lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Sat, 26 May 2012 13:11:08 +0700 From: Comrade DOS <suloevdmitry@...il.com> To: linux-kernel@...r.kernel.org Subject: PROBLEM: Performance drop ---------- Forwarded message ---------- From: Comrade DOS <suloevdmitry@...il.com> Date: 2012/5/24 Subject: Re: PROBLEM: Performance drop To: Andreas Herrmann <herrmann.der.user@...glemail.com> > What was the kernel release used before 3.4.0 was install on your > Laptop? I rollback to linux 3.3.5. It's work fine on this laptop. > Please provide dmesg with apic=debug kernel option when kernel 3.4 is > booted? Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.0 (root@dos) (gcc version 4.6.3 (Gentoo 4.6.3 p1.0, pie-0.5.1) ) #2 SMP PREEMPT Thu May 24 22:49:31 OMST 2012 Command line: root=/dev/sda3 acpi=debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable) BIOS-e820: 00000000b7fb0000 - 00000000b7fc8000 (reserved) BIOS-e820: 00000000b7fc8000 - 00000000b7fe7fb8 (ACPI NVS) BIOS-e820: 00000000b7fe7fb8 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Malformed early option 'acpi' NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6715b (GB833EA#ACB)/30C2, BIOS 68YTT Ver. F.0E 11/25/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-00000000b7fb0000 0000000000 - 00b7e00000 page 2M 00b7e00000 - 00b7fb0000 page 4k kernel direct mapping tables up to b7fb0000 @ 1fffb000-20000000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ b7faa000-b7fb0000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 00000000b7fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 00000000b7fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20120320/tbfadt-443) ACPI: DSDT 00000000b7fc84a4 11A38 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 00000000b7fe7d80 00040 ACPI: SLIC 00000000b7fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 00000000b7fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 00000000b7fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 00000000b7fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 00000000b7fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 00000000b7fd9edc 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 00000000b7fd9f35 00136 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000b7fb0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1015615 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3914 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 733168 pages, LIFO batch:31 Normal zone: 4096 pages used for memmap Normal zone: 258048 pages, LIFO batch:31 SB600 revision 0x14 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fc8000 PM: Registered nosave memory: 00000000b7fc8000 - 00000000b7fe7000 PM: Registered nosave memory: 00000000b7fe7000 - 00000000b7fe8000 PM: Registered nosave memory: 00000000b7fe8000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000 PM: Registered nosave memory: 00000000fec02000 - 00000000ffbc0000 PM: Registered nosave memory: 00000000ffbc0000 - 00000000ffcc0000 PM: Registered nosave memory: 00000000ffcc0000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88013fc00000 s71744 r8192 d22464 u1048576 pcpu-alloc: s71744 r8192 d22464 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995130 Kernel command line: root=/dev/sda3 acpi=debug PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ ac000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ ac000000 PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000 Memory: 3853536k/5242880k available (4382k kernel code, 1180420k absent, 208924k reserved, 1971k data, 432k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 2194.526 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.05 BogoMIPS (lpj=2194526) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer tseg: 0000000000 mce: CPU supports 5 MCE banks LVT offset 0 assigned for vector 0xf9 using AMD E400 aware idle routine SMP alternatives: switching to UP code ACPI: Core revision 20120320 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: Mobile AMD Sempron(tm) Processor 3800+ stepping 02 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Brought up 1 CPUs Total of 1 processors activated (4389.05 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xb7fc8000-0xb7fe7fb7] (131000 bytes) NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, bfffffff] TOM2: 0000000140000000 aka 5120M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xc0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x140000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C231] (off) ACPI: Power Resource [C24D] (on) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: Power Resource [C399] (off) ACPI: Power Resource [C39A] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfedfffff] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000 pci 0000:00:01.0: [1002:7912] type 01 class 0x060400 pci 0000:00:04.0: [1002:7914] type 01 class 0x060400 pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:7915] type 01 class 0x060400 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: [1002:7916] type 01 class 0x060400 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xd0609000-0xd06093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xd0601000-0xd0601fff] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 pci 0000:00:13.1: reg 10: [mem 0xd0602000-0xd0602fff] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 pci 0000:00:13.2: reg 10: [mem 0xd0603000-0xd0603fff] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 pci 0000:00:13.3: reg 10: [mem 0xd0604000-0xd0604fff] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 pci 0000:00:13.4: reg 10: [mem 0xd0605000-0xd0605fff] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 pci 0000:00:13.5: reg 10: [mem 0xd0606000-0xd06060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 00 class 0x010182 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xd0608000-0xd060bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 pci 0000:01:05.0: [1002:791f] type 00 class 0x030000 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xd0400000-0xd040ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xd0500000-0xd05fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:10:00.0: [14e4:1693] type 00 class 0x020000 pci 0000:10:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] pci 0000:10:00.0: PME# supported from D3hot D3cold pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:30:00.0: [14e4:4312] type 00 class 0x028000 pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff 64bit] pci 0000:30:00.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: [1180:0476] type 02 class 0x060700 pci 0000:02:04.0: reg 10: [mem 0xd0100000-0xd0100fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.1: [1180:0832] type 00 class 0x0c0010 pci 0000:02:04.1: reg 10: [mem 0xd0101000-0xd01017ff] pci 0000:02:04.1: supports D1 D2 pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfedfffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xd0608000-0xd060bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd0609000-0xd06093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xc0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (disabled) pnp 00:03: [io 0x00f0-0x00ff] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: [io 0x0072-0x0073] pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x0023] pnp 00:09: [io 0x002e-0x002f] pnp 00:09: [io 0x004e-0x004f] pnp 00:09: [io 0x0092] pnp 00:09: [io 0x00b0-0x00b1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0500-0x053f] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cdf] pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0500-0x053f] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cdf] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: [mem 0xfff00000-0xffffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [irq 22] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0b: [io 0x8000-0x802f] pnp 00:0b: [io 0x8100-0x811f] pnp 00:0b: [mem 0xe0000000-0xefffffff] pnp 00:0b: [mem 0xfec00000-0xfec000ff] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] system 00:0b: [io 0x8000-0x802f] has been reserved system 00:0b: [io 0x8100-0x811f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x000cd400-0x000cffff] pnp 00:0c: [mem 0x00000000-0x07ffffff] pnp 00:0c: [mem 0xfee00000-0xfee00fff] system 00:0c: [mem 0x000cd400-0x000cffff] has been reserved system 00:0c: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:00:14.4: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000 pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000 pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 pci 0000:00:14.4: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0xc8100000-0xc8103fff 64bit] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff] pci 0000:02:04.0: BAR 13: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 14: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: bridge window [mem 0xd8000000-0xdbffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd05fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd00fffff] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd03fffff] pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ ac000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1337876856.453:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7655 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 40 for MSI/MSI-X pcieport 0000:00:05.0: irq 41 for MSI/MSI-X pcieport 0000:00:06.0: irq 42 for MSI/MSI-X ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C1F0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: Fan [C39D] (off) ACPI: Fan [C39E] (off) acpi device:02: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3 ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (62 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ2] (50 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ3] (31 C) Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@...0609000 port 0xd0609100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 i8042: PNP: PS/2 Controller [PNP0303:C24A,PNP0f13:C24B] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 TCP: cubic registered ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) ata5.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 ata5.00: configured for MWDMA2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST9120822AS, 3.BHE, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.BH PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 registered taskstats version 1 powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3800+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0xe (2200 MHz), vid 0xd powernow-k8: fid 0xc (2000 MHz), vid 0xf powernow-k8: fid 0xa (1800 MHz), vid 0x11 powernow-k8: fid 0x8 (1600 MHz), vid 0x13 powernow-k8: fid 0x0 (800 MHz), vid 0x18 EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 432k freed NET: Registered protocol family 1 udevd[810]: starting version 182 hp_accel: hardware type NC6715x found lis3lv02d: 12 bits sensor found microcode: AMD CPU family 0xf not supported input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 Registered led device: hp::hddprotect hp_accel: driver loaded ssb: Found chip with id 0x4311, rev 0x02 and package 0x00 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243) k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 tg3.c:v3.123 (March 21, 2012) ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 cfg80211: Calling CRDA to update world regulatory domain tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1a:4b:76:46:6e tg3 0000:10:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:10:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after hda-codec: No codec parser is available ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000 b43-phy0: Broadcom 4311 WLAN found (core revision 13) Broadcom 43xx driver loaded [ Features: P ] hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' usb 4-1: new full-speed USB device number 2 using ohci_hcd usb 1-2: new full-speed USB device number 2 using ohci_hcd usb 3-1: new low-speed USB device number 2 using ohci_hcd Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized usbcore: registered new interface driver btusb input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input7 generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver EXT4-fs (sda3): re-mounted. Opts: (null) tg3 0000:10:00.0: irq 43 for MSI/MSI-X b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) NET: Registered protocol family 17 [drm] Setting GART location based on new memory map [drm] Loading RS690/RS740 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs wlan0: authenticate with 00:21:91:82:3c:30 wlan0: send auth to 00:21:91:82:3c:30 (try 1/3) wlan0: authenticated wlan0: associate with 00:21:91:82:3c:30 (try 1/3) wlan0: RX AssocResp from 00:21:91:82:3c:30 (capab=0x411 status=0 aid=1) wlan0: associated EXT4-fs (sda3): re-mounted. Opts: commit=0 [drm] Num pipes: 1 > Can you please try to boot with kernel paramter > acpi_use_timer_override in another test run and with Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.0 (root@dos) (gcc version 4.6.3 (Gentoo 4.6.3 p1.0, pie-0.5.1) ) #2 SMP PREEMPT Thu May 24 22:49:31 OMST 2012 Command line: root=/dev/sda3 acpi=debug acpi_use_timer_override BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable) BIOS-e820: 00000000b7fb0000 - 00000000b7fc8000 (reserved) BIOS-e820: 00000000b7fc8000 - 00000000b7fe7fb8 (ACPI NVS) BIOS-e820: 00000000b7fe7fb8 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Malformed early option 'acpi' NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6715b (GB833EA#ACB)/30C2, BIOS 68YTT Ver. F.0E 11/25/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-00000000b7fb0000 0000000000 - 00b7e00000 page 2M 00b7e00000 - 00b7fb0000 page 4k kernel direct mapping tables up to b7fb0000 @ 1fffb000-20000000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ b7faa000-b7fb0000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 00000000b7fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 00000000b7fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20120320/tbfadt-443) ACPI: DSDT 00000000b7fc84a4 11A38 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 00000000b7fe7d80 00040 ACPI: SLIC 00000000b7fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 00000000b7fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 00000000b7fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 00000000b7fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 00000000b7fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 00000000b7fd9edc 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 00000000b7fd9f35 00136 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000b7fb0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1015615 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3914 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 733168 pages, LIFO batch:31 Normal zone: 4096 pages used for memmap Normal zone: 258048 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ------------[ cut here ]------------ WARNING: at arch/x86/kernel/acpi/boot.c:1346 dmi_ignore_irq0_timer_override+0x27/0x47() Hardware name: HP Compaq 6715b (GB833EA#ACB) ati_ixp4x0 quirk not complete. Modules linked in: Pid: 0, comm: swapper Not tainted 3.4.0 #2 Call Trace: [<ffffffff8164ee08>] ? dmi_ignore_irq0_timer_override+0x27/0x47 [<ffffffff8102e05b>] ? warn_slowpath_common+0x7b/0xc0 [<ffffffff8102e155>] ? warn_slowpath_fmt+0x45/0x50 [<ffffffff8164ee08>] ? dmi_ignore_irq0_timer_override+0x27/0x47 [<ffffffff8138f9b3>] ? dmi_check_system+0x33/0x50 [<ffffffff8164f5d7>] ? acpi_boot_init+0x10/0x34c [<ffffffff81649bb5>] ? setup_arch+0x6da/0x763 [<ffffffff81648820>] ? start_kernel+0x86/0x2e9 ---[ end trace 4eaa2a86a8e2da22 ]--- HP 6715b laptop detected: Ignoring BIOS IRQ0 pin2 override ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fc8000 PM: Registered nosave memory: 00000000b7fc8000 - 00000000b7fe7000 PM: Registered nosave memory: 00000000b7fe7000 - 00000000b7fe8000 PM: Registered nosave memory: 00000000b7fe8000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000 PM: Registered nosave memory: 00000000fec02000 - 00000000ffbc0000 PM: Registered nosave memory: 00000000ffbc0000 - 00000000ffcc0000 PM: Registered nosave memory: 00000000ffcc0000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88013fc00000 s71744 r8192 d22464 u1048576 pcpu-alloc: s71744 r8192 d22464 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995130 Kernel command line: root=/dev/sda3 acpi=debug acpi_use_timer_override PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 8000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ ac000000 PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000 Memory: 3853536k/5242880k available (4382k kernel code, 1180420k absent, 208924k reserved, 1971k data, 432k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 2193.768 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.53 BogoMIPS (lpj=2193768) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer tseg: 0000000000 mce: CPU supports 5 MCE banks LVT offset 0 assigned for vector 0xf9 using AMD E400 aware idle routine SMP alternatives: switching to UP code ACPI: Core revision 20120320 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: Mobile AMD Sempron(tm) Processor 3800+ stepping 02 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Brought up 1 CPUs Total of 1 processors activated (4387.53 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xb7fc8000-0xb7fe7fb7] (131000 bytes) NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, bfffffff] TOM2: 0000000140000000 aka 5120M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xc0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x140000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C231] (off) ACPI: Power Resource [C24D] (on) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: Power Resource [C399] (off) ACPI: Power Resource [C39A] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfedfffff] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000 pci 0000:00:01.0: [1002:7912] type 01 class 0x060400 pci 0000:00:04.0: [1002:7914] type 01 class 0x060400 pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:7915] type 01 class 0x060400 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: [1002:7916] type 01 class 0x060400 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xd0609000-0xd06093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xd0601000-0xd0601fff] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 pci 0000:00:13.1: reg 10: [mem 0xd0602000-0xd0602fff] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 pci 0000:00:13.2: reg 10: [mem 0xd0603000-0xd0603fff] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 pci 0000:00:13.3: reg 10: [mem 0xd0604000-0xd0604fff] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 pci 0000:00:13.4: reg 10: [mem 0xd0605000-0xd0605fff] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 pci 0000:00:13.5: reg 10: [mem 0xd0606000-0xd06060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 00 class 0x010182 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xd0608000-0xd060bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 pci 0000:01:05.0: [1002:791f] type 00 class 0x030000 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xd0400000-0xd040ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xd0500000-0xd05fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:10:00.0: [14e4:1693] type 00 class 0x020000 pci 0000:10:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] pci 0000:10:00.0: PME# supported from D3hot D3cold pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:30:00.0: [14e4:4312] type 00 class 0x028000 pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff 64bit] pci 0000:30:00.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: [1180:0476] type 02 class 0x060700 pci 0000:02:04.0: reg 10: [mem 0xd0100000-0xd0100fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.1: [1180:0832] type 00 class 0x0c0010 pci 0000:02:04.1: reg 10: [mem 0xd0101000-0xd01017ff] pci 0000:02:04.1: supports D1 D2 pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfedfffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xd0608000-0xd060bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd0609000-0xd06093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xc0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (disabled) pnp 00:03: [io 0x00f0-0x00ff] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: [io 0x0072-0x0073] pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x0023] pnp 00:09: [io 0x002e-0x002f] pnp 00:09: [io 0x004e-0x004f] pnp 00:09: [io 0x0092] pnp 00:09: [io 0x00b0-0x00b1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0500-0x053f] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cdf] pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0500-0x053f] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cdf] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: [mem 0xfff00000-0xffffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [irq 22] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0b: [io 0x8000-0x802f] pnp 00:0b: [io 0x8100-0x811f] pnp 00:0b: [mem 0xe0000000-0xefffffff] pnp 00:0b: [mem 0xfec00000-0xfec000ff] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] system 00:0b: [io 0x8000-0x802f] has been reserved system 00:0b: [io 0x8100-0x811f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x000cd400-0x000cffff] pnp 00:0c: [mem 0x00000000-0x07ffffff] pnp 00:0c: [mem 0xfee00000-0xfee00fff] system 00:0c: [mem 0x000cd400-0x000cffff] has been reserved system 00:0c: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:00:14.4: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000 pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000 pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 pci 0000:00:14.4: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0xc8100000-0xc8103fff 64bit] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff] pci 0000:02:04.0: BAR 13: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 14: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: bridge window [mem 0xd8000000-0xdbffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd05fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd00fffff] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd03fffff] pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ ac000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1337877078.452:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7655 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 40 for MSI/MSI-X pcieport 0000:00:05.0: irq 41 for MSI/MSI-X pcieport 0000:00:06.0: irq 42 for MSI/MSI-X ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C1F0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: Fan [C39D] (off) ACPI: Fan [C39E] (off) acpi device:02: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3 ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (64 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ2] (51 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ3] (31 C) Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@...0609000 port 0xd0609100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 i8042: PNP: PS/2 Controller [PNP0303:C24A,PNP0f13:C24B] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 TCP: cubic registered ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) ata5.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 ata5.00: configured for MWDMA2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST9120822AS, 3.BHE, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.BH PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 registered taskstats version 1 powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3800+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0xe (2200 MHz), vid 0xd powernow-k8: fid 0xc (2000 MHz), vid 0xf powernow-k8: fid 0xa (1800 MHz), vid 0x11 powernow-k8: fid 0x8 (1600 MHz), vid 0x13 powernow-k8: fid 0x0 (800 MHz), vid 0x18 EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 432k freed NET: Registered protocol family 1 udevd[810]: starting version 182 hp_accel: hardware type NC6715x found lis3lv02d: 12 bits sensor found k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 Registered led device: hp::hddprotect hp_accel: driver loaded tg3.c:v3.123 (March 21, 2012) ssb: Found chip with id 0x4311, rev 0x02 and package 0x00 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. usbcore: registered new device driver usb tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1a:4b:76:46:6e tg3 0000:10:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:10:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after cfg80211: Calling CRDA to update world regulatory domain hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 hda-codec: No codec parser is available ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000 microcode: AMD CPU family 0xf not supported b43-phy0: Broadcom 4311 WLAN found (core revision 13) Broadcom 43xx driver loaded [ Features: P ] hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 1-2: new full-speed USB device number 2 using ohci_hcd ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' usb 3-1: new low-speed USB device number 2 using ohci_hcd Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input7 generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1/input0 usb 4-1: new full-speed USB device number 2 using ohci_hcd usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver btusb EXT4-fs (sda3): re-mounted. Opts: (null) tg3 0000:10:00.0: irq 43 for MSI/MSI-X b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) NET: Registered protocol family 17 [drm] Setting GART location based on new memory map [drm] Loading RS690/RS740 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs wlan0: authenticate with 00:21:91:82:3c:30 wlan0: send auth to 00:21:91:82:3c:30 (try 1/3) wlan0: authenticated wlan0: associate with 00:21:91:82:3c:30 (try 1/3) wlan0: RX AssocResp from 00:21:91:82:3c:30 (capab=0x411 status=0 aid=1) wlan0: associated EXT4-fs (sda3): re-mounted. Opts: commit=0 [drm] Num pipes: 1 > acpi_skip_timer_override in a 3rd test (and also using acpi=debug in > both cases) and provide dmesg output for those testruns. Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.0 (root@dos) (gcc version 4.6.3 (Gentoo 4.6.3 p1.0, pie-0.5.1) ) #2 SMP PREEMPT Thu May 24 22:49:31 OMST 2012 Command line: root=/dev/sda3 acpi=debug acpi_skip_timer_override BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable) BIOS-e820: 00000000b7fb0000 - 00000000b7fc8000 (reserved) BIOS-e820: 00000000b7fc8000 - 00000000b7fe7fb8 (ACPI NVS) BIOS-e820: 00000000b7fe7fb8 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Malformed early option 'acpi' NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6715b (GB833EA#ACB)/30C2, BIOS 68YTT Ver. F.0E 11/25/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-00000000b7fb0000 0000000000 - 00b7e00000 page 2M 00b7e00000 - 00b7fb0000 page 4k kernel direct mapping tables up to b7fb0000 @ 1fffb000-20000000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ b7faa000-b7fb0000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 00000000b7fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 00000000b7fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20120320/tbfadt-443) ACPI: DSDT 00000000b7fc84a4 11A38 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 00000000b7fe7d80 00040 ACPI: SLIC 00000000b7fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 00000000b7fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 00000000b7fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 00000000b7fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 00000000b7fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 00000000b7fd9edc 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 00000000b7fd9f35 00136 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000b7fb0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1015615 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3914 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 733168 pages, LIFO batch:31 Normal zone: 4096 pages used for memmap Normal zone: 258048 pages, LIFO batch:31 SB600 revision 0x14 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fc8000 PM: Registered nosave memory: 00000000b7fc8000 - 00000000b7fe7000 PM: Registered nosave memory: 00000000b7fe7000 - 00000000b7fe8000 PM: Registered nosave memory: 00000000b7fe8000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000 PM: Registered nosave memory: 00000000fec02000 - 00000000ffbc0000 PM: Registered nosave memory: 00000000ffbc0000 - 00000000ffcc0000 PM: Registered nosave memory: 00000000ffcc0000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88013fc00000 s71744 r8192 d22464 u1048576 pcpu-alloc: s71744 r8192 d22464 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995130 Kernel command line: root=/dev/sda3 acpi=debug acpi_skip_timer_override PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 28000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ ac000000 PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000 Memory: 3853536k/5242880k available (4382k kernel code, 1180420k absent, 208924k reserved, 1971k data, 432k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 2190.698 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 4381.39 BogoMIPS (lpj=2190698) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer tseg: 0000000000 mce: CPU supports 5 MCE banks LVT offset 0 assigned for vector 0xf9 using AMD E400 aware idle routine SMP alternatives: switching to UP code ACPI: Core revision 20120320 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: Mobile AMD Sempron(tm) Processor 3800+ stepping 02 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Brought up 1 CPUs Total of 1 processors activated (4381.39 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xb7fc8000-0xb7fe7fb7] (131000 bytes) NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, bfffffff] TOM2: 0000000140000000 aka 5120M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xc0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x140000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C231] (off) ACPI: Power Resource [C24D] (on) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: Power Resource [C399] (off) ACPI: Power Resource [C39A] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfedfffff] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000 pci 0000:00:01.0: [1002:7912] type 01 class 0x060400 pci 0000:00:04.0: [1002:7914] type 01 class 0x060400 pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:7915] type 01 class 0x060400 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: [1002:7916] type 01 class 0x060400 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xd0609000-0xd06093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xd0601000-0xd0601fff] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 pci 0000:00:13.1: reg 10: [mem 0xd0602000-0xd0602fff] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 pci 0000:00:13.2: reg 10: [mem 0xd0603000-0xd0603fff] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 pci 0000:00:13.3: reg 10: [mem 0xd0604000-0xd0604fff] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 pci 0000:00:13.4: reg 10: [mem 0xd0605000-0xd0605fff] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 pci 0000:00:13.5: reg 10: [mem 0xd0606000-0xd06060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 00 class 0x010182 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xd0608000-0xd060bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 pci 0000:01:05.0: [1002:791f] type 00 class 0x030000 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xd0400000-0xd040ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xd0500000-0xd05fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:10:00.0: [14e4:1693] type 00 class 0x020000 pci 0000:10:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] pci 0000:10:00.0: PME# supported from D3hot D3cold pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:30:00.0: [14e4:4312] type 00 class 0x028000 pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff 64bit] pci 0000:30:00.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: [1180:0476] type 02 class 0x060700 pci 0000:02:04.0: reg 10: [mem 0xd0100000-0xd0100fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.1: [1180:0832] type 00 class 0x0c0010 pci 0000:02:04.1: reg 10: [mem 0xd0101000-0xd01017ff] pci 0000:02:04.1: supports D1 D2 pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfedfffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xd0608000-0xd060bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd0609000-0xd06093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xc0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (disabled) pnp 00:03: [io 0x00f0-0x00ff] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: [io 0x0072-0x0073] pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x0023] pnp 00:09: [io 0x002e-0x002f] pnp 00:09: [io 0x004e-0x004f] pnp 00:09: [io 0x0092] pnp 00:09: [io 0x00b0-0x00b1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0500-0x053f] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cdf] pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0500-0x053f] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cdf] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: [mem 0xfff00000-0xffffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [irq 22] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0b: [io 0x8000-0x802f] pnp 00:0b: [io 0x8100-0x811f] pnp 00:0b: [mem 0xe0000000-0xefffffff] pnp 00:0b: [mem 0xfec00000-0xfec000ff] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] system 00:0b: [io 0x8000-0x802f] has been reserved system 00:0b: [io 0x8100-0x811f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x000cd400-0x000cffff] pnp 00:0c: [mem 0x00000000-0x07ffffff] pnp 00:0c: [mem 0xfee00000-0xfee00fff] system 00:0c: [mem 0x000cd400-0x000cffff] has been reserved system 00:0c: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:00:14.4: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000 pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000 pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 pci 0000:00:14.4: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0xc8100000-0xc8103fff 64bit] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff] pci 0000:02:04.0: BAR 13: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 14: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: bridge window [mem 0xd8000000-0xdbffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd05fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd00fffff] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd03fffff] pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ ac000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1337877262.453:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7655 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 40 for MSI/MSI-X pcieport 0000:00:05.0: irq 41 for MSI/MSI-X pcieport 0000:00:06.0: irq 42 for MSI/MSI-X ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C1F0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: Fan [C39D] (off) ACPI: Fan [C39E] (off) acpi device:02: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3 ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (67 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ2] (51 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ3] (31 C) Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@...0609000 port 0xd0609100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 i8042: PNP: PS/2 Controller [PNP0303:C24A,PNP0f13:C24B] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 TCP: cubic registered ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) ata5.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 ata5.00: configured for MWDMA2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST9120822AS, 3.BHE, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.BH PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 registered taskstats version 1 powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3800+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0xe (2200 MHz), vid 0xd powernow-k8: fid 0xc (2000 MHz), vid 0xf powernow-k8: fid 0xa (1800 MHz), vid 0x11 powernow-k8: fid 0x8 (1600 MHz), vid 0x13 powernow-k8: fid 0x0 (800 MHz), vid 0x18 EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 432k freed NET: Registered protocol family 1 udevd[810]: starting version 182 hp_accel: hardware type NC6715x found lis3lv02d: 12 bits sensor found microcode: AMD CPU family 0xf not supported input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 Registered led device: hp::hddprotect hp_accel: driver loaded k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 ssb: Found chip with id 0x4311, rev 0x02 and package 0x00 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 cfg80211: Calling CRDA to update world regulatory domain b43-phy0: Broadcom 4311 WLAN found (core revision 13) Broadcom 43xx driver loaded [ Features: P ] tg3.c:v3.123 (March 21, 2012) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1a:4b:76:46:6e tg3 0000:10:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:10:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 hda-codec: No codec parser is available ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000 hub 1-0:1.0: unable to enumerate USB device on port 5 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 2-2: new full-speed USB device number 2 using ohci_hcd Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized usb 3-1: new low-speed USB device number 2 using ohci_hcd usbcore: registered new interface driver btusb input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input7 generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 4-1: new full-speed USB device number 2 using ohci_hcd EXT4-fs (sda3): re-mounted. Opts: (null) tg3 0000:10:00.0: irq 43 for MSI/MSI-X b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) NET: Registered protocol family 17 [drm] Setting GART location based on new memory map [drm] Loading RS690/RS740 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs wlan0: authenticate with 00:21:91:82:3c:30 wlan0: direct probe to 00:21:91:82:3c:30 (try 1/3) wlan0: send auth to 00:21:91:82:3c:30 (try 2/3) wlan0: authenticated wlan0: associate with 00:21:91:82:3c:30 (try 1/3) wlan0: RX AssocResp from 00:21:91:82:3c:30 (capab=0x411 status=0 aid=1) wlan0: associated EXT4-fs (sda3): re-mounted. Opts: commit=0 [drm] Num pipes: 1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists