| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 3 Dec 2011 23:22:59 +0800
From: "Ying-Chun Liu (PaulLiu)" <paul.liu@...aro.org>
To: linaro-dev@...ts.linaro.org, linux-kernel@...r.kernel.org
Cc: "Ying-Chun Liu (PaulLiu)" <paul.liu@...aro.org>,
Anson Huang <b20788@...escale.com>
Subject: [PATCH] thermal: Add anatop thermal driver
From: "Ying-Chun Liu (PaulLiu)" <paul.liu@...aro.org>
Anatop thermal driver for Freescale imx6 system. This driver currently
supports basic temperature reading.
Signed-off-by: Anson Huang <b20788@...escale.com>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@...aro.org>
---
drivers/thermal/Kconfig | 11 +
drivers/thermal/Makefile | 1 +
drivers/thermal/anatop_driver.h | 146 +++++++
drivers/thermal/anatop_thermal.c | 825 ++++++++++++++++++++++++++++++++++++++
4 files changed, 983 insertions(+), 0 deletions(-)
create mode 100644 drivers/thermal/anatop_driver.h
create mode 100644 drivers/thermal/anatop_thermal.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index f7f71b2..792152e 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -18,3 +18,14 @@ config THERMAL_HWMON
depends on THERMAL
depends on HWMON=y || HWMON=THERMAL
default y
+
+config THERMAL_ANATOP
+ tristate "Anatop Thermal Zone"
+ depends on THERMAL
+ default y
+ help
+ This driver supports ANATOP thermal zones. It is HIGHLY
+ recommended that this option be enabled on MX6 platform, as
+ your processor(s) may be damaged without it.
+
+ To compile this driver as a module, choose M here.
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 31108a0..2f88011 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -3,3 +3,4 @@
#
obj-$(CONFIG_THERMAL) += thermal_sys.o
+obj-$(CONFIG_THERMAL_ANATOP) += anatop_thermal.o
diff --git a/drivers/thermal/anatop_driver.h b/drivers/thermal/anatop_driver.h
new file mode 100644
index 0000000..5879fca
--- /dev/null
+++ b/drivers/thermal/anatop_driver.h
@@ -0,0 +1,146 @@
+/*
+ * anatop_drivers.h
+ *
+ * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@...el.com>
+ * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@...el.com>
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef __ANATOP_DRIVERS_H__
+#define __ANATOP_DRIVERS_H__
+
+/* Device */
+#define ANATOP_ACPI_MAX_HANDLES 10
+struct anatop_handle_list {
+ u32 count;
+ acpi_namespace_node * handles[ANATOP_ACPI_MAX_HANDLES];
+};
+
+struct anatop_device {
+ struct device dev;
+ acpi_namespace_node *handle; /* no handle for fixed hardware */
+ char name[40];
+ int id;
+ void *driver_data;
+};
+struct anatop_device_id {
+ __u8 id[ACPI_ID_LEN];
+ kernel_ulong_t driver_data;
+};
+typedef int (*anatop_op_add) (struct anatop_device *device);
+typedef int (*anatop_op_remove) (struct anatop_device *device, int type);
+typedef int (*anatop_op_start) (struct anatop_device *device);
+typedef int (*anatop_op_suspend) (struct anatop_device *device,
+ pm_message_t state);
+typedef int (*anatop_op_resume) (struct anatop_device *device);
+typedef int (*anatop_op_bind) (struct anatop_device *device);
+typedef int (*anatop_op_unbind) (struct anatop_device *device);
+typedef void (*anatop_op_notify) (struct anatop_device *device, u32 event);
+
+struct anatop_ops {
+ u32 anatop_op_add:1;
+ u32 anatop_op_start:1;
+};
+
+struct anatop_device_ops {
+ anatop_op_add add;
+ anatop_op_remove remove;
+ anatop_op_start start;
+ anatop_op_suspend suspend;
+ anatop_op_resume resume;
+ anatop_op_bind bind;
+ anatop_op_unbind unbind;
+ anatop_op_notify notify;
+};
+
+struct anatop_driver {
+ char name[80];
+ char class[80];
+ const struct acpi_device_id *ids; /* Supported Hardware IDs */
+ unsigned int flags;
+ struct anatop_device_ops ops;
+ struct device_driver drv;
+ struct module *owner;
+};
+
+
+
+typedef u32 anatop_status; /* All ANATOP Exceptions */
+
+#define AT_OK (anatop_status) 0x0000
+#define AT_ERROR (anatop_status) 0x0001
+
+
+#define ANATOP_MAX_STRING 80
+
+/*
+ * Please update drivers/acpi/debug.c and Documentation/acpi/debug.txt
+ * if you add to this list.
+ */
+#define ANATOP_BUS_COMPONENT 0x00010000
+#define ANATOP_AC_COMPONENT 0x00020000
+#define ANATOP_BATTERY_COMPONENT 0x00040000
+#define ANATOP_BUTTON_COMPONENT 0x00080000
+#define ANATOP_SBS_COMPONENT 0x00100000
+#define ANATOP_FAN_COMPONENT 0x00200000
+#define ANATOP_PCI_COMPONENT 0x00400000
+#define ANATOP_POWER_COMPONENT 0x00800000
+#define ANATOP_CONTAINER_COMPONENT 0x01000000
+#define ANATOP_SYSTEM_COMPONENT 0x02000000
+#define ANATOP_THERMAL_COMPONENT 0x04000000
+#define ANATOP_MEMORY_DEVICE_COMPONENT 0x08000000
+#define ANATOP_VIDEO_COMPONENT 0x10000000
+#define ANATOP_PROCESSOR_COMPONENT 0x20000000
+
+/*
+ * _HID definitions
+ * HIDs must conform to ACPI spec(6.1.4)
+ * Linux specific HIDs do not apply to this and begin with LNX:
+ */
+
+#define ANATOP_POWER_HID "LNXPOWER"
+#define ANATOP_PROCESSOR_OBJECT_HID "LNXCPU"
+#define ANATOP_SYSTEM_HID "LNXSYSTM"
+#define ANATOP_THERMAL_HID "LNXTHERM"
+#define ANATOP_BUTTON_HID_POWERF "LNXPWRBN"
+#define ANATOP_BUTTON_HID_SLEEPF "LNXSLPBN"
+#define ANATOP_VIDEO_HID "LNXVIDEO"
+#define ANATOP_BAY_HID "LNXIOBAY"
+#define ANATOP_DOCK_HID "LNXDOCK"
+/* Quirk for broken IBM BIOSes */
+#define ANATOP_SMBUS_IBM_HID "SMBUSIBM"
+
+/*
+ * For fixed hardware buttons, we fabricate acpi_devices with HID
+ * ACPI_BUTTON_HID_POWERF or ACPI_BUTTON_HID_SLEEPF. Fixed hardware
+ * signals only an event; it doesn't supply a notification value.
+ * To allow drivers to treat notifications from fixed hardware the
+ * same as those from real devices, we turn the events into this
+ * notification value.
+ */
+#define ANATOP_FIXED_HARDWARE_EVENT 0x100
+
+static inline void *anatop_driver_data(struct anatop_device *d)
+{
+ return d->driver_data;
+}
+
+#endif /*__ANATOP_DRIVERS_H__*/
diff --git a/drivers/thermal/anatop_thermal.c b/drivers/thermal/anatop_thermal.c
new file mode 100644
index 0000000..45d817a
--- /dev/null
+++ b/drivers/thermal/anatop_thermal.c
@@ -0,0 +1,825 @@
+/*
+ * anatop_thermal.c - anatop Thermal Zone Driver
+ *
+ * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@...el.com>
+ * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@...el.com>
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This driver fully implements the anatop thermal policy as described in the
+ * anatop 2.0 Specification.
+ *
+ * TBD: 1. Implement passive cooling hysteresis.
+ * 2. Enhance passive cooling (CPU) states/limit interface to support
+ * concepts of 'multiple limiters', upper/lower limits, etc.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/jiffies.h>
+#include <linux/kmod.h>
+#include <linux/reboot.h>
+#include <linux/device.h>
+#include <linux/uaccess.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include "anatop_driver.h"
+
+/* register define of anatop */
+#define HW_ANADIG_ANA_MISC0 (0x00000150)
+#define HW_ANADIG_ANA_MISC0_SET (0x00000154)
+#define HW_ANADIG_ANA_MISC0_CLR (0x00000158)
+#define HW_ANADIG_ANA_MISC0_TOG (0x0000015c)
+
+#define HW_ANADIG_TEMPSENSE0 (0x00000180)
+#define HW_ANADIG_TEMPSENSE0_SET (0x00000184)
+#define HW_ANADIG_TEMPSENSE0_CLR (0x00000188)
+#define HW_ANADIG_TEMPSENSE0_TOG (0x0000018c)
+
+#define HW_ANADIG_TEMPSENSE1 (0x00000190)
+#define HW_ANADIG_TEMPSENSE1_SET (0x00000194)
+#define HW_ANADIG_TEMPSENSE1_CLR (0x00000198)
+
+#define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008
+
+#define BP_ANADIG_TEMPSENSE0_TEMP_VALUE 8
+#define BM_ANADIG_TEMPSENSE0_TEMP_VALUE 0x000FFF00
+#define BF_ANADIG_TEMPSENSE0_TEMP_VALUE(v) \
+ (((v) << 8) & BM_ANADIG_TEMPSENSE0_TEMP_VALUE)
+#define BM_ANADIG_TEMPSENSE0_RSVD0 0x00000080
+#define BM_ANADIG_TEMPSENSE0_TEST 0x00000040
+#define BP_ANADIG_TEMPSENSE0_VBGADJ 3
+#define BM_ANADIG_TEMPSENSE0_VBGADJ 0x00000038
+#define BF_ANADIG_TEMPSENSE0_VBGADJ(v) \
+ (((v) << 3) & BM_ANADIG_TEMPSENSE0_VBGADJ)
+#define BM_ANADIG_TEMPSENSE0_FINISHED 0x00000004
+#define BM_ANADIG_TEMPSENSE0_MEASURE_TEMP 0x00000002
+#define BM_ANADIG_TEMPSENSE0_POWER_DOWN 0x00000001
+
+#define BP_ANADIG_TEMPSENSE1_RSVD0 16
+#define BM_ANADIG_TEMPSENSE1_RSVD0 0xFFFF0000
+#define BF_ANADIG_TEMPSENSE1_RSVD0(v) \
+ (((v) << 16) & BM_ANADIG_TEMPSENSE1_RSVD0)
+#define BP_ANADIG_TEMPSENSE1_MEASURE_FREQ 0
+#define BM_ANADIG_TEMPSENSE1_MEASURE_FREQ 0x0000FFFF
+#define BF_ANADIG_TEMPSENSE1_MEASURE_FREQ(v) \
+ (((v) << 0) & BM_ANADIG_TEMPSENSE1_MEASURE_FREQ)
+
+
+#define PREFIX "ANATOP: "
+
+#define ANATOP_THERMAL_DRIVER_NAME "Anatop Thermal"
+#define ANATOP_THERMAL_DEVICE_NAME "Thermal Zone"
+#define ANATOP_THERMAL_FILE_STATE "state"
+#define ANATOP_THERMAL_FILE_TEMPERATURE "temperature"
+#define ANATOP_THERMAL_FILE_TRIP_POINTS "trip_points"
+#define ANATOP_THERMAL_FILE_COOLING_MODE "cooling_mode"
+#define ANATOP_THERMAL_FILE_POLLING_FREQ "polling_frequency"
+#define ANATOP_THERMAL_NOTIFY_TEMPERATURE 0x80
+#define ANATOP_THERMAL_NOTIFY_THRESHOLDS 0x81
+#define ANATOP_THERMAL_NOTIFY_DEVICES 0x82
+#define ANATOP_THERMAL_NOTIFY_CRITICAL 0xF0
+#define ANATOP_THERMAL_NOTIFY_HOT 0xF1
+#define ANATOP_THERMAL_MODE_ACTIVE 0x00
+
+#define ANATOP_THERMAL_MAX_ACTIVE 10
+#define ANATOP_THERMAL_MAX_LIMIT_STR_LEN 65
+
+#define _COMPONENT ANATOP_THERMAL_COMPONENT
+#define POLLING_FREQ 20
+#define TEMP_CRITICAL_SHUTDOWN 380
+#define TEMP_CRITICAL_SLEEP 360
+#define TEMP_PASSIVE 320
+#define MEASURE_FREQ 327 /* 327 RTC clocks delay, 10ms */
+#define CONVER_CONST 1413 /* rough value, need calibration */
+#define CONVER_DIV_1024 550 /* div value, need calibration */
+
+MODULE_AUTHOR("Anson Huang");
+MODULE_DESCRIPTION("ANATOP Thermal Zone Driver");
+MODULE_LICENSE("GPL");
+
+static int psv;
+unsigned long anatop_base;
+
+module_param(psv, int, 0644);
+MODULE_PARM_DESC(psv, "Disable or override all passive trip points.");
+
+static int anatop_thermal_add(struct anatop_device *device);
+static int anatop_thermal_remove(struct platform_device *pdev);
+static int anatop_thermal_resume(struct platform_device *pdev);
+/* static void anatop_thermal_notify(struct anatop_device *device,
+ * u32 event); */
+static int anatop_thermal_power_on(void);
+static int anatop_thermal_power_down(void);
+
+static const struct anatop_device_id thermal_device_ids[] = {
+ {ANATOP_THERMAL_HID, 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(anatop, thermal_device_ids);
+
+struct anatop_thermal_state {
+ u8 critical:1;
+ u8 hot:1;
+ u8 passive:1;
+ u8 active:1;
+ u8 reserved:4;
+ int active_index;
+};
+
+struct anatop_thermal_state_flags {
+ u8 valid:1;
+ u8 enabled:1;
+ u8 reserved:6;
+};
+
+struct anatop_thermal_critical {
+ struct anatop_thermal_state_flags flags;
+ unsigned long temperature;
+};
+
+struct anatop_thermal_hot {
+ struct anatop_thermal_state_flags flags;
+ unsigned long temperature;
+};
+
+struct anatop_thermal_passive {
+ struct anatop_thermal_state_flags flags;
+ unsigned long temperature;
+ unsigned long tc1;
+ unsigned long tc2;
+ unsigned long tsp;
+};
+
+struct anatop_thermal_active {
+ struct anatop_thermal_state_flags flags;
+ unsigned long temperature;
+};
+
+struct anatop_thermal_trips {
+ struct anatop_thermal_critical critical;
+ struct anatop_thermal_hot hot;
+ struct anatop_thermal_passive passive;
+ struct anatop_thermal_active active[ANATOP_THERMAL_MAX_ACTIVE];
+};
+
+struct anatop_thermal_flags {
+ u8 cooling_mode:1; /* _SCP */
+ u8 devices:1; /* _TZD */
+ u8 reserved:6;
+};
+
+struct anatop_thermal {
+ struct anatop_device *device;
+ unsigned long temperature;
+ unsigned long last_temperature;
+ unsigned long polling_frequency;
+ u8 zombie;
+ struct anatop_thermal_flags flags;
+ struct anatop_thermal_state state;
+ struct anatop_thermal_trips trips;
+ struct anatop_handle_list devices;
+ struct thermal_zone_device *thermal_zone;
+ int tz_enabled;
+ int kelvin_offset;
+ struct mutex lock;
+};
+
+/* ---------------------------------------------
+ Thermal Zone Management
+ --------------------------------------------- */
+static int anatop_dump_temperature_register(void)
+{
+ if (!anatop_base) {
+ pr_info("anatop_base is not initialized!!!\n");
+ return -EINVAL;
+ }
+
+ pr_info("HW_ANADIG_TEMPSENSE0 = 0x%x\n",
+ __raw_readl(anatop_base + HW_ANADIG_TEMPSENSE0));
+ pr_info("HW_ANADIG_TEMPSENSE1 = 0x%x\n",
+ __raw_readl(anatop_base + HW_ANADIG_TEMPSENSE1));
+}
+
+static int anatop_tempsense_value_to_dc(int val)
+{
+ int val_dc;
+ val_dc = (CONVER_CONST - val) * CONVER_DIV_1024 / 1024;
+
+ return val_dc;
+}
+
+static int anatop_thermal_get_temperature(struct anatop_thermal *tz)
+{
+ unsigned int tmp = 300;
+ unsigned int reg;
+ unsigned int i;
+ if (!tz)
+ return -EINVAL;
+
+ tz->last_temperature = tz->temperature;
+
+ /* now we only using single measure, every time we measure
+ the temperature, we will power on/down the anadig module*/
+ anatop_thermal_power_on();
+
+ /* write measure freq */
+ reg = __raw_readl(anatop_base + HW_ANADIG_TEMPSENSE1);
+ reg &= ~BM_ANADIG_TEMPSENSE1_MEASURE_FREQ;
+ reg |= MEASURE_FREQ;
+ __raw_writel(reg, anatop_base + HW_ANADIG_TEMPSENSE1);
+
+ __raw_writel(BM_ANADIG_TEMPSENSE0_MEASURE_TEMP,
+ anatop_base + HW_ANADIG_TEMPSENSE0_CLR);
+ __raw_writel(BM_ANADIG_TEMPSENSE0_FINISHED,
+ anatop_base + HW_ANADIG_TEMPSENSE0_CLR);
+ __raw_writel(BM_ANADIG_TEMPSENSE0_MEASURE_TEMP,
+ anatop_base + HW_ANADIG_TEMPSENSE0_SET);
+
+ tmp = 0;
+ /* read five times of temperature values to get average*/
+ for (i = 0; i < 5; i++) {
+ while ((__raw_readl(anatop_base + HW_ANADIG_TEMPSENSE0)
+ & BM_ANADIG_TEMPSENSE0_FINISHED) == 0)
+ msleep(20);
+ reg = __raw_readl(anatop_base + HW_ANADIG_TEMPSENSE0);
+ tmp += (reg & BM_ANADIG_TEMPSENSE0_TEMP_VALUE)
+ >> BP_ANADIG_TEMPSENSE0_TEMP_VALUE;
+ __raw_writel(BM_ANADIG_TEMPSENSE0_FINISHED,
+ anatop_base + HW_ANADIG_TEMPSENSE0_CLR);
+ /* anatop_dump_temperature_register(); */
+ }
+
+ tmp = tmp / 5;
+ tz->temperature = anatop_tempsense_value_to_dc(tmp);
+
+ pr_debug("Temperature is %lu C\n", tz->temperature);
+ anatop_thermal_power_down();
+
+ return 0;
+}
+
+static int anatop_thermal_get_polling_frequency(struct anatop_thermal *tz)
+{
+ /* treat the polling interval as freq */
+ tz->polling_frequency = POLLING_FREQ;
+
+ return 0;
+}
+
+static int anatop_thermal_set_cooling_mode(struct anatop_thermal *tz, int mode)
+{
+
+ return 0;
+}
+
+#define ANATOP_TRIPS_CRITICAL 0x01
+#define ANATOP_TRIPS_HOT 0x02
+#define ANATOP_TRIPS_PASSIVE 0x04
+#define ANATOP_TRIPS_ACTIVE 0x08
+#define ANATOP_TRIPS_DEVICES 0x10
+
+#define ANATOP_TRIPS_INIT (ANATOP_TRIPS_CRITICAL | \
+ ANATOP_TRIPS_HOT | ANATOP_TRIPS_PASSIVE)
+
+static int anatop_thermal_trips_update(struct anatop_thermal *tz, int flag)
+{
+ /* Critical Shutdown */
+ if (flag & ANATOP_TRIPS_CRITICAL) {
+ tz->trips.critical.temperature = TEMP_CRITICAL_SHUTDOWN;
+ tz->trips.critical.flags.valid = 1;
+
+ }
+
+ /* Critical Sleep(HOT) (optional) */
+ if (flag & ANATOP_TRIPS_HOT) {
+ tz->trips.hot.temperature = TEMP_CRITICAL_SLEEP;
+ tz->trips.hot.flags.valid = 1;
+
+ }
+
+ /* Passive (optional) */
+ if (flag & ANATOP_TRIPS_PASSIVE) {
+ tz->trips.passive.temperature = TEMP_PASSIVE;
+ tz->trips.passive.flags.valid = 1;
+ }
+
+ return 0;
+}
+
+static int anatop_thermal_get_trip_points(struct anatop_thermal *tz)
+{
+ int i, valid, ret = anatop_thermal_trips_update(tz, ANATOP_TRIPS_INIT);
+
+ if (ret)
+ return ret;
+
+ valid = tz->trips.critical.flags.valid |
+ tz->trips.hot.flags.valid |
+ tz->trips.passive.flags.valid;
+
+ for (i = 0; i < ANATOP_THERMAL_MAX_ACTIVE; i++)
+ valid |= tz->trips.active[i].flags.valid;
+
+ if (!valid) {
+ printk(KERN_WARNING FW_BUG "No valid trip found\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static void anatop_thermal_check(void *data)
+{
+ struct anatop_thermal *tz = data;
+
+ thermal_zone_device_update(tz->thermal_zone);
+}
+
+/* sys I/F for generic thermal sysfs support */
+#define KELVIN_TO_CEL(t, off) (((t) - (off)))
+
+static int thermal_get_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
+{
+ struct anatop_thermal *tz = thermal->devdata;
+ int result;
+
+ if (!tz)
+ return -EINVAL;
+ result = 0;
+ result = anatop_thermal_get_temperature(tz);
+ *temp = tz->temperature;
+ if (result)
+ return result;
+ else
+ return 0;
+}
+static const char enabled[] = "kernel";
+static const char disabled[] = "user";
+static int thermal_get_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode *mode)
+{
+ struct anatop_thermal *tz = thermal->devdata;
+
+ if (!tz)
+ return -EINVAL;
+
+ *mode = tz->tz_enabled ? THERMAL_DEVICE_ENABLED :
+ THERMAL_DEVICE_DISABLED;
+
+ return 0;
+}
+
+static int thermal_set_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
+{
+ struct anatop_thermal *tz = thermal->devdata;
+ int enable;
+
+ if (!tz)
+ return -EINVAL;
+
+ /* enable/disable thermal management from thermal driver */
+ if (mode == THERMAL_DEVICE_ENABLED)
+ enable = 1;
+ else if (mode == THERMAL_DEVICE_DISABLED)
+ enable = 0;
+ else
+ return -EINVAL;
+
+ if (enable != tz->tz_enabled) {
+ tz->tz_enabled = enable;
+ /*
+ printk((KERN_INFO,
+ "%s anatop thermal control\n",
+ tz->tz_enabled ? enabled : disabled));
+ */
+ anatop_thermal_check(tz);
+ }
+ return 0;
+}
+
+static int thermal_get_trip_type(struct thermal_zone_device *thermal,
+ int trip, enum thermal_trip_type *type)
+{
+ struct anatop_thermal *tz = thermal->devdata;
+ int i;
+
+ if (!tz || trip < 0)
+ return -EINVAL;
+
+ if (tz->trips.critical.flags.valid) {
+ if (!trip) {
+ *type = THERMAL_TRIP_CRITICAL;
+ return 0;
+ }
+ trip--;
+ }
+
+ if (tz->trips.hot.flags.valid) {
+ if (!trip) {
+ *type = THERMAL_TRIP_HOT;
+ return 0;
+ }
+ trip--;
+ }
+
+ if (tz->trips.passive.flags.valid) {
+ if (!trip) {
+ *type = THERMAL_TRIP_PASSIVE;
+ return 0;
+ }
+ trip--;
+ }
+
+ for (i = 0; i < ANATOP_THERMAL_MAX_ACTIVE &&
+ tz->trips.active[i].flags.valid; i++) {
+ if (!trip) {
+ *type = THERMAL_TRIP_ACTIVE;
+ return 0;
+ }
+ trip--;
+ }
+
+ return -EINVAL;
+}
+
+static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
+ int trip, unsigned long *temp)
+{
+ struct anatop_thermal *tz = thermal->devdata;
+ int i;
+
+ if (!tz || trip < 0)
+ return -EINVAL;
+ if (tz->trips.critical.flags.valid) {
+ if (!trip) {
+ *temp = KELVIN_TO_CEL(
+ tz->trips.critical.temperature,
+ tz->kelvin_offset);
+ return 0;
+ }
+ trip--;
+ }
+
+ if (tz->trips.hot.flags.valid) {
+ if (!trip) {
+ *temp = KELVIN_TO_CEL(
+ tz->trips.hot.temperature,
+ tz->kelvin_offset);
+ return 0;
+ }
+ trip--;
+ }
+
+ if (tz->trips.passive.flags.valid) {
+ if (!trip) {
+ *temp = KELVIN_TO_CEL(
+ tz->trips.passive.temperature,
+ tz->kelvin_offset);
+ return 0;
+ }
+ trip--;
+ }
+
+ for (i = 0; i < ANATOP_THERMAL_MAX_ACTIVE &&
+ tz->trips.active[i].flags.valid; i++) {
+ if (!trip) {
+ *temp = KELVIN_TO_CEL(
+ tz->trips.active[i].temperature,
+ tz->kelvin_offset);
+ return 0;
+ }
+ trip--;
+ }
+
+ return -EINVAL;
+}
+
+static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
+ unsigned long *temperature) {
+ struct anatop_thermal *tz = thermal->devdata;
+
+ if (tz->trips.critical.flags.valid) {
+ *temperature = KELVIN_TO_CEL(
+ tz->trips.critical.temperature,
+ tz->kelvin_offset);
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+static int thermal_notify(struct thermal_zone_device *thermal, int trip,
+ enum thermal_trip_type trip_type)
+{
+ u8 type = 0;
+ /* struct anatop_thermal *tz = thermal->devdata; */
+
+ if (trip_type == THERMAL_TRIP_CRITICAL)
+ type = ANATOP_THERMAL_NOTIFY_CRITICAL;
+ else if (trip_type == THERMAL_TRIP_HOT)
+ type = ANATOP_THERMAL_NOTIFY_HOT;
+ else
+ return 0;
+/*
+ if (trip_type == THERMAL_TRIP_CRITICAL && nocrt)
+ return 1;
+*/
+ return 0;
+}
+
+typedef int (*cb)(struct thermal_zone_device *, int,
+ struct thermal_cooling_device *);
+static int anatop_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev,
+ cb action)
+{
+ /* struct anatop_thermal *tz = thermal->devdata; */
+
+ int result = 0;
+
+ return result;
+}
+
+static int
+anatop_thermal_bind_cooling_device(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ return anatop_thermal_cooling_device_cb(thermal, cdev,
+ thermal_zone_bind_cooling_device);
+}
+
+static int
+anatop_thermal_unbind_cooling_device(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ return anatop_thermal_cooling_device_cb(thermal, cdev,
+ thermal_zone_unbind_cooling_device);
+}
+
+static struct thermal_zone_device_ops anatop_thermal_zone_ops = {
+ .bind = anatop_thermal_bind_cooling_device,
+ .unbind = anatop_thermal_unbind_cooling_device,
+ .get_temp = thermal_get_temp,
+ .get_mode = thermal_get_mode,
+ .set_mode = thermal_set_mode,
+ .get_trip_type = thermal_get_trip_type,
+ .get_trip_temp = thermal_get_trip_temp,
+ .get_crit_temp = thermal_get_crit_temp,
+ .notify = thermal_notify,
+};
+
+static int anatop_thermal_register_thermal_zone(struct anatop_thermal *tz)
+{
+ int trips = 0;
+ int i;
+
+ if (tz->trips.critical.flags.valid)
+ trips++;
+
+ if (tz->trips.hot.flags.valid)
+ trips++;
+
+ if (tz->trips.passive.flags.valid)
+ trips++;
+
+ for (i = 0; i < ANATOP_THERMAL_MAX_ACTIVE
+ && tz->trips.active[i].flags.valid; i++, trips++)
+ ;
+
+ if (tz->trips.passive.flags.valid)
+ tz->thermal_zone =
+ thermal_zone_device_register("anatoptz", trips, tz,
+ &anatop_thermal_zone_ops,
+ tz->trips.passive.tc1,
+ tz->trips.passive.tc2,
+ tz->trips.passive.tsp*100,
+ tz->polling_frequency*100);
+ else
+ tz->thermal_zone =
+ thermal_zone_device_register("anatoptz", trips, tz,
+ &anatop_thermal_zone_ops,
+ 0, 0, 0,
+ tz->polling_frequency*100);
+#if 0
+ result = sysfs_create_link(&tz->device->dev.kobj,
+ &tz->thermal_zone->device.kobj, "thermal_zone");
+ if (result)
+ return result;
+
+ result = sysfs_create_link(&tz->thermal_zone->device.kobj,
+ &tz->device->dev.kobj, "device");
+ if (result)
+ return result;
+#endif
+
+ tz->tz_enabled = 1;
+
+ dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
+ tz->thermal_zone->id);
+ return 0;
+}
+/*
+static void anatop_thermal_unregister_thermal_zone(struct anatop_thermal *tz)
+{
+ sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
+ sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
+ thermal_zone_device_unregister(tz->thermal_zone);
+ tz->thermal_zone = NULL;
+}
+*/
+
+/* --------------------------------------------------------------
+ Driver Interface
+ ------------------------------------------------------------- */
+static int anatop_thermal_get_info(struct anatop_thermal *tz)
+{
+ int result = 0;
+
+ if (!tz)
+ return -EINVAL;
+
+ /* Get temperature [_TMP] (required) */
+ result = anatop_thermal_get_temperature(tz);
+ if (result)
+ return result;
+
+ /* Get trip points [_CRT, _PSV, etc.] (required) */
+ result = anatop_thermal_get_trip_points(tz);
+ if (result)
+ return result;
+
+ /* Set the cooling mode [_SCP] to active cooling (default) */
+ result = anatop_thermal_set_cooling_mode(tz,
+ ANATOP_THERMAL_MODE_ACTIVE);
+ if (!result)
+ tz->flags.cooling_mode = 1;
+
+ /* Get default polling frequency [_TZP] (optional) */
+ anatop_thermal_get_polling_frequency(tz);
+
+ return 0;
+}
+
+static void anatop_thermal_guess_offset(struct anatop_thermal *tz)
+{
+ tz->kelvin_offset = 273;
+}
+
+static int anatop_thermal_add(struct anatop_device *device)
+{
+ int result = 0;
+ struct anatop_thermal *tz = NULL;
+ if (!device)
+ return -EINVAL;
+
+ tz = kzalloc(sizeof(struct anatop_thermal), GFP_KERNEL);
+ if (!tz)
+ return -ENOMEM;
+
+ tz->device = device;
+ strcpy(device->name, ANATOP_THERMAL_DEVICE_NAME);
+ device->driver_data = tz;
+ mutex_init(&tz->lock);
+
+ result = anatop_thermal_get_info(tz);
+ if (result)
+ goto free_memory;
+
+ anatop_thermal_guess_offset(tz);
+
+ result = anatop_thermal_register_thermal_zone(tz);
+ if (result)
+ goto free_memory;
+
+ goto end;
+
+free_memory:
+ kfree(tz);
+end:
+ return result;
+}
+static int anatop_thermal_remove(struct platform_device *pdev)
+{
+ /* struct anatop_device *device = platform_get_drvdata(pdev); */
+ return 0;
+}
+
+static int anatop_thermal_resume(struct platform_device *pdev)
+{
+
+ return 0;
+}
+static int anatop_thermal_power_on(void)
+{
+ __raw_writel(BM_ANADIG_TEMPSENSE0_POWER_DOWN,
+ anatop_base + HW_ANADIG_TEMPSENSE0_CLR);
+
+ __raw_writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF,
+ anatop_base + HW_ANADIG_ANA_MISC0_SET);
+ return 0;
+}
+
+static int anatop_thermal_power_down(void)
+{
+ __raw_writel(BM_ANADIG_TEMPSENSE0_POWER_DOWN,
+ anatop_base + HW_ANADIG_TEMPSENSE0_SET);
+
+ __raw_writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF,
+ anatop_base + HW_ANADIG_ANA_MISC0_CLR);
+ return 0;
+}
+
+static int anatop_thermal_probe(struct platform_device *pdev)
+{
+ int retval = 0;
+ struct resource *res;
+ void __iomem *base;
+
+ struct anatop_device *device;
+ device = kzalloc(sizeof(*device), GFP_KERNEL);
+ if (!device) {
+ retval = -ENOMEM;
+ goto device_alloc_failed;
+ }
+
+ platform_set_drvdata(pdev, device);
+
+ /* ioremap the base address */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No anatop base address provided\n");
+ goto anatop_failed;
+ }
+
+ base = ioremap(res->start, res->end - res->start);
+ if (base == NULL) {
+ dev_err(&pdev->dev, "failed to rebase anatop base address\n");
+ goto anatop_failed;
+ }
+ anatop_base = (unsigned long)base;
+
+ anatop_thermal_add(device);
+
+ goto success;
+anatop_failed:
+ kfree(device);
+device_alloc_failed:
+success:
+ pr_info("%s\n", __func__);
+ return retval;
+}
+static int anatop_thermal_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ return 0;
+}
+
+static struct platform_driver anatop_thermal_driver_ldm = {
+ .driver = {
+ .name = "anatop_thermal",
+ .bus = &platform_bus_type,
+ },
+ .probe = anatop_thermal_probe,
+ .remove = anatop_thermal_remove,
+ .suspend = anatop_thermal_suspend,
+ .resume = anatop_thermal_resume,
+};
+
+static int __init anatop_thermal_init(void)
+{
+ pr_debug("Anatop Thermal driver loading\n");
+ return platform_driver_register(&anatop_thermal_driver_ldm);
+}
+
+static void __exit anatop_thermal_exit(void)
+{
+ platform_driver_unregister(&anatop_thermal_driver_ldm);
+ pr_debug("Anatop Thermal driver successfully unloaded\n");
+}
+
+module_init(anatop_thermal_init);
+module_exit(anatop_thermal_exit);
--
1.7.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists