[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.15-00013-g9c7edc7 (blackfire@eskarina) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #12 SMP Thu Apr 19 09:45:06 CEST 2012 [ 0.000000] Command line: root=/dev/md11 ro nmi_watchdog=2 panic=10 console=ttyS1,115200n8r console=tty0 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000099000 (usable) [ 0.000000] BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff50000 (usable) [ 0.000000] BIOS-e820: 00000000cff50000 - 00000000cff65000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff65000 - 00000000cff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: Supermicro X7DBR-3/X7DBR-3, BIOS 2.1 06/23/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00D0000000 mask 3FF0000000 uncachable [ 0.000000] 1 base 00E0000000 mask 3FE0000000 uncachable [ 0.000000] 2 base 0000000000 mask 3C00000000 write-back [ 0.000000] 3 base 0400000000 mask 3FE0000000 write-back [ 0.000000] 4 base 0420000000 mask 3FF0000000 write-back [ 0.000000] 5 base 00CFF80000 mask 3FFFF80000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cff80000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff50 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f61b0] f61b0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 8192 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff50000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff50000 page 4k [ 0.000000] kernel direct mapping tables up to cff50000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000430000000 [ 0.000000] 0100000000 - 0430000000 page 2M [ 0.000000] kernel direct mapping tables up to 430000000 @ cff3e000-cff50000 [ 0.000000] ACPI: RSDP 00000000000f6180 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 00000000cff5ea36 00060 (v01 SMCI SMCISLP2 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000cff644fa 00074 (v01 INTEL TUMWATER 06040000 PTL 00000003) [ 0.000000] ACPI: DSDT 00000000cff60568 03F92 (v01 Intel BLAKFORD 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000cff65fc0 00040 [ 0.000000] ACPI: APIC 00000000cff6456e 00090 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: MCFG 00000000cff645fe 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000cff6463a 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SPCR 00000000cff64662 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) [ 0.000000] ACPI: SLIC 00000000cff646b2 00176 (v01 SMCI SMCISLP2 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 00000000cff60309 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000cff60263 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000cff601bd 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000cff60117 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000cff60071 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000cff5ffcb 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000cff5ff25 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000cff5fe7f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 00000000cff5ea96 013E9 (v01 PmRef CpuPm 00003000 INTL 20050228) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000430000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000430000000 [ 0.000000] NODE_DATA [000000042fffb000 - 000000042fffffff] [ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00430000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000099 [ 0.000000] 0: 0x00000100 -> 0x000cff50 [ 0.000000] 0: 0x00100000 -> 0x00430000 [ 0.000000] On node 0 totalpages: 4194009 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 2 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831376 pages, LIFO batch:31 [ 0.000000] Normal zone: 52224 pages used for memmap [ 0.000000] Normal zone: 3290112 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 5, version 32, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88042fc00000 s78208 r8192 d24192 u524288 [ 0.000000] pcpu-alloc: s78208 r8192 d24192 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4125399 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/md11 ro nmi_watchdog=2 panic=10 console=ttyS1,115200n8r console=tty0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 16434604k/17563648k available (5176k kernel code, 787612k absent, 341432k reserved, 5710k data, 860k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1024 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS1] enabled [ 0.000000] allocated 134217728 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2000.145 MHz processor. [ 0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.29 BogoMIPS (lpj=20001450) [ 0.040002] pid_max: default: 32768 minimum: 301 [ 0.046519] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.064088] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.074336] Mount-cache hash table entries: 256 [ 0.080177] Initializing cgroup subsys cpuacct [ 0.084868] Initializing cgroup subsys memory [ 0.090013] Initializing cgroup subsys devices [ 0.094697] Initializing cgroup subsys freezer [ 0.099378] Initializing cgroup subsys net_cls [ 0.100003] Initializing cgroup subsys blkio [ 0.104553] CPU: Physical Processor ID: 0 [ 0.110002] CPU: Processor Core ID: 0 [ 0.113905] mce: CPU supports 6 MCE banks [ 0.120007] CPU0: Thermal monitoring handled by SMI [ 0.120012] using mwait in idle threads. [ 0.124300] Freeing SMP alternatives: 24k freed [ 0.130017] ACPI: Core revision 20110623 [ 0.140012] ftrace: allocating 21131 entries in 83 pages [ 0.160489] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.267273] CPU0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 [ 0.280000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.280000] ... version: 2 [ 0.280001] ... bit width: 40 [ 0.284340] ... generic registers: 2 [ 0.290001] ... value mask: 000000ffffffffff [ 0.295554] ... max period: 000000007fffffff [ 0.300001] ... fixed-purpose events: 3 [ 0.304255] ... event mask: 0000000700000003 [ 0.310239] NMI watchdog enabled, takes one hw-pmu counter. [ 0.316160] Booting Node 0, Processors #1 [ 0.320329] smpboot cpu 1: start_ip = 97000 [ 0.030000] CPU1: Thermal monitoring handled by SMI [ 0.490028] NMI watchdog enabled, takes one hw-pmu counter. [ 0.495968] #2 [ 0.497597] smpboot cpu 2: start_ip = 97000 [ 0.030000] CPU2: Thermal monitoring handled by SMI [ 0.660020] NMI watchdog enabled, takes one hw-pmu counter. [ 0.665913] #3 Ok. [ 0.668256] smpboot cpu 3: start_ip = 97000 [ 0.030000] CPU3: Thermal monitoring handled by SMI [ 0.830020] NMI watchdog enabled, takes one hw-pmu counter. [ 0.835856] Brought up 4 CPUs [ 0.839340] Total of 4 processors activated (16001.02 BogoMIPS). [ 0.851274] xor: automatically using best checksumming function: generic_sse [ 0.910002] generic_sse: 7427.200 MB/sec [ 0.914512] xor: using function: generic_sse (7427.200 MB/sec) [ 0.920044] NET: Registered protocol family 16 [ 0.924773] kworker/u:0 used greatest stack depth: 5504 bytes left [ 0.932235] ACPI: bus type pci registered [ 0.936588] PCI: Using configuration type 1 for base access [ 0.947377] bio: create slab at 0 [ 1.120006] raid6: int64x1 1662 MB/s [ 1.290009] raid6: int64x2 1835 MB/s [ 1.460010] raid6: int64x4 1557 MB/s [ 1.630012] raid6: int64x8 1176 MB/s [ 1.800008] raid6: sse2x1 3119 MB/s [ 1.970013] raid6: sse2x2 5444 MB/s [ 2.140003] raid6: sse2x4 5999 MB/s [ 2.143990] raid6: using algorithm sse2x4 (5999 MB/s) [ 2.149707] ACPI: Added _OSI(Module Device) [ 2.150003] ACPI: Added _OSI(Processor Device) [ 2.154686] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.160002] ACPI: Added _OSI(Processor Aggregator Device) [ 2.170088] ACPI: EC: Look up EC in DSDT [ 2.170347] ACPI Error: [Z000] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 2.179323] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff88041544c7a8), AE_NOT_FOUND (20110623/psparse-536) [ 2.192204] ACPI: Interpreter enabled [ 2.196114] ACPI: (supports S0 S5) [ 2.200847] ACPI: Using IOAPIC for interrupt routing [ 2.211605] ACPI: No dock devices found. [ 2.215772] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.220548] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.228038] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 2.230004] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 2.240003] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 2.250003] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 2.257749] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 2.260002] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] [ 2.270002] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] [ 2.280003] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff] [ 2.287765] pci 0000:00:00.0: [8086:25d8] type 0 class 0x000600 [ 2.287812] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 2.287816] pci 0000:00:00.0: PME# disabled [ 2.287835] pci 0000:00:02.0: [8086:25f7] type 1 class 0x000604 [ 2.287876] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 2.287879] pci 0000:00:02.0: PME# disabled [ 2.287896] pci 0000:00:04.0: [8086:25f8] type 1 class 0x000604 [ 2.290039] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 2.290043] pci 0000:00:04.0: PME# disabled [ 2.290060] pci 0000:00:06.0: [8086:25f9] type 1 class 0x000604 [ 2.290102] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 2.290105] pci 0000:00:06.0: PME# disabled [ 2.290121] pci 0000:00:08.0: [8086:1a38] type 0 class 0x000880 [ 2.290131] pci 0000:00:08.0: reg 10: [mem 0xfe700000-0xfe7003ff 64bit] [ 2.290172] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold [ 2.290175] pci 0000:00:08.0: PME# disabled [ 2.290192] pci 0000:00:10.0: [8086:25f0] type 0 class 0x000600 [ 2.290222] pci 0000:00:10.1: [8086:25f0] type 0 class 0x000600 [ 2.290249] pci 0000:00:10.2: [8086:25f0] type 0 class 0x000600 [ 2.290280] pci 0000:00:11.0: [8086:25f1] type 0 class 0x000600 [ 2.290308] pci 0000:00:13.0: [8086:25f3] type 0 class 0x000600 [ 2.290336] pci 0000:00:15.0: [8086:25f5] type 0 class 0x000600 [ 2.290363] pci 0000:00:16.0: [8086:25f6] type 0 class 0x000600 [ 2.290399] pci 0000:00:1c.0: [8086:2690] type 1 class 0x000604 [ 2.290467] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.290471] pci 0000:00:1c.0: PME# disabled [ 2.290495] pci 0000:00:1d.0: [8086:2688] type 0 class 0x000c03 [ 2.290534] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f] [ 2.290566] pci 0000:00:1d.1: [8086:2689] type 0 class 0x000c03 [ 2.290605] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f] [ 2.290636] pci 0000:00:1d.2: [8086:268a] type 0 class 0x000c03 [ 2.290675] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f] [ 2.290706] pci 0000:00:1d.3: [8086:268b] type 0 class 0x000c03 [ 2.290745] pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f] [ 2.290790] pci 0000:00:1d.7: [8086:268c] type 0 class 0x000c03 [ 2.290809] pci 0000:00:1d.7: reg 10: [mem 0xd8700000-0xd87003ff] [ 2.290888] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 2.290893] pci 0000:00:1d.7: PME# disabled [ 2.290910] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 2.290968] pci 0000:00:1f.0: [8086:2670] type 0 class 0x000601 [ 2.291047] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 2.291064] pci 0000:00:1f.1: [8086:269e] type 0 class 0x000101 [ 2.291077] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 2.291086] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 2.291095] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 2.291104] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 2.291113] pci 0000:00:1f.1: reg 20: [io 0x1880-0x188f] [ 2.291148] pci 0000:00:1f.3: [8086:269b] type 0 class 0x000c05 [ 2.291198] pci 0000:00:1f.3: reg 20: [io 0x1100-0x111f] [ 2.291268] pci 0000:01:00.0: [8086:3500] type 1 class 0x000604 [ 2.291326] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 2.291330] pci 0000:01:00.0: PME# disabled [ 2.291349] pci 0000:01:00.3: [8086:350c] type 1 class 0x000604 [ 2.291405] pci 0000:01:00.3: PME# supported from D0 D3hot D3cold [ 2.291409] pci 0000:01:00.3: PME# disabled [ 2.291423] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.300010] pci 0000:00:02.0: PCI bridge to [bus 01-05] [ 2.305476] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] [ 2.305480] pci 0000:00:02.0: bridge window [mem 0xd8100000-0xd82fffff] [ 2.305521] pci 0000:02:00.0: [8086:3510] type 1 class 0x000604 [ 2.305585] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 2.305589] pci 0000:02:00.0: PME# disabled [ 2.305600] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.310012] pci 0000:02:02.0: [8086:3518] type 1 class 0x000604 [ 2.310076] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold [ 2.310080] pci 0000:02:02.0: PME# disabled [ 2.310091] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.320027] pci 0000:01:00.0: PCI bridge to [bus 02-04] [ 2.330004] pci 0000:01:00.0: bridge window [io 0x2000-0x2fff] [ 2.330008] pci 0000:01:00.0: bridge window [mem 0xd8200000-0xd82fffff] [ 2.330047] pci 0000:02:00.0: PCI bridge to [bus 03-03] [ 2.335566] pci 0000:04:00.0: [8086:1096] type 0 class 0x000200 [ 2.335579] pci 0000:04:00.0: reg 10: [mem 0xd8220000-0xd823ffff] [ 2.335589] pci 0000:04:00.0: reg 14: [mem 0xd8200000-0xd821ffff] [ 2.335600] pci 0000:04:00.0: reg 18: [io 0x2000-0x201f] [ 2.335634] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 2.335678] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 2.335683] pci 0000:04:00.0: PME# disabled [ 2.335710] pci 0000:04:00.1: [8086:1096] type 0 class 0x000200 [ 2.335723] pci 0000:04:00.1: reg 10: [mem 0xd8260000-0xd827ffff] [ 2.335734] pci 0000:04:00.1: reg 14: [mem 0xd8240000-0xd825ffff] [ 2.335744] pci 0000:04:00.1: reg 18: [io 0x2020-0x203f] [ 2.335778] pci 0000:04:00.1: reg 30: [mem 0x00000000-0x0000ffff pref] [ 2.335823] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 2.335827] pci 0000:04:00.1: PME# disabled [ 2.335846] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.340011] pci 0000:02:02.0: PCI bridge to [bus 04-04] [ 2.345476] pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] [ 2.345480] pci 0000:02:02.0: bridge window [mem 0xd8200000-0xd82fffff] [ 2.345552] pci 0000:01:00.3: PCI bridge to [bus 05-05] [ 2.350040] pci 0000:00:04.0: PCI bridge to [bus 06-06] [ 2.355528] pci 0000:00:06.0: PCI bridge to [bus 07-07] [ 2.360056] pci 0000:08:00.0: [8086:032c] type 1 class 0x000604 [ 2.360079] pci 0000:08:00.0: PXH quirk detected; SHPC device MSI disabled [ 2.367469] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 2.367474] pci 0000:08:00.0: PME# disabled [ 2.367497] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.370011] pci 0000:00:1c.0: PCI bridge to [bus 08-09] [ 2.375476] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 2.375480] pci 0000:00:1c.0: bridge window [mem 0xd8300000-0xd83fffff] [ 2.375486] pci 0000:00:1c.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] [ 2.375548] pci 0000:09:02.0: [9005:041f] type 0 class 0x000104 [ 2.375574] pci 0000:09:02.0: reg 10: [mem 0xd8300000-0xd833ffff 64bit] [ 2.375591] pci 0000:09:02.0: reg 18: [mem 0xd8000000-0xd801ffff 64bit pref] [ 2.375603] pci 0000:09:02.0: reg 20: [io 0x3000-0x30ff] [ 2.375624] pci 0000:09:02.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 2.375726] pci 0000:08:00.0: PCI bridge to [bus 09-09] [ 2.380005] pci 0000:08:00.0: bridge window [io 0x3000-0x3fff] [ 2.380010] pci 0000:08:00.0: bridge window [mem 0xd8300000-0xd83fffff] [ 2.380017] pci 0000:08:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] [ 2.380059] pci 0000:0a:01.0: [1002:515e] type 0 class 0x000300 [ 2.380077] pci 0000:0a:01.0: reg 10: [mem 0xd0000000-0xd7ffffff pref] [ 2.380088] pci 0000:0a:01.0: reg 14: [io 0x4000-0x40ff] [ 2.380098] pci 0000:0a:01.0: reg 18: [mem 0xd8400000-0xd840ffff] [ 2.380133] pci 0000:0a:01.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 2.380162] pci 0000:0a:01.0: supports D1 D2 [ 2.380206] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode) [ 2.387494] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff] [ 2.387498] pci 0000:00:1e.0: bridge window [mem 0xd8400000-0xd84fffff] [ 2.387504] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] [ 2.387507] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.387510] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.387513] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.387516] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 2.387519] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 2.387522] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 2.387525] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 2.387528] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode) [ 2.387548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2.387720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 2.387750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0._PRT] [ 2.387787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0._PRT] [ 2.387837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD2._PRT] [ 2.387872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMF3._PRT] [ 2.387918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 2.387967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 2.388022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH0._PRT] [ 2.388091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 2.388140] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 2.403829] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 14 15) [ 2.411279] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) [ 2.419012] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) [ 2.423163] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) [ 2.433174] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 2.443918] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. [ 2.452818] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 2.462169] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. [ 2.470656] vgaarb: device added: PCI:0000:0a:01.0,decodes=io+mem,owns=io+mem,locks=none [ 2.479185] vgaarb: loaded [ 2.480003] vgaarb: bridge control possible 0000:0a:01.0 [ 2.485738] SCSI subsystem initialized [ 2.490140] libata version 3.00 loaded. [ 2.490237] usbcore: registered new interface driver usbfs [ 2.496007] usbcore: registered new interface driver hub [ 2.500063] usbcore: registered new device driver usb [ 2.505579] PCI: Using ACPI for IRQ routing [ 2.510004] PCI: pci_cache_line_size set to 64 bytes [ 2.510108] reserve RAM buffer: 0000000000099000 - 000000000009ffff [ 2.510111] reserve RAM buffer: 00000000cff50000 - 00000000cfffffff [ 2.510463] hpet clockevent registered [ 2.510467] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 2.520005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 2.525371] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 2.560146] Switching to clocksource hpet [ 2.569746] pnp: PnP ACPI init [ 2.573053] ACPI: bus type pnp registered [ 2.577903] pnp 00:00: [bus 00-ff] [ 2.577906] pnp 00:00: [io 0x0000-0x0cf7 window] [ 2.577909] pnp 00:00: [io 0x0cf8-0x0cff] [ 2.577914] pnp 00:00: [io 0x0d00-0xffff window] [ 2.577917] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 2.577919] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 2.577922] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 2.577924] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 2.577926] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 2.577929] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 2.577931] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 2.577933] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 2.577936] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 2.577938] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 2.577940] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 2.577943] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 2.577945] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 2.577948] pnp 00:00: [mem 0xd0000000-0xfebfffff window] [ 2.578042] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 2.578138] pnp 00:01: [io 0x0010-0x001f] [ 2.578141] pnp 00:01: [io 0x0024-0x0025] [ 2.578143] pnp 00:01: [io 0x0028-0x0029] [ 2.578145] pnp 00:01: [io 0x002c-0x002d] [ 2.578147] pnp 00:01: [io 0x002e-0x002f] [ 2.578149] pnp 00:01: [io 0x0030-0x0031] [ 2.578151] pnp 00:01: [io 0x0034-0x0035] [ 2.578153] pnp 00:01: [io 0x0038-0x0039] [ 2.578154] pnp 00:01: [io 0x003c-0x003d] [ 2.578157] pnp 00:01: [io 0x004e-0x004f] [ 2.578159] pnp 00:01: [io 0x0050-0x0053] [ 2.578161] pnp 00:01: [io 0x0063] [ 2.578162] pnp 00:01: [io 0x0065] [ 2.578164] pnp 00:01: [io 0x0067] [ 2.578166] pnp 00:01: [io 0x0072-0x0077] [ 2.578168] pnp 00:01: [io 0x0080] [ 2.578170] pnp 00:01: [io 0x0090-0x009f] [ 2.578172] pnp 00:01: [io 0x00a4-0x00a5] [ 2.578174] pnp 00:01: [io 0x00a8-0x00a9] [ 2.578176] pnp 00:01: [io 0x00ac-0x00ad] [ 2.578178] pnp 00:01: [io 0x00b0-0x00b5] [ 2.578180] pnp 00:01: [io 0x00b8-0x00b9] [ 2.578182] pnp 00:01: [io 0x00bc-0x00bd] [ 2.578185] pnp 00:01: [io 0x04d0-0x04d1] [ 2.578187] pnp 00:01: [io 0x0295-0x0296] [ 2.578189] pnp 00:01: [io 0x0ca2-0x0ca3] [ 2.578190] pnp 00:01: [io 0x0ca8-0x0caf] [ 2.578196] pnp 00:01: [io 0x1000-0x107f] [ 2.578198] pnp 00:01: [io 0x1180-0x11bf] [ 2.578200] pnp 00:01: [io 0x0800-0x080f] [ 2.578202] pnp 00:01: [io 0xfe00] [ 2.578204] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 2.578206] pnp 00:01: [mem 0xfee00000-0xfee0ffff] [ 2.578208] pnp 00:01: [mem 0xfec80000-0xfec80fff] [ 2.578210] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 2.578212] pnp 00:01: [mem 0xfe000000-0xfe01ffff] [ 2.578215] pnp 00:01: [mem 0xfe600000-0xfe6fffff] [ 2.578377] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 2.584539] system 00:01: [io 0x0295-0x0296] has been reserved [ 2.590728] system 00:01: [io 0x0ca2-0x0ca3] has been reserved [ 2.596906] system 00:01: [io 0x0ca8-0x0caf] has been reserved [ 2.603061] system 00:01: [io 0x1000-0x107f] has been reserved [ 2.609247] system 00:01: [io 0x1180-0x11bf] has been reserved [ 2.615781] system 00:01: [io 0x0800-0x080f] has been reserved [ 2.621937] system 00:01: [io 0xfe00] has been reserved [ 2.627517] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 2.634373] system 00:01: [mem 0xfee00000-0xfee0ffff] could not be reserved [ 2.641602] system 00:01: [mem 0xfec80000-0xfec80fff] could not be reserved [ 2.648819] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.655676] system 00:01: [mem 0xfe000000-0xfe01ffff] has been reserved [ 2.662555] system 00:01: [mem 0xfe600000-0xfe6fffff] has been reserved [ 2.669420] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.669432] pnp 00:02: [io 0x0000-0x001f] [ 2.669434] pnp 00:02: [io 0x0081-0x0091] [ 2.669436] pnp 00:02: [io 0x0093-0x009f] [ 2.669438] pnp 00:02: [io 0x00c0-0x00df] [ 2.669441] pnp 00:02: [dma 4] [ 2.669508] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.669519] pnp 00:03: [io 0x00f0-0x00fe] [ 2.669531] pnp 00:03: [irq 13] [ 2.669592] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.669645] pnp 00:04: [io 0x0070-0x0071] [ 2.669707] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.669717] pnp 00:05: [io 0x0061] [ 2.669780] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 2.669910] pnp 00:06: [mem 0xff000000-0xffffffff] [ 2.669974] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active) [ 2.669995] pnp 00:07: [io 0x0060] [ 2.669997] pnp 00:07: [io 0x0064] [ 2.670002] pnp 00:07: [irq 1] [ 2.670068] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 2.670089] pnp 00:08: [irq 12] [ 2.670156] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) [ 2.670329] pnp 00:09: [io 0x03f8-0x03ff] [ 2.670336] pnp 00:09: [irq 4] [ 2.670444] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.670610] pnp 00:0a: [io 0x02f8-0x02ff] [ 2.670616] pnp 00:0a: [irq 3] [ 2.670722] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.670944] pnp 00:0b: [io 0x03f0-0x03f5] [ 2.670946] pnp 00:0b: [io 0x03f7] [ 2.670952] pnp 00:0b: [irq 6] [ 2.670954] pnp 00:0b: [dma 2] [ 2.671043] pnp 00:0b: Plug and Play ACPI device, IDs PNP0700 (active) [ 2.671128] pnp: PnP ACPI: found 12 devices [ 2.675556] ACPI: ACPI bus type pnp unregistered [ 2.688705] PCI: max bus depth: 3 pci_try_num: 4 [ 2.688772] pci 0000:00:02.0: BAR 15: assigned [mem 0xd8500000-0xd85fffff pref] [ 2.696549] pci 0000:01:00.0: BAR 15: assigned [mem 0xd8500000-0xd85fffff pref] [ 2.704293] pci 0000:02:02.0: BAR 15: assigned [mem 0xd8500000-0xd85fffff pref] [ 2.712068] pci 0000:02:00.0: PCI bridge to [bus 03-03] [ 2.717553] pci 0000:04:00.0: BAR 6: assigned [mem 0xd8500000-0xd850ffff pref] [ 2.725216] pci 0000:04:00.1: BAR 6: assigned [mem 0xd8510000-0xd851ffff pref] [ 2.732911] pci 0000:02:02.0: PCI bridge to [bus 04-04] [ 2.738388] pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] [ 2.744718] pci 0000:02:02.0: bridge window [mem 0xd8200000-0xd82fffff] [ 2.751771] pci 0000:02:02.0: bridge window [mem 0xd8500000-0xd85fffff pref] [ 2.759452] pci 0000:01:00.0: PCI bridge to [bus 02-04] [ 2.764920] pci 0000:01:00.0: bridge window [io 0x2000-0x2fff] [ 2.771280] pci 0000:01:00.0: bridge window [mem 0xd8200000-0xd82fffff] [ 2.778325] pci 0000:01:00.0: bridge window [mem 0xd8500000-0xd85fffff pref] [ 2.786005] pci 0000:01:00.3: PCI bridge to [bus 05-05] [ 2.791475] pci 0000:00:02.0: PCI bridge to [bus 01-05] [ 2.796967] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] [ 2.803297] pci 0000:00:02.0: bridge window [mem 0xd8100000-0xd82fffff] [ 2.810348] pci 0000:00:02.0: bridge window [mem 0xd8500000-0xd85fffff pref] [ 2.818028] pci 0000:00:04.0: PCI bridge to [bus 06-06] [ 2.823496] pci 0000:00:06.0: PCI bridge to [bus 07-07] [ 2.828996] pci 0000:09:02.0: BAR 6: assigned [mem 0xd8080000-0xd80fffff pref] [ 2.836668] pci 0000:08:00.0: PCI bridge to [bus 09-09] [ 2.842134] pci 0000:08:00.0: bridge window [io 0x3000-0x3fff] [ 2.848492] pci 0000:08:00.0: bridge window [mem 0xd8300000-0xd83fffff] [ 2.855522] pci 0000:08:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] [ 2.863738] pci 0000:00:1c.0: PCI bridge to [bus 08-09] [ 2.869438] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 2.875784] pci 0000:00:1c.0: bridge window [mem 0xd8300000-0xd83fffff] [ 2.882811] pci 0000:00:1c.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] [ 2.891030] pci 0000:0a:01.0: BAR 6: assigned [mem 0xd8420000-0xd843ffff pref] [ 2.898705] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] [ 2.904169] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff] [ 2.910528] pci 0000:00:1e.0: bridge window [mem 0xd8400000-0xd84fffff] [ 2.917572] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] [ 2.925781] pci 0000:00:02.0: setting latency timer to 64 [ 2.925798] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.932742] pci 0000:01:00.0: setting latency timer to 64 [ 2.932748] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.939717] pci 0000:02:00.0: setting latency timer to 64 [ 2.939728] pci 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.946684] pci 0000:02:02.0: setting latency timer to 64 [ 2.946691] pci 0000:01:00.3: setting latency timer to 64 [ 2.946697] pci 0000:00:04.0: setting latency timer to 64 [ 2.946702] pci 0000:00:06.0: setting latency timer to 64 [ 2.946712] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.953653] pci 0000:00:1c.0: setting latency timer to 64 [ 2.953661] pci 0000:08:00.0: setting latency timer to 64 [ 2.953668] pci 0000:00:1e.0: setting latency timer to 64 [ 2.953672] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.953675] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.953677] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.953680] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 2.953682] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 2.953685] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 2.953687] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff] [ 2.953690] pci_bus 0000:00: resource 11 [mem 0xd0000000-0xfebfffff] [ 2.953692] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 2.953695] pci_bus 0000:01: resource 1 [mem 0xd8100000-0xd82fffff] [ 2.953698] pci_bus 0000:01: resource 2 [mem 0xd8500000-0xd85fffff pref] [ 2.953700] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 2.953703] pci_bus 0000:02: resource 1 [mem 0xd8200000-0xd82fffff] [ 2.953705] pci_bus 0000:02: resource 2 [mem 0xd8500000-0xd85fffff pref] [ 2.953708] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 2.953711] pci_bus 0000:04: resource 1 [mem 0xd8200000-0xd82fffff] [ 2.953713] pci_bus 0000:04: resource 2 [mem 0xd8500000-0xd85fffff pref] [ 2.953716] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff] [ 2.953719] pci_bus 0000:08: resource 1 [mem 0xd8300000-0xd83fffff] [ 2.953721] pci_bus 0000:08: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref] [ 2.953724] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff] [ 2.953727] pci_bus 0000:09: resource 1 [mem 0xd8300000-0xd83fffff] [ 2.953729] pci_bus 0000:09: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref] [ 2.953732] pci_bus 0000:0a: resource 0 [io 0x4000-0x4fff] [ 2.953735] pci_bus 0000:0a: resource 1 [mem 0xd8400000-0xd84fffff] [ 2.953737] pci_bus 0000:0a: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref] [ 2.953740] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7] [ 2.953742] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff] [ 2.953745] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff] [ 2.953747] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff] [ 2.953750] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff] [ 2.953752] pci_bus 0000:0a: resource 9 [mem 0x000dc000-0x000dffff] [ 2.953755] pci_bus 0000:0a: resource 10 [mem 0x000e0000-0x000e3fff] [ 2.953757] pci_bus 0000:0a: resource 11 [mem 0xd0000000-0xfebfffff] [ 2.953803] NET: Registered protocol family 2 [ 2.958893] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 2.968708] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.980712] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.988219] TCP: Hash tables configured (established 524288 bind 65536) [ 2.995069] TCP reno registered [ 2.998503] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 3.004998] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 3.012039] NET: Registered protocol family 1 [ 3.016708] pci 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.023647] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b [ 3.023649] pci 0000:00:1d.0: Performing full reset [ 3.023663] pci 0000:00:1d.0: PCI INT A disabled [ 3.028564] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.035501] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 3.035503] pci 0000:00:1d.1: Performing full reset [ 3.035516] pci 0000:00:1d.1: PCI INT B disabled [ 3.040411] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.047366] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 3.047368] pci 0000:00:1d.2: Performing full reset [ 3.047381] pci 0000:00:1d.2: PCI INT C disabled [ 3.052245] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 3.059213] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 [ 3.059215] pci 0000:00:1d.3: Performing full reset [ 3.059228] pci 0000:00:1d.3: PCI INT D disabled [ 3.064095] pci 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.071087] pci 0000:00:1d.7: PCI INT A disabled [ 3.075974] PCI: CLS mismatch (32 != 64), using 64 bytes [ 3.075989] pci 0000:0a:01.0: Boot video device [ 3.076054] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.082733] Placing 64MB software IO TLB between ffff8800cbf3e000 - ffff8800cff3e000 [ 3.090950] software IO TLB at phys 0xcbf3e000 - 0xcff3e000 [ 3.096779] Simple Boot Flag at 0x38 set to 0x1 [ 3.103387] audit: initializing netlink socket (disabled) [ 3.109064] type=2000 audit(1335705788.100:1): initialized [ 3.202693] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.213536] VFS: Disk quotas dquot_6.5.2 [ 3.217825] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.225722] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 3.236354] SGI XFS Quota Management subsystem [ 3.241048] msgmni has been set to 32098 [ 3.245648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.253539] io scheduler noop registered [ 3.257713] io scheduler deadline registered [ 3.262296] io scheduler cfq registered (default) [ 3.267723] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.273697] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0 [ 3.283299] ACPI: Power Button [PWRB] [ 3.287292] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.301256] ACPI: Power Button [PWRF] [ 3.307661] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.605806] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.905811] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.932904] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.959315] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.965410] Linux agpgart interface v0.103 [ 3.969961] ipmi message handler version 39.2 [ 3.974558] ipmi device interface [ 3.978221] IPMI System Interface driver. [ 3.982555] ipmi_si: probing via SMBIOS [ 3.986658] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 3.992813] ipmi_si: Adding SMBIOS-specified kcs state machine [ 3.998978] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 4.095758] Refined TSC clocksource calibration: 2000.070 MHz. [ 4.101833] Switching to clocksource tsc [ 4.318178] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0028c5, prod_id: 0x0004, dev_id: 0x22) [ 4.327303] ipmi_si ipmi_si.0: IPMI kcs interface initialized [ 4.341340] IPMI Watchdog: driver initialized [ 4.345960] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 4.354998] IPMI poweroff: ATCA Detect mfg 0x28C5 prod 0x4 [ 4.360755] IPMI poweroff: Found a chassis style poweroff function [ 4.367184] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 4.376594] Hangcheck: Using getrawmonotonic(). [ 4.383554] brd: module loaded [ 4.388046] loop: module loaded [ 4.400101] vroot: loaded (max 64 devices) [ 4.404859] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 4.411963] aic94xx 0000:09:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.419303] aic94xx: found Adaptec AIC-9410W SAS/SATA Host Adapter, device 0000:09:02.0 [ 4.427765] scsi0 : aic94xx [ 4.431375] aic94xx: BIOS present (1,1), 1822 [ 4.435997] aic94xx: ue num:4, ue size:88 [ 4.456961] aic94xx: manuf sect SAS_ADDR 50030480002a8a30 [ 4.462598] aic94xx: manuf sect PCBA SN ORG [ 4.467039] aic94xx: ms: num_phy_desc: 8 [ 4.471208] aic94xx: ms: phy0: ENABLED [ 4.475196] aic94xx: ms: phy1: ENABLED [ 4.479208] aic94xx: ms: phy2: ENABLED [ 4.483195] aic94xx: ms: phy3: ENABLED [ 4.487199] aic94xx: ms: phy4: ENABLED [ 4.491193] aic94xx: ms: phy5: ENABLED [ 4.495181] aic94xx: ms: phy6: ENABLED [ 4.499193] aic94xx: ms: phy7: ENABLED [ 4.503188] aic94xx: ms: max_phys:0x8, num_phys:0x8 [ 4.508327] aic94xx: ms: enabled_phys:0xff [ 4.523821] aic94xx: ctrla: phy0: sas_addr: 50030480002a8a30, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 4.534104] aic94xx: ctrla: phy1: sas_addr: 50030480002a8a30, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 4.544381] aic94xx: ctrla: phy2: sas_addr: 50030480002a8a30, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 4.554662] aic94xx: ctrla: phy3: sas_addr: 50030480002a8a30, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 4.564939] aic94xx: ctrla: phy4: sas_addr: 50030480002a8a30, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 4.575218] aic94xx: ctrla: phy5: sas_addr: 50030480002a8a30, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 4.585498] aic94xx: ctrla: phy6: sas_addr: 50030480002a8a30, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 4.595777] aic94xx: ctrla: phy7: sas_addr: 50030480002a8a30, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 4.606067] aic94xx: max_scbs:512, max_ddbs:128 [ 4.610839] aic94xx: setting phy0 addr to 50030480002a8a30 [ 4.616584] aic94xx: setting phy1 addr to 50030480002a8a30 [ 4.622308] aic94xx: setting phy2 addr to 50030480002a8a30 [ 4.628058] aic94xx: setting phy3 addr to 50030480002a8a30 [ 4.633782] aic94xx: setting phy4 addr to 50030480002a8a30 [ 4.639533] aic94xx: setting phy5 addr to 50030480002a8a30 [ 4.645257] aic94xx: setting phy6 addr to 50030480002a8a30 [ 4.651006] aic94xx: setting phy7 addr to 50030480002a8a30 [ 4.656788] aic94xx: num_edbs:21 [ 4.660256] aic94xx: num_escbs:3 [ 4.663751] aic94xx: Found sequencer Firmware version 1.1 (V17/10c6) [ 4.670369] aic94xx: downloading CSEQ... [ 4.674553] aic94xx: dma-ing 8192 bytes [ 4.681496] aic94xx: verified 8192 bytes, passed [ 4.686368] aic94xx: downloading LSEQs... [ 4.690637] aic94xx: dma-ing 14336 bytes [ 4.699798] aic94xx: LSEQ0 verified 14336 bytes, passed [ 4.710043] aic94xx: LSEQ1 verified 14336 bytes, passed [ 4.720287] aic94xx: LSEQ2 verified 14336 bytes, passed [ 4.730534] aic94xx: LSEQ3 verified 14336 bytes, passed [ 4.740775] aic94xx: LSEQ4 verified 14336 bytes, passed [ 4.751020] aic94xx: LSEQ5 verified 14336 bytes, passed [ 4.761266] aic94xx: LSEQ6 verified 14336 bytes, passed [ 4.771507] aic94xx: LSEQ7 verified 14336 bytes, passed [ 4.790126] aic94xx: max_scbs:446 [ 4.793686] aic94xx: first_scb_site_no:0x20 [ 4.798132] aic94xx: last_scb_site_no:0x1fe [ 4.802580] aic94xx: First SCB dma_handle: 0x413de9000 [ 4.808406] aic94xx: device 0000:09:02.0: SAS addr 50030480002a8a30, PCBA SN ORG, 8 phys, 8 enabled phys, flash present, BIOS build 1822 [ 4.821135] aic94xx: posting 3 escbs [ 4.824955] aic94xx: escbs posted [ 4.829080] aic94xx: posting 8 control phy scbs [ 4.833940] aic94xx: control_phy_tasklet_complete: phy0, lrate:0x8, proto:0xe [ 4.841354] aic94xx: control_phy_tasklet_complete: phy1, lrate:0x8, proto:0xe [ 4.848756] aic94xx: control_phy_tasklet_complete: phy2, lrate:0x8, proto:0xe [ 4.856156] aic94xx: control_phy_tasklet_complete: phy3, lrate:0x8, proto:0xe [ 4.863531] aic94xx: control_phy_tasklet_complete: phy4: no device present: oob_status:0x0 [ 4.872266] aic94xx: control_phy_tasklet_complete: phy5: no device present: oob_status:0x0 [ 4.880993] aic94xx: control_phy_tasklet_complete: phy6: no device present: oob_status:0x0 [ 4.889720] aic94xx: control_phy_tasklet_complete: phy7: no device present: oob_status:0x0 [ 4.898441] aic94xx: escb_tasklet_complete: phy2: BYTES_DMAED [ 4.904426] aic94xx: STP proto device-to-host FIS: [ 4.909483] aic94xx: 00: 34 00 50 01 [ 4.913305] aic94xx: 04: 01 00 00 00 [ 4.917119] aic94xx: 08: 00 00 00 00 [ 4.919481] aic94xx: 0c: 01 00 00 00 [ 4.919481] aic94xx: 10: 00 00 00 00 [ 4.928601] aic94xx: asd_form_port: updating phy_mask 0x4 for phy2 [ 4.935030] aic94xx: escb_tasklet_complete: phy3: BYTES_DMAED [ 4.941038] aic94xx: STP proto device-to-host FIS: [ 4.946080] aic94xx: 00: 34 00 50 01 [ 4.949894] aic94xx: 04: 01 00 00 00 [ 4.953708] aic94xx: 08: 00 00 00 00 [ 4.956079] aic94xx: 0c: 01 00 00 00 [ 4.956079] aic94xx: 10: 00 00 00 00 [ 4.965193] aic94xx: asd_form_port: updating phy_mask 0x8 for phy3 [ 4.971634] aic94xx: escb_tasklet_complete: phy1: BYTES_DMAED [ 4.977627] aic94xx: STP proto device-to-host FIS: [ 4.982662] aic94xx: 00: 34 00 50 01 [ 4.986484] aic94xx: 04: 01 00 00 00 [ 4.987626] aic94xx: 08: 00 00 00 00 [ 4.987626] aic94xx: 0c: 01 00 00 00 [ 4.987626] aic94xx: 10: 00 00 00 00 [ 5.001792] aic94xx: asd_form_port: updating phy_mask 0x2 for phy1 [ 5.008233] aic94xx: escb_tasklet_complete: phy0: BYTES_DMAED [ 5.014214] aic94xx: STP proto device-to-host FIS: [ 5.019271] aic94xx: 00: 34 00 50 01 [ 5.023094] aic94xx: 04: 01 00 00 00 [ 5.026907] aic94xx: 08: 00 00 00 00 [ 5.029269] aic94xx: 0c: 01 00 00 00 [ 5.029269] aic94xx: 10: 00 00 00 00 [ 5.038391] aic94xx: asd_form_port: updating phy_mask 0x1 for phy0 [ 5.044863] sas: phy-0:2 added to port-0:0, phy_mask:0x4 (50030480002a8a42) [ 5.044929] sas: phy-0:3 added to port-0:1, phy_mask:0x8 (50030480002a8a43) [ 5.044992] sas: phy-0:1 added to port-0:2, phy_mask:0x2 (50030480002a8a41) [ 5.045056] sas: phy-0:0 added to port-0:3, phy_mask:0x1 (50030480002a8a40) [ 5.045065] sas: DOING DISCOVERY on port 0, pid:24 [ 5.046952] sas: Enter sas_scsi_recover_host [ 5.046957] ata1: sas eh calling libata port error handler [ 5.046967] aic94xx: asd_clear_nexus_I_T: PRE [ 5.051570] aic94xx: asd_clear_nexus_I_T: POST [ 5.056280] aic94xx: asd_clear_nexus_I_T: clear nexus posted, waiting... [ 5.056300] aic94xx: asd_clear_nexus_tasklet_complete: here [ 5.056303] aic94xx: asd_clear_nexus_tasklet_complete: opcode: 0x0 [ 5.075501] aic94xx: sending soft reset to phy-0:2 [ 5.080686] aic94xx: control_phy_tasklet_complete: phy2, lrate:0x8, proto:0xe [ 5.094914] aic94xx: escb_tasklet_complete: phy2: BYTES_DMAED [ 5.100931] aic94xx: STP proto device-to-host FIS: [ 5.105973] aic94xx: 00: 34 00 50 01 [ 5.109794] aic94xx: 04: 01 00 00 00 [ 5.113610] aic94xx: 08: 00 00 00 00 [ 5.115971] aic94xx: 0c: 01 00 00 00 [ 5.115971] aic94xx: 10: 00 00 00 00 [ 5.125092] aic94xx: asd_form_port: updating phy_mask 0x4 for phy2 [ 5.585727] aic94xx: asd_clear_nexus_I_T: PRE [ 5.590326] aic94xx: asd_clear_nexus_I_T: POST [ 5.595015] aic94xx: asd_clear_nexus_I_T: clear nexus posted, waiting... [ 5.595191] aic94xx: asd_clear_nexus_tasklet_complete: here [ 5.595194] aic94xx: asd_clear_nexus_tasklet_complete: opcode: 0x0 [ 5.614231] aic94xx: asd_clear_nexus_I_T: PRE [ 5.618841] aic94xx: asd_clear_nexus_I_T: POST [ 5.623528] aic94xx: asd_clear_nexus_I_T: clear nexus posted, waiting... [ 5.623540] aic94xx: asd_clear_nexus_tasklet_complete: here [ 5.623542] aic94xx: asd_clear_nexus_tasklet_complete: opcode: 0x13 [ 5.642823] sas: sas_ata_hard_reset: Found ATA device. [ 5.645129] ata1.00: native sectors (1) is smaller than sectors (3907029168) [ 5.652456] ata1.00: ATA-8: ST32000644NS, SN11, max UDMA/133 [ 5.658371] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.667357] ata1.00: configured for UDMA/133 [ 5.671872] sas: --- Exit sas_scsi_recover_host [ 5.685807] scsi 0:0:0:0: Direct-Access ATA ST32000644NS SN11 PQ: 0 ANSI: 5 [ 5.694572] sas: DONE DISCOVERY on port 0, pid:24, result:0 [ 5.694582] sas: DOING DISCOVERY on port 1, pid:24 [ 5.696503] sas: Enter sas_scsi_recover_host [ 5.696506] ata1: sas eh calling libata port error handler [ 5.696513] ata2: sas eh calling libata port error handler [ 5.696518] aic94xx: asd_clear_nexus_I_T: PRE [ 5.701119] aic94xx: asd_clear_nexus_I_T: POST [ 5.705831] aic94xx: asd_clear_nexus_I_T: clear nexus posted, waiting... [ 5.705851] aic94xx: asd_clear_nexus_tasklet_complete: here [ 5.705853] aic94xx: asd_clear_nexus_tasklet_complete: opcode: 0x0 [ 5.731164] aic94xx: sending soft reset to phy-0:3 [ 5.736345] aic94xx: control_phy_tasklet_complete: phy3, lrate:0x8, proto:0xe [ 5.750930] aic94xx: escb_tasklet_complete: phy3: BYTES_DMAED [ 5.756934] aic94xx: STP proto device-to-host FIS: [ 5.761968] aic94xx: 00: 34 00 50 01 [ 5.765782] aic94xx: 04: 01 00 00 00 [ 5.766933] aic94xx: 08: 00 00 00 00 [ 5.766933] aic94xx: 0c: 01 00 00 00 [ 5.766933] aic94xx: 10: 00 00 00 00 [ 5.781089] aic94xx: asd_form_port: updating phy_mask 0x8 for phy3 [ 6.245738] aic94xx: asd_clear_nexus_I_T: PRE [ 6.250336] aic94xx: asd_clear_nexus_I_T: POST [ 6.255024] aic94xx: asd_clear_nexus_I_T: clear nexus posted, waiting... [ 6.255200] aic94xx: asd_clear_nexus_tasklet_complete: here [ 6.255203] aic94xx: asd_clear_nexus_tasklet_complete: opcode: 0x0 [ 6.274233] aic94xx: asd_clear_nexus_I_T: PRE [ 6.278843] aic94xx: asd_clear_nexus_I_T: POST [ 6.283528] aic94xx: asd_clear_nexus_I_T: clear nexus posted, waiting... [ 6.283540] aic94xx: asd_clear_nexus_tasklet_complete: here [ 6.283542] aic94xx: asd_clear_nexus_tasklet_complete: opcode: 0x13 [ 6.302822] sas: sas_ata_hard_reset: Found ATA device. [ 6.305145] ata2.00: native sectors (1) is smaller than sectors (3907029168) [ 6.312455] ata2.00: ATA-8: ST32000644NS, SN11, max UDMA/133 [ 6.318362] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.327358] ata2.00: configured for UDMA/133 [ 6.331873] sas: --- Exit sas_scsi_recover_host [ 6.345729] scsi 0:0:1:0: Direct-Access ATA ST32000644NS SN11 PQ: 0 ANSI: 5 [ 6.354793] sas: DONE DISCOVERY on port 1, pid:24, result:0 [ 6.354801] sas: DOING DISCOVERY on port 2, pid:24 [ 6.356463] sas: Enter sas_scsi_recover_host [ 6.356467] ata1: sas eh calling libata port error handler [ 6.356476] ata2: sas eh calling libata port error handler [ 6.356480] ata3: sas eh calling libata port error handler [ 6.356487] aic94xx: asd_clear_nexus_I_T: PRE [ 6.361085] aic94xx: asd_clear_nexus_I_T: POST [ 6.365797] aic94xx: asd_clear_nexus_I_T: clear nexus posted, waiting... [ 6.365817] aic94xx: asd_clear_nexus_tasklet_complete: here [ 6.365819] aic94xx: asd_clear_nexus_tasklet_complete: opcode: 0x0 [ 6.385011] aic94xx: sending soft reset to phy-0:1 [ 6.390133] aic94xx: control_phy_tasklet_complete: phy1, lrate:0x8, proto:0xe [ 6.433282] aic94xx: escb_tasklet_complete: phy1: BYTES_DMAED [ 6.439297] aic94xx: STP proto device-to-host FIS: [ 6.444330] aic94xx: 00: 34 00 50 01 [ 6.448144] aic94xx: 04: 01 00 00 00 [ 6.449295] aic94xx: 08: 00 00 00 00 [ 6.449295] aic94xx: 0c: 01 00 00 00 [ 6.449295] aic94xx: 10: 00 00 00 00 [ 6.463452] aic94xx: asd_form_port: updating phy_mask 0x2 for phy1 [ 6.895798] aic94xx: asd_clear_nexus_I_T: PRE [ 6.900396] aic94xx: asd_clear_nexus_I_T: POST [ 6.905084] aic94xx: asd_clear_nexus_I_T: clear nexus posted, waiting... [ 6.905261] aic94xx: asd_clear_nexus_tasklet_complete: here [ 6.905264] aic94xx: asd_clear_nexus_tasklet_complete: opcode: 0x0 [ 6.924311] aic94xx: asd_clear_nexus_I_T: PRE [ 6.928921] aic94xx: asd_clear_nexus_I_T: POST [ 6.933607] aic94xx: asd_clear_nexus_I_T: clear nexus posted, waiting... [ 6.933618] aic94xx: asd_clear_nexus_tasklet_complete: here [ 6.933620] aic94xx: asd_clear_nexus_tasklet_complete: opcode: 0x13 [ 6.952901] sas: sas_ata_hard_reset: Found ATA device. [ 6.981711] ata3.00: native sectors (1) is smaller than sectors (1953525168) [ 6.989027] ata3.00: ATA-8: ST31000340NS, SN06, max UDMA/133 [ 6.994922] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.044081] ata3.00: configured for UDMA/133 [ 7.048620] sas: --- Exit sas_scsi_recover_host [ 7.065802] scsi 0:0:2:0: Direct-Access ATA ST31000340NS SN06 PQ: 0 ANSI: 5 [ 7.074554] sas: DONE DISCOVERY on port 2, pid:24, result:0 [ 7.074561] sas: DOING DISCOVERY on port 3, pid:24 [ 7.076233] sas: Enter sas_scsi_recover_host [ 7.076236] ata1: sas eh calling libata port error handler [ 7.076242] ata2: sas eh calling libata port error handler [ 7.076247] ata3: sas eh calling libata port error handler [ 7.076251] ata4: sas eh calling libata port error handler [ 7.076256] aic94xx: asd_clear_nexus_I_T: PRE [ 7.080854] aic94xx: asd_clear_nexus_I_T: POST [ 7.085541] aic94xx: asd_clear_nexus_I_T: clear nexus posted, waiting... [ 7.085561] aic94xx: asd_clear_nexus_tasklet_complete: here [ 7.085563] aic94xx: asd_clear_nexus_tasklet_complete: opcode: 0x0 [ 7.104769] aic94xx: sending soft reset to phy-0:0 [ 7.109890] aic94xx: control_phy_tasklet_complete: phy0, lrate:0x8, proto:0xe [ 7.153140] aic94xx: escb_tasklet_complete: phy0: BYTES_DMAED [ 7.159151] aic94xx: STP proto device-to-host FIS: [ 7.164183] aic94xx: 00: 34 00 50 01 [ 7.167997] aic94xx: 04: 01 00 00 00 [ 7.169150] aic94xx: 08: 00 00 00 00 [ 7.169150] aic94xx: 0c: 01 00 00 00 [ 7.169150] aic94xx: 10: 00 00 00 00 [ 7.183314] aic94xx: asd_form_port: updating phy_mask 0x1 for phy0 [ 7.615750] aic94xx: asd_clear_nexus_I_T: PRE [ 7.620347] aic94xx: asd_clear_nexus_I_T: POST [ 7.625035] aic94xx: asd_clear_nexus_I_T: clear nexus posted, waiting... [ 7.625212] aic94xx: asd_clear_nexus_tasklet_complete: here [ 7.625215] aic94xx: asd_clear_nexus_tasklet_complete: opcode: 0x0 [ 7.644259] aic94xx: asd_clear_nexus_I_T: PRE [ 7.648871] aic94xx: asd_clear_nexus_I_T: POST [ 7.653557] aic94xx: asd_clear_nexus_I_T: clear nexus posted, waiting... [ 7.653568] aic94xx: asd_clear_nexus_tasklet_complete: here [ 7.653571] aic94xx: asd_clear_nexus_tasklet_complete: opcode: 0x13 [ 7.672860] sas: sas_ata_hard_reset: Found ATA device. [ 7.701668] ata4.00: native sectors (1) is smaller than sectors (1953525168) [ 7.708985] ata4.00: ATA-8: ST31000340NS, SN06, max UDMA/133 [ 7.714880] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.764070] ata4.00: configured for UDMA/133 [ 7.768614] sas: --- Exit sas_scsi_recover_host [ 7.785872] scsi 0:0:3:0: Direct-Access ATA ST31000340NS SN06 PQ: 0 ANSI: 5 [ 7.794619] sas: DONE DISCOVERY on port 3, pid:24, result:0 [ 7.794623] sas: sas_form_port: phy2 belongs to port0 already(1)! [ 7.794626] sas: sas_form_port: phy3 belongs to port1 already(1)! [ 7.794630] sas: sas_form_port: phy1 belongs to port2 already(1)! [ 7.794633] sas: sas_form_port: phy0 belongs to port3 already(1)! [ 7.794857] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 7.794924] sd 0:0:1:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 7.795001] sd 0:0:1:0: [sdb] Write Protect is off [ 7.795004] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.795055] sd 0:0:2:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 7.795069] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.795124] sd 0:0:2:0: [sdc] Write Protect is off [ 7.795127] sd 0:0:2:0: [sdc] Mode Sense: 00 3a 00 00 [ 7.795170] sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.795257] sd 0:0:3:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 7.795312] sd 0:0:3:0: [sdd] Write Protect is off [ 7.795315] sd 0:0:3:0: [sdd] Mode Sense: 00 3a 00 00 [ 7.795339] sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.807139] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.807213] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 7.807276] sd 0:0:2:0: Attached scsi generic sg2 type 0 [ 7.807337] sd 0:0:3:0: Attached scsi generic sg3 type 0 [ 7.807440] ata_piix 0000:00:1f.1: version 2.13 [ 7.807456] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.807491] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 7.807974] scsi1 : ata_piix [ 7.808097] scsi2 : ata_piix [ 7.808498] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 [ 7.808501] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 [ 7.808681] ata6: port disabled--ignoring [ 7.808793] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 7.808959] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.808963] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 7.808986] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.809013] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 7.809018] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.809049] drivers/usb/core/inode.c: creating file 'devices' [ 7.809052] drivers/usb/core/inode.c: creating file '001' [ 7.809112] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 7.809120] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 [ 7.809124] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 7.809148] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.809155] ehci_hcd 0000:00:1d.7: reset command 0080022 (park)=0 ithresh=8 Async period=1024 Reset HALT [ 7.813026] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 7.813028] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 7.813044] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xd8700000 [ 7.813049] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 7.816941] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 7.966870] sd 0:0:0:0: [sda] Write Protect is off [ 7.971907] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.971939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.981459] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 7.981485] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > [ 7.992192] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 > [ 7.992212] usb usb1: default language 0x0409 [ 7.992219] usb usb1: udev 1, busnum 1, minor = 0 [ 7.992221] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.992224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.992226] usb usb1: Product: EHCI Host Controller [ 7.992228] usb usb1: Manufacturer: Linux 3.2.15-00013-g9c7edc7 ehci_hcd [ 7.992230] usb usb1: SerialNumber: 0000:00:1d.7 [ 7.992315] usb usb1: usb_probe_device [ 7.992318] usb usb1: configuration #1 chosen from 1 choice [ 7.992325] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 7.992384] hub 1-0:1.0: usb_probe_interface [ 7.992386] hub 1-0:1.0: usb_probe_interface - got id [ 7.992388] hub 1-0:1.0: USB hub found [ 7.992393] hub 1-0:1.0: 8 ports detected [ 7.992395] hub 1-0:1.0: standalone hub [ 7.992396] hub 1-0:1.0: no power switching (usb 1.0) [ 7.992398] hub 1-0:1.0: individual port over-current protection [ 7.992400] hub 1-0:1.0: power on to power good time: 20ms [ 7.992404] hub 1-0:1.0: local power source is good [ 7.992407] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 7.992447] drivers/usb/core/inode.c: creating file '001' [ 7.992520] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.992523] ohci_hcd: block sizes: ed 80 td 96 [ 7.992573] uhci_hcd: USB Universal Host Controller Interface driver [ 7.992599] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.992606] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 7.992609] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.992615] drivers/usb/core/inode.c: creating file '002' [ 7.992674] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 7.992681] uhci_hcd 0000:00:1d.0: detected 2 ports [ 7.992686] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 7.992688] uhci_hcd 0000:00:1d.0: Performing full reset [ 7.992703] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 7.992708] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800 [ 7.992745] usb usb2: default language 0x0409 [ 7.992752] usb usb2: udev 1, busnum 2, minor = 128 [ 7.992754] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.992756] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.992758] usb usb2: Product: UHCI Host Controller [ 7.992760] usb usb2: Manufacturer: Linux 3.2.15-00013-g9c7edc7 uhci_hcd [ 7.992762] usb usb2: SerialNumber: 0000:00:1d.0 [ 7.992834] usb usb2: usb_probe_device [ 7.992836] usb usb2: configuration #1 chosen from 1 choice [ 7.992842] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 7.992895] hub 2-0:1.0: usb_probe_interface [ 7.992897] hub 2-0:1.0: usb_probe_interface - got id [ 7.992899] hub 2-0:1.0: USB hub found [ 7.992903] hub 2-0:1.0: 2 ports detected [ 7.992905] hub 2-0:1.0: standalone hub [ 7.992906] hub 2-0:1.0: no power switching (usb 1.0) [ 7.992908] hub 2-0:1.0: individual port over-current protection [ 7.992910] hub 2-0:1.0: power on to power good time: 2ms [ 7.992914] hub 2-0:1.0: local power source is good [ 7.992915] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 7.992931] drivers/usb/core/inode.c: creating file '001' [ 7.992964] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 7.992971] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 7.992974] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.992980] drivers/usb/core/inode.c: creating file '003' [ 7.993043] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 7.993050] uhci_hcd 0000:00:1d.1: detected 2 ports [ 7.993055] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 7.993057] uhci_hcd 0000:00:1d.1: Performing full reset [ 7.993072] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 7.993088] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 7.993120] usb usb3: default language 0x0409 [ 7.993126] usb usb3: udev 1, busnum 3, minor = 256 [ 7.993128] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.993131] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.993133] usb usb3: Product: UHCI Host Controller [ 7.993134] usb usb3: Manufacturer: Linux 3.2.15-00013-g9c7edc7 uhci_hcd [ 7.993136] usb usb3: SerialNumber: 0000:00:1d.1 [ 7.993209] usb usb3: usb_probe_device [ 7.993212] usb usb3: configuration #1 chosen from 1 choice [ 7.993218] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 7.993271] hub 3-0:1.0: usb_probe_interface [ 7.993273] hub 3-0:1.0: usb_probe_interface - got id [ 7.993275] hub 3-0:1.0: USB hub found [ 7.993279] hub 3-0:1.0: 2 ports detected [ 7.993280] hub 3-0:1.0: standalone hub [ 7.993282] hub 3-0:1.0: no power switching (usb 1.0) [ 7.993283] hub 3-0:1.0: individual port over-current protection [ 7.993285] hub 3-0:1.0: power on to power good time: 2ms [ 7.993289] hub 3-0:1.0: local power source is good [ 7.993291] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 7.993306] drivers/usb/core/inode.c: creating file '001' [ 7.993337] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.993345] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 7.993348] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.993355] drivers/usb/core/inode.c: creating file '004' [ 7.993409] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 7.993417] uhci_hcd 0000:00:1d.2: detected 2 ports [ 7.993421] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 7.993423] uhci_hcd 0000:00:1d.2: Performing full reset [ 7.993438] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 7.993444] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 7.993474] usb usb4: default language 0x0409 [ 7.993481] usb usb4: udev 1, busnum 4, minor = 384 [ 7.993483] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.993485] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.993487] usb usb4: Product: UHCI Host Controller [ 7.993489] usb usb4: Manufacturer: Linux 3.2.15-00013-g9c7edc7 uhci_hcd [ 7.993491] usb usb4: SerialNumber: 0000:00:1d.2 [ 7.993564] usb usb4: usb_probe_device [ 7.993566] usb usb4: configuration #1 chosen from 1 choice [ 7.993572] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 7.993626] hub 4-0:1.0: usb_probe_interface [ 7.993628] hub 4-0:1.0: usb_probe_interface - got id [ 7.993630] hub 4-0:1.0: USB hub found [ 7.993640] hub 4-0:1.0: 2 ports detected [ 7.993641] hub 4-0:1.0: standalone hub [ 7.993643] hub 4-0:1.0: no power switching (usb 1.0) [ 7.993644] hub 4-0:1.0: individual port over-current protection [ 7.993646] hub 4-0:1.0: power on to power good time: 2ms [ 7.993650] hub 4-0:1.0: local power source is good [ 7.993652] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 7.993667] drivers/usb/core/inode.c: creating file '001' [ 7.993704] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 7.993710] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 7.993714] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 7.993719] drivers/usb/core/inode.c: creating file '005' [ 7.993779] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 7.993786] uhci_hcd 0000:00:1d.3: detected 2 ports [ 7.993791] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 [ 7.993793] uhci_hcd 0000:00:1d.3: Performing full reset [ 7.993808] uhci_hcd 0000:00:1d.3: supports USB remote wakeup [ 7.993822] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 7.993853] usb usb5: default language 0x0409 [ 7.993859] usb usb5: udev 1, busnum 5, minor = 512 [ 7.993862] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.993864] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.993866] usb usb5: Product: UHCI Host Controller [ 7.993868] usb usb5: Manufacturer: Linux 3.2.15-00013-g9c7edc7 uhci_hcd [ 7.993870] usb usb5: SerialNumber: 0000:00:1d.3 [ 7.993943] usb usb5: usb_probe_device [ 7.993946] usb usb5: configuration #1 chosen from 1 choice [ 7.993952] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 7.994004] hub 5-0:1.0: usb_probe_interface [ 7.994006] hub 5-0:1.0: usb_probe_interface - got id [ 7.994008] hub 5-0:1.0: USB hub found [ 7.994012] hub 5-0:1.0: 2 ports detected [ 7.994013] hub 5-0:1.0: standalone hub [ 7.994015] hub 5-0:1.0: no power switching (usb 1.0) [ 7.994016] hub 5-0:1.0: individual port over-current protection [ 7.994018] hub 5-0:1.0: power on to power good time: 2ms [ 7.994022] hub 5-0:1.0: local power source is good [ 7.994024] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 7.994037] drivers/usb/core/inode.c: creating file '001' [ 7.994106] Initializing USB Mass Storage driver... [ 7.994169] usbcore: registered new interface driver usb-storage [ 7.994170] USB Mass Storage support registered. [ 7.994290] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 8.002793] sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 > [ 8.085697] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001803 0 ACK POWER sig=j CSC CONNECT [ 8.085700] hub 1-0:1.0: port 7: status 0501 change 0001 [ 8.085744] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 [ 8.246030] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.246123] mousedev: PS/2 mouse device common for all mice [ 8.246292] rtc_cmos 00:04: RTC can wake from S4 [ 8.246409] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 8.246439] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 8.246481] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 8.246603] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060) [ 8.246619] iTCO_wdt: cannot register miscdev on minor=130 (err=-16) [ 8.246638] iTCO_wdt: probe of iTCO_wdt failed with error -16 [ 8.246641] iTCO_vendor_support: vendor-support=0 [ 8.246643] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 8.246647] md: linear personality registered for level -1 [ 8.246649] md: raid0 personality registered for level 0 [ 8.246651] md: raid1 personality registered for level 1 [ 8.246653] md: raid10 personality registered for level 10 [ 8.246655] md: raid6 personality registered for level 6 [ 8.246656] md: raid5 personality registered for level 5 [ 8.246658] md: raid4 personality registered for level 4 [ 8.246801] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 8.247017] EDAC MC: Ver: 2.1.0 [ 8.247484] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 [ 8.247570] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) [ 8.248278] AMD64 EDAC driver v3.4.0 [ 8.248396] cpuidle: using governor ladder [ 8.248398] No iBFT detected. [ 8.249040] usbcore: registered new interface driver usbhid [ 8.249041] usbhid: USB HID core driver [ 8.249271] TCP cubic registered [ 8.249273] Initializing XFRM netlink socket [ 8.249557] NET: Registered protocol family 10 [ 8.250006] IPv6 over IPv4 tunneling driver [ 8.250502] NET: Registered protocol family 17 [ 8.250534] Bridge firewalling registered [ 8.250538] 8021q: 802.1Q VLAN Support v1.8 [ 8.250544] Registering the dns_resolver key type [ 8.250573] registered taskstats version 1 [ 8.572114] console [netcon0] enabled [ 8.572334] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.572339] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.572342] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.572345] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000 [ 8.572359] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s [ 8.572508] sd 0:0:3:0: [sdd] Attached SCSI disk [ 8.572827] sd 0:0:1:0: [sdb] Attached SCSI disk [ 8.585882] netconsole: network logging started [ 8.586169] ata5.00: ATAPI: DV-28E-V, 1.AB, max UDMA/33 [ 8.586683] sd 0:0:2:0: [sdc] Attached SCSI disk [ 8.603570] sda: sda1 sda2 < sda5 sda6 sda7 > [ 8.608825] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.626093] ehci_hcd 0000:00:1d.7: port 7 high speed [ 8.626099] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 8.626274] ata5.00: configured for UDMA/33 [ 8.639451] scsi 1:0:0:0: CD-ROM TEAC DV-28E-V 1.AB PQ: 0 ANSI: 5 [ 8.659272] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 8.665692] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 8.671351] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 8.671509] sr 1:0:0:0: Attached scsi generic sg4 type 5 [ 8.677156] md: Waiting for all devices to be available before autodetect [ 8.684181] md: If you don't use raid, use raid=noautodetect [ 8.685786] usb 1-7: new high-speed USB device number 2 using ehci_hcd [ 8.685849] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 8.696894] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 8.697094] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 8.697149] md: Autodetecting RAID arrays. [ 8.756094] ehci_hcd 0000:00:1d.7: port 7 high speed [ 8.756100] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 8.815834] usb 1-7: device descriptor read/64, error -71 [ 8.835149] md: Scanned 16 and added 16 devices. [ 8.840035] md: autorun ... [ 8.843070] md: considering sda7 ... [ 8.846913] md: adding sda7 ... [ 8.850384] md: sda6 has different UUID to sda7 [ 8.855158] md: sda5 has different UUID to sda7 [ 8.859961] md: sda1 has different UUID to sda7 [ 8.864732] md: sdc7 has different UUID to sda7 [ 8.869529] md: sdc6 has different UUID to sda7 [ 8.874302] md: sdc5 has different UUID to sda7 [ 8.879097] md: sdc1 has different UUID to sda7 [ 8.883868] md: sdd7 has different UUID to sda7 [ 8.888665] md: sdd6 has different UUID to sda7 [ 8.893437] md: sdd5 has different UUID to sda7 [ 8.898232] md: sdd1 has different UUID to sda7 [ 8.903008] md: adding sdb7 ... [ 8.906500] md: sdb6 has different UUID to sda7 [ 8.911273] md: sdb5 has different UUID to sda7 [ 8.916068] md: sdb1 has different UUID to sda7 [ 8.921029] md: created md21 [ 8.924153] md: bind [ 8.927138] md: bind [ 8.930101] md: running: [ 8.934271] bio: create slab at 1 [ 8.935972] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 8.938554] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 8.938634] md/raid1:md21: active with 2 out of 2 mirrors [ 8.938717] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 8.944291] md21: detected capacity change from 0 to 1987186393088 [ 8.950786] md: considering sda6 ... [ 8.954610] md: adding sda6 ... [ 8.958129] md: sda5 has different UUID to sda6 [ 8.962900] md: sda1 has different UUID to sda6 [ 8.967696] md: sdc7 has different UUID to sda6 [ 8.972471] md: adding sdc6 ... [ 8.975963] md: sdc5 has different UUID to sda6 [ 8.980737] md: sdc1 has different UUID to sda6 [ 8.985510] md: sdd7 has different UUID to sda6 [ 8.990316] md: adding sdd6 ... [ 8.993791] md: sdd5 has different UUID to sda6 [ 8.998586] md: sdd1 has different UUID to sda6 [ 9.003357] md: adding sdb6 ... [ 9.006094] ehci_hcd 0000:00:1d.7: port 7 high speed [ 9.006098] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 9.006855] md: sdb5 has different UUID to sda6 [ 9.011624] md: sdb1 has different UUID to sda6 [ 9.016592] md: created md11 [ 9.019721] md: bind [ 9.022678] md: bind [ 9.025637] md: bind [ 9.028622] md: bind [ 9.031587] md: running: [ 9.036990] md/raid1:md11: active with 4 out of 4 mirrors [ 9.042646] md11: detected capacity change from 0 to 12584550400 [ 9.048966] md: considering sda5 ... [ 9.052786] md: adding sda5 ... [ 9.056280] md: sda1 has different UUID to sda5 [ 9.061050] md: sdc7 has different UUID to sda5 [ 9.065838] usb 1-7: device descriptor read/64, error -71 [ 9.071489] md: sdc5 has different UUID to sda5 [ 9.076271] md: sdc1 has different UUID to sda5 [ 9.081045] md: sdd7 has different UUID to sda5 [ 9.085843] md: sdd5 has different UUID to sda5 [ 9.090612] md: sdd1 has different UUID to sda5 [ 9.095389] md: adding sdb5 ... [ 9.098892] md: sdb1 has different UUID to sda5 [ 9.103836] md: created md15 [ 9.106978] md: bind [ 9.109932] md: bind [ 9.112890] md: running: [ 9.117135] md/raid1:md15: active with 2 out of 2 mirrors [ 9.122793] md15: detected capacity change from 0 to 518062080 [ 9.128941] md: considering sda1 ... [ 9.132762] md: adding sda1 ... [ 9.136256] md: sdc7 has different UUID to sda1 [ 9.141026] md: sdc5 has different UUID to sda1 [ 9.145823] md: adding sdc1 ... [ 9.149298] md: sdd7 has different UUID to sda1 [ 9.154073] md: sdd5 has different UUID to sda1 [ 9.158875] md: adding sdd1 ... [ 9.162350] md: adding sdb1 ... [ 9.166006] md: created md10 [ 9.169134] md: bind [ 9.172094] md: bind [ 9.175051] md: bind [ 9.178036] md: bind [ 9.181000] md: running: [ 9.186406] md/raid1:md10: active with 4 out of 4 mirrors [ 9.192059] md10: detected capacity change from 0 to 106823680 [ 9.198209] md: considering sdc7 ... [ 9.202026] md: adding sdc7 ... [ 9.205501] md: sdc5 has different UUID to sdc7 [ 9.210310] usb usb2: suspend_rh (auto-stop) [ 9.210329] usb usb3: suspend_rh (auto-stop) [ 9.210348] usb usb4: suspend_rh (auto-stop) [ 9.210366] usb usb5: suspend_rh (auto-stop) [ 9.210382] md: adding sdd7 ... [ 9.213855] md: sdd5 has different UUID to sdc7 [ 9.218829] md: created md22 [ 9.221958] md: bind [ 9.224917] md: bind [ 9.227895] md: running: [ 9.232115] md/raid1:md22: active with 2 out of 2 mirrors [ 9.236095] ehci_hcd 0000:00:1d.7: port 7 high speed [ 9.236099] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 9.237794] md22: detected capacity change from 0 to 986992345088 [ 9.244175] md: considering sdc5 ... [ 9.248015] md: adding sdc5 ... [ 9.251487] md: adding sdd5 ... [ 9.255132] md: created md14 [ 9.258282] md: bind [ 9.267365] md: bind [ 9.270326] md: running: [ 9.274554] md/raid1:md14: active with 2 out of 2 mirrors [ 9.280234] md14: detected capacity change from 0 to 518062080 [ 9.286357] md: ... autorun DONE. [ 9.290384] md11: unknown partition table [ 9.295847] usb 1-7: new high-speed USB device number 3 using ehci_hcd [ 9.302710] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 9.302959] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 9.303208] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 9.322324] kjournald starting. Commit interval 5 seconds [ 9.322343] EXT3-fs (md11): mounted filesystem with writeback data mode [ 9.322352] VFS: Mounted root (ext3 filesystem) readonly on device 9:11. [ 9.343809] Freeing unused kernel memory: 860k freed [ 9.349232] Write protecting the kernel read-only data: 10240k [ 9.355833] ehci_hcd 0000:00:1d.7: port 7 high speed [ 9.355833] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 9.359300] Freeing unused kernel memory: 948k freed [ 9.371612] Freeing unused kernel memory: 1696k freed [ 9.415846] usb 1-7: device descriptor read/64, error -71 [ 9.525973] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 9.526222] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 9.526471] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 9.585968] ehci_hcd 0000:00:1d.7: port 7 high speed [ 9.585974] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 9.645711] usb 1-7: device descriptor read/64, error -71 [ 9.697429] modprobe used greatest stack depth: 4552 bytes left [ 9.815969] ehci_hcd 0000:00:1d.7: port 7 high speed [ 9.815975] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 9.875713] usb 1-7: new high-speed USB device number 4 using ehci_hcd [ 9.882585] ehci_hcd 0000:00:1d.7: devpath 7 ep0out 3strikes [ 10.011807] sed used greatest stack depth: 4328 bytes left [ 10.085850] ehci_hcd 0000:00:1d.7: devpath 7 ep0out 3strikes [ 10.159994] mount used greatest stack depth: 3016 bytes left [ 10.295717] usb 1-7: device not accepting address 4, error -71 [ 10.355850] ehci_hcd 0000:00:1d.7: port 7 high speed [ 10.355850] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 10.402457] udevd (1196): /proc/1196/oom_adj is deprecated, please use /proc/1196/oom_score_adj instead. [ 10.415869] usb 1-7: new high-speed USB device number 5 using ehci_hcd [ 10.422961] ehci_hcd 0000:00:1d.7: devpath 7 ep0out 3strikes [ 10.522048] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 10.528470] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 10.534747] e1000e 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.542006] e1000e 0000:04:00.0: setting latency timer to 64 [ 10.542104] e1000e 0000:04:00.0: (unregistered net_device): CRC Stripping Disabled [ 10.550187] e1000e 0000:04:00.0: irq 64 for MSI/MSI-X [ 10.625978] ehci_hcd 0000:00:1d.7: devpath 7 ep0out 3strikes [ 10.671483] e1000e 0000:04:00.0: eth0: (PCI Express:2.5GT/s:Width x4) 00:30:48:d5:5a:4a [ 10.680012] e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 10.687326] e1000e 0000:04:00.0: eth0: MAC: 5, PHY: 5, PBA No: 2050FF-0FF [ 10.694372] e1000e 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 10.701618] e1000e 0000:04:00.1: setting latency timer to 64 [ 10.701711] e1000e 0000:04:00.1: (unregistered net_device): CRC Stripping Disabled [ 10.709801] e1000e 0000:04:00.1: irq 65 for MSI/MSI-X [ 10.833057] e1000e 0000:04:00.1: eth1: (PCI Express:2.5GT/s:Width x4) 00:30:48:d5:5a:4b [ 10.841539] e1000e 0000:04:00.1: eth1: Intel(R) PRO/1000 Network Connection [ 10.841534] usb 1-7: device not accepting address 5, error -71 [ 10.841552] hub 1-0:1.0: unable to enumerate USB device on port 7 [ 10.861267] e1000e 0000:04:00.1: eth1: MAC: 5, PHY: 5, PBA No: 2050FF-0FF [ 10.875722] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 10.875726] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 [ 10.875734] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 10.875740] hub 1-0:1.0: port 7, status 0100, change 0001, 12 Mb/s [ 10.955744] usb usb5: wakeup_rh (auto-start) [ 11.035733] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x100 [ 11.035739] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 11.035746] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00 [ 11.035753] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 11.195739] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 11.246975] md14: unknown partition table [ 11.251705] Adding 505916k swap on /dev/md14. Priority:-1 extents:1 across:505916k [ 11.260558] md15: unknown partition table [ 11.265233] Adding 505916k swap on /dev/md15. Priority:-2 extents:1 across:505916k [ 11.315747] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 11.382061] EXT3-fs (md11): using internal journal [ 11.475747] usb 5-1: not running at top speed; connect to a high speed hub [ 11.493754] usb 5-1: skipped 1 descriptor after interface [ 11.493758] usb 5-1: skipped 1 descriptor after interface [ 11.499754] usb 5-1: default language 0x0409 [ 11.518755] usb 5-1: udev 2, busnum 5, minor = 513 [ 11.518758] usb 5-1: New USB device found, idVendor=14dd, idProduct=0002 [ 11.525847] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.533344] usb 5-1: Product: Multidevice [ 11.537745] usb 5-1: Manufacturer: Peppercon AG [ 11.542639] usb 5-1: SerialNumber: 0083c601aa48d2d18A62C7F7C61EBFAA [ 11.549368] usb 5-1: usb_probe_device [ 11.549372] usb 5-1: configuration #1 chosen from 1 choice [ 11.555768] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 11.555803] usb-storage 5-1:1.0: usb_probe_interface [ 11.555809] usb-storage 5-1:1.0: usb_probe_interface - got id [ 11.555881] scsi3 : usb-storage 5-1:1.0 [ 11.560160] usb 5-1: adding 5-1:1.1 (config #1, interface 1) [ 11.560186] usb-storage 5-1:1.1: usb_probe_interface [ 11.560191] usb-storage 5-1:1.1: usb_probe_interface - got id [ 11.560238] scsi4 : usb-storage 5-1:1.1 [ 11.564492] usb 5-1: adding 5-1:1.2 (config #1, interface 2) [ 11.564519] usbhid 5-1:1.2: usb_probe_interface [ 11.564522] usbhid 5-1:1.2: usb_probe_interface - got id [ 11.570826] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.2/input/input2 [ 11.581512] generic-usb 0003:14DD:0002.0001: input,hidraw0: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:1d.3-1/input2 [ 11.594387] usb 5-1: adding 5-1:1.3 (config #1, interface 3) [ 11.594429] usbhid 5-1:1.3: usb_probe_interface [ 11.594432] usbhid 5-1:1.3: usb_probe_interface - got id [ 11.598988] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.3/input/input3 [ 11.609609] uhci_hcd 0000:00:1d.3: reserve dev 2 ep86-INT, period 8, phase 4, 61 us [ 11.609650] generic-usb 0003:14DD:0002.0002: input,hidraw1: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:1d.3-1/input3 [ 11.622772] drivers/usb/core/inode.c: creating file '002' [ 12.507160] md10: unknown partition table [ 12.561783] scsi 4:0:0:0: CD-ROM PepperC Virtual Disc 2 0.01 PQ: 0 ANSI: 3 [ 12.570451] scsi 3:0:0:0: CD-ROM PepperC Virtual Disc 1 0.01 PQ: 0 ANSI: 3 [ 12.583441] md21: unknown partition table [ 12.602759] sr1: scsi-1 drive [ 12.606124] sr 4:0:0:0: Attached scsi CD-ROM sr1 [ 12.606173] sr 4:0:0:0: Attached scsi generic sg5 type 5 [ 12.611793] sr2: scsi-1 drive [ 12.613775] md22: unknown partition table [ 12.619467] sr 3:0:0:0: Attached scsi CD-ROM sr2 [ 12.619507] sr 3:0:0:0: Attached scsi generic sg6 type 5 [ 13.752186] XFS (dm-10): Mounting Filesystem [ 13.917507] XFS (dm-10): Ending clean mount [ 14.259235] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.284931] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 15.226378] ipt_account 0.1.21 : Piotr Gasidlo , http://www.barbara.eu.org/~quaker/ipt_account/ [ 15.976085] e1000e 0000:04:00.1: irq 65 for MSI/MSI-X [ 16.035944] e1000e 0000:04:00.1: irq 65 for MSI/MSI-X [ 16.038345] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 16.044110] 8021q: adding VLAN 0 to HW filter on device eth1 [ 16.096130] e1000e 0000:04:00.0: irq 64 for MSI/MSI-X [ 16.155995] e1000e 0000:04:00.0: irq 64 for MSI/MSI-X [ 16.158395] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.163953] 8021q: adding VLAN 0 to HW filter on device eth0 [ 16.271222] ADDRCONF(NETDEV_UP): eth0.20: link is not ready [ 19.118371] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 19.128988] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.137277] ADDRCONF(NETDEV_CHANGE): eth0.20: link becomes ready [ 29.156156] eth0: no IPv6 routers present [ 29.916167] eth0.20: no IPv6 routers present * attached an ISO image (visible as one of two virtual CD-ROM drives) * [ 95.688794] usb 5-1: uhci_result_common: failed with status 440000 [ 95.688813] uhci_hcd 0000:00:1d.3: release dev 2 ep86-INT, period 8, phase 4, 61 us [ 95.705096] hub 1-0:1.0: state 7 ports 8 chg 0000 evt ff80 [ 95.705112] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001803 0 ACK POWER sig=j CSC CONNECT [ 95.705124] hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s [ 95.707183] uhci_hcd 0000:00:1d.3: reserve dev 2 ep86-INT, period 8, phase 4, 61 us [ 95.728790] usb 5-1: uhci_result_common: failed with status 440000 [ 95.728799] uhci_hcd 0000:00:1d.3: release dev 2 ep86-INT, period 8, phase 4, 61 us [ 95.757188] uhci_hcd 0000:00:1d.3: reserve dev 2 ep86-INT, period 8, phase 4, 61 us [ 95.776778] usb 5-1: uhci_result_common: failed with status 440000 [ 95.776794] uhci_hcd 0000:00:1d.3: release dev 2 ep86-INT, period 8, phase 4, 61 us [ 95.827239] uhci_hcd 0000:00:1d.3: reserve dev 2 ep86-INT, period 8, phase 4, 61 us [ 95.848791] usb 5-1: uhci_result_common: failed with status 440000 [ 95.848800] uhci_hcd 0000:00:1d.3: release dev 2 ep86-INT, period 8, phase 4, 61 us [ 95.857227] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501 [ 95.917385] ehci_hcd 0000:00:1d.7: port 7 high speed [ 95.917390] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 95.957181] uhci_hcd 0000:00:1d.3: reserve dev 2 ep86-INT, period 8, phase 4, 61 us [ 95.976776] usb 5-1: uhci_result_common: failed with status 440000 [ 95.976786] uhci_hcd 0000:00:1d.3: release dev 2 ep86-INT, period 8, phase 4, 61 us [ 95.977196] usb 1-7: new high-speed USB device number 6 using ehci_hcd [ 95.984252] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 95.984500] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 95.984749] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 96.037508] ehci_hcd 0000:00:1d.7: port 7 high speed [ 96.037514] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 96.077241] uhci_hcd 0000:00:1d.3: reserve dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.096775] usb 5-1: uhci_result_common: failed with status 440000 [ 96.096783] uhci_hcd 0000:00:1d.3: release dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.097198] usb 1-7: device descriptor read/64, error -71 [ 96.197103] uhci_hcd 0000:00:1d.3: reserve dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.207262] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 96.207512] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 96.207762] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 96.216776] usb 5-1: uhci_result_common: failed with status 440000 [ 96.216785] uhci_hcd 0000:00:1d.3: release dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.267384] ehci_hcd 0000:00:1d.7: port 7 high speed [ 96.267389] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 96.317196] uhci_hcd 0000:00:1d.3: reserve dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.327203] usb 1-7: device descriptor read/64, error -71 [ 96.336775] usb 5-1: uhci_result_common: failed with status 440000 [ 96.336782] uhci_hcd 0000:00:1d.3: release dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.437189] uhci_hcd 0000:00:1d.3: reserve dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.456775] usb 5-1: uhci_result_common: failed with status 440000 [ 96.456783] uhci_hcd 0000:00:1d.3: release dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.497385] ehci_hcd 0000:00:1d.7: port 7 high speed [ 96.497390] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 96.557193] usb 1-7: new high-speed USB device number 7 using ehci_hcd [ 96.557199] uhci_hcd 0000:00:1d.3: reserve dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.564000] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 96.564249] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 96.564500] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 96.576775] usb 5-1: uhci_result_common: failed with status 440000 [ 96.576785] uhci_hcd 0000:00:1d.3: release dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.617385] ehci_hcd 0000:00:1d.7: port 7 high speed [ 96.617390] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 96.677191] uhci_hcd 0000:00:1d.3: reserve dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.677204] usb 1-7: device descriptor read/64, error -71 [ 96.696775] usb 5-1: uhci_result_common: failed with status 440000 [ 96.696783] uhci_hcd 0000:00:1d.3: release dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.787263] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 96.787513] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 96.787762] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 96.797195] uhci_hcd 0000:00:1d.3: reserve dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.816775] usb 5-1: uhci_result_common: failed with status 440000 [ 96.816784] uhci_hcd 0000:00:1d.3: release dev 2 ep86-INT, period 8, phase 4, 61 us [ 96.847509] ehci_hcd 0000:00:1d.7: port 7 high speed [ 96.847515] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 96.907208] usb 1-7: device descriptor read/64, error -71 [ 97.077229] hub 5-0:1.0: logical disconnect on port 1 [ 97.137384] ehci_hcd 0000:00:1d.7: port 7 high speed [ 97.137390] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 97.197205] usb 1-7: new high-speed USB device number 8 using ehci_hcd [ 97.204126] ehci_hcd 0000:00:1d.7: devpath 7 ep0out 3strikes [ 97.407264] ehci_hcd 0000:00:1d.7: devpath 7 ep0out 3strikes [ 97.617205] usb 1-7: device not accepting address 8, error -71 [ 97.677510] ehci_hcd 0000:00:1d.7: port 7 high speed [ 97.677515] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 97.737212] usb 1-7: new high-speed USB device number 9 using ehci_hcd [ 97.744125] ehci_hcd 0000:00:1d.7: devpath 7 ep0out 3strikes [ 97.947264] ehci_hcd 0000:00:1d.7: devpath 7 ep0out 3strikes [ 98.157212] usb 1-7: device not accepting address 9, error -71 [ 98.163297] hub 1-0:1.0: unable to enumerate USB device on port 7 [ 98.187222] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0002 [ 98.187229] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00 [ 98.187236] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 98.187239] usb 5-1: USB disconnect, device number 2 [ 98.192446] usb 5-1: unregistering device [ 98.192449] usb 5-1: unregistering interface 5-1:1.0 [ 98.192970] usb 5-1: unregistering interface 5-1:1.1 [ 98.193313] usb 5-1: unregistering interface 5-1:1.2 [ 98.267316] usb 5-1: unregistering interface 5-1:1.3 [ 98.377310] usb 5-1: usb_disable_device nuking all URBs [ 98.537227] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 98.657225] usb 5-1: new full-speed USB device number 3 using uhci_hcd [ 98.816786] usb 5-1: not running at top speed; connect to a high speed hub [ 98.834796] usb 5-1: skipped 1 descriptor after interface [ 98.834800] usb 5-1: skipped 1 descriptor after interface [ 98.840798] usb 5-1: default language 0x0409 [ 98.859800] usb 5-1: udev 3, busnum 5, minor = 514 [ 98.859803] usb 5-1: New USB device found, idVendor=14dd, idProduct=0002 [ 98.866751] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 98.874161] usb 5-1: Product: Multidevice [ 98.878424] usb 5-1: Manufacturer: Peppercon AG [ 98.883195] usb 5-1: SerialNumber: 0083c601aa48d2d18A62C7F7C61EBFAA [ 98.889778] usb 5-1: usb_probe_device [ 98.889782] usb 5-1: configuration #1 chosen from 1 choice [ 98.893796] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 98.893831] usb-storage 5-1:1.0: usb_probe_interface [ 98.893837] usb-storage 5-1:1.0: usb_probe_interface - got id [ 98.893900] scsi5 : usb-storage 5-1:1.0 [ 98.898069] usb 5-1: adding 5-1:1.1 (config #1, interface 1) [ 98.898096] usb-storage 5-1:1.1: usb_probe_interface [ 98.898101] usb-storage 5-1:1.1: usb_probe_interface - got id [ 98.900814] scsi6 : usb-storage 5-1:1.1 [ 98.904964] usb 5-1: adding 5-1:1.2 (config #1, interface 2) [ 98.904991] usbhid 5-1:1.2: usb_probe_interface [ 98.904993] usbhid 5-1:1.2: usb_probe_interface - got id [ 98.910854] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.2/input/input4 [ 98.921296] generic-usb 0003:14DD:0002.0003: input,hidraw0: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:1d.3-1/input2 [ 98.933939] usb 5-1: adding 5-1:1.3 (config #1, interface 3) [ 98.933971] usbhid 5-1:1.3: usb_probe_interface [ 98.933973] usbhid 5-1:1.3: usb_probe_interface - got id [ 98.939053] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.3/input/input5 [ 98.949471] uhci_hcd 0000:00:1d.3: reserve dev 3 ep86-INT, period 8, phase 4, 61 us [ 98.949516] generic-usb 0003:14DD:0002.0004: input,hidraw1: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:1d.3-1/input3 [ 98.962426] drivers/usb/core/inode.c: creating file '003' [ 98.962447] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 [ 98.962459] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 98.962469] hub 1-0:1.0: port 7, status 0100, change 0001, 12 Mb/s [ 99.117252] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x100 [ 99.117257] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 99.901838] scsi 5:0:0:0: CD-ROM PepperC Virtual Disc 1 0.01 PQ: 0 ANSI: 3 [ 99.901845] scsi 6:0:0:0: CD-ROM PepperC Virtual Disc 2 0.01 PQ: 0 ANSI: 3 [ 99.932802] sr2: scsi-1 drive [ 99.936139] sr 5:0:0:0: Attached scsi CD-ROM sr2 [ 99.936187] sr 5:0:0:0: Attached scsi generic sg5 type 5 [ 99.937814] sr1: scsi-1 drive [ 99.937911] sr 6:0:0:0: Attached scsi CD-ROM sr1 [ 99.945066] sr 6:0:0:0: Attached scsi generic sg6 type 5 * detached the CD-ROM drive * [ 126.072800] usb 5-1: uhci_result_common: failed with status 440000 [ 126.072814] uhci_hcd 0000:00:1d.3: release dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.087589] uhci_hcd 0000:00:1d.3: reserve dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.096462] hub 1-0:1.0: state 7 ports 8 chg 0000 evt ff80 [ 126.096475] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001803 0 ACK POWER sig=j CSC CONNECT [ 126.096485] hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s [ 126.104795] usb 5-1: uhci_result_common: failed with status 440000 [ 126.104806] uhci_hcd 0000:00:1d.3: release dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.127680] uhci_hcd 0000:00:1d.3: reserve dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.144794] usb 5-1: uhci_result_common: failed with status 440000 [ 126.144805] uhci_hcd 0000:00:1d.3: release dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.197728] uhci_hcd 0000:00:1d.3: reserve dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.216790] usb 5-1: uhci_result_common: failed with status 440000 [ 126.216798] uhci_hcd 0000:00:1d.3: release dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.247683] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501 [ 126.307899] ehci_hcd 0000:00:1d.7: port 7 high speed [ 126.307904] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 126.317589] uhci_hcd 0000:00:1d.3: reserve dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.336791] usb 5-1: uhci_result_common: failed with status 440000 [ 126.336800] uhci_hcd 0000:00:1d.3: release dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.367687] usb 1-7: new high-speed USB device number 10 using ehci_hcd [ 126.374640] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 126.374890] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 126.375138] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 126.427897] ehci_hcd 0000:00:1d.7: port 7 high speed [ 126.427903] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 126.437684] uhci_hcd 0000:00:1d.3: reserve dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.456790] usb 5-1: uhci_result_common: failed with status 440000 [ 126.456798] uhci_hcd 0000:00:1d.3: release dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.487678] usb 1-7: device descriptor read/64, error -71 [ 126.557685] uhci_hcd 0000:00:1d.3: reserve dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.576790] usb 5-1: uhci_result_common: failed with status 440000 [ 126.576799] uhci_hcd 0000:00:1d.3: release dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.597776] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 126.598027] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 126.598276] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 126.657899] ehci_hcd 0000:00:1d.7: port 7 high speed [ 126.657904] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 126.677595] uhci_hcd 0000:00:1d.3: reserve dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.696790] usb 5-1: uhci_result_common: failed with status 440000 [ 126.696798] uhci_hcd 0000:00:1d.3: release dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.717682] usb 1-7: device descriptor read/64, error -71 [ 126.797596] uhci_hcd 0000:00:1d.3: reserve dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.816790] usb 5-1: uhci_result_common: failed with status 440000 [ 126.816798] uhci_hcd 0000:00:1d.3: release dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.887898] ehci_hcd 0000:00:1d.7: port 7 high speed [ 126.887903] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 126.917739] uhci_hcd 0000:00:1d.3: reserve dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.936791] usb 5-1: uhci_result_common: failed with status 440000 [ 126.936801] uhci_hcd 0000:00:1d.3: release dev 3 ep86-INT, period 8, phase 4, 61 us [ 126.947684] usb 1-7: new high-speed USB device number 11 using ehci_hcd [ 126.954638] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 126.954889] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 126.955138] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 127.007898] ehci_hcd 0000:00:1d.7: port 7 high speed [ 127.007904] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 127.037692] uhci_hcd 0000:00:1d.3: reserve dev 3 ep86-INT, period 8, phase 4, 61 us [ 127.056790] usb 5-1: uhci_result_common: failed with status 440000 [ 127.056798] uhci_hcd 0000:00:1d.3: release dev 3 ep86-INT, period 8, phase 4, 61 us [ 127.067697] usb 1-7: device descriptor read/64, error -71 [ 127.157693] uhci_hcd 0000:00:1d.3: reserve dev 3 ep86-INT, period 8, phase 4, 61 us [ 127.176791] usb 5-1: uhci_result_common: failed with status 440000 [ 127.176802] uhci_hcd 0000:00:1d.3: release dev 3 ep86-INT, period 8, phase 4, 61 us [ 127.177777] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 127.178027] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 127.178276] ehci_hcd 0000:00:1d.7: devpath 7 ep0in 3strikes [ 127.237898] ehci_hcd 0000:00:1d.7: port 7 high speed [ 127.237904] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 127.297700] usb 1-7: device descriptor read/64, error -71 [ 127.467899] ehci_hcd 0000:00:1d.7: port 7 high speed [ 127.467904] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 127.527705] usb 1-7: new high-speed USB device number 12 using ehci_hcd [ 127.534639] ehci_hcd 0000:00:1d.7: devpath 7 ep0out 3strikes [ 127.737778] ehci_hcd 0000:00:1d.7: devpath 7 ep0out 3strikes [ 127.947705] usb 1-7: device not accepting address 12, error -71 [ 128.007790] hub 5-0:1.0: logical disconnect on port 1 [ 128.067898] ehci_hcd 0000:00:1d.7: port 7 high speed [ 128.067903] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 128.127713] usb 1-7: new high-speed USB device number 13 using ehci_hcd [ 128.134640] ehci_hcd 0000:00:1d.7: devpath 7 ep0out 3strikes [ 128.337778] ehci_hcd 0000:00:1d.7: devpath 7 ep0out 3strikes [ 128.547707] usb 1-7: device not accepting address 13, error -71 [ 128.553880] hub 1-0:1.0: unable to enumerate USB device on port 7 [ 128.577712] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0002 [ 128.577720] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00 [ 128.577729] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 128.577732] usb 5-1: USB disconnect, device number 3 [ 128.582947] usb 5-1: unregistering device [ 128.582950] usb 5-1: unregistering interface 5-1:1.0 [ 128.583460] usb 5-1: unregistering interface 5-1:1.1 [ 128.583774] usb 5-1: unregistering interface 5-1:1.2 [ 128.657820] usb 5-1: unregistering interface 5-1:1.3 [ 128.767811] usb 5-1: usb_disable_device nuking all URBs [ 128.927728] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 129.047729] usb 5-1: new full-speed USB device number 4 using uhci_hcd [ 129.206803] usb 5-1: not running at top speed; connect to a high speed hub [ 129.224809] usb 5-1: skipped 1 descriptor after interface [ 129.224813] usb 5-1: skipped 1 descriptor after interface [ 129.230812] usb 5-1: default language 0x0409 [ 129.249815] usb 5-1: udev 4, busnum 5, minor = 515 [ 129.249818] usb 5-1: New USB device found, idVendor=14dd, idProduct=0002 [ 129.256762] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 129.264174] usb 5-1: Product: Multidevice [ 129.268434] usb 5-1: Manufacturer: Peppercon AG [ 129.273213] usb 5-1: SerialNumber: 0083c601aa48d2d18A62C7F7C61EBFAA [ 129.279799] usb 5-1: usb_probe_device [ 129.279802] usb 5-1: configuration #1 chosen from 1 choice [ 129.289818] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 129.289854] usb-storage 5-1:1.0: usb_probe_interface [ 129.289859] usb-storage 5-1:1.0: usb_probe_interface - got id [ 129.290179] scsi7 : usb-storage 5-1:1.0 [ 129.294328] usb 5-1: adding 5-1:1.1 (config #1, interface 1) [ 129.294355] usb-storage 5-1:1.1: usb_probe_interface [ 129.294361] usb-storage 5-1:1.1: usb_probe_interface - got id [ 129.294407] scsi8 : usb-storage 5-1:1.1 [ 129.298576] usb 5-1: adding 5-1:1.2 (config #1, interface 2) [ 129.298603] usbhid 5-1:1.2: usb_probe_interface [ 129.298605] usbhid 5-1:1.2: usb_probe_interface - got id [ 129.303863] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.2/input/input6 [ 129.314374] generic-usb 0003:14DD:0002.0005: input,hidraw0: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:1d.3-1/input2 [ 129.327029] usb 5-1: adding 5-1:1.3 (config #1, interface 3) [ 129.327063] usbhid 5-1:1.3: usb_probe_interface [ 129.327066] usbhid 5-1:1.3: usb_probe_interface - got id [ 129.332049] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.3/input/input7 [ 129.342483] uhci_hcd 0000:00:1d.3: reserve dev 4 ep86-INT, period 8, phase 4, 61 us [ 129.342528] generic-usb 0003:14DD:0002.0006: input,hidraw1: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:1d.3-1/input3 [ 129.355442] drivers/usb/core/inode.c: creating file '004' [ 129.355462] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 [ 129.355475] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 129.355485] hub 1-0:1.0: port 7, status 0100, change 0001, 12 Mb/s [ 129.507741] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x100 [ 130.291836] scsi 7:0:0:0: CD-ROM PepperC Virtual Disc 1 0.01 PQ: 0 ANSI: 3 [ 130.304835] scsi 8:0:0:0: CD-ROM PepperC Virtual Disc 2 0.01 PQ: 0 ANSI: 3 [ 130.324827] sr1: scsi-1 drive [ 130.328203] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 130.328253] sr 7:0:0:0: Attached scsi generic sg5 type 5 [ 130.333887] sr2: scsi-1 drive [ 130.337212] sr 8:0:0:0: Attached scsi CD-ROM sr2 [ 130.337255] sr 8:0:0:0: Attached scsi generic sg6 type 5