| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 21 Jan 2012 01:52:13 -0800
From: Yinghai Lu <yinghai@...nel.org>
To: Jesse Barnes <jbarnes@...tuousgeek.org>
Cc: Linus Torvalds <torvalds@...ux-foundation.org>,
Kenji Kaneshige <kaneshige.kenji@...fujitsu.com>,
Matthew Wilcox <matthew@....cx>, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org, Yinghai Lu <yinghai@...nel.org>
Subject: [PATCH 1/7] PCI: Make sriov work with hotplug remove
When hot remove pci express module that have pcie switch and support SRIOV, got
[ 5918.610127] pciehp 0000:80:02.2:pcie04: pcie_isr: intr_loc 1
[ 5918.615779] pciehp 0000:80:02.2:pcie04: Attention button interrupt received
[ 5918.622730] pciehp 0000:80:02.2:pcie04: Button pressed on Slot(3)
[ 5918.629002] pciehp 0000:80:02.2:pcie04: pciehp_get_power_status: SLOTCTRL a8 value read 1f9
[ 5918.637416] pciehp 0000:80:02.2:pcie04: PCI slot #3 - powering off due to button press.
[ 5918.647125] pciehp 0000:80:02.2:pcie04: pcie_isr: intr_loc 10
[ 5918.653039] pciehp 0000:80:02.2:pcie04: pciehp_green_led_blink: SLOTCTRL a8 write cmd 200
[ 5918.661229] pciehp 0000:80:02.2:pcie04: pciehp_set_attention_status: SLOTCTRL a8 write cmd c0
[ 5924.667627] pciehp 0000:80:02.2:pcie04: Disabling domain:bus:device=0000:b0:00
[ 5924.674909] pciehp 0000:80:02.2:pcie04: pciehp_get_power_status: SLOTCTRL a8 value read 2f9
[ 5924.683262] pciehp 0000:80:02.2:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:b0:00
[ 5924.693976] libfcoe_device_notification: NETDEV_UNREGISTER eth6
[ 5924.764979] libfcoe_device_notification: NETDEV_UNREGISTER eth14
[ 5924.873539] libfcoe_device_notification: NETDEV_UNREGISTER eth15
[ 5924.995209] libfcoe_device_notification: NETDEV_UNREGISTER eth16
[ 5926.114407] sxge 0000:b2:00.0: PCI INT A disabled
[ 5926.119342] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 5926.127189] IP: [<ffffffff81353a3b>] pci_stop_bus_device+0x33/0x83
[ 5926.133377] PGD 0
[ 5926.135402] Oops: 0000 [#1] SMP
[ 5926.138659] CPU 2
[ 5926.140499] Modules linked in:
...
[ 5926.143754]
[ 5926.275823] Call Trace:
[ 5926.278267] [<ffffffff81353a38>] pci_stop_bus_device+0x30/0x83
[ 5926.284180] [<ffffffff81353af4>] pci_remove_bus_device+0x1a/0xba
[ 5926.290264] [<ffffffff81366311>] pciehp_unconfigure_device+0x110/0x17b
[ 5926.296866] [<ffffffff81365dd9>] ? pciehp_disable_slot+0x188/0x188
[ 5926.303123] [<ffffffff81365d6f>] pciehp_disable_slot+0x11e/0x188
[ 5926.309206] [<ffffffff81365e68>] pciehp_power_thread+0x8f/0xe0
...
+-[0000:80]-+-00.0-[81-8f]--
| +-01.0-[90-9f]--
| +-02.0-[a0-af]--
| +-02.2-[b0-bf]----00.0-[b1-b3]--+-02.0-[b2]--+-00.0 Device
| | | +-00.1 Device
| | | +-00.2 Device
| | | \-00.3 Device
| | \-03.0-[b3]--+-00.0 Device
| | +-00.1 Device
| | +-00.2 Device
| | \-00.3 Device
root complex: 80:02.2
pci express modules: have pcie switch and are listed as b0:00.0, b1:02.0 and b1:03.0.
end devices are b2:00.0 and b3.00.0.
VFs are: b2:00.1,... b2:00.3, and b3:00.1,...,b3:00.3
Root cause: when doing pci_stop_bus_device() with phys fn, it will stop virt fn and
remove the fn, so
list_for_each_safe(l, n, &bus->devices)
will have problem to refer freed n that is pointed to vf entry.
Solution is just replacing list_for_each_safe() with list_for_each().
pci_stop_bus_device(dev) will not remove dev from bus->devices list,
so We only need use for_each here.
During reviewing the patch, Bjorn said:
| The PCI hot-remove path calls pci_stop_bus_devices() via
| pci_remove_bus_device().
|
| pci_stop_bus_devices() traverses the bus->devices list (point A below),
| stopping each device in turn, which calls the driver remove() method. When
| the device is an SR-IOV PF, the driver calls pci_disable_sriov(), which
| also uses pci_remove_bus_device() to remove the VF devices from the
| bus->devices list (point B).
|
| pci_remove_bus_device
| pci_stop_bus_device
| pci_stop_bus_devices(subordinate)
| list_for_each(bus->devices) <-- A
| pci_stop_bus_device(PF)
| ...
| driver->remove
| pci_disable_sriov
| ...
| pci_remove_bus_device(VF)
| <remove from bus_list> <-- B
|
| At B, we're changing the same list we're iterating through at A, so when
| the driver remove() method returns, the pci_stop_bus_devices() iterator has
| a pointer to a list entry that has already been freed.
Discussion thread can be found : https://lkml.org/lkml/2011/10/15/141
-v2: updated changelog.
-v3: According to Kenji, do not allocate another list for PF.
Also We don't need to check dev->is_virtfn anymore, because PF should come
first in the list, and even VF come first, it is still ok.
-v4: According to Kenji, expand list_for_each(), and add is_virtfn checking
Signed-off-by: Yinghai Lu <yinghai@...nel.org>
---
drivers/pci/remove.c | 28 +++++++++++++++++++++++++++-
1 files changed, 27 insertions(+), 1 deletions(-)
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 7f87bee..932c5e2 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -123,10 +123,36 @@ void pci_remove_behind_bridge(struct pci_dev *dev)
static void pci_stop_bus_devices(struct pci_bus *bus)
{
struct list_head *l, *n;
+ struct list_head *head = &bus->devices;
+ /*
+ * pci_stop_bus_device(dev) will not remove dev from bus->devices list,
+ * so We don't need use _safe version for_each here.
+ * Also _safe version has problem when pci_stop_bus_device() for PF try
+ * to remove VFs.
+ */
+ for (l = head->next; l != head;) {
+ struct pci_dev *dev = pci_dev_b(l);
+
+ /*
+ * VFs are removed by pci_remove_bus_device() in the
+ * pci_stop_bus_devices() code path for PF.
+ * aka, bus->devices get updated in the process.
+ * barrier() will make sure we get right next from that list.
+ */
+ if (!dev->is_virtfn) {
+ pci_stop_bus_device(dev);
+ barrier();
+ }
+ l = l->next;
+ }
+
+ /* For left over VFs in case */
list_for_each_safe(l, n, &bus->devices) {
struct pci_dev *dev = pci_dev_b(l);
- pci_stop_bus_device(dev);
+
+ if (dev->is_virtfn)
+ pci_stop_bus_device(dev);
}
}
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists