| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 13 Apr 2012 08:14:54 +0800
From: xiong <xiong@....qualcomm.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <qca-linux-team@...lcomm.com>, <nic-devel@...lcomm.com>,
xiong <xiong@....qualcomm.com>
Subject: [PATCH 29/37] atl1c: update PHY reset related routine
Many magic data are re-configured for PHY during its reset operation
based on chip type to get better compability and stability.
REG_PHY_CTRL register may be configured by BIOS before enter OS.
so, the driver can't directly write to it without any Read-Op.
this change also affect suspend and phy_disable routines.
PHY debug ports and extension registers are refined as well.
Signed-off-by: xiong <xiong@....qualcomm.com>
Tested-by: Liu David <dwliu@....qualcomm.com>
---
drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 188 +++++++------
drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 323 ++++++++++++++++-------
drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 23 +-
3 files changed, 340 insertions(+), 194 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
index 6cbe78a..7172d61 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
@@ -454,6 +454,32 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
return atl1c_write_phy_core(hw, true, dev_addr, reg_addr, phy_data);
}
+int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data)
+{
+ int err;
+
+ err = atl1c_write_phy_reg(hw, MII_DBG_ADDR, reg_addr);
+ if (unlikely(err))
+ return err;
+ else
+ err = atl1c_read_phy_reg(hw, MII_DBG_DATA, phy_data);
+
+ return err;
+}
+
+int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data)
+{
+ int err;
+
+ err = atl1c_write_phy_reg(hw, MII_DBG_ADDR, reg_addr);
+ if (unlikely(err))
+ return err;
+ else
+ err = atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data);
+
+ return err;
+}
+
/*
* Configures PHY autoneg and flow control advertisement settings
*
@@ -496,119 +522,107 @@ static int atl1c_phy_setup_adv(struct atl1c_hw *hw)
void atl1c_phy_disable(struct atl1c_hw *hw)
{
- AT_WRITE_REGW(hw, REG_GPHY_CTRL,
- GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET);
-}
-
-static void atl1c_phy_magic_data(struct atl1c_hw *hw)
-{
- u16 data;
+ u32 phy_ctrl_data;
- data = ANA_LOOP_SEL_10BT | ANA_EN_MASK_TB | ANA_EN_10BT_IDLE |
- ((1 & ANA_INTERVAL_SEL_TIMER_MASK) <<
- ANA_INTERVAL_SEL_TIMER_SHIFT);
-
- atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_18);
- atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-
- data = (2 & ANA_SERDES_CDR_BW_MASK) | ANA_MS_PAD_DBG |
- ANA_SERDES_EN_DEEM | ANA_SERDES_SEL_HSP | ANA_SERDES_EN_PLL |
- ANA_SERDES_EN_LCKDT;
-
- atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_5);
- atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-
- data = (44 & ANA_LONG_CABLE_TH_100_MASK) |
- ((33 & ANA_SHORT_CABLE_TH_100_MASK) <<
- ANA_SHORT_CABLE_TH_100_SHIFT) | ANA_BP_BAD_LINK_ACCUM |
- ANA_BP_SMALL_BW;
-
- atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_54);
- atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-
- data = (11 & ANA_IECHO_ADJ_MASK) | ((11 & ANA_IECHO_ADJ_MASK) <<
- ANA_IECHO_ADJ_2_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) <<
- ANA_IECHO_ADJ_1_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) <<
- ANA_IECHO_ADJ_0_SHIFT);
-
- atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_4);
- atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-
- data = ANA_RESTART_CAL | ((7 & ANA_MANUL_SWICH_ON_MASK) <<
- ANA_MANUL_SWICH_ON_SHIFT) | ANA_MAN_ENABLE |
- ANA_SEL_HSP | ANA_EN_HB | ANA_OEN_125M;
-
- atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_0);
- atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-
- if (hw->ctrl_flags & ATL1C_HIB_DISABLE) {
- atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_41);
- if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0)
- return;
- data &= ~ANA_TOP_PS_EN;
- atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
-
- atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_11);
- if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0)
- return;
- data &= ~ANA_PS_HIB_EN;
- atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
- }
+ AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data);
+ phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_CLS);
+ phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST | GPHY_CTRL_HIB_PULSE |
+ GPHY_CTRL_HIB_EN | GPHY_CTRL_PHY_IDDQ |
+ GPHY_CTRL_PWDOWN_HW;
+ AT_WRITE_REGW(hw, REG_GPHY_CTRL, phy_ctrl_data);
}
+
int atl1c_phy_reset(struct atl1c_hw *hw)
{
struct atl1c_adapter *adapter = hw->adapter;
struct pci_dev *pdev = adapter->pdev;
u16 phy_data;
- u32 phy_ctrl_data = GPHY_CTRL_DEFAULT;
- u32 mii_ier_data = IER_LINK_UP | IER_LINK_DOWN;
+ u32 phy_ctrl_data, lpi_ctrl;
int err;
- if (hw->ctrl_flags & ATL1C_HIB_DISABLE)
- phy_ctrl_data &= ~GPHY_CTRL_HIB_EN;
-
+ /* reset PHY core */
+ AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data);
+ phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_PHY_IDDQ |
+ GPHY_CTRL_GATE_25M_EN | GPHY_CTRL_PWDOWN_HW | GPHY_CTRL_CLS);
+ phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST;
+ if (!(hw->ctrl_flags & ATL1C_HIB_DISABLE))
+ phy_ctrl_data |= (GPHY_CTRL_HIB_EN | GPHY_CTRL_HIB_PULSE);
+ else
+ phy_ctrl_data &= ~(GPHY_CTRL_HIB_EN | GPHY_CTRL_HIB_PULSE);
AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
AT_WRITE_FLUSH(hw);
- msleep(40);
- phy_ctrl_data |= GPHY_CTRL_EXT_RESET;
- AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
+ udelay(10);
+ AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data | GPHY_CTRL_EXT_RESET);
AT_WRITE_FLUSH(hw);
- msleep(10);
+ udelay(10 * GPHY_CTRL_EXT_RST_TO); /* delay 800us */
+ /* switch clock */
if (hw->nic_type == athr_l2c_b) {
- atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x0A);
- atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data);
- atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xDFFF);
+ atl1c_read_phy_dbg(hw, MIIDBG_CFGLPSPD, &phy_data);
+ atl1c_write_phy_dbg(hw, MIIDBG_CFGLPSPD,
+ phy_data & ~CFGLPSPD_RSTCNT_CLK125SW);
}
- if (hw->nic_type == athr_l2c_b ||
- hw->nic_type == athr_l2c_b2 ||
- hw->nic_type == athr_l1d ||
- hw->nic_type == athr_l1d_2) {
- atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x3B);
- atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data);
- atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xFFF7);
- msleep(20);
+ /* tx-half amplitude issue fix */
+ if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) {
+ atl1c_read_phy_dbg(hw, MIIDBG_CABLE1TH_DET, &phy_data);
+ phy_data |= CABLE1TH_DET_EN;
+ atl1c_write_phy_dbg(hw, MIIDBG_CABLE1TH_DET, phy_data);
}
- if (hw->nic_type == athr_l1d) {
- atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29);
- atl1c_write_phy_reg(hw, MII_DBG_DATA, 0x929D);
+
+ /* clear bit3 of dbgport 3B to lower voltage */
+ if (!(hw->ctrl_flags & ATL1C_HIB_DISABLE)) {
+ if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) {
+ atl1c_read_phy_dbg(hw, MIIDBG_VOLT_CTRL, &phy_data);
+ phy_data &= ~VOLT_CTRL_SWLOWEST;
+ atl1c_write_phy_dbg(hw, MIIDBG_VOLT_CTRL, phy_data);
+ }
+ /* power saving config */
+ phy_data =
+ hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2 ?
+ L1D_LEGCYPS_DEF : L1C_LEGCYPS_DEF;
+ atl1c_write_phy_dbg(hw, MIIDBG_LEGCYPS, phy_data);
+ /* hib */
+ atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL,
+ SYSMODCTRL_IECHOADJ_DEF);
+ } else {
+ /* disable pws */
+ atl1c_read_phy_dbg(hw, MIIDBG_LEGCYPS, &phy_data);
+ atl1c_write_phy_dbg(hw, MIIDBG_LEGCYPS,
+ phy_data & ~LEGCYPS_EN);
+ /* disable hibernate */
+ atl1c_read_phy_dbg(hw, MIIDBG_HIBNEG, &phy_data);
+ atl1c_write_phy_dbg(hw, MIIDBG_HIBNEG,
+ phy_data & HIBNEG_PSHIB_EN);
}
- if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b2
- || hw->nic_type == athr_l2c) {
- atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29);
- atl1c_write_phy_reg(hw, MII_DBG_DATA, 0xB6DD);
+ /* disable AZ(EEE) by default */
+ if (hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2 ||
+ hw->nic_type == athr_l2c_b2) {
+ AT_READ_REG(hw, REG_LPI_CTRL, &lpi_ctrl);
+ AT_WRITE_REG(hw, REG_LPI_CTRL, lpi_ctrl & ~LPI_CTRL_EN);
+ atl1c_write_phy_ext(hw, MIIEXT_ANEG, MIIEXT_LOCAL_EEEADV, 0);
+ atl1c_write_phy_ext(hw, MIIEXT_PCS, MIIEXT_CLDCTRL3,
+ L2CB_CLDCTRL3);
}
- err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data);
+
+ /* other debug port to set */
+ atl1c_write_phy_dbg(hw, MIIDBG_ANACTRL, ANACTRL_DEF);
+ atl1c_write_phy_dbg(hw, MIIDBG_SRDSYSMOD, SRDSYSMOD_DEF);
+ atl1c_write_phy_dbg(hw, MIIDBG_TST10BTCFG, TST10BTCFG_DEF);
+ /* UNH-IOL test issue, set bit7 */
+ atl1c_write_phy_dbg(hw, MIIDBG_TST100BTCFG,
+ TST100BTCFG_DEF | TST100BTCFG_LITCH_EN);
+
+ /* set phy interrupt mask */
+ phy_data = IER_LINK_UP | IER_LINK_DOWN;
+ err = atl1c_write_phy_reg(hw, MII_IER, phy_data);
if (err) {
if (netif_msg_hw(adapter))
dev_err(&pdev->dev,
"Error enable PHY linkChange Interrupt\n");
return err;
}
- if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION))
- atl1c_phy_magic_data(hw);
return 0;
}
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
index 672217d..eac90b2 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
@@ -59,6 +59,9 @@ int atl1c_read_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
u16 reg_addr, u16 *phy_data);
int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
u16 reg_addr, u16 phy_data);
+int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data);
+int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data);
+
/* register definition */
#define REG_DEVICE_CAP 0x5C
#define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7
@@ -261,41 +264,32 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
#define IRQ_MODRT_RX_TIMER_SHIFT 16
#define REG_GPHY_CTRL 0x140C
-#define GPHY_CTRL_EXT_RESET 0x1
-#define GPHY_CTRL_RTL_MODE 0x2
-#define GPHY_CTRL_LED_MODE 0x4
-#define GPHY_CTRL_ANEG_NOW 0x8
-#define GPHY_CTRL_REV_ANEG 0x10
-#define GPHY_CTRL_GATE_25M_EN 0x20
-#define GPHY_CTRL_LPW_EXIT 0x40
-#define GPHY_CTRL_PHY_IDDQ 0x80
-#define GPHY_CTRL_PHY_IDDQ_DIS 0x100
-#define GPHY_CTRL_GIGA_DIS 0x200
-#define GPHY_CTRL_HIB_EN 0x400
-#define GPHY_CTRL_HIB_PULSE 0x800
-#define GPHY_CTRL_SEL_ANA_RST 0x1000
-#define GPHY_CTRL_PHY_PLL_ON 0x2000
-#define GPHY_CTRL_PWDOWN_HW 0x4000
-#define GPHY_CTRL_PHY_PLL_BYPASS 0x8000
-
-#define GPHY_CTRL_DEFAULT ( \
- GPHY_CTRL_SEL_ANA_RST |\
- GPHY_CTRL_HIB_PULSE |\
- GPHY_CTRL_HIB_EN)
-
-#define GPHY_CTRL_PW_WOL_DIS ( \
- GPHY_CTRL_SEL_ANA_RST |\
- GPHY_CTRL_HIB_PULSE |\
- GPHY_CTRL_HIB_EN |\
- GPHY_CTRL_PWDOWN_HW |\
- GPHY_CTRL_PHY_IDDQ)
-
-#define GPHY_CTRL_POWER_SAVING ( \
- GPHY_CTRL_SEL_ANA_RST |\
- GPHY_CTRL_HIB_EN |\
- GPHY_CTRL_HIB_PULSE |\
- GPHY_CTRL_PWDOWN_HW |\
- GPHY_CTRL_PHY_IDDQ)
+#define GPHY_CTRL_ADDR_MASK 0x1FUL
+#define GPHY_CTRL_ADDR_SHIFT 19
+#define GPHY_CTRL_BP_VLTGSW BIT(18)
+#define GPHY_CTRL_100AB_EN BIT(17)
+#define GPHY_CTRL_10AB_EN BIT(16)
+#define GPHY_CTRL_PHY_PLL_BYPASS BIT(15)
+#define GPHY_CTRL_PWDOWN_HW BIT(14) /* affect MAC&PHY, to low pw */
+#define GPHY_CTRL_PHY_PLL_ON BIT(13) /* 1:pll always on, 0:can sw */
+#define GPHY_CTRL_SEL_ANA_RST BIT(12)
+#define GPHY_CTRL_HIB_PULSE BIT(11)
+#define GPHY_CTRL_HIB_EN BIT(10)
+#define GPHY_CTRL_GIGA_DIS BIT(9)
+#define GPHY_CTRL_PHY_IDDQ_DIS BIT(8) /* pw on RST */
+#define GPHY_CTRL_PHY_IDDQ BIT(7) /* bit8 affect bit7 while rb */
+#define GPHY_CTRL_LPW_EXIT BIT(6)
+#define GPHY_CTRL_GATE_25M_EN BIT(5)
+#define GPHY_CTRL_REV_ANEG BIT(4)
+#define GPHY_CTRL_ANEG_NOW BIT(3)
+#define GPHY_CTRL_LED_MODE BIT(2)
+#define GPHY_CTRL_RTL_MODE BIT(1)
+#define GPHY_CTRL_EXT_RESET BIT(0) /* 1:out of DSP RST status */
+#define GPHY_CTRL_EXT_RST_TO 80 /* 800us atmost */
+#define GPHY_CTRL_CLS (\
+ GPHY_CTRL_LED_MODE |\
+ GPHY_CTRL_100AB_EN |\
+ GPHY_CTRL_PHY_PLL_ON)
/* Block IDLE Status Register */
#define REG_IDLE_STATUS 0x1410
@@ -389,6 +383,26 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
#define SERDES_LOCK_DETECT_EN BIT(1)
#define SERDES_LOCK_DETECT BIT(0)
+#define REG_LPI_DECISN_TIMER 0x143C
+#define L2CB_LPI_DESISN_TIMER 0x7D00
+
+#define REG_LPI_CTRL 0x1440
+#define LPI_CTRL_CHK_DA BIT(31)
+#define LPI_CTRL_ENH_TO_MASK 0x1FFFUL
+#define LPI_CTRL_ENH_TO_SHIFT 12
+#define LPI_CTRL_ENH_TH_MASK 0x1FUL
+#define LPI_CTRL_ENH_TH_SHIFT 6
+#define LPI_CTRL_ENH_EN BIT(5)
+#define LPI_CTRL_CHK_RX BIT(4)
+#define LPI_CTRL_CHK_STATE BIT(3)
+#define LPI_CTRL_GMII BIT(2)
+#define LPI_CTRL_TO_PHY BIT(1)
+#define LPI_CTRL_EN BIT(0)
+
+#define REG_LPI_WAIT 0x1444
+#define LPI_WAIT_TIMER_MASK 0xFFFFUL
+#define LPI_WAIT_TIMER_SHIFT 0
+
/* MAC Control Register */
#define REG_MAC_CTRL 0x1480
#define MAC_CTRL_TX_EN 0x1
@@ -852,73 +866,188 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
#define MII_DBG_ADDR 0x1D
#define MII_DBG_DATA 0x1E
-#define MII_ANA_CTRL_0 0x0
-#define ANA_RESTART_CAL 0x0001
-#define ANA_MANUL_SWICH_ON_SHIFT 0x1
-#define ANA_MANUL_SWICH_ON_MASK 0xF
-#define ANA_MAN_ENABLE 0x0020
-#define ANA_SEL_HSP 0x0040
-#define ANA_EN_HB 0x0080
-#define ANA_EN_HBIAS 0x0100
-#define ANA_OEN_125M 0x0200
-#define ANA_EN_LCKDT 0x0400
-#define ANA_LCKDT_PHY 0x0800
-#define ANA_AFE_MODE 0x1000
-#define ANA_VCO_SLOW 0x2000
-#define ANA_VCO_FAST 0x4000
-#define ANA_SEL_CLK125M_DSP 0x8000
+/***************************** debug port *************************************/
+
+#define MIIDBG_ANACTRL 0x00
+#define ANACTRL_CLK125M_DELAY_EN 0x8000
+#define ANACTRL_VCO_FAST 0x4000
+#define ANACTRL_VCO_SLOW 0x2000
+#define ANACTRL_AFE_MODE_EN 0x1000
+#define ANACTRL_LCKDET_PHY 0x800
+#define ANACTRL_LCKDET_EN 0x400
+#define ANACTRL_OEN_125M 0x200
+#define ANACTRL_HBIAS_EN 0x100
+#define ANACTRL_HB_EN 0x80
+#define ANACTRL_SEL_HSP 0x40
+#define ANACTRL_CLASSA_EN 0x20
+#define ANACTRL_MANUSWON_SWR_MASK 3U
+#define ANACTRL_MANUSWON_SWR_SHIFT 2
+#define ANACTRL_MANUSWON_SWR_2V 0
+#define ANACTRL_MANUSWON_SWR_1P9V 1
+#define ANACTRL_MANUSWON_SWR_1P8V 2
+#define ANACTRL_MANUSWON_SWR_1P7V 3
+#define ANACTRL_MANUSWON_BW3_4M 0x2
+#define ANACTRL_RESTART_CAL 0x1
+#define ANACTRL_DEF 0x02EF
+
+#define MIIDBG_SYSMODCTRL 0x04
+#define SYSMODCTRL_IECHOADJ_PFMH_PHY 0x8000
+#define SYSMODCTRL_IECHOADJ_BIASGEN 0x4000
+#define SYSMODCTRL_IECHOADJ_PFML_PHY 0x2000
+#define SYSMODCTRL_IECHOADJ_PS_MASK 3U
+#define SYSMODCTRL_IECHOADJ_PS_SHIFT 10
+#define SYSMODCTRL_IECHOADJ_PS_40 3
+#define SYSMODCTRL_IECHOADJ_PS_20 2
+#define SYSMODCTRL_IECHOADJ_PS_0 1
+#define SYSMODCTRL_IECHOADJ_10BT_100MV 0x40 /* 1:100mv, 0:200mv */
+#define SYSMODCTRL_IECHOADJ_HLFAP_MASK 3U
+#define SYSMODCTRL_IECHOADJ_HLFAP_SHIFT 4
+#define SYSMODCTRL_IECHOADJ_VDFULBW 0x8
+#define SYSMODCTRL_IECHOADJ_VDBIASHLF 0x4
+#define SYSMODCTRL_IECHOADJ_VDAMPHLF 0x2
+#define SYSMODCTRL_IECHOADJ_VDLANSW 0x1
+#define SYSMODCTRL_IECHOADJ_DEF 0x88BB /* ???? */
+
+/* for l1d & l2cb */
+#define SYSMODCTRL_IECHOADJ_CUR_ADD 0x8000
+#define SYSMODCTRL_IECHOADJ_CUR_MASK 7U
+#define SYSMODCTRL_IECHOADJ_CUR_SHIFT 12
+#define SYSMODCTRL_IECHOADJ_VOL_MASK 0xFU
+#define SYSMODCTRL_IECHOADJ_VOL_SHIFT 8
+#define SYSMODCTRL_IECHOADJ_VOL_17ALL 3
+#define SYSMODCTRL_IECHOADJ_VOL_100M15 1
+#define SYSMODCTRL_IECHOADJ_VOL_10M17 0
+#define SYSMODCTRL_IECHOADJ_BIAS1_MASK 0xFU
+#define SYSMODCTRL_IECHOADJ_BIAS1_SHIFT 4
+#define SYSMODCTRL_IECHOADJ_BIAS2_MASK 0xFU
+#define SYSMODCTRL_IECHOADJ_BIAS2_SHIFT 0
+#define L1D_SYSMODCTRL_IECHOADJ_DEF 0x4FBB
+
+#define MIIDBG_SRDSYSMOD 0x05
+#define SRDSYSMOD_LCKDET_EN 0x2000
+#define SRDSYSMOD_PLL_EN 0x800
+#define SRDSYSMOD_SEL_HSP 0x400
+#define SRDSYSMOD_HLFTXDR 0x200
+#define SRDSYSMOD_TXCLK_DELAY_EN 0x100
+#define SRDSYSMOD_TXELECIDLE 0x80
+#define SRDSYSMOD_DEEMP_EN 0x40
+#define SRDSYSMOD_MS_PAD 0x4
+#define SRDSYSMOD_CDR_ADC_VLTG 0x2
+#define SRDSYSMOD_CDR_DAC_1MA 0x1
+#define SRDSYSMOD_DEF 0x2C46
+
+#define MIIDBG_CFGLPSPD 0x0A
+#define CFGLPSPD_RSTCNT_MASK 3U
+#define CFGLPSPD_RSTCNT_SHIFT 14
+#define CFGLPSPD_RSTCNT_CLK125SW 0x2000
+
+#define MIIDBG_HIBNEG 0x0B
+#define HIBNEG_PSHIB_EN 0x8000
+#define HIBNEG_WAKE_BOTH 0x4000
+#define HIBNEG_ONOFF_ANACHG_SUDEN 0x2000
+#define HIBNEG_HIB_PULSE 0x1000
+#define HIBNEG_GATE_25M_EN 0x800
+#define HIBNEG_RST_80U 0x400
+#define HIBNEG_RST_TIMER_MASK 3U
+#define HIBNEG_RST_TIMER_SHIFT 8
+#define HIBNEG_GTX_CLK_DELAY_MASK 3U
+#define HIBNEG_GTX_CLK_DELAY_SHIFT 5
+#define HIBNEG_BYPSS_BRKTIMER 0x10
+#define HIBNEG_DEF 0xBC40
+
+#define MIIDBG_TST10BTCFG 0x12
+#define TST10BTCFG_INTV_TIMER_MASK 3U
+#define TST10BTCFG_INTV_TIMER_SHIFT 14
+#define TST10BTCFG_TRIGER_TIMER_MASK 3U
+#define TST10BTCFG_TRIGER_TIMER_SHIFT 12
+#define TST10BTCFG_DIV_MAN_MLT3_EN 0x800
+#define TST10BTCFG_OFF_DAC_IDLE 0x400
+#define TST10BTCFG_LPBK_DEEP 0x4 /* 1:deep,0:shallow */
+#define TST10BTCFG_DEF 0x4C04
+
+#define MIIDBG_AZ_ANADECT 0x15
+#define AZ_ANADECT_10BTRX_TH 0x8000
+#define AZ_ANADECT_BOTH_01CHNL 0x4000
+#define AZ_ANADECT_INTV_MASK 0x3FU
+#define AZ_ANADECT_INTV_SHIFT 8
+#define AZ_ANADECT_THRESH_MASK 0xFU
+#define AZ_ANADECT_THRESH_SHIFT 4
+#define AZ_ANADECT_CHNL_MASK 0xFU
+#define AZ_ANADECT_CHNL_SHIFT 0
+#define AZ_ANADECT_DEF 0x3220
+#define AZ_ANADECT_LONG 0xb210
+
+#define MIIDBG_MSE16DB 0x18 /* l1d */
+#define L1D_MSE16DB_UP 0x05EA
+#define L1D_MSE16DB_DOWN 0x02EA
+
+#define MIIDBG_LEGCYPS 0x29
+#define LEGCYPS_EN 0x8000
+#define LEGCYPS_DAC_AMP1000_MASK 7U
+#define LEGCYPS_DAC_AMP1000_SHIFT 12
+#define LEGCYPS_DAC_AMP100_MASK 7U
+#define LEGCYPS_DAC_AMP100_SHIFT 9
+#define LEGCYPS_DAC_AMP10_MASK 7U
+#define LEGCYPS_DAC_AMP10_SHIFT 6
+#define LEGCYPS_UNPLUG_TIMER_MASK 7U
+#define LEGCYPS_UNPLUG_TIMER_SHIFT 3
+#define LEGCYPS_UNPLUG_DECT_EN 0x4
+#define LEGCYPS_ECNC_PS_EN 0x1
+#define L1D_LEGCYPS_DEF 0x129D
+#define L1C_LEGCYPS_DEF 0x36DD
+
+#define MIIDBG_TST100BTCFG 0x36
+#define TST100BTCFG_NORMAL_BW_EN 0x8000
+#define TST100BTCFG_BADLNK_BYPASS 0x4000
+#define TST100BTCFG_SHORTCABL_TH_MASK 0x3FU
+#define TST100BTCFG_SHORTCABL_TH_SHIFT 8
+#define TST100BTCFG_LITCH_EN 0x80
+#define TST100BTCFG_VLT_SW 0x40
+#define TST100BTCFG_LONGCABL_TH_MASK 0x3FU
+#define TST100BTCFG_LONGCABL_TH_SHIFT 0
+#define TST100BTCFG_DEF 0xE12C
+
+#define MIIDBG_VOLT_CTRL 0x3B /* only for l2cb 1 & 2 */
+#define VOLT_CTRL_CABLE1TH_MASK 0x1FFU
+#define VOLT_CTRL_CABLE1TH_SHIFT 7
+#define VOLT_CTRL_AMPCTRL_MASK 3U
+#define VOLT_CTRL_AMPCTRL_SHIFT 5
+#define VOLT_CTRL_SW_BYPASS 0x10
+#define VOLT_CTRL_SWLOWEST 0x8
+#define VOLT_CTRL_DACAMP10_MASK 7U
+#define VOLT_CTRL_DACAMP10_SHIFT 0
+
+#define MIIDBG_CABLE1TH_DET 0x3E
+#define CABLE1TH_DET_EN 0x8000
+
+
+/******* dev 3 *********/
+#define MIIEXT_PCS 3
-#define MII_ANA_CTRL_4 0x4
-#define ANA_IECHO_ADJ_MASK 0xF
-#define ANA_IECHO_ADJ_3_SHIFT 0
-#define ANA_IECHO_ADJ_2_SHIFT 4
-#define ANA_IECHO_ADJ_1_SHIFT 8
-#define ANA_IECHO_ADJ_0_SHIFT 12
+#define MIIEXT_CLDCTRL3 0x8003
+#define CLDCTRL3_BP_CABLE1TH_DET_GT 0x8000
+#define CLDCTRL3_AZ_DISAMP 0x1000
+#define L2CB_CLDCTRL3 0x4D19
+#define L1D_CLDCTRL3 0xDD19
-#define MII_ANA_CTRL_5 0x5
-#define ANA_SERDES_CDR_BW_SHIFT 0
-#define ANA_SERDES_CDR_BW_MASK 0x3
-#define ANA_MS_PAD_DBG 0x0004
-#define ANA_SPEEDUP_DBG 0x0008
-#define ANA_SERDES_TH_LOS_SHIFT 4
-#define ANA_SERDES_TH_LOS_MASK 0x3
-#define ANA_SERDES_EN_DEEM 0x0040
-#define ANA_SERDES_TXELECIDLE 0x0080
-#define ANA_SERDES_BEACON 0x0100
-#define ANA_SERDES_HALFTXDR 0x0200
-#define ANA_SERDES_SEL_HSP 0x0400
-#define ANA_SERDES_EN_PLL 0x0800
-#define ANA_SERDES_EN 0x1000
-#define ANA_SERDES_EN_LCKDT 0x2000
+#define MIIEXT_CLDCTRL6 0x8006
+#define CLDCTRL6_CAB_LEN_MASK 0x1FFU
+#define CLDCTRL6_CAB_LEN_SHIFT 0
+#define CLDCTRL6_CAB_LEN_SHORT 0x50
-#define MII_ANA_CTRL_11 0xB
-#define ANA_PS_HIB_EN 0x8000
+/********* dev 7 **********/
+#define MIIEXT_ANEG 7
-#define MII_ANA_CTRL_18 0x12
-#define ANA_TEST_MODE_10BT_01SHIFT 0
-#define ANA_TEST_MODE_10BT_01MASK 0x3
-#define ANA_LOOP_SEL_10BT 0x0004
-#define ANA_RGMII_MODE_SW 0x0008
-#define ANA_EN_LONGECABLE 0x0010
-#define ANA_TEST_MODE_10BT_2 0x0020
-#define ANA_EN_10BT_IDLE 0x0400
-#define ANA_EN_MASK_TB 0x0800
-#define ANA_TRIGGER_SEL_TIMER_SHIFT 12
-#define ANA_TRIGGER_SEL_TIMER_MASK 0x3
-#define ANA_INTERVAL_SEL_TIMER_SHIFT 14
-#define ANA_INTERVAL_SEL_TIMER_MASK 0x3
+#define MIIEXT_LOCAL_EEEADV 0x3C
+#define LOCAL_EEEADV_1000BT 0x4
+#define LOCAL_EEEADV_100BT 0x2
-#define MII_ANA_CTRL_41 0x29
-#define ANA_TOP_PS_EN 0x8000
+#define MIIEXT_REMOTE_EEEADV 0x3D
+#define REMOTE_EEEADV_1000BT 0x4
+#define REMOTE_EEEADV_100BT 0x2
-#define MII_ANA_CTRL_54 0x36
-#define ANA_LONG_CABLE_TH_100_SHIFT 0
-#define ANA_LONG_CABLE_TH_100_MASK 0x3F
-#define ANA_DESERVED 0x0040
-#define ANA_EN_LIT_CH 0x0080
-#define ANA_SHORT_CABLE_TH_100_SHIFT 8
-#define ANA_SHORT_CABLE_TH_100_MASK 0x3F
-#define ANA_BP_BAD_LINK_ACCUM 0x4000
-#define ANA_BP_SMALL_BW 0x8000
+#define MIIEXT_EEE_ANEG 0x8000
+#define EEE_ANEG_1000M 0x4
+#define EEE_ANEG_100M 0x2
#endif /*_ATL1C_HW_H_*/
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index e43f42f..9f6416e 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -2313,6 +2313,7 @@ static int atl1c_suspend(struct device *dev)
u32 wol_ctrl_data = 0;
u16 mii_intr_status_data = 0;
u32 wufc = adapter->wol;
+ u32 phy_ctrl_data;
atl1c_disable_l0s_l1(hw);
if (netif_running(netdev)) {
@@ -2327,6 +2328,7 @@ static int atl1c_suspend(struct device *dev)
AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data);
AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl_data);
+ AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data);
master_ctrl_data &= ~MASTER_CTRL_CLK_SEL_DIS;
mac_ctrl_data &= ~(MAC_CTRL_PRMLEN_MASK << MAC_CTRL_PRMLEN_SHIFT);
@@ -2335,9 +2337,13 @@ static int atl1c_suspend(struct device *dev)
MAC_CTRL_PRMLEN_SHIFT);
mac_ctrl_data &= ~(MAC_CTRL_SPEED_MASK << MAC_CTRL_SPEED_SHIFT);
mac_ctrl_data &= ~MAC_CTRL_DUPLX;
+ phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_CLS);
+ phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST | GPHY_CTRL_HIB_PULSE |
+ GPHY_CTRL_HIB_EN;
if (wufc) {
mac_ctrl_data |= MAC_CTRL_RX_EN;
+ phy_ctrl_data |= GPHY_CTRL_EXT_RESET;
if (adapter->link_speed == SPEED_1000 ||
adapter->link_speed == SPEED_0) {
mac_ctrl_data |= atl1c_mac_speed_1000 <<
@@ -2380,23 +2386,20 @@ static int atl1c_suspend(struct device *dev)
dev_dbg(&pdev->dev,
"%s: suspend MAC=0x%x\n",
atl1c_driver_name, mac_ctrl_data);
- AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data);
- AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
- AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
-
- AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT |
- GPHY_CTRL_EXT_RESET);
} else {
- AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_POWER_SAVING);
master_ctrl_data |= MASTER_CTRL_CLK_SEL_DIS;
mac_ctrl_data |= atl1c_mac_speed_10_100 << MAC_CTRL_SPEED_SHIFT;
mac_ctrl_data |= MAC_CTRL_DUPLX;
- AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data);
- AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
- AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
+ phy_ctrl_data |= GPHY_CTRL_PHY_IDDQ | GPHY_CTRL_PWDOWN_HW;
+ wol_ctrl_data = 0;
hw->phy_configured = false; /* re-init PHY when resume */
}
+ AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data);
+ AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
+ AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
+ AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
+
return 0;
}
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists