| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 23 Apr 2012 09:52:54 +0800
From: Aaron Lu <aaron.lu@....com>
To: Lin Ming <ming.m.lin@...el.com>
CC: "Rafael J. Wysocki" <rjw@...k.pl>, lenb <lenb@...nel.org>,
linux-acpi <linux-acpi@...r.kernel.org>,
lkml <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3] ACPI: D3 states cleanup
On Mon, Apr 23, 2012 at 09:03:49AM +0800, Lin Ming wrote:
> There are two ACPI D3 states defined now:
> ACPI_STATE_D3 and ACPI_STATE_D3_COLD.
>
> But the uses of these states are not clear/correct in some code.
> For example, some code refer ACPI_STATE_D3 as D3hot and others refer
> it as D3cold.
>
> This patch introduces ACPI_STATE_D3_HOT to refer to ACPI D3hot state.
> D3hot is only valid if _PR3 present.
> And changes ACPI_STATE_D3 to refer to ACPI D3cold state only.
> Also redefines ACPI_STATE_D3_COLD the same as ACPI_STATE_D3.
>
Reviewed-by: Aaron Lu <aaron.lu@....com>
Thanks,
Aaron
> Acked-by: Rafael J. Wysocki <rjw@...k.pl>
> Signed-off-by: Lin Ming <ming.m.lin@...el.com>
> ---
>
> v3: D3hot is only valid if _PR3 present
>
> drivers/acpi/power.c | 2 +-
> drivers/acpi/scan.c | 17 +++++++----------
> drivers/pci/pci-acpi.c | 4 ++--
> include/acpi/actypes.h | 7 ++++---
> 4 files changed, 14 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
> index 7049a7d..330bb4d 100644
> --- a/drivers/acpi/power.c
> +++ b/drivers/acpi/power.c
> @@ -631,7 +631,7 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state)
> * We know a device's inferred power state when all the resources
> * required for a given D-state are 'on'.
> */
> - for (i = ACPI_STATE_D0; i < ACPI_STATE_D3; i++) {
> + for (i = ACPI_STATE_D0; i < ACPI_STATE_D3_HOT; i++) {
> list = &device->power.states[i].resources;
> if (list->count < 1)
> continue;
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 767e2dc..7417267 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -869,7 +869,7 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
> /*
> * Enumerate supported power management states
> */
> - for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3; i++) {
> + for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
> struct acpi_device_power_state *ps = &device->power.states[i];
> char object_name[5] = { '_', 'P', 'R', '0' + i, '\0' };
>
> @@ -884,21 +884,18 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
> acpi_bus_add_power_resource(ps->resources.handles[j]);
> }
>
> - /* The exist of _PR3 indicates D3Cold support */
> - if (i == ACPI_STATE_D3) {
> - status = acpi_get_handle(device->handle, object_name, &handle);
> - if (ACPI_SUCCESS(status))
> - device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1;
> - }
> -
> /* Evaluate "_PSx" to see if we can do explicit sets */
> object_name[2] = 'S';
> status = acpi_get_handle(device->handle, object_name, &handle);
> if (ACPI_SUCCESS(status))
> ps->flags.explicit_set = 1;
>
> - /* State is valid if we have some power control */
> - if (ps->resources.count || ps->flags.explicit_set)
> + /*
> + * State is valid if there are means to put the device into it.
> + * D3hot is only valid if _PR3 present.
> + */
> + if (ps->resources.count ||
> + (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT))
> ps->flags.valid = 1;
>
> ps->power = -1; /* Unknown - driver assigned */
> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> index 0f150f2..1929c0c 100644
> --- a/drivers/pci/pci-acpi.c
> +++ b/drivers/pci/pci-acpi.c
> @@ -200,7 +200,7 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
> return PCI_D1;
> case ACPI_STATE_D2:
> return PCI_D2;
> - case ACPI_STATE_D3:
> + case ACPI_STATE_D3_HOT:
> return PCI_D3hot;
> case ACPI_STATE_D3_COLD:
> return PCI_D3cold;
> @@ -223,7 +223,7 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
> [PCI_D0] = ACPI_STATE_D0,
> [PCI_D1] = ACPI_STATE_D1,
> [PCI_D2] = ACPI_STATE_D2,
> - [PCI_D3hot] = ACPI_STATE_D3,
> + [PCI_D3hot] = ACPI_STATE_D3_HOT,
> [PCI_D3cold] = ACPI_STATE_D3
> };
> int error = -EINVAL;
> diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
> index eba6604..e8bcc47 100644
> --- a/include/acpi/actypes.h
> +++ b/include/acpi/actypes.h
> @@ -499,9 +499,10 @@ typedef u64 acpi_integer;
> #define ACPI_STATE_D0 (u8) 0
> #define ACPI_STATE_D1 (u8) 1
> #define ACPI_STATE_D2 (u8) 2
> -#define ACPI_STATE_D3 (u8) 3
> -#define ACPI_STATE_D3_COLD (u8) 4
> -#define ACPI_D_STATES_MAX ACPI_STATE_D3_COLD
> +#define ACPI_STATE_D3_HOT (u8) 3
> +#define ACPI_STATE_D3 (u8) 4
> +#define ACPI_STATE_D3_COLD ACPI_STATE_D3
> +#define ACPI_D_STATES_MAX ACPI_STATE_D3
> #define ACPI_D_STATE_COUNT 5
>
> #define ACPI_STATE_C0 (u8) 0
> --
> 1.7.2.5
>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists