linux-kernel - Re: [PATCH 03/12] ARM: at91/USB host: specify and handle properly vbus_pin_active

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 02 Apr 2012 12:19:57 +0200
From:	Nicolas Ferre <nicolas.ferre@...el.com>
To:	Sergei Shtylyov <sshtylyov@...sta.com>
CC:	linux-arm-kernel@...ts.infradead.org, linux-usb@...r.kernel.org,
	plagnioj@...osoft.com, ludovic.desroches@...el.com,
	linux-kernel@...r.kernel.org, arnd@...db.de, olof@...om.net
Subject: Re: [PATCH 03/12] ARM: at91/USB host: specify and handle properly
 vbus_pin_active_low

On 03/31/2012 11:51 PM, Sergei Shtylyov :
> Hello.
> 
> On 29-03-2012 17:27, Nicolas Ferre wrote:
> 
>> Due to an error while handling vbus_pin_active_low in ohci-at91 driver,
>> the specification of this property was not good in devices/board files.
> 
>> Signed-off-by: Nicolas Ferre<nicolas.ferre@...el.com>
>> Acked-by: Jean-Christophe PLAGNIOL-VILLARD<plagnioj@...osoft.com>
>> Cc: stable<stable@...r.kernel.org>          [3.2+]
>> ---
>>   arch/arm/mach-at91/at91sam9263_devices.c |    3 ++-
>>   arch/arm/mach-at91/at91sam9g45_devices.c |    6 ++++--
>>   arch/arm/mach-at91/board-sam9263ek.c     |    1 +
>>   arch/arm/mach-at91/board-sam9m10g45ek.c  |    1 +
>>   4 files changed, 8 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c
>> b/arch/arm/mach-at91/at91sam9263_devices.c
>> index 53688c4..5cdca89d 100644
>> --- a/arch/arm/mach-at91/at91sam9263_devices.c
>> +++ b/arch/arm/mach-at91/at91sam9263_devices.c
>> @@ -72,7 +72,8 @@ void __init at91_add_device_usbh(struct
>> at91_usbh_data *data)
>>       /* Enable VBus control for UHP ports */
>>       for (i = 0; i<  data->ports; i++) {
>>           if (gpio_is_valid(data->vbus_pin[i]))
>> -            at91_set_gpio_output(data->vbus_pin[i], 0);
>> +            at91_set_gpio_output(data->vbus_pin[i],
>> +                         data->vbus_pin_active_low[i] ^ 0);
> 
>    Note that XOR with 0 is a nop, left operand doesn't change its value.

Sure I will correct that.

Thanks, best regards,
-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/