| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 10 Jul 2012 17:13:54 -0700
From: H Hartley Sweeten <hartleys@...ionengravers.com>
To: Linux Kernel <linux-kernel@...r.kernel.org>
CC: <devel@...verdev.osuosl.org>, <abbotti@....co.uk>,
<gregkh@...uxfoundation.org>
Subject: [PATCH 63/83] staging: comedi: rtd520: remove RtdPlxInterruptWrite macro
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writel'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@...ionengravers.com>
Cc: Ian Abbott <abbotti@....co.uk>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/staging/comedi/drivers/rtd520.c | 41 +++++++++++++++------------------
1 file changed, 18 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 486a7fc..202e1d8 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -406,10 +406,6 @@ struct rtdPrivate {
/* Macros to access registers */
-/* PLX9080 interrupt mask and status */
-#define RtdPlxInterruptWrite(dev, v) \
- writel(v, devpriv->lcfg+LCFG_ITCSR)
-
/* Set mode for DMA 0 */
#define RtdDma0Mode(dev, m) \
writel((m), devpriv->lcfg+LCFG_DMAMODE0)
@@ -1008,8 +1004,8 @@ transferDone:
writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
#ifdef USE_DMA
if (devpriv->flags & DMA0_ACTIVE) {
- RtdPlxInterruptWrite(dev,
- readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E);
+ writel(readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E,
+ devpriv->lcfg + LCFG_ITCSR);
abort_dma(dev, 0);
devpriv->flags &= ~DMA0_ACTIVE;
/* if Using DMA, then we should have read everything by now */
@@ -1279,8 +1275,8 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
#ifdef USE_DMA
if (devpriv->flags & DMA0_ACTIVE) { /* cancel anything running */
- RtdPlxInterruptWrite(dev,
- readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E);
+ writel(readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E,
+ devpriv->lcfg + LCFG_ITCSR);
abort_dma(dev, 0);
devpriv->flags &= ~DMA0_ACTIVE;
if (readl(devpriv->lcfg + LCFG_ITCSR) & ICS_DMA0_A)
@@ -1446,8 +1442,8 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
RtdDma0Next(dev, /* point to first block */
devpriv->dma0Chain[DMA_CHAIN_COUNT - 1].next);
writel(DMAS_ADFIFO_HALF_FULL, devpriv->las0 + LAS0_DMA0_SRC);
- RtdPlxInterruptWrite(dev,
- readl(devpriv->lcfg + LCFG_ITCSR) | ICS_DMA0_E);
+ writel(readl(devpriv->lcfg + LCFG_ITCSR) | ICS_DMA0_E,
+ devpriv->lcfg + LCFG_ITCSR);
/* Must be 2 steps. See PLX app note about "Starting a DMA transfer" */
RtdDma0Control(dev, PLX_DMA_EN_BIT); /* enable DMA (clear INTR?) */
RtdDma0Control(dev, PLX_DMA_EN_BIT | PLX_DMA_START_BIT); /*start DMA */
@@ -1482,8 +1478,8 @@ static int rtd_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->aiCount = 0; /* stop and don't transfer any more */
#ifdef USE_DMA
if (devpriv->flags & DMA0_ACTIVE) {
- RtdPlxInterruptWrite(dev,
- readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E);
+ writel(readl(devpriv->lcfg + LCFG_ITCSR) & ~ICS_DMA0_E,
+ devpriv->lcfg + LCFG_ITCSR);
abort_dma(dev, 0);
devpriv->flags &= ~DMA0_ACTIVE;
}
@@ -1832,7 +1828,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* also, initialize shadow registers */
writel(0, devpriv->las0 + LAS0_BOARD_RESET);
udelay(100); /* needed? */
- RtdPlxInterruptWrite(dev, 0);
+ writel(0, devpriv->lcfg + LCFG_ITCSR);
devpriv->intMask = 0;
writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
devpriv->intClearMask = ~0;
@@ -1947,9 +1943,8 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
}
#endif /* USE_DMA */
- if (dev->irq) { /* enable plx9080 interrupts */
- RtdPlxInterruptWrite(dev, ICS_PIE | ICS_PLIE);
- }
+ if (dev->irq)
+ writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + LCFG_ITCSR);
printk("\ncomedi%d: rtd520 driver attached.\n", dev->minor);
@@ -1979,9 +1974,9 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
#endif /* USE_DMA */
/* subdevices and priv are freed by the core */
if (dev->irq) {
- RtdPlxInterruptWrite(dev,
- readl(devpriv->lcfg + LCFG_ITCSR) &
- ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E));
+ writel(readl(devpriv->lcfg + LCFG_ITCSR) &
+ ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E),
+ devpriv->lcfg + LCFG_ITCSR);
free_irq(dev->irq, dev);
}
@@ -2014,7 +2009,7 @@ static void rtd_detach(struct comedi_device *dev)
if (devpriv->lcfg) {
RtdDma0Control(dev, 0); /* disable DMA */
RtdDma1Control(dev, 0); /* disable DMA */
- RtdPlxInterruptWrite(dev, ICS_PIE | ICS_PLIE);
+ writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + LCFG_ITCSR);
}
#endif /* USE_DMA */
if (devpriv->las0) {
@@ -2048,9 +2043,9 @@ static void rtd_detach(struct comedi_device *dev)
}
#endif /* USE_DMA */
if (dev->irq) {
- RtdPlxInterruptWrite(dev,
- readl(devpriv->lcfg + LCFG_ITCSR) &
- ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E));
+ writel(readl(devpriv->lcfg + LCFG_ITCSR) &
+ ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E),
+ devpriv->lcfg + LCFG_ITCSR);
free_irq(dev->irq, dev);
}
if (devpriv->las0)
--
1.7.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists