UART ## _id ## _BASE, \
+ .membase = (void *)(LOONGSON1_UART ## _id ## _BASE), \
+ .irq = LOONGSON1_UART ## _id ## _IRQ, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, \
+ .type = PORT_16550A, \
+ }
+
+static struct plat_serial8250_port loongson1_serial8250_port[] = {
+ LOONGSON1_UART_PORT(0),
+ {},
+};
+
+struct platform_device loongson1_uart_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = loongson1_serial8250_port,
+ },
+};
+
+void __init loongson1_serial_setup(void)
+{
+ struct clk *clk;
+ struct plat_serial8250_port *p;
+
+ clk = clk_get(NULL, "dc");
+ if (IS_ERR(clk))
+ panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
+
+ for (p = loongson1_serial8250_port; p->flags != 0; ++p)
+ p->uartclk = clk_get_rate(clk);
+}
diff --git a/arch/mips/loongson1/common/prom.c b/arch/mips/loongson1/common/prom.c
new file mode 100644
index 0000000..70791f1
--- /dev/null
+++ b/arch/mips/loongson1/common/prom.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Modified from arch/mips/pnx833x/common/prom.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/bootinfo.h>
+
+#include <loongson1.h>
+#include <prom.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+unsigned long memsize, highmemsize;
+
+char *prom_getenv(char *envname)
+{
+ char **env = prom_envp;
+ int i;
+
+ i = strlen(envname);
+
+ while (*env) {
+ if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=')
+ return *env + i + 1;
+ env++;
+ }
+
+ return 0;
+}
+
+static inline unsigned long env_or_default(char *env, unsigned long dfl)
+{
+ char *str = prom_getenv(env);
+ return str ? simple_strtol(str, 0, 0) : dfl;
+}
+
+void __init prom_init_cmdline(void)
+{
+ char *c = &(arcs_cmdline[0]);
+ int i;
+
+ for (i = 1; i < prom_argc; i++) {
+ strcpy(c, prom_argv[i]);
+ c += strlen(prom_argv[i]);
+ if (i < prom_argc-1)
+ *c++ = ' ';
+ }
+ *c = 0;
+}
+
+void __init prom_init(void)
+{
+ prom_argc = fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
+
+ prom_init_cmdline();
+
+ memsize = env_or_default("memsize", DEFAULT_MEMSIZE);
+ highmemsize = env_or_default("highmemsize", 0x0);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+#define UART_BASE LOONGSON1_UART0_BASE
+#define PORT(base, offset) (u8 *)(base + offset)
+
+void __init prom_putchar(char c)
+{
+ int timeout;
+
+ timeout = 1024;
+
+ while (((readb(PORT(UART_BASE, UART_LSR)) & UART_LSR_THRE) == 0)
+ && (timeout-- > 0))
+ ;
+
+ writeb(c, PORT(UART_BASE, UART_TX));
+}
diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c
new file mode 100644
index 0000000..75f550f
--- /dev/null
+++ b/arch/mips/loongson1/common/reset.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+
+#include <loongson1.h>
+
+static void loongson1_restart(char *command)
+{
+ __raw_writel(0x1, LS1_WDT_EN);
+ __raw_writel(0x5000000, LS1_WDT_TIMER);
+ __raw_writel(0x1, LS1_WDT_SET);
+}
+
+static void loongson1_halt(void)
+{
+ pr_notice("\n\n** You can safely turn off the power now **\n\n");
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
+}
+
+static void loongson1_power_off(void)
+{
+ loongson1_halt();
+}
+
+static int __init loongson1_reboot_setup(void)
+{
+ _machine_restart = loongson1_restart;
+ _machine_halt = loongson1_halt;
+ pm_power_off = loongson1_power_off;
+
+ return 0;
+}
+
+arch_initcall(loongson1_reboot_setup);
diff --git a/arch/mips/loongson1/common/setup.c b/arch/mips/loongson1/common/setup.c
new file mode 100644
index 0000000..62128cc
--- /dev/null
+++ b/arch/mips/loongson1/common/setup.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bootinfo.h>
+
+#include <prom.h>
+
+void __init plat_mem_setup(void)
+{
+ add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+}
+
+const char *get_system_type(void)
+{
+ unsigned int processor_id = (¤t_cpu_data)->processor_id;
+
+ switch (processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON1B:
+ return "LOONGSON LS1B";
+ default:
+ return "LOONGSON (unknown)";
+ }
+}
diff --git a/arch/mips/loongson1/ls1b/Makefile b/arch/mips/loongson1/ls1b/Makefile
new file mode 100644
index 0000000..891eac4
--- /dev/null
+++ b/arch/mips/loongson1/ls1b/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for loongson1B based machines.
+#
+
+obj-y += board.o
diff --git a/arch/mips/loongson1/ls1b/board.c b/arch/mips/loongson1/ls1b/board.c
new file mode 100644
index 0000000..b1a602f
--- /dev/null
+++ b/arch/mips/loongson1/ls1b/board.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <platform.h>
+
+#include <linux/serial_8250.h>
+#include <loongson1.h>
+
+static struct platform_device *loongson1_platform_devices[] __initdata = {
+ &loongson1_uart_device,
+};
+
+static int __init loongson1_platform_init(void)
+{
+ int err;
+
+ loongson1_serial_setup();
+
+ err = platform_add_devices(loongson1_platform_devices,
+ ARRAY_SIZE(loongson1_platform_devices));
+ return err;
+}
+
+arch_initcall(loongson1_platform_init);
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index d1f2d4c..99216f0 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -89,6 +89,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
+ case CPU_LOONGSON1:
lmodel = &op_model_mipsxx_ops;
break;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 54759f1..03be670 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -365,6 +365,10 @@ static int __init mipsxx_init(void)
op_model_mipsxx_ops.cpu_type = "mips/sb1";
break;
+ case CPU_LOONGSON1:
+ op_model_mipsxx_ops.cpu_type = "mips/loongson1";
+ break;
+
default:
printk(KERN_ERR "Profiling unsupported for this CPU\n");
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists