lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Tue, 17 Jul 2012 10:43:54 +0000
From:	"Hadli, Manjunath" <manjunath.hadli@...com>
To:	Laurent Pinchart <laurent.pinchart@...asonboard.com>,
	"davinci-linux-open-source@...ux.davincidsp.com" 
	<davinci-linux-open-source@...ux.davincidsp.com>
CC:	LMML <linux-media@...r.kernel.org>,
	"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	Rob Landley <rob@...dley.net>,
	Mauro Carvalho Chehab <mchehab@...radead.org>
Subject: RE: [PATCH] [media] davinci: vpfe: Add documentation

Hi Laurent,
  Thank you for your comments. 
 
On Sun, Jul 15, 2012 at 18:16:25, Laurent Pinchart wrote:
> Hi Manjunath,
> 
> Thanks for the patch.
> 
> On Wednesday 11 July 2012 21:09:26 Manjunath Hadli wrote:
> > Add documentation on the Davinci VPFE driver. Document the subdevs,
> > and private IOTCLs the driver implements
> > 
> > Signed-off-by: Manjunath Hadli <manjunath.hadli@...com>
> > Signed-off-by: Lad, Prabhakar <prabhakar.lad@...com>
> > ---
> >  Documentation/video4linux/davinci-vpfe-mc.txt |  263
> > +++++++++++++++++++++++++ 1 files changed, 263 insertions(+), 0
> > deletions(-)
> >  create mode 100644 Documentation/video4linux/davinci-vpfe-mc.txt
> > 
> > diff --git a/Documentation/video4linux/davinci-vpfe-mc.txt
> > b/Documentation/video4linux/davinci-vpfe-mc.txt new file mode 100644
> > index 0000000..968194f
> > --- /dev/null
> > +++ b/Documentation/video4linux/davinci-vpfe-mc.txt
> > @@ -0,0 +1,263 @@
> > +Davinci Video processing Front End (VPFE) driver
> > +
> > +Copyright (C) 2012 Texas Instruments Inc
> > +
> > +Contacts: Manjunath Hadli <manjunath.hadli@...com>
> > +
> > +Introduction
> > +============
> > +
> > +This file documents the Texas Instruments Davinci Video processing Front
> > End
> > +(VPFE) driver located under drivers/media/video/davinci. The original
> > driver
> > +exists for Davinci VPFE, which is now being changed to Media Controller
> > +Framework.
> > +
> > +Currently the driver has been successfully used on the following version of
> > Davinci:
> > +
> > +	DM365/DM368
> 
> Does the driver still support the DM644x ?

Yes. The driver supports DM6446. We will add the Dm6446x patches on these.

> 
> > +The driver implements V4L2, Media controller and v4l2_subdev interfaces.
> > +Sensor, lens and flash drivers using the v4l2_subdev interface in the
> > kernel
> > +are supported.
> > +
> > +
> > +Split to subdevs
> > +================
> > +
> > +The Davinic VPFE is split into V4L2 subdevs, each of the blocks inside the
> 
> s/Davinic/Davinci/
OK. Thanks.

> 
> > VPFE
> > +having one subdev to represent it. Each of the subdevs provide a V4L2
> > subdev
> > +interface to userspace.
> > +
> > +	DAVINCI CCDC
> > +	DAVINCI PREVIEWER
> > +	DAVINCI RESIZER
> 
> the DM36x VPFE documentation doesn't split the hardware in CCDC, PREVIEWER and 
> RESIZER modules, but in ISIF, IPIPEIF and IPIPE. Why don't you use those names 
> ? It looks like you're introducing an abstraction layer on top of the existing 
> driver. Why is that needed, why don't you just port the driver to the MC API 
> instead ?
Please see below my comment for "enumerating internal modules".
> 
> > +	DAVINCI AEW
> > +	DAVINCI AF
> > +
> > +Each possible link in the VPFE is modeled by a link in the Media controller
> > +interface. For an example program see [1].
> > +
> > +
> > +Private IOCTLs
> > +==============
> > +
> > +The Davinci Video processing Front End (VPFE) driver supports standard V4L2
> > +IOCTLs and controls where possible and practical. Much of the functions
> > provided
> > +by the VPFE, however, does not fall under the standard IOCTLs.
> > +
> > +In general, there is a private ioctl for configuring each of the blocks
> > +containing hardware-dependent functions.
> > +
> > +The following private IOCTLs are supported:
> > +
> > +1: IOCTL: PREV_S_PARAM/PREV_G_PARAM
> > +Description:
> > +	Sets/Gets the parameters required by the previewer module
> > +Parameter:
> > +	/**
> > +	 * struct prev_module_param- structure to configure preview modules
> > +	 * @version: Version of the preview module
> 
> Who is responsible for filling this field, the application or the driver ?
The application is responsible for filling this info. He would enumerate the
capabilities first and  set them using S_PARAM/G_PARAM.

> 
> > +	 * @len: Length of the module config structure
> > +	 * @module_id: Module id
> > +	 * @param: pointer to module config parameter.
> 
> What is module_id for ? What does param point to ?
There are a lot of tiny modules in the previewer/resizer which are enumerated 
as individual modules. The param points to the parameter set that the module
expects to be set.

> 
> > +	 */
> > +	struct prev_module_param {
> > +		char version[IMP_MAX_NAME_SIZE];
> 
> Is there a need to express the version as a string instead of an integer ?
It could be integer. It is generally a fixed point num, and easy to read it
as a string than an integer. Can I keep it as a string?

> 
> > +		unsigned short len;
> > +		unsigned short module_id;
> > +		void *param;
> > +	};
> > +
> > +2: IOCTL: PREV_S_CONFIG/PREV_G_CONFIG
> > +Description:
> > +	Sets/Gets the configuration required by the previewer channel
> > +Parameter:
> > +	/**
> > +	 * struct prev_channel_config - structure for configuring the previewer
> > channel
> > +	 * @len: Length of the user configuration
> > +	 * @config: pointer to either single shot config or continuous
> > +	 */
> > +	struct prev_channel_config {
> > +		unsigned short len;
> > +		void *config;
> > +	};
> 
> What's the difference between parameters and configuration ? What does config 
> point to ?
Config is setting which is required for a subdev to function based on what it is
set for (single shot/continuous.) common to all platforms. Parameters are the
settings for individual small sub-ips which might be slightly different from one
platform to another. Config points to prev_single_shot_config or  prev_continuous_config
currently defined in linux/dm3656ipipe.h. I think we will move it to a common location.

> 
> > +
> > +3: IOCTL: PREV_ENUM_CAP
> > +Description:
> > +	Queries the modules available in the image processor for preview the
> > +	input image.
> > +Parameter:
> > +	/**
> > +	 * struct prev_cap - structure to enumerate capabilities of previewer
> > +	 * @index: application use this to iterate over the available modules
> > +	 * @version: version of the preview module
> > +	 * @module_id: module id
> > +	 * @control: control operation allowed in continuous mode? 1 - allowed, 0
> > - not allowed
> > +	 * @path: path on which the module is sitting
> > +	 * @module_name: module name
> > +	 */
> > +	struct prev_cap {
> > +		unsigned short index;
> > +		char version[IMP_MAX_NAME_SIZE];
> > +		unsigned short module_id;
> > +		char control;
> > +		enum imp_data_paths path;
> > +		char module_name[IMP_MAX_NAME_SIZE];
> > +	};
> 
> Enumerating internal modules is exactly what the MC API was designed for. Why 
> do you reimplement that using private ioctls ?
The number of these sub-Ips are quite a few in DM365 and Dm355, having a lot of them 
In a way that may be bewildering to the end-user to be able to connect them quickly and properly.
But overall, these are nothing but exposed subips of what we call as CCDC,Previewer  and Resizer.It
Made a lot of logical sense to keep it that way, give a default configuration for everything, and if
at all the user wants the fine grain config control, be able to give (mainly for the configurations- 
not so much for connections). In most of the cases the param IOTCLs are only used for fine-tuning the image and not expected to be used as a regular flow of a normal application. I do not think there could be any justification for making all these nitty gritty which keep changing for each IPs as part of regular V4L2 IOCTLs. In future, if there is a common theme that emerges, we could definitely relook into this.
> 
> > +
> > +4: IOCTL: RSZ_S_CONFIG/RSZ_G_CONFIG
> > +Description:
> > +	Sets/Gets the configuration required by the resizer channel
> > +Parameter:
> > +	/**
> > +	 * struct rsz_channel_config - structure for configuring the resizer
> > channel +	 * @chain: chain this resizer at the previewer output
> > +	 * @len: length of the user configuration
> > +	 * @config: pointer to either single shot config or continuous
> > +	 */
> > +	struct rsz_channel_config {
> > +		unsigned char chain;
> > +		unsigned short len;
> > +		void *config;
> > +	};
> 
> Same question as for the preview engine, what does this do, what does config 
> point to ? What is the chain parameter for ?
Config points to rsz_single_shot_config and rsz_continuous_config defined in dm365ipipe.h As mentioned earlier, we could move the definition to a common header. 
The chain param is to indicate if resizer and previewer are chained. We will remove this.
> 
> > +
> > +5: IOCTL: VPFE_CMD_S_CCDC_RAW_PARAMS/VPFE_CMD_G_CCDC_RAW_PARAMS
> > +Description:
> > +	Sets/Gets the CCDC parameter
> > +Parameter:
> > +	/**
> > +	 * struct ccdc_config_params_raw - structure for configuring ccdc params
> > +	 * @linearize: linearization parameters for image sensor data input
> > +	 * @df_csc: data formatter or CSC
> > +	 * @dfc: defect Pixel Correction (DFC) configuration
> > +	 * @bclamp: Black/Digital Clamp configuration
> > +	 * @gain_offset: Gain, offset adjustments
> 
> Can't you use subdev V4L2 controls for gains ?
In that case only gain has to be taken out as a generic IOCTL. Since that is is 
The parameter which could be taken out of this big structure
> 
> > +	 * @culling: Culling
> > +	 * @pred: predictor for DPCM compression
> > +	 * @horz_offset: horizontal offset for Gain/LSC/DFC
> > +	 * @vert_offset: vertical offset for Gain/LSC/DFC
> > +	 * @col_pat_field0: color pattern for field 0
> > +	 * @col_pat_field1: color pattern for field 1
> 
> Shouldn't color patterns be computed automatically by the driver based on the 
> media bus pixel code ?
OK.
> 
> > +	 * @data_size: data size from 8 to 16 bits
> > +	 * @data_shift: data shift applied before storing to SDRAM
> 
> Ditto, this should probably be computed automatically.
Do you want to define new MBUS formats for these?
> 
> > +	 * @test_pat_gen: enable input test pattern generation
> 
> You could use a subdev V4L2 control for that.
Ok.
> 
> > +	 */
> > +	struct ccdc_config_params_raw {
> > +		struct ccdc_linearize linearize;
> > +		struct ccdc_df_csc df_csc;
> > +		struct ccdc_dfc dfc;
> > +		struct ccdc_black_clamp bclamp;
> > +		struct ccdc_gain_offsets_adj gain_offset;
> > +		struct ccdc_cul culling;
> > +		enum ccdc_dpcm_predictor pred;
> > +		unsigned short horz_offset;
> > +		unsigned short vert_offset;
> > +		struct ccdc_col_pat col_pat_field0;
> > +		struct ccdc_col_pat col_pat_field1;
> > +		enum ccdc_data_size data_size;
> > +		enum ccdc_datasft data_shift;
> > +		unsigned char test_pat_gen;
> > +	};
> > +
> > +6: IOCTL: AF_S_PARAM/AF_G_PARAM
> > +Description:
> > +	AF_S_PARAM performs the hardware setup and sets the parameter for
> > +	AF engine.AF_G_PARAM gets the parameter setup in AF engine
> > +Parameter:
> > +	/**
> > +	 * struct af_configuration - struct to configure parameters of AF engine
> > +	 * @alaw_enable: ALAW status
> > +	 * @fv_sel: focus value selection
> > +	 * @hmf_config: HMF configurations
> > +	 * @rgb_pos: RGB Positions. Only applicable with AF_HFV_ONLY selection
> > +	 * @iir_config: IIR filter configurations
> > +	 * @fir_config: FIR filter configuration
> > +	 * @paxel_config: Paxel parameters
> > +	 * @mode: accumulator mode
> > +	 */
> > +	struct af_configuration {
> > +		enum af_enable_flag alaw_enable;
> 
> Can this be computed automatically based on the media bus pixel code ? 
Ok. Sure.
> 
> > +		enum af_focus_val_sel fv_sel;
> > +		struct af_hmf hmf_config;
> > +		enum rgbpos rgb_pos;
> 
> Same here ?
New MBUS formats here as well?
> 
> > +		struct af_iir iir_config;
> > +		struct af_fir fir_config;
> > +		struct af_paxel paxel_config;
> > +		enum af_mode mode;
> > +	};
> > +
> > +7: IOCTL: AF_GET_STAT
> > +Description:
> > +	Copy the entire statistics located in application buffer
> > +	to user space from the AF engine
> > +Parameter:
> > +	/**
> > +	 * struct af_statdata - structure to get statistics from AF engine
> > +	 * @buffer: pointer to buffer
> > +	 * @buf_length: length of buffer
> > +	 */
> > +	struct af_statdata {
> > +		void *buffer;
> > +		int buf_length;
> > +	};
> 
> The OMAP3 ISP driver also needs to export statistics data to userspace. We 
> should design a common API here.
 Sure we can take it up sometime later.
> 
> > +8: IOCTL: AEW_S_PARAM/AEW_G_PARAM
> > +Description:
> > +	AEW_S_PARAM performs the hardware setup and sets the parameter for
> > +	AEW engine.AEW_G_PARAM gets the parameter setup in AEW engine
> > +Parameter:
> > +	/**
> > +	 * struct aew_configuration -  struct to configure parameters of AEW
> > engine
> > +	 * @alaw_enable: A-law status
> > +	 * @format: AE/AWB output format
> > +	 * @sum_shift: AW/AWB right shift value for sum of pixels
> > +	 * @saturation_limit: Saturation Limit
> > +	 * @hmf_config: HMF configurations
> > +	 * @window_config: Window for AEW Engine
> > +	 * @blackwindow_config: Black Window
> > +	 */
> > +	struct aew_configuration {
> > +		enum aew_enable_flag alaw_enable;
> 
> Computed automatically as well ?
OK.
> 
> > +		enum aew_output_format out_format;
> > +		char sum_shift;
> > +		int saturation_limit;
> > +		struct aew_hmf hmf_config;
> > +		struct aew_window window_config;
> > +		struct aew_black_window blackwindow_config;
> > +	};
> > +
> > +9: IOCTL: AEW_GET_STAT
> > +Description:
> > +	Copy the entire statistics located in application buffer
> > +	to user space from the AEW engine
> > +Parameter:
> > +	/**
> > +	 * struct aew_statdata - structure to get statistics from AEW engine
> > +	 * @buffer: pointer to buffer
> > +	 * @buf_length: length of buffer
> > +	 */
> > +	struct aew_statdata {
> > +		void *buffer;
> > +		int buf_length;
> > +	};
> 
> Same comment as for AF_GET_STAT.
Yes, we can discuss about it to make it common. I would prefer we get this driver in and make amends when you are doing it for OMAP.
> 
> > +Technical reference manuals (TRMs) and other documentation
> > +==========================================================
> > +
> > +Davinci DM365 TRM:
> > +<URL:http://www.ti.com/lit/ds/sprs457e/sprs457e.pdf>
> > +Referenced MARCH 2009-REVISED JUNE 2011
> > +
> > +Davinci DM368 TRM:
> > +<URL:http://www.ti.com/lit/ds/sprs668c/sprs668c.pdf>
> > +Referenced APRIL 2010-REVISED JUNE 2011
> > +
> > +Davinci Video Processing Front End (VPFE) DM36x
> > +<URL:http://www.ti.com/lit/ug/sprufg8c/sprufg8c.pdf>
> > +
> > +
> > +References
> > +==========
> > +
> > +[1] http://git.ideasonboard.org/?p=media-ctl.git;a=summary
> 
> -- 
> Regards,
> 
> Laurent Pinchart
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ