| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 29 Jun 2012 12:33:52 -0300
From: Sebastian Benvenuti <sebastianbenvenuti@...il.com>
To: abbotti@....co.uk
Cc: fmhess@...rs.sourceforge.net, gregkh@...uxfoundation.org,
linux-kernel@...r.kernel.org,
Sebastian Benvenuti <sebastianbenvenuti@...il.com>
Subject: [PATCH 4/4] Staging: comedi: ssv_dnp: Syntax issues fixed
Changed "printk(KERN_X" to "pr_x(" and line lenght issues
Signed-off-by: Sebastian Benvenuti <sebastianbenvenuti@...il.com>
---
drivers/staging/comedi/drivers/s526.c | 40 +++++++++++++++++------------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index 7a56434..c3abe82 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -241,7 +241,7 @@ static int s526_gpct_rinsn(struct comedi_device *dev,
/* Check if (n > 0) */
if (insn->n <= 0) {
- printk(KERN_ERR "s526: INSN_READ: n should be > 0\n");
+ pr_err("s526: INSN_READ: n should be > 0\n");
return -EINVAL;
}
/* Read the low word first */
@@ -284,7 +284,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
data[2]: Pre-load Register Value
data[3]: Conter Control Register
*/
- printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring Encoder\n");
+ pr_info("s526: GPCT_INSN_CONFIG: Configuring Encoder\n");
devpriv->s526_gpct_config[subdev_channel].app =
PositionMeasurement;
@@ -391,7 +391,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
data[3]: Pre-load Register 1 Value
data[4]: Conter Control Register
*/
- printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring SPG\n");
+ pr_info("s526: GPCT_INSN_CONFIG: Configuring SPG\n");
devpriv->s526_gpct_config[subdev_channel].app =
SinglePulseGeneration;
@@ -436,7 +436,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
data[3]: Pre-load Register 1 Value
data[4]: Conter Control Register
*/
- printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring PTG\n");
+ pr_info("s526: GPCT_INSN_CONFIG: Configuring PTG\n");
devpriv->s526_gpct_config[subdev_channel].app =
PulseTrainGeneration;
@@ -474,7 +474,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
break;
default:
- printk(KERN_ERR "s526: unsupported GPCT_insn_config\n");
+ pr_err("s526: unsupported GPCT_insn_config\n");
return -EINVAL;
break;
}
@@ -490,21 +490,21 @@ static int s526_gpct_winsn(struct comedi_device *dev,
short value;
union cmReg cmReg;
- printk(KERN_INFO "s526: GPCT_INSN_WRITE on channel %d\n",
+ pr_info("s526: GPCT_INSN_WRITE on channel %d\n",
subdev_channel);
cmReg.value = inw(ADDR_CHAN_REG(REG_C0M, subdev_channel));
- printk(KERN_INFO "s526: Counter Mode Register: %x\n", cmReg.value);
+ pr_info("s526: Counter Mode Register: %x\n", cmReg.value);
/* Check what Application of Counter this channel is configured for */
switch (devpriv->s526_gpct_config[subdev_channel].app) {
case PositionMeasurement:
- printk(KERN_INFO "S526: INSN_WRITE: PM\n");
+ pr_info("S526: INSN_WRITE: PM\n");
outw(0xFFFF & ((*data) >> 16), ADDR_CHAN_REG(REG_C0H,
subdev_channel));
outw(0xFFFF & (*data), ADDR_CHAN_REG(REG_C0L, subdev_channel));
break;
case SinglePulseGeneration:
- printk(KERN_INFO "S526: INSN_WRITE: SPG\n");
+ pr_info("S526: INSN_WRITE: SPG\n");
outw(0xFFFF & ((*data) >> 16), ADDR_CHAN_REG(REG_C0H,
subdev_channel));
outw(0xFFFF & (*data), ADDR_CHAN_REG(REG_C0L, subdev_channel));
@@ -517,14 +517,14 @@ static int s526_gpct_winsn(struct comedi_device *dev,
The above periods must be expressed as a multiple of the
pulse frequency on the selected source
*/
- printk(KERN_INFO "S526: INSN_WRITE: PTG\n");
+ pr_info("S526: INSN_WRITE: PTG\n");
if ((insn->data[1] > insn->data[0]) && (insn->data[0] > 0)) {
(devpriv->s526_gpct_config[subdev_channel]).data[0] =
insn->data[0];
(devpriv->s526_gpct_config[subdev_channel]).data[1] =
insn->data[1];
} else {
- printk(KERN_ERR "s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n",
+ pr_err("s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n",
insn->data[0], insn->data[1]);
return -EINVAL;
}
@@ -613,7 +613,7 @@ static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
if (i == TIMEOUT) {
/* printk() should be used instead of printk()
* whenever the code can be called from real-time. */
- printk(KERN_ERR "s526: ADC(0x%04x) timeout\n",
+ pr_err("s526: ADC(0x%04x) timeout\n",
inw(ADDR_REG(REG_ISR)));
return -ETIMEDOUT;
}
@@ -712,7 +712,7 @@ static int s526_dio_insn_config(struct comedi_device *dev,
int chan = CR_CHAN(insn->chanspec);
int group, mask;
- printk(KERN_INFO "S526 DIO insn_config\n");
+ pr_info("S526 DIO insn_config\n");
/* The input or output configuration of each digital line is
* configured by a special insn_config instruction. chanspec
@@ -751,7 +751,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* int subdev_channel = 0; */
union cmReg cmReg;
- printk(KERN_INFO "comedi%d: s526: ", dev->minor);
+ pr_info("comedi%d: s526: ", dev->minor);
iobase = it->options[0];
if (!iobase || !request_region(iobase, S526_IOSIZE, thisboard->name)) {
@@ -850,7 +850,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
s->type = COMEDI_SUBD_UNUSED;
}
- printk(KERN_INFO "attached\n");
+ pr_info("attached\n");
return 1;
@@ -897,11 +897,11 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
cmReg.reg.reserved = 0;
n = 0;
- printk(KERN_INFO "Mode reg=0x%04x, 0x%04lx\n",
+ pr_info("Mode reg=0x%04x, 0x%04lx\n",
cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
udelay(1000);
- printk(KERN_INFO "Read back mode reg=0x%04x\n",
+ pr_info("Read back mode reg=0x%04x\n",
inw(ADDR_CHAN_REG(REG_C0M, n)));
/* Load the pre-load register high word */
@@ -925,14 +925,14 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
udelay(1000);
- printk(KERN_INFO "Read back mode reg=0x%04x\n",
+ pr_info("Read back mode reg=0x%04x\n",
inw(ADDR_CHAN_REG(REG_C0M, n)));
#endif
- printk(KERN_INFO "Current registres:\n");
+ pr_info("Current registres:\n");
for (i = 0; i < S526_NUM_PORTS; i++) {
- printk(KERN_INFO "0x%02lx: 0x%04x\n",
+ pr_info("0x%02lx: 0x%04x\n",
ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i])));
}
return 1;
--
1.7.11.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists