linux-kernel - Re: Regression 3.2 -> 3.3-rc1 10 sec hang at boot and resume, COMRESET failed

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 02 Feb 2012 14:08:22 +0530
From:	"Srivatsa S. Bhat" <srivatsa.bhat@...ux.vnet.ibm.com>
To:	Norbert Preining <preining@...ic.at>
CC:	linux-kernel@...r.kernel.org, jeff@...zik.org,
	Lin Ming <ming.m.lin@...el.com>, Tejun Heo <tj@...nel.org>,
	"stern@...land.harvard.edu >> Alan Stern" <stern@...land.harvard.edu>,
	linux-ide@...r.kernel.org,
	Linux PM mailing list <linux-pm@...r.kernel.org>,
	"Rafael J. Wysocki" <rjw@...k.pl>
Subject: Re: Regression 3.2 -> 3.3-rc1 10 sec hang at boot and resume, COMRESET
 failed

Adding some Cc's.

On 02/02/2012 10:42 AM, Norbert Preining wrote:

> Dear all,
> 
> (please Cc)
> 
> since going from 3.2 to 3.3-rc1 I see a kind of regression wrt booting
> time, namely the detection of the CD drive hangs for 10sec (both
> dmesg were taken on the same hardware on the same day):
> 
> with 3.3-rc1 and rc2:
> [    3.694012] sd 0:0:0:0: [sda] Attached SCSI disk
> [    9.004013] ata2: link is slow to respond, please be patient (ready=0)
> [   13.652013] ata2: COMRESET failed (errno=-16)
> [   13.972022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [   13.975721] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [   13.977166] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.21, max UDMA/33
> [   13.981294] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [   13.982734] ata2.00: configured for UDMA/33
> [   13.987964] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ862AS  1.21 PQ: 0 ANSI: 5
> [   13.991482] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> [   13.992971] cdrom: Uniform CD-ROM driver Revision: 3.20
> [   13.994574] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [   13.994672] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [   14.316021] ata5: SATA link down (SStatus 0 SControl 300)
> [   14.636019] ata6: SATA link down (SStatus 0 SControl 300)
> 
> with 3.2:
> [    3.218156] sd 0:0:0:0: [sda] Attached SCSI disk
> [    3.484023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [    3.487708] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [    3.489156] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.21, max UDMA/33
> [    3.494321] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [    3.495761] ata2.00: configured for UDMA/33
> [    3.501057] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ862AS  1.21 PQ: 0 ANSI: 5
> [    3.504515] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> [    3.505995] cdrom: Uniform CD-ROM driver Revision: 3.20
> [    3.507611] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [    3.507715] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [    3.828025] ata5: SATA link down (SStatus 0 SControl 300)
> [    4.148020] ata6: SATA link down (SStatus 0 SControl 300)
> 
> 
> Is there anything I can do here?
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/