lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 6 Oct 2011 14:10:55 -0400
From:	Jason Baron <jbaron@...hat.com>
To:	Jeremy Fitzhardinge <jeremy@...p.org>
Cc:	"H. Peter Anvin" <hpa@...or.com>,
	Steven Rostedt <rostedt@...dmis.org>,
	"David S. Miller" <davem@...emloft.net>,
	David Daney <david.daney@...ium.com>,
	Michael Ellerman <michael@...erman.id.au>,
	Jan Glauber <jang@...ux.vnet.ibm.com>,
	the arch/x86 maintainers <x86@...nel.org>,
	Xen Devel <xen-devel@...ts.xensource.com>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Jeremy Fitzhardinge <jeremy.fitzhardinge@...rix.com>,
	peterz@...radead.org, rth@...hat.com
Subject: Re: [PATCH RFC V2 3/5] jump_label: if a key has already been
 initialized, don't nop it out

On Thu, Oct 06, 2011 at 10:53:29AM -0700, Jeremy Fitzhardinge wrote:
> On 10/05/2011 05:17 PM, H. Peter Anvin wrote:
> > On 10/05/2011 05:16 PM, Jeremy Fitzhardinge wrote:
> >> On 10/04/2011 09:30 AM, H. Peter Anvin wrote:
> >>> On 10/04/2011 07:10 AM, Jason Baron wrote:
> >>>> 1) The jmp +0, is a 'safe' no-op that I know is going to initially
> >>>> boot for all x86. I'm not sure if there is a 5-byte nop that works on
> >>>> all x86 variants - but by using jmp +0, we make it much easier to debug
> >>>> cases where we may be using broken no-ops.
> >>>>
> >>> There are *plenty*.  jmp+0 is about as pessimal as you can get.
> >> As an aside, do you know if a 2-byte unconditional jmp is any more
> >> efficient than 5-byte, aside from just being a smaller instruction and
> >> taking less icache?
> >>
> > I don't know for sure, no.  I probably depends on the CPU.
> 
> Looks like jmp2 is about 5% faster than jmp5 on Sandybridge with this
> benchmark.
> 
> But insignificant difference on Nehalem.
> 
>     J

It would be cool if we could make the total width 2-bytes, when
possible.  It might be possible by making the initial 'JUMP_LABEL_INITIAL_NOP'
as a 'jmp' to the 'l_yes' label. And then patching that with a no-op at boot
time or link time - letting the compiler pick the width. In that way we could
get the optimal width...

thanks,

-Jason


> #include <stdio.h>
> 
> struct {
> 	unsigned char flag;
> 	unsigned char val;
> } l;
> 
> #define JMP2	asm volatile ("jmp 1f; .byte 0x0f,0x1f,0x00; 1: ");
> #define JMPJMP2	JMP2 JMP2
> #define JMPJMPJMP2	JMPJMP2 JMPJMP2
> #define JMPJMPJMP2	JMPJMP2 JMPJMP2
> #define JMPJMPJMPJMP2	JMPJMPJMP2 JMPJMPJMP2
> #define JMPJMPJMPJMPJMP2	JMPJMPJMPJMP2 JMPJMPJMPJMP2
> #define JMPJMPJMPJMPJMPJMP2	JMPJMPJMPJMPJMP2 JMPJMPJMPJMPJMP2
> 
> int main(int argc, char **argv)
> {
> 	int i;
> 
> 	for (i = 0; i < 100000000; i++) {
> 		JMPJMPJMPJMPJMPJMP2;
> 		asm volatile("" : : : "memory");
> 	}
> 
> 	return 0;
> }

> #include <stdio.h>
> 
> struct {
> 	unsigned char flag;
> 	unsigned char val;
> } l;
> 
> #define JMP5	asm volatile (".byte 0xe9; .long 0");
> #define JMPJMP5	JMP5 JMP5
> #define JMPJMPJMP5	JMPJMP5 JMPJMP5
> #define JMPJMPJMP5	JMPJMP5 JMPJMP5
> #define JMPJMPJMPJMP5	JMPJMPJMP5 JMPJMPJMP5
> #define JMPJMPJMPJMPJMP5	JMPJMPJMPJMP5 JMPJMPJMPJMP5
> #define JMPJMPJMPJMPJMPJMP5	JMPJMPJMPJMPJMP5 JMPJMPJMPJMPJMP5
> 
> int main(int argc, char **argv)
> {
> 	int i;
> 
> 	for (i = 0; i < 100000000; i++) {
> 		JMPJMPJMPJMPJMPJMP5;
> 		asm volatile("" : : : "memory");
> 	}
> 
> 	return 0;
> }

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ