[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGS+omBvULkWsowprvVWkodBxT=diui7g5GtKZ0mb=Uy7DZKtg@mail.gmail.com>
Date: Mon, 20 Feb 2012 19:23:10 +0800
From: Daniel Kurtz <djkurtz@...omium.org>
To: Jean Delvare <khali@...ux-fr.org>
Cc: ben-linux@...ff.org, seth.heasley@...el.com, ben@...adent.org.uk,
David.Woodhouse@...el.com, linux-i2c@...r.kernel.org,
linux-kernel@...r.kernel.org, olofj@...omium.org,
bleung@...omium.org
Subject: Re: [PATCH 0/3 v2] i2c: i801: enable irq
On Fri, Jan 6, 2012 at 7:35 PM, Jean Delvare <khali@...ux-fr.org> wrote:
> Hi Daniel,
>
> On Fri, 6 Jan 2012 18:58:19 +0800, Daniel Kurtz wrote:
>> This is a second version of a set of patches enables the Intel PCH SMBus
>> controller interrupt. It refactors the second two patches a little bit by
>> relying on DEV_ERR interrupt for timeouts, instead of using an explicit
>> wait_event_timeout.
>>
>> The first attempt received absolutely no response. Maybe this time someone
>> will be interested.
>
> I was on vacation. But I am very interested and will review and test
> your patches. There have been several attempts to add IRQ support to
> i2c-i801 in the past but each time there was a blocker issue which
> prevented it from making it into mainline. Hopefully this time we'll
> get it there!
>
>>
>> The SMBus Host Controller Interrupt can signify:
>> INTR - the end of a complete transaction
>> DEV_ERR - that a device did not ACK a transaction
>> BYTE_DONE - the completion of a single byte during a byte-by-byte transaction
>>
>> This patchset arrives with the following caveats:
>>
>> 1) It has only been tested with a Cougar Point (Intel 6 Series PCH) SMBus
>> controller, so the irq is only enabled for that chip type.
>
> I can test on ICH10 easily, and also on ICH7 and ICH3-M if needed.
>
>> 2) It has not been tested with any devices that do transactions that use the
>> PEC. In fact, I believe that an additional small patch would be required
>> to the driver working correctly in interrupt mode with PEC.
>>
>> 3) It has not been tested in SMBus Slave mode.
>>
>> 4) It has not been tested with SMI#-type interrupts.
>>
>> 5) The BIOS has to configure the PCH SMBus IRQ properly.
>>
>> 6) It has not been tested with a device that does byte-by-byte smbus (non-i2c)
>> reads.
>
> I think I can test this.
>
>> 7) It has not been tested with smbus 'process call' transactions.
>
> But not this.
>
>> If would be very helpful if somebody could help test on other chipsets, with
>> a PEC device, or on additional BIOS that woudl be very helpful.
>
> I will do what I can with the hardware I have here.
Jean,
Ping?
>
>> In the meantime, the interrupt behavior is only enabled on the Cougar Point,
>> and even here, it can be completely disabled with the "Interrupt" feature like
>> other advanced features of the driver.
>>
>> Daniel Kurtz (3):
>> i2c: i801: refactor i801_block_transaction_byte_by_byte
>> i2c: i801: enable irq for i801 smbus transactions
>> i2c: i801: enable irq for byte_by_byte transactions
>>
>> drivers/i2c/busses/i2c-i801.c | 199 ++++++++++++++++++++++++++++++++++++-----
>> 1 files changed, 175 insertions(+), 24 deletions(-)
>
> --
> Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists