lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Sun, 4 Dec 2011 17:11:23 +0100 From: Sascha Hauer <s.hauer@...gutronix.de> To: Dong Aisheng <b29396@...escale.com> Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linus.walleij@...ricsson.com, shawn.guo@...escale.com, kernel@...gutronix.de Subject: Re: [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support On Sun, Dec 04, 2011 at 07:49:43PM +0800, Dong Aisheng wrote: > Signed-off-by: Dong Aisheng <b29396@...escale.com> > Cc: Linus Walleij <linus.walleij@...aro.org> > Cc: Sascha Hauer <s.hauer@...gutronix.de> > Cc: Shawn Guo <shanw.guo@...escale.com> > --- > drivers/pinctrl/pinmux-imx53.c | 514 ++++++++++++++++++++++++++++++++++++++++ > 1 files changed, 514 insertions(+), 0 deletions(-) > > diff --git a/drivers/pinctrl/pinmux-imx53.c b/drivers/pinctrl/pinmux-imx53.c > + > +/* mx53 pin groups and mux mode */ > +static const unsigned mx53_fec_pins[] = { > + MX53_FEC_MDC, > + MX53_FEC_MDIO, > + MX53_FEC_REF_CLK, > + MX53_FEC_RX_ER, > + MX53_FEC_CRS_DV, > + MX53_FEC_RXD1, > + MX53_FEC_RXD0, > + MX53_FEC_TX_EN, > + MX53_FEC_TXD1, > + MX53_FEC_TXD0, > +}; > +static const unsigned mx53_fec_mux[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; The FEC_MDC could be routed to PAD_KEY_ROW2 or to PAD_FEC_MDC. Also FEC_MDIO could be routed to either PAD_FEC_MDIO or to PAD_KEY_COL2. For other fec pins also different options might exist. How does this fit into this group scheme? > + > +static const unsigned mx53_sd1_pins[] = { > + MX53_SD1_CMD, > + MX53_SD1_CLK, > + MX53_SD1_DATA0, > + MX53_SD1_DATA1, > + MX53_SD1_DATA2, > + MX53_SD1_DATA3, > + > +}; > +static const unsigned mx53_sd1_mux[] = { 0, 0, 0, 0, 0, 0 }; > + > +static const unsigned mx53_sd3_pins[] = { > + MX53_PATA_DATA8, > + MX53_PATA_DATA9, > + MX53_PATA_DATA10, > + MX53_PATA_DATA11, > + MX53_PATA_DATA0, > + MX53_PATA_DATA1, > + MX53_PATA_DATA2, > + MX53_PATA_DATA3, > + MX53_PATA_IORDY, > + MX53_PATA_RESET_B, > + > +}; > +static const unsigned mx53_sd3_mux[] = { 4, 4, 4, 4, 4, 4, 4, 4, 2, 2 }; > + > +static const unsigned mx53_uart1_pins[] = { > + MX53_CSI0_DAT10, > + MX53_CSI0_DAT11, > +}; > +static const unsigned mx53_uart1_mux[] = { 2, 2 }; For uart1 indeed only one routing possibility exists, but look at uart2: uart2 txd -> PAD_EIM_D26 -> PAD_PATA_DMARQ -> PAD_GPIO_7 uart2 rxd -> PAD_EIM_D27 -> PAD_PATA_BUFFER_EN -> PAD_GPIO_8 So this at least means that you should not name the array above mx53_uart1_mux, but something like mx53_uart1_option1, mx53_uart1_option2 and so on. Then it's probably possible to use mixtures of different options for the uart. I don't think that this grouping of pads to their functions makes sense. On i.MX every pad is muxed independently and not in groups. Which pins belong to which function is board specific and not SoC specific. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists