| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 25 Jul 2012 15:57:46 +0200
From: Daniel Mack <zonque@...il.com>
To: Daniel Mack <zonque@...il.com>
CC: linux-kernel@...r.kernel.org, eric.piel@...mplin-utc.net,
grant.likely@...retlab.ca, rob.herring@...xeda.com
Subject: Re: [PATCH v2 1/2] lis3: add generic DT matching code
On 25.07.2012 14:45, Daniel Mack wrote:
> This patch adds logic to parse lis3 properties from a device tree node
> and store them in a freshly allocated lis3lv02d_platform_data.
>
> Note that the actual match tables are left out here. This part should
> happen in the drivers that bind to the individual busses (SPI/I2C/PCI).
>
> Also adds some DT bindinds documentation.
>
> Signed-off-by: Daniel Mack <zonque@...il.com>
> ---
>
> v2 of this patch adds some documentation as well, and while writing it,
> I found two minor copy'n paste issues that I also fixed.
>
> Documentation/devicetree/bindings/misc/lis302.txt | 74 +++++++++++
> drivers/misc/lis3lv02d/lis3lv02d.c | 137 +++++++++++++++++++++
> drivers/misc/lis3lv02d/lis3lv02d.h | 4 +
> 3 files changed, 215 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/misc/lis302.txt
>
> diff --git a/Documentation/devicetree/bindings/misc/lis302.txt b/Documentation/devicetree/bindings/misc/lis302.txt
> new file mode 100644
> index 0000000..66230fd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/lis302.txt
> @@ -0,0 +1,74 @@
> +LIS302 accelerometer devicetree bindings
> +
> +This device is matched via its bus drivers, and has a number of properties
> +that apply in on the generic device (independent from the bus).
> +
> +
> +Required properties for the SPI bindings:
> + - compatible: should be set to "st,lis3lv02d_spi"
> + - reg: the chipselect index
> + - spi-max-frequency: maximal bus speed, should be set to 1000000 unless
> + constrained by external circuitry
> + - interrupts: the interrupt generated by the device
> +
> +
> +Optional properties for all bus drivers:
> +
> + - st,click-single-{x,y,z}: if present, tells the device to issue an
> + interrupt on single click events on the
> + x/y/z axis.
> + - st,click-double-{x,y,z}: if present, tells the device to issue an
> + interrupt on double click events on the
> + x/y/z axis.
> + - st,click-thresh-{x,y,z}: set the x/y/z axis threshold
> + - st,click-click-time-limit: click time limit, from 0 to 127.5msec
> + with step of 0.5 msec
> + - st,click-latency: click latency, from 0 to 255 msec with
> + step of 1 msec.
> + - st,click-window: click window, from 0 to 255 msec with
> + step of 1 msec.
> + - st,irq{1,2}-disable: disable IRQ 1/2
> + - st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition
> + - st,irq{1,2}-ff-wu-2: raise IRQ 1/2 on FF_WU_2 condition
> + - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready contition
> + - st,irq{1,2}-click: raise IRQ 1/2 on click condition
> + - st,irq-open-drain: consider IRQ lines open-drain
> + - st,irq-active-low: make IRQ lines active low
> + - st,wu-duration-1: duration register for Free-Fall/Wake-Up
> + interrupt 1
> + - st,wu-duration-2: duration register for Free-Fall/Wake-Up
> + interrupt 2
> + - st,wakeup-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for
> + upper/lower limit
> + - st,highpass-cutoff-hz=: 1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of
> + highpass cut-off frequency
> + - st,hipass{1,2}-disable: disable highpass 1/2.
> + - st,default-rate=: set the default rate
> + - st,axis-{x,y,z}=: set the axis to map to the three coordinates
> +
> +
> +Example for a SPI device node:
> +
> + lis302@0 {
> + compatible = "st,lis302dl-spi";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + interrupt-parent = <&gpio>;
> + interrupts = <104 0>;
> +
> + st,click-single-x;
> + st,click-single-y;
> + st,click-single-z;
> + st,click-thresh-x = <10>;
> + st,click-thresh-y = <10>;
> + st,click-thresh-z = <10>;
> + st,irq1-click;
> + st,irq2-click;
> + st,wakeup-x-lo;
> + st,wakeup-x-hi;
> + st,wakeup-y-lo;
> + st,wakeup-y-hi;
> + st,wakeup-z-lo;
> + st,wakeup-z-hi;
> + };
> +
> diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
> index a981e2a..22f7d65 100644
> --- a/drivers/misc/lis3lv02d/lis3lv02d.c
> +++ b/drivers/misc/lis3lv02d/lis3lv02d.c
> @@ -39,6 +39,7 @@
> #include <linux/miscdevice.h>
> #include <linux/pm_runtime.h>
> #include <linux/atomic.h>
> +#include <linux/of_device.h>
> #include "lis3lv02d.h"
>
> #define DRIVER_NAME "lis3lv02d"
> @@ -912,6 +913,138 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *lis3,
> }
> }
>
> +#ifdef CONFIG_OF
> +static int lis3lv02d_init_dt(struct lis3lv02d *lis3)
> +{
> + struct lis3lv02d_platform_data *pdata;
> + struct device_node *np = lis3->of_node;
> + u32 tmp;
> +
> + if (!lis3->of_node)
> + return 0;
> +
> + pdata = kzalloc(sizeof(*lis3->pdata), GFP_KERNEL);
> + if (!lis3->pdata)
> + return -ENOMEM;
Sorry, another one slipped through. That should read:
pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
if (!pdata)
...
That mistake was due to a faulty rebase/squash. If you want, I can
resend it, but I'd wait for some feedback first.
Daniel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists