| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 16 Feb 2012 16:57:59 -0800
From: Darren Hart <dvhart@...ux.intel.com>
To: "lkml, " <linux-kernel@...r.kernel.org>
CC: Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Alan Cox <alan@...ux.intel.com>, linux-serial@...r.kernel.org
Subject: pch_uart and pch_phub clock selection
I'm working on a tunnel creek (atom e6xx + topcliff PCH) development platform
that uses a 48MHz or 64MHz clock to drive the pch_uart. I've found that if I
force the uart_clock to 48MHz (or 64MHz on the latest rev) I can get the kernel
messages and getty on the serial port.
I see that the the CM-iTC board is special-cased to set a 192MHz uart_clock.
This is done in pch_uart.c code, but there is some register manipulation done in
the pch_phub.c driver and I don't understand the connection. How are the two
related?
Is the pch_phub.c register manipulation required for proper related? It seems to
work without touching those registers if I just force the clock.
The device I'm working with is EFI, and the dmi_get_system_info(DMI_BOARD_NAME)
returns "(null)", so I can't use the same test to identify this board. Is there
another common mechanism I might be able to use?
The following patch (by way of example, not meant for inclusion) gets things
working for this particular board with this command line:
console=ttyPCH1,115200 pch_uart.clock_param=48000000
I believe the right thing to do here is to discover a way to identify the board
and special case the clock as is done for the CM-iTC, but I would like to
understand the purpose of the pch_phub register manipulation code. Does this
make sense?
Thanks,
Darren
>>From f83fa6cb575844d8e37f136890fe32258eb88dd2 Mon Sep 17 00:00:00 2001
Message-Id: <f83fa6cb575844d8e37f136890fe32258eb88dd2.1329439822.git.dvhart@...ux.intel.com>
From: Darren Hart <dvhart@...ux.intel.com>
Date: Wed, 15 Feb 2012 15:44:18 -0800
Subject: [PATCH] pch_uart: Add clock parameter
Allow for the specification of the clock as a module parameter. This is useful
when a board uses a non-standard clock, or when different versions of a board
use different clocks, and that board name or the version are not available to
the kernel.
Signed-off-by: Darren Hart <dvhart@...ux.intel.com>
---
drivers/tty/serial/pch_uart.c | 29 +++++++++++++++++------------
1 files changed, 17 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 17ae657..8f192b9 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -203,7 +203,7 @@ enum {
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-#define DEFAULT_BAUD_RATE 1843200 /* 1.8432MHz */
+#define DEFAULT_UART_CLOCK 1843200 /* 1.8432MHz */
struct pch_uart_buffer {
unsigned char *buf;
@@ -218,7 +218,7 @@ struct eg20t_port {
unsigned int iobase;
struct pci_dev *pdev;
int fifo_size;
- int base_baud;
+ int uart_clock;
int start_tx;
int start_rx;
int tx_empty;
@@ -287,13 +287,14 @@ static struct pch_uart_driver_data drv_dat[] = {
static struct eg20t_port *pch_uart_ports[PCH_UART_NR];
#endif
static unsigned int default_baud = 9600;
+static unsigned int clock_param = 0;
static const int trigger_level_256[4] = { 1, 64, 128, 224 };
static const int trigger_level_64[4] = { 1, 16, 32, 56 };
static const int trigger_level_16[4] = { 1, 4, 8, 14 };
static const int trigger_level_1[4] = { 1, 1, 1, 1 };
static void pch_uart_hal_request(struct pci_dev *pdev, int fifosize,
- int base_baud)
+ int uart_clock)
{
struct eg20t_port *priv = pci_get_drvdata(pdev);
@@ -332,7 +333,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
unsigned int dll, dlm, lcr;
int div;
- div = DIV_ROUND_CLOSEST(priv->base_baud / 16, baud);
+ div = DIV_ROUND_CLOSEST(priv->uart_clock / 16, baud);
if (div < 0 || USHRT_MAX <= div) {
dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
return -EINVAL;
@@ -1153,9 +1154,9 @@ static int pch_uart_startup(struct uart_port *port)
priv->tx_empty = 1;
if (port->uartclk)
- priv->base_baud = port->uartclk;
+ priv->uart_clock = port->uartclk;
else
- port->uartclk = priv->base_baud;
+ port->uartclk = priv->uart_clock;
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
ret = pch_uart_hal_set_line(priv, default_baud,
@@ -1507,7 +1508,7 @@ static int __init pch_console_setup(struct console *co, char *options)
return -ENODEV;
/* setup uartclock */
- port->uartclk = DEFAULT_BAUD_RATE;
+ port->uartclk = clock_param ? clock_param : DEFAULT_UART_CLOCK;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1550,7 +1551,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
unsigned int iobase;
unsigned int mapbase;
unsigned char *rxbuf;
- int fifosize, base_baud;
+ int fifosize, uart_clock;
int port_type;
struct pch_uart_driver_data *board;
const char *board_name;
@@ -1566,12 +1567,15 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
if (!rxbuf)
goto init_port_free_txbuf;
- base_baud = DEFAULT_BAUD_RATE;
+ uart_clock = DEFAULT_UART_CLOCK;
/* quirk for CM-iTC board */
board_name = dmi_get_system_info(DMI_BOARD_NAME);
if (board_name && strstr(board_name, "CM-iTC"))
- base_baud = 192000000; /* 192.0MHz */
+ uart_clock = 192000000; /* 192.0MHz */
+
+ /* The module parameter overrides default and system quirks. */
+ uart_clock = clock_param ? clock_param : uart_clock;
switch (port_type) {
case PORT_UNKNOWN:
@@ -1597,7 +1601,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
priv->rxbuf.size = PAGE_SIZE;
priv->fifo_size = fifosize;
- priv->base_baud = base_baud;
+ priv->uart_clock = uart_clock;
priv->port_type = PORT_MAX_8250 + port_type + 1;
priv->port.dev = &pdev->dev;
priv->port.iobase = iobase;
@@ -1614,7 +1618,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
spin_lock_init(&priv->port.lock);
pci_set_drvdata(pdev, priv);
- pch_uart_hal_request(pdev, fifosize, base_baud);
+ pch_uart_hal_request(pdev, fifosize, uart_clock);
#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
pch_uart_ports[board->line_no] = priv;
@@ -1785,3 +1789,4 @@ module_exit(pch_uart_module_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
module_param(default_baud, uint, S_IRUGO);
+module_param(clock_param, uint, S_IRUGO);
--
1.7.6.5
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists