| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 25 May 2012 13:13:50 +0900
From: Jonghwa Lee <jonghwa3.lee@...sung.com>
To: linux-kernel@...r.kernel.org
Cc: Liam Girdwood <lrg@...com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Jonghwa Lee <jonghwa3.lee@...sung.com>,
Chiwoong Byun <woong.byun@...sung.com>,
Myungjoo Ham <myungjoo.ham@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>
Subject: [PATCH v4] regulator: MAX77686: Add Maxim 77686 regulator driver
Add driver for support max77686 regulator.
MAX77686 provides LDOs[1~26] and BUCKs[1~9]. It support to set or get the
volatege of regulator on max77686 chip with using regmap.
v4
- Register Crystal oscillator's clocks with generic clock API.
v3
- Remove voltage_map_desc structure and replace minimum voltage and voltage
step into regulator_desc.
- Use only regulator common APIs for regulator_ops.
(No more use driver's own funcions)
This patch is based on broonie/regulator/for-next branch.
v2
- Convert get_voltage to get_voltage_sel
- Convert set_voltage to set_voltage_sel
- Implement set_voltage_time_sel
- Register regulators unconditionally
- kzalloc -> devm_kzalloc
- Remove unneccessary printk
- Keep probing whether pdata exists or not
- Use regmap API to access PMIC register.
Signed-off-by: Chiwoong Byun <woong.byun@...sung.com>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@...sung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@...sung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
---
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/max77686.c | 540 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 549 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/max77686.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 36db5a4..8e2ebad 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -195,6 +195,14 @@ config REGULATOR_MAX8998
via I2C bus. The provided regulator is suitable for S3C6410
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
+config REGULATOR_MAX77686
+ tristate "Maxim 77686 regulator"
+ depends on MFD_MAX77686
+ help
+ This driver controls a Maxim 77686 regulator
+ via I2C bus. The provided regulator is suitable for
+ Exynos-4 chips to control VARM and VINT voltages.
+
config REGULATOR_PCAP
tristate "Motorola PCAP2 regulator driver"
depends on EZX_PCAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 94b5274..008931b 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
+obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
new file mode 100644
index 0000000..f412094
--- /dev/null
+++ b/drivers/regulator/max77686.c
@@ -0,0 +1,540 @@
+/*
+ * max77686.c - Regulator driver for the Maxim 77686
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Chiwoong Byun <woong.byun@...sung.com>
+ * Jonghwa Lee <jonghwa3.lee@...sung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * This driver is based on max8997.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max77686.h>
+#include <linux/mfd/max77686-private.h>
+
+#ifdef CONFIG_COMMON_CLK
+#include <linux/clk-private.h>
+#endif
+
+#define MAX77686_LDO_MINUV 800000
+#define MAX77686_LDO_UVSTEP 50000
+#define MAX77686_LDO_LOW_MINUV 800000
+#define MAX77686_LDO_LOW_UVSTEP 25000
+#define MAX77686_BUCK_MINUV 750000
+#define MAX77686_BUCK_UVSTEP 50000
+#define MAX77686_DVS_MINUV 600000
+#define MAX77686_DVS_UVSTEP 12500
+
+#define MAX77686_OPMODE_SHIFT 6
+#define MAX77686_OPMODE_BUCK234_SHIFT 4
+#define MAX77686_OPMODE_MASK 0x3
+
+#define MAX77686_VSEL_MASK 0x3f
+#define MAX77686_DVS_VSEL_MASK 0xff
+
+#define MAX77686_RAMP_RATE 100
+
+#define MAX77686_REGULATORS MAX77686_REG_MAX
+#define MAX77686_LDOS 26
+
+struct max77686_data {
+ struct device *dev;
+ struct max77686_dev *iodev;
+ int num_regulators;
+ struct regulator_dev **rdev;
+ int ramp_delay; /* in mV/us */
+
+#ifdef CONFIG_COMMON_CLK
+ struct clk clk32khz_ap;
+ struct clk clk32khz_cp;
+ struct clk clk32khz_pmic;
+#endif
+ struct max77686_opmode_data *opmode_data;
+
+ u8 buck2_vol[8];
+ u8 buck3_vol[8];
+ u8 buck4_vol[8];
+};
+
+#ifdef CONFIG_COMMON_CLK
+
+#define to_max77686_data(__name) container_of(hw->clk, \
+ struct max77686_data, __name)
+
+static struct clk_gate clk32khz_ap_hw = {
+ .ret = MAX77686_REG_32KH,
+ .bit_idx = 0,
+ .flags = 0,
+ .lock = clk_lock,
+};
+
+static struct clk_gate clk32khz_cp_hw = {
+ .ret = MAX77686_REG_32KH,
+ .bit_idx = 1,
+ .flags = 0,
+ .lock = clk_lock,
+};
+
+static struct clk_gate clk32khz_pmic_hw = {
+ .ret = MAX77686_REG_32KH,
+ .bit_idx = 2,
+ .flags = 0,
+ .lock = clk_lock,
+};
+
+static int *clk_enable(struct clk_hw *hw);
+static void *clk_disable(struct clk_hw *hw);
+static int *clk_is_enable(struct clk_hw *hw);
+
+static struct clk_ops clk32khz_ops {
+ .enable = clk_enable,
+ .disable = clk_disable,
+ .is_enable = cli_is_enable,
+};
+#endif
+
+static int max77686_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector, unsigned int new_selector)
+{
+ struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+ int rid = rdev_get_id(rdev);
+
+ switch (rid) {
+ case MAX77686_BUCK2 ... MAX77686_BUCK4:
+ return (DIV_ROUND_UP(rdev->desc->uV_step
+ * abs(new_selector - old_selector),
+ max77686->ramp_delay * 1000));
+ }
+ /* Unconditionally 100 mV/us */
+ return (DIV_ROUND_UP(rdev->desc->uV_step
+ * abs(new_selector - old_selector), 100000));
+}
+
+static struct regulator_ops max77686_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = max77686_set_voltage_time_sel,
+};
+
+static struct regulator_ops max77686_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = max77686_set_voltage_time_sel,
+};
+
+#define regulator_desc_ldo(num) { \
+ .name = "LDO"#num, \
+ .id = MAX77686_LDO##num, \
+ .ops = &max77686_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = MAX77686_LDO_MINUV, \
+ .uV_step = MAX77686_LDO_UVSTEP, \
+ .n_voltages = MAX77686_VSEL_MASK + 1, \
+ .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .vsel_mask = MAX77686_VSEL_MASK, \
+ .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .enable_mask = MAX77686_OPMODE_MASK \
+ << MAX77686_OPMODE_SHIFT, \
+}
+#define regulator_desc_ldo_low(num) { \
+ .name = "LDO"#num, \
+ .id = MAX77686_LDO##num, \
+ .ops = &max77686_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = MAX77686_LDO_LOW_MINUV, \
+ .uV_step = MAX77686_LDO_LOW_UVSTEP, \
+ .n_voltages = MAX77686_VSEL_MASK + 1, \
+ .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .vsel_mask = MAX77686_VSEL_MASK, \
+ .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .enable_mask = MAX77686_OPMODE_MASK \
+ << MAX77686_OPMODE_SHIFT, \
+}
+#define regulator_desc_buck(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77686_BUCK##num, \
+ .ops = &max77686_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = MAX77686_BUCK_MINUV, \
+ .uV_step = MAX77686_BUCK_UVSTEP, \
+ .n_voltages = MAX77686_VSEL_MASK + 1, \
+ .vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \
+ .vsel_mask = MAX77686_VSEL_MASK, \
+ .enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \
+ .enable_mask = MAX77686_OPMODE_MASK, \
+}
+#define regulator_desc_buck1(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77686_BUCK##num, \
+ .ops = &max77686_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = MAX77686_BUCK_MINUV, \
+ .uV_step = MAX77686_BUCK_UVSTEP, \
+ .n_voltages = MAX77686_VSEL_MASK + 1, \
+ .vsel_reg = MAX77686_REG_BUCK1OUT, \
+ .vsel_mask = MAX77686_VSEL_MASK, \
+ .enable_reg = MAX77686_REG_BUCK1CTRL, \
+ .enable_mask = MAX77686_OPMODE_MASK, \
+}
+#define regulator_desc_buck_dvs(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77686_BUCK##num, \
+ .ops = &max77686_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = MAX77686_DVS_MINUV, \
+ .uV_step = MAX77686_DVS_UVSTEP, \
+ .n_voltages = MAX77686_DVS_VSEL_MASK + 1, \
+ .vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \
+ .vsel_mask = MAX77686_DVS_VSEL_MASK, \
+ .enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \
+ .enable_mask = MAX77686_OPMODE_MASK \
+ << MAX77686_OPMODE_BUCK234_SHIFT, \
+}
+
+static struct regulator_desc regulators[] = {
+ regulator_desc_ldo_low(1),
+ regulator_desc_ldo_low(2),
+ regulator_desc_ldo(3),
+ regulator_desc_ldo(4),
+ regulator_desc_ldo(5),
+ regulator_desc_ldo_low(6),
+ regulator_desc_ldo_low(7),
+ regulator_desc_ldo_low(8),
+ regulator_desc_ldo(9),
+ regulator_desc_ldo(10),
+ regulator_desc_ldo(11),
+ regulator_desc_ldo(12),
+ regulator_desc_ldo(13),
+ regulator_desc_ldo(14),
+ regulator_desc_ldo_low(15),
+ regulator_desc_ldo(16),
+ regulator_desc_ldo(17),
+ regulator_desc_ldo(18),
+ regulator_desc_ldo(19),
+ regulator_desc_ldo(20),
+ regulator_desc_ldo(21),
+ regulator_desc_ldo(22),
+ regulator_desc_ldo(23),
+ regulator_desc_ldo(24),
+ regulator_desc_ldo(25),
+ regulator_desc_ldo(26),
+ regulator_desc_buck1(1),
+ regulator_desc_buck_dvs(2),
+ regulator_desc_buck_dvs(3),
+ regulator_desc_buck_dvs(4),
+ regulator_desc_buck(5),
+ regulator_desc_buck(6),
+ regulator_desc_buck(7),
+ regulator_desc_buck(8),
+ regulator_desc_buck(9),
+};
+
+#ifdef CONFIG_COMMON_CLK
+static int *clk_enable(struct clk_hw *hw)
+{
+ struct max77686_data *max77686 = NULL;
+ struct regmap *regmap;
+ int mask;
+
+ if (hw == &clk32khz_ap_hw) {
+ max77686 = to_max77686_dev(clk32khz_ap);
+ mask = (1 << MAX77686_32KH_AP);
+ } else if (hw == &clk32khz_cp_hw) {
+ max77686 = to_max77686_dev(clk32khz_cp);
+ mask = (1 << MAX77686_32KH_CP);
+ } else if (hw == &clk32khz_pmic_hw) {
+ max77686 = to_max77686_dev(clk32khz_pmic);
+ maske = (1 << MAX77686_P32KH);
+ }
+
+ if (!max77686)
+ return -ENOMEM;
+
+ return regmap_update_bits(regmap, MAX77686_REG_32KHZ, mask, 1);
+}
+
+static void *clk_disable(struct clk_hw *hw)
+{
+ struct max77686_data *max77686 = NULL;
+ struct regmap *regmap;
+ int mask;
+
+ if (hw == &clk32khz_ap_hw) {
+ max77686 = to_max77686_dev(clk32khz_ap);
+ mask = (1 << MAX77686_32KH_AP);
+ } else if (hw == &clk32khz_cp_hw) {
+ max77686 = to_max77686_dev(clk32khz_cp);
+ mask = (1 << MAX77686_32KH_CP);
+ } else if (hw == &clk32khz_pmic_hw) {
+ max77686 = to_max77686_dev(clk32khz_pmic);
+ maske = (1 << MAX77686_P32KH);
+ }
+
+ if (!max77686)
+ return -ENOMEM;
+
+ return regmap_update_bits(regmap, MAX77686_REG_32KHZ, mask, 0);
+}
+
+static int *clk_is_enable(struct clk_hw *hw)
+{
+ struct max77686_data *max77686 = NULL;
+ struct regmap *regmap;
+ int mask, ret;
+ u8 val;
+
+ if (hw == &clk32khz_ap_hw) {
+ max77686 = to_max77686_dev(clk32khz_ap);
+ mask = (1 << MAX77686_32KH_AP);
+ } else if (hw == &clk32khz_cp_hw) {
+ max77686 = to_max77686_dev(clk32khz_cp);
+ mask = (1 << MAX77686_32KH_CP);
+ } else if (hw == &clk32khz_pmic_hw) {
+ max77686 = to_max77686_dev(clk32khz_pmic);
+ maske = (1 << MAX77686_P32KH);
+ }
+
+ if (!max77686)
+ return -ENOMEM;
+
+ ret = regmap_read(regamp, MAX77686_REG_32KHZ, &val);
+ if (ret < 0)
+ return -EINVAL;
+
+ return val & mask;
+}
+
+static int set_max77686_clk_init(int cid, struct clk *clk)
+{
+ switch (cid) {
+ case MAX77686_32KH_AP:
+ clk->name = "32khap";
+ clk->hw = &clk32khz_ap_hw;
+ break;
+ case MAX77686_32KH_CP:
+ clk->name = "32khcp";
+ clk->hw = &clk32khz_cp_hw;
+ break;
+ case MAX77686_P32KH:
+ clk->name = "p32kh";
+ clk->hw = &clk32khz_pmic_hw;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ clk->ops = &clk_ops;
+ clk->flags = CLK_IS_ROOT;
+ clk->hw->clk = clk;
+ return 0;
+}
+#endif /* CONFIG_COMMON_CLK */
+
+static __devinit int max77686_pmic_probe(struct platform_device *pdev)
+{
+ struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct regulator_dev **rdev;
+ struct max77686_data *max77686;
+ struct regulator_init_data **init_data;
+ int i, size;
+ int ret = 0;
+ struct regulator_config config;
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
+ GFP_KERNEL);
+ if (!max77686)
+ return -ENOMEM;
+
+ size = sizeof(struct regulator_dev *) * MAX77686_REGULATORS;
+ max77686->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (!max77686->rdev)
+ return -ENOMEM;
+
+ rdev = max77686->rdev;
+ max77686->dev = &pdev->dev;
+ max77686->iodev = iodev;
+ if (pdata)
+ max77686->num_regulators = pdata->num_regulators;
+ platform_set_drvdata(pdev, max77686);
+ init_data = devm_kzalloc(&pdev->dev,
+ sizeof(struct regulator_init_data *)
+ * MAX77686_REGULATORS, GFP_KERNEL);
+ if (!init_data)
+ return -ENOMEM;
+
+ config.dev = max77686->dev;
+ config.regmap = iodev->regmap;
+ config.driver_data = max77686;
+
+ if (pdata)
+ max77686->opmode_data = pdata->opmode_data;
+
+ max77686->ramp_delay = MAX77686_RAMP_RATE; /* Set 0x3 for RAMP */
+ regmap_update_bits(max77686->iodev->regmap,
+ MAX77686_REG_BUCK2CTRL1, 0xC0, 0xC0);
+ regmap_update_bits(max77686->iodev->regmap,
+ MAX77686_REG_BUCK3CTRL1, 0xC0, 0xC0);
+ regmap_update_bits(max77686->iodev->regmap,
+ MAX77686_REG_BUCK4CTRL1, 0xC0, 0xC0);
+
+ for (i = 0; i < MAX77686_REGULATORS; i++) {
+ if (pdata)
+ init_data[pdata->regulators[i].id] =
+ pdata->regulators[i].initdata;
+
+ config.init_data = init_data[i];
+ rdev[i] = regulator_register(®ulators[i], &config);
+
+ if (IS_ERR(rdev[i])) {
+ ret = PTR_ERR(rdev[i]);
+ dev_err(max77686->dev,
+ "regulator init failed for %d\n", i);
+ rdev[i] = NULL;
+ goto err;
+ }
+ }
+
+#ifdef CONFIG_COMMON_CLK
+ set_max77686_clk_init(MAX77686_32KH_AP, &max77686->clk32khz_ap);
+ set_max77686_clk_init(MAX77686_32KH_CP, &max77686->clk32khz_cp);
+ set_max77686_clk_init(MAX77686_P32KH, &max77686->clk32khz_pmic);
+ __clk_init(&pdev->dev, &max77686->clk32khz_ap);
+ __clk_init(&pdev->dev, &max77686->clk32khz_cp);
+ __clk_init(&pdev->dev, &max77686->clk32khz_pmic);
+#endif
+
+ for (i = 0; i < 8; i++) {
+ if (pdata->buck2_voltage[i] > 0)
+ ret = regulator_map_voltage_linear(
+ rdev[MAX77686_LDOS+1],
+ pdata->buck2_voltage[i],
+ pdata->buck2_voltage[i]
+ + MAX77686_DVS_UVSTEP);
+ /* 1.1V as default for safety */
+ if (pdata->buck2_voltage[i] <= 0 || ret < 0)
+ max77686->buck2_vol[i] = 0x28;
+ else
+ max77686->buck2_vol[i] = ret;
+ regmap_write(max77686->iodev->regmap,
+ MAX77686_REG_BUCK2DVS1 + i, max77686->buck2_vol[i]);
+
+ if (pdata->buck3_voltage[i] > 0)
+ ret = regulator_map_voltage_linear(
+ rdev[MAX77686_LDOS+1],
+ pdata->buck3_voltage[i],
+ pdata->buck3_voltage[i]
+ + MAX77686_DVS_UVSTEP);
+ /* 1.1V as default for safety */
+ if (pdata->buck3_voltage[i] <= 0 || ret < 0)
+ max77686->buck3_vol[i] = 0x28;
+ else
+ max77686->buck3_vol[i] = ret;
+ regmap_write(max77686->iodev->regmap,
+ MAX77686_REG_BUCK3DVS1 + i, max77686->buck3_vol[i]);
+
+ if (pdata->buck4_voltage[i] > 0)
+ ret = regulator_map_voltage_linear(
+ rdev[MAX77686_LDOS+1],
+ pdata->buck4_voltage[i],
+ pdata->buck4_voltage[i]
+ + MAX77686_DVS_UVSTEP);
+ /* 1.1V as default for safety */
+ if (pdata->buck4_voltage[i] <= 0 || ret < 0)
+ max77686->buck4_vol[i] = 0x28;
+ else
+ max77686->buck4_vol[i] = ret;
+ regmap_write(max77686->iodev->regmap,
+ MAX77686_REG_BUCK4DVS1 + i, max77686->buck4_vol[i]);
+ }
+
+ return 0;
+err:
+ for (i = 0; i < MAX77686_REGULATORS; i++) {
+ if (rdev[i])
+ regulator_unregister(rdev[i]);
+ }
+ return ret;
+}
+
+static int __devexit max77686_pmic_remove(struct platform_device *pdev)
+{
+ struct max77686_data *max77686 = platform_get_drvdata(pdev);
+ struct regulator_dev **rdev = max77686->rdev;
+ int i;
+
+ for (i = 0; i < MAX77686_REGULATORS; i++)
+ if (rdev[i])
+ regulator_unregister(rdev[i]);
+
+ return 0;
+}
+
+static const struct platform_device_id max77686_pmic_id[] = {
+ { "max77686-pmic", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(platform, max77686_pmic_id);
+
+static struct platform_driver max77686_pmic_driver = {
+ .driver = {
+ .name = "max77686-pmic",
+ .owner = THIS_MODULE,
+ },
+ .probe = max77686_pmic_probe,
+ .remove = __devexit_p(max77686_pmic_remove),
+ .id_table = max77686_pmic_id,
+};
+
+static int __init max77686_pmic_init(void)
+{
+ return platform_driver_register(&max77686_pmic_driver);
+}
+subsys_initcall(max77686_pmic_init);
+
+static void __exit max77686_pmic_cleanup(void)
+{
+ platform_driver_unregister(&max77686_pmic_driver);
+}
+module_exit(max77686_pmic_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver");
+MODULE_AUTHOR("Chiwoong Byun <woong.byun@...sung.com>");
+MODULE_LICENSE("GPL");
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists