lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 22 Mar 2012 13:36:07 +0900
From:	"ANEZAKI, Akira" <fireblade1230@...oo.co.jp>
To:	Gwendal Grignou <gwendal@...gle.com>
CC:	IDE/ATA development list <linux-ide@...r.kernel.org>,
	Mark Lord <kernel@...savvy.com>,
	Linux Kernel <linux-kernel@...r.kernel.org>,
	Jeff Garzik <jgarzik@...ox.com>
Subject: Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier
 Sil3726

Hello Gwendal,

(2012/03/21 18:09), Gwendal Grignou wrote:

> - When you do the test between 3.1 and 3.2, do you cold boot the
> machine every time?

Yes, I did. I switched off main switch ( AC power line side. PC,
display, all HDD boxes, etc. ) and wait more than 10 sec.

On the PC that has 6 PMPs with 38 HDDs ( and 2 non PMP HDDs ) :
3.1 -- I can boot every time both of warm reboot and cold boot.
3.2 -- I can't boot at all.
3.2 with my patch -- I can boot every time both of warm reboot and cold
boot.

On the PC that has 2 PMPs with 8 HDDs ( and 2 non PMP HDDs ) :
3.1 -- I can boot smoothly both of warm reboot and cold boot.
3.2 -- I can boot but slowly at the cold boot. Sometimes I cannot boot
at the power cycle but I can't get log until now. And when boot for
power cycle is succeeded, sometimes metadatas for RAIDs are broken.
3.2 with my patch -- I can boot smoothly both of warm reboot and power
cycle.

> - does the problem with 3.2 happens when you just reboot the machine
> instead of cold booting?
About the PC with 6 PMPs, I can't boot at all. But about the PC with 2
PMPs, usually it looks no problems.

> Looking at your log, it seems you are using old drives that take a
> long time to spinup.

Both logs are results of unpatched driver. Pathced or 3.1.x driver boots
smoothly.
The log I sent first is on the PC that has 6 PMPs with 38 HDDs. It can't
boot.
The log I sent second is on the PC that has 2 PMPs with 8 HDDs. Usually
it can boot but takes longer time. 3.1.x or patched driver can boot
smoothly.

> We can see there are progress between 3.2.3 and 3.2.9:
> In 3.2.3, we fail with qc_timeout and some drives are disabled.
> In 3.2.9, we take time to spinup the drives, but finally all are found.

The log I sent first is from 3.2.9 kernel with 6 PMPs and 38 HDDs.
The log I sent second is from 3.2.10 kernel with 2 PMPs and 8 HDDs.
I thought that it may be a sample for usual case so I sent it. I'm sorry
because it made you confused.

> The patch you proposed seems to only have been tested with warm
> reboot, not power cycle.

I test power cycle first. I sent original kernel logs only to explain
the problem. Logs of patched kernel are attached below.
3.2.x kernel sometimes breaks metadata and I have to fix them. I feel it
strange and cannot understand that the kernel sometimes breaks
metadatas/superblocks of RAIDs/file systems those don't include any HDDs
those don't connected to any PMP.
On PC that has 6 PMPs with 38 HDDs, the original 3.2.x kernel usually
breaks metadata and I have to fix the problems before next test. So each
test takes very long time ( a few days ).

> Please see http://www.spinics.net/lists/linux-ide/msg41699.html and
> http://www.spinics.net/lists/linux-ide/msg41700.html for an
> explanation why this patch is need.

Because:
1. kernel 3.1.x and before, the driver works fine.
2. From 3.2.x, booting becomes slow in power cycle.
3. From 3.2.x, the driver sometimes fails to boot. and the driver makes
impossible to boot for some PCs.

The logs below are from a PC that has 2 PMPs with 8 HDDs.

--- 3.2.10 power cycle log ( not patched ) ---
   :
> [    0.000000] Linux version 3.2.10-3.fc16.i686.PAE (mockbuild@...-02.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 15 20:37:01 UTC 2012
   :
> [    2.055030] ata9: SATA max UDMA/100 host m128@...e9ffc00 port 0xfe9f8000 irq 18
   :
> [    4.187038] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [    4.187382] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [    4.189167] ata9.00: hard resetting link
> [    4.527250] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [    4.527288] ata9.01: hard resetting link
> [    4.953017] ata9.01: softreset failed (SRST command error)
> [    5.063019] ata9.01: failed to read SCR 0 (Emask=0x1)
> [    5.063024] ata9.01: reset failed (errno=-85), retrying in 10 secs
> [   14.527034] ata9.01: reset failed, giving up
> [   14.527039] ata9.15: hard resetting link
> [   14.527042] ata9: controller in dubious state, performing PORT_RST
> [   16.681042] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [   16.681425] ata9.00: hard resetting link
> [   17.019250] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [   17.019288] ata9.01: hard resetting link
> [   17.357250] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   17.357288] ata9.02: hard resetting link
> [   17.783013] ata9.02: softreset failed (SRST command error)
> [   17.783032] ata9.02: failed to read SCR 0 (Emask=0x40)
> [   17.783035] ata9.02: reset failed (errno=-85), retrying in 10 secs
> [   27.357085] ata9.02: reset failed, giving up
> [   27.357089] ata9.15: hard resetting link
> [   27.357092] ata9: controller in dubious state, performing PORT_RST
> [   29.511060] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [   29.511428] ata9.00: hard resetting link
> [   29.849253] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [   29.849289] ata9.01: hard resetting link
> [   30.187252] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   30.187287] ata9.02: hard resetting link
> [   30.525253] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   30.525288] ata9.03: hard resetting link
> [   30.951013] ata9.03: softreset failed (SRST command error)
> [   31.061019] ata9.03: failed to read SCR 0 (Emask=0x1)
> [   31.061023] ata9.03: reset failed (errno=-85), retrying in 10 secs
> [   40.525046] ata9.03: reset failed, giving up
> [   40.525050] ata9.15: hard resetting link
> [   40.525053] ata9: controller in dubious state, performing PORT_RST
> [   42.679035] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [   42.679419] ata9.00: hard resetting link
> [   43.017251] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [   43.017289] ata9.01: hard resetting link
> [   43.355251] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   43.355288] ata9.02: hard resetting link
> [   43.693249] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   43.693286] ata9.03: hard resetting link
> [   44.031249] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   44.031286] ata9.04: hard resetting link
> [   44.336389] ata9.04: SATA link down (SStatus 0 SControl 320)
> [   44.336456] ata9.05: hard resetting link
> [   44.641358] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [   44.670114] ata9.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [   44.670119] ata9.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [   44.712074] ata9.00: configured for UDMA/100
> [   44.740733] ata9.01: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [   44.740737] ata9.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [   44.782660] ata9.01: configured for UDMA/100
> [   44.811357] ata9.02: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [   44.811361] ata9.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [   44.853315] ata9.02: configured for UDMA/100
> [   44.882014] ata9.03: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [   44.882019] ata9.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [   44.923982] ata9.03: configured for UDMA/100
> [   44.924061] ata9: EH complete
   :
> [  109.607470] fedora-storage-init[1315]: [  OK  ]
> [  109.781735] lvm[1322]: No volume groups found
   :
> [  124.179756] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [  124.268048] NFSD: starting 90-second grace period
   :

--- 3.2.10 warm reset log ( not patched ) ---
   :
> [    0.000000] Linux version 3.2.10-3.fc16.i686.PAE (mockbuild@...-02.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 15 20:37:01 UTC 2012
   :
> [    2.048967] ata9: SATA max UDMA/100 host m128@...e9ffc00 port 0xfe9f8000 irq 18
   :
> [    4.181039] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [    4.181374] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [    4.184153] ata9.00: hard resetting link
> [    4.522255] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [    4.522292] ata9.01: hard resetting link
> [    4.860255] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    4.860290] ata9.02: hard resetting link
> [    5.198254] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    5.198290] ata9.03: hard resetting link
> [    5.536254] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    5.536289] ata9.04: hard resetting link
> [    5.841392] ata9.04: SATA link down (SStatus 0 SControl 320)
> [    5.841459] ata9.05: hard resetting link
> [    6.146363] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [    6.175178] ata9.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [    6.175183] ata9.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [    6.217150] ata9.00: configured for UDMA/100
> [    6.245808] ata9.01: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [    6.245813] ata9.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [    6.287734] ata9.01: configured for UDMA/100
> [    6.316420] ata9.02: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [    6.316424] ata9.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [    6.358401] ata9.02: configured for UDMA/100
> [    6.387135] ata9.03: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [    6.387140] ata9.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [    6.429104] ata9.03: configured for UDMA/100
> [    6.429184] ata9: EH complete
   :
> [   18.318618] fedora-storage-init[1080]: [  OK  ]
> [   18.509550] lvm[1087]: No volume groups found
   :
> [   27.093615] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [   27.327036] NFSD: starting 90-second grace period
   :
--------

---- 3.2.10 power cycle log ( patched ) ----
   :
> [    0.000000] Linux version 3.2.10-3.aa.fc16.i686.PAE (anezaki@...ver4) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 22 08:14:54 JST 2012
   :
> [    2.064607] ata9: SATA max UDMA/100 host m128@...e9ffc00 port 0xfe9f8000 irq 18
   :
> [    4.196041] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [    4.196368] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [    4.198669] ata9.00: hard resetting link
> [    4.504366] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [    4.504402] ata9.01: hard resetting link
> [    4.809359] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    4.809398] ata9.02: hard resetting link
> [    5.114363] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    5.114399] ata9.03: hard resetting link
> [    5.419359] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    5.419397] ata9.04: hard resetting link
> [    5.724362] ata9.04: SATA link down (SStatus 0 SControl 320)
> [    5.724429] ata9.05: hard resetting link
> [    6.029365] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [    6.059901] ata9.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [    6.059906] ata9.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [    6.101867] ata9.00: configured for UDMA/100
> [    6.211019] ata9.01: failed to IDENTIFY (I/O error, err_mask=0x11)
> [    6.211024] ata9.15: hard resetting link
> [    6.211027] ata9: controller in dubious state, performing PORT_RST
> [    8.365040] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [    8.365383] ata9.00: hard resetting link
> [    8.670359] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [    9.809089] ata9.01: hard resetting link
> [   10.114362] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   10.114400] ata9.02: hard resetting link
> [   10.419408] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   10.419453] ata9.03: hard resetting link
> [   10.724360] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   11.029024] ata9.05: hard resetting link
> [   11.334363] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [   11.405154] ata9.00: configured for UDMA/100
> [   11.515017] ata9.01: failed to IDENTIFY (I/O error, err_mask=0x11)
> [   11.515022] ata9.15: hard resetting link
> [   11.515025] ata9: controller in dubious state, performing PORT_RST
> [   13.669034] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [   13.669416] ata9.00: hard resetting link
> [   13.974361] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [   15.114068] ata9.01: hard resetting link
> [   15.419359] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   15.419397] ata9.02: hard resetting link
> [   15.724362] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   15.724397] ata9.03: hard resetting link
> [   16.029360] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   16.029398] ata9.04: hard resetting link
> [   16.334360] ata9.04: SATA link down (SStatus 0 SControl 320)
> [   16.334427] ata9.05: hard resetting link
> [   16.639364] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [   16.710155] ata9.00: configured for UDMA/100
> [   16.738845] ata9.01: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [   16.738850] ata9.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [   16.780714] ata9.01: configured for UDMA/100
> [   16.809457] ata9.02: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [   16.809462] ata9.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [   16.851386] ata9.02: configured for UDMA/100
> [   16.880135] ata9.03: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [   16.880139] ata9.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [   16.922064] ata9.03: configured for UDMA/100
> [   16.922144] ata9: EH complete
   :
> [   38.783294] fedora-storage-init[1085]: [  OK  ]
> [   38.924664] lvm[1092]: No volume groups found
   :
> [   47.241280] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [   47.331673] NFSD: starting 90-second grace period
   :

--- 3.2.10 warm reboot log ( patched ) ---
   :
> [    0.000000] Linux version 3.2.10-3.aa.fc16.i686.PAE (anezaki@...ver4) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 22 08:14:54 JST 2012
   :
> [    2.053718] ata9: SATA max UDMA/100 host m128@...e9ffc00 port 0xfe9f8000 irq 18
   :
> [    4.185038] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [    4.185391] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [    4.188529] ata9.00: hard resetting link
> [    4.493361] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [    4.493400] ata9.01: hard resetting link
> [    4.798359] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    4.798395] ata9.02: hard resetting link
> [    5.103358] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    5.103396] ata9.03: hard resetting link
> [    5.408359] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    5.408395] ata9.04: hard resetting link
> [    5.713358] ata9.04: SATA link down (SStatus 0 SControl 320)
> [    5.713425] ata9.05: hard resetting link
> [    6.018361] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [    6.048989] ata9.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [    6.048994] ata9.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [    6.091016] ata9.00: configured for UDMA/100
> [    6.119634] ata9.01: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [    6.119638] ata9.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [    6.161506] ata9.01: configured for UDMA/100
> [    6.190229] ata9.02: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [    6.190233] ata9.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [    6.232186] ata9.02: configured for UDMA/100
> [    6.260887] ata9.03: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [    6.260892] ata9.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [    6.302885] ata9.03: configured for UDMA/100
> [    6.302963] ata9: EH complete
   :
> [   17.439980] fedora-storage-init[1099]: [  OK  ]
> [   17.615373] lvm[1106]: No volume groups found
   :
> [   25.864708] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [   26.006311] NFSD: starting 90-second grace period
   :

---------

On the PC that has 6 PMPs and 38HDDs, the situation is terrible. But I
have been fixing the broken RAID metadata and it will take long time.
I'll send it later.

Regards,
Akira
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists