| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 04 Jan 2012 22:48:09 -0500
From: Steven Rostedt <rostedt@...dmis.org>
To: linux-kernel@...r.kernel.org
Cc: Linus Torvalds <torvalds@...ux-foundation.org>
Subject: [PATCH 14/20] ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST
From: Steven Rostedt <srostedt@...hat.com>
For machines that do no use grub, it may be needed to update an
external image (tftp) before doing a reboot into either the
test image or the known good image.
The option SWITCH_TO_GOOD is added, where if it is defined, the
command that is specified as its value will be executed before
doing a reboot into a known good image.
The option SWITCH_TO_TEST is added, where if it is defined, the
command that is specified as its value will be executed before
doing a reboot into the test image.
Signed-off-by: Steven Rostedt <rostedt@...dmis.org>
---
tools/testing/ktest/ktest.pl | 33 ++++++++++++++++++++++++++-------
tools/testing/ktest/sample.conf | 21 +++++++++++++++++++++
2 files changed, 47 insertions(+), 7 deletions(-)
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 47c2814..ff21e92 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -79,6 +79,8 @@ my $reboot_script;
my $power_cycle;
my $reboot;
my $reboot_on_error;
+my $switch_to_good;
+my $switch_to_test;
my $poweroff_on_error;
my $die_on_failure;
my $powercycle_after_reboot;
@@ -964,6 +966,17 @@ sub reboot {
}
}
+sub reboot_to_good {
+ my ($time) = @_;
+
+ if (defined($switch_to_good)) {
+ run_command $switch_to_good;
+ return;
+ }
+
+ reboot $time;
+}
+
sub do_not_reboot {
my $i = $iteration;
@@ -980,7 +993,7 @@ sub dodie {
if ($reboot_on_error && !do_not_reboot) {
doprint "REBOOTING\n";
- reboot;
+ reboot_to_good;
} elsif ($poweroff_on_error && defined($power_off)) {
doprint "POWERING OFF\n";
@@ -1116,7 +1129,7 @@ sub fail {
# no need to reboot for just building.
if (!do_not_reboot) {
doprint "REBOOTING\n";
- reboot $sleep_time;
+ reboot_to_good $sleep_time;
}
my $name = "";
@@ -1269,6 +1282,10 @@ sub wait_for_input
}
sub reboot_to {
+ if (defined($switch_to_test)) {
+ run_command $switch_to_test;
+ }
+
if ($reboot_type eq "grub") {
run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
reboot;
@@ -1754,7 +1771,7 @@ sub success {
if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
doprint "Reboot and wait $sleep_time seconds\n";
- reboot $sleep_time;
+ reboot_to_good $sleep_time;
}
}
@@ -1935,7 +1952,7 @@ sub run_git_bisect {
sub bisect_reboot {
doprint "Reboot and sleep $bisect_sleep_time seconds\n";
- reboot $bisect_sleep_time;
+ reboot_to_good $bisect_sleep_time;
}
# returns 1 on success, 0 on failure, -1 on skip
@@ -2528,7 +2545,7 @@ sub config_bisect {
sub patchcheck_reboot {
doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
- reboot $patchcheck_sleep_time;
+ reboot_to_good $patchcheck_sleep_time;
}
sub patchcheck {
@@ -3145,7 +3162,7 @@ sub make_min_config {
}
doprint "Reboot and wait $sleep_time seconds\n";
- reboot $sleep_time;
+ reboot_to_good $sleep_time;
}
success $i;
@@ -3314,6 +3331,8 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$no_install = set_test_option("NO_INSTALL", $i);
$reboot_script = set_test_option("REBOOT_SCRIPT", $i);
$reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i);
+ $switch_to_good = set_test_option("SWITCH_TO_GOOD", $i);
+ $switch_to_test = set_test_option("SWITCH_TO_TEST", $i);
$poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i);
$die_on_failure = set_test_option("DIE_ON_FAILURE", $i);
$power_off = set_test_option("POWER_OFF", $i);
@@ -3472,7 +3491,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
if ($opt{"POWEROFF_ON_SUCCESS"}) {
halt;
} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot) {
- reboot;
+ reboot_to_good;
}
doprint "\n $successes of $opt{NUM_TESTS} tests were successful\n\n";
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index 2ff0f8c..c8dc757 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -468,6 +468,27 @@
# The test will not modify that file.
#REBOOT_TYPE = grub
+# If you are using a machine that doesn't boot with grub, and
+# perhaps gets its kernel from a remote server (tftp), then
+# you can use this option to update the target image with the
+# test image.
+#
+# You could also do the same with POST_INSTALL, but the difference
+# between that option and this option is that POST_INSTALL runs
+# after the install, where this one runs just before a reboot.
+# (default undefined)
+#SWITCH_TO_TEST = cp ${OUTPUT_DIR}/${BUILD_TARGET} ${TARGET_IMAGE}
+
+# If you are using a machine that doesn't boot with grub, and
+# perhaps gets its kernel from a remote server (tftp), then
+# you can use this option to update the target image with the
+# the known good image to reboot safely back into.
+#
+# This option holds a command that will execute before needing
+# to reboot to a good known image.
+# (default undefined)
+#SWITCH_TO_GOOD = ssh ${SSH_USER}/${MACHINE} cp good_image ${TARGET_IMAGE}
+
# The min config that is needed to build for the machine
# A nice way to create this is with the following:
#
--
1.7.7.3
Download attachment "signature.asc" of type "application/pgp-signature" (837 bytes)
Powered by blists - more mailing lists