[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.0-rc2-01612-g595b3f3 (kbuild@snb) (gcc version 4.7.1 (Debian 4.7.1-6) ) #292 SMP Wed Aug 22 18:14:53 CST 2012 [ 0.000000] Command line: trinity=2m hung_task_panic=1 branch=tip/master log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=vmlinuz-2012-08-22-18-15-35-tip:master:595b3f3-595b3f3-x86_64-randconfig-s153-4-fat BOOT_IMAGE=kernel-tests/kernels/x86_64-randconfig-s153/595b3f3/vmlinuz-3.6.0-rc2-01612-g595b3f3 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000093bff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000093c00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdab0-0x000fdabf] mapped at [ffff8800000fdab0] [ 0.000000] mpc: fdac0-fdbe4 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff88000008d000] 8d000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x0fffdfff] [ 0.000000] [mem 0x00000000-0x0fdfffff] page 2M [ 0.000000] [mem 0x0fe00000-0x0fffdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0xfffdfff @ [mem 0x0e854000-0x0e8d5fff] [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 128020(97%) [ 0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff] [ 0.000000] ACPI: RSDP 00000000000fd920 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000000fffe550 00038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000000fffe590 01121 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000000fffff40 00040 [ 0.000000] ACPI: SSDT 000000000ffffe40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000000ffffd50 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000000ffffd10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 000000000ffff6c0 00644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000000fffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x0fffdfff] [ 0.000000] NODE_DATA [mem 0x0e8c7000-0x0e8d5fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:1f7b041, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x00092fff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65409 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3901 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 960 pages used for memmap [ 0.000000] DMA32 zone: 60478 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88000de00000 s80960 r0 d21440 u1048576 [ 0.000000] pcpu-alloc: s80960 r0 d21440 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] kvm-clock: cpu 0, msr 0:de13041, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr de0de00 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 64379 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: trinity=2m hung_task_panic=1 branch=tip/master log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=vmlinuz-2012-08-22-18-15-35-tip:master:595b3f3-595b3f3-x86_64-randconfig-s153-4-fat BOOT_IMAGE=kernel-tests/kernels/x86_64-randconfig-s153/595b3f3/vmlinuz-3.6.0-rc2-01612-g595b3f3 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 207968k/262136k available (8404k kernel code, 500k absent, 53668k reserved, 7367k data, 628k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 3200.098 MHz processor [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at /c/kernel-tests/src/tip/arch/x86/kernel/vsmp_64.c:158 is_vsmp_box+0xa1/0xb0() [ 0.000000] Hardware name: Bochs [ 0.000000] Pid: 0, comm: swapper/0 Not tainted 3.6.0-rc2-01612-g595b3f3 #292 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x7a/0xb0 [ 0.000000] [] ? is_vsmp_box+0xa1/0xb0 [ 0.000000] [] ? apic_is_clustered_box+0x34/0x4c [ 0.000000] [] ? unsynchronized_tsc+0x23/0x71 [ 0.000000] [] ? tsc_init+0xc2/0xed [ 0.000000] [] ? start_kernel+0x3fd/0x47a [ 0.000000] [] ? repair_env_string+0x5b/0x5b [ 0.000000] [] ? x86_64_start_kernel+0x105/0x114 [ 0.000000] ---[ end trace 349186f5d6d73a21 ]--- [ 0.020001] Calibrating delay loop (skipped) preset value.. 6400.19 BogoMIPS (lpj=12800392) [ 0.020001] pid_max: default: 32768 minimum: 301 [ 0.020059] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.021355] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022502] Mount-cache hash table entries: 256 [ 0.024084] Initializing cgroup subsys debug [ 0.024902] Initializing cgroup subsys cpuacct [ 0.025727] Initializing cgroup subsys devices [ 0.026555] Initializing cgroup subsys freezer [ 0.027379] Initializing cgroup subsys net_prio [ 0.028062] mce: CPU supports 10 MCE banks [ 0.028843] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.028843] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.028843] tlb_flushall_shift: 6 [ 0.034082] ACPI: Core revision 20120711 [ 0.035727] Getting VERSION: 50014 [ 0.036011] Getting VERSION: 50014 [ 0.036676] Getting ID: 0 [ 0.037271] Getting ID: ff000000 [ 0.037972] Getting LVT0: 8700 [ 0.038593] Getting LVT1: 8400 [ 0.039310] enabled ExtINT on CPU#0 [ 0.040675] ENABLING IO-APIC IRQs [ 0.041383] init IO_APIC IRQs [ 0.042004] apic 2 pin 0 not connected [ 0.042717] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.044019] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.045421] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.046875] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.048018] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.049501] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.050936] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.052017] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.053444] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.056018] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.057469] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.058916] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.060018] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.061470] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.062971] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.064017] apic 2 pin 16 not connected [ 0.064780] apic 2 pin 17 not connected [ 0.065544] apic 2 pin 18 not connected [ 0.066312] apic 2 pin 19 not connected [ 0.068007] apic 2 pin 20 not connected [ 0.068771] apic 2 pin 21 not connected [ 0.069535] apic 2 pin 22 not connected [ 0.070300] apic 2 pin 23 not connected [ 0.071151] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072007] smpboot: CPU0: Intel Common KVM processor stepping 01 [ 0.073333] Using local APIC timer interrupts. [ 0.073333] calibrating APIC timer ... [ 0.076004] ... lapic delta = 6254221 [ 0.076004] ... PM-Timer delta = 358195 [ 0.076004] ... PM-Timer result ok [ 0.076004] ..... delta 6254221 [ 0.076004] ..... mult: 268599959 [ 0.076004] ..... calibration result: 4002701 [ 0.076004] ..... CPU clock speed is 3202.1043 MHz. [ 0.076004] ..... host bus clock speed is 1000.2701 MHz. [ 0.076044] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.078154] Testing tracer nop: PASSED [ 0.079502] smpboot: Booting Node 0, Processors #1 OK [ 0.020001] kvm-clock: cpu 1, msr 0:df13041, secondary cpu clock [ 0.020001] masked ExtINT on CPU#1 [ 0.100032] Brought up 2 CPUs [ 0.100029] KVM setup async PF for cpu 1 [ 0.100029] kvm-stealtime: cpu 1, msr df0de00 [ 0.102099] smpboot: Total of 2 processors activated (12800.39 BogoMIPS) [ 0.103358] CPU0 attaching sched-domain: [ 0.104011] domain 0: span 0-1 level CPU [ 0.104803] groups: 0 1 [ 0.105576] CPU1 attaching sched-domain: [ 0.106281] domain 0: span 0-1 level CPU [ 0.107071] groups: 1 0 [ 0.108778] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.109237] dummy: [ 0.109815] NET: Registered protocol family 16 [ 0.110764] i2c-core: driver [dummy] registered [ 0.112149] ACPI: bus type pci registered [ 0.112914] dca service started, version 1.12.1 [ 0.113724] PCI: Using configuration type 1 for base access [ 0.115469] bio: create slab at 0 [ 0.116075] ACPI: Added _OSI(Module Device) [ 0.116819] ACPI: Added _OSI(Processor Device) [ 0.117582] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.118377] ACPI: Added _OSI(Processor Aggregator Device) [ 0.120457] ACPI: EC: Look up EC in DSDT [ 0.122655] ACPI: Interpreter enabled [ 0.123343] ACPI: (supports S0 S5) [ 0.124010] ACPI: Using IOAPIC for interrupt routing [ 0.127083] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.128027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.129002] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.130315] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.132012] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.133398] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) [ 0.134780] PCI: root bus 00: using default resources [ 0.136040] PCI host bridge to bus 0000:00 [ 0.136779] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff] [ 0.138152] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.139034] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.140013] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff] [ 0.141103] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.142280] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.143577] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.145545] pci 0000:00:01.1: reg 20: [io 0xc1c0-0xc1cf] [ 0.147325] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.148310] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.149607] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.150799] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.153135] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.155005] pci 0000:00:02.0: reg 14: [mem 0xfebf4000-0xfebf4fff] [ 0.160090] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] [ 0.161597] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.162882] pci 0000:00:03.0: reg 10: [mem 0xfeba0000-0xfebbffff] [ 0.164635] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f] [ 0.168653] pci 0000:00:03.0: reg 30: [mem 0xfebc0000-0xfebdffff pref] [ 0.170048] pci 0000:00:04.0: [8086:2668] type 00 class 0x040300 [ 0.171203] pci 0000:00:04.0: reg 10: [mem 0xfebf0000-0xfebf3fff] [ 0.174405] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.175717] pci 0000:00:05.0: reg 10: [io 0xc040-0xc07f] [ 0.176636] pci 0000:00:05.0: reg 14: [mem 0xfebf5000-0xfebf5fff] [ 0.181787] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.183093] pci 0000:00:06.0: reg 10: [io 0xc080-0xc0bf] [ 0.184641] pci 0000:00:06.0: reg 14: [mem 0xfebf6000-0xfebf6fff] [ 0.189168] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.190480] pci 0000:00:07.0: reg 10: [io 0xc0c0-0xc0ff] [ 0.192042] pci 0000:00:07.0: reg 14: [mem 0xfebf7000-0xfebf7fff] [ 0.196554] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.197860] pci 0000:00:08.0: reg 10: [io 0xc100-0xc13f] [ 0.199360] pci 0000:00:08.0: reg 14: [mem 0xfebf8000-0xfebf8fff] [ 0.204126] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.205430] pci 0000:00:09.0: reg 10: [io 0xc140-0xc17f] [ 0.206947] pci 0000:00:09.0: reg 14: [mem 0xfebf9000-0xfebf9fff] [ 0.211345] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000 [ 0.212384] pci 0000:00:0a.0: reg 10: [io 0xc180-0xc1bf] [ 0.213876] pci 0000:00:0a.0: reg 14: [mem 0xfebfa000-0xfebfafff] [ 0.218682] pci 0000:00:0b.0: [8086:25ab] type 00 class 0x088000 [ 0.219823] pci 0000:00:0b.0: reg 10: [mem 0xfebfb000-0xfebfb00f] [ 0.222316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.224476] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.225812] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.231141] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.232395] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.233705] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.235018] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.236382] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0 [ 0.237623] i2c-core: driver [ad5398] registered [ 0.240024] i2c-core: driver [max8649] registered [ 0.240833] i2c-core: driver [max8660] registered [ 0.241659] i2c-core: driver [tps65023] registered [ 0.242556] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.244022] vgaarb: loaded [ 0.244601] vgaarb: bridge control possible 0000:00:02.0 [ 0.245502] i2c-core: driver [88PM860x] registered [ 0.246317] i2c-core: driver [tps6105x] registered [ 0.248024] i2c-core: driver [twl] registered [ 0.248802] i2c-core: driver [da903x] registered [ 0.249602] i2c-core: driver [max8925] registered [ 0.250406] i2c-core: driver [max8998] registered [ 0.251213] i2c-core: driver [pcf50633] registered [ 0.252024] i2c-core: driver [ab3100] registered [ 0.252824] i2c-core: driver [tps65090] registered [ 0.253640] i2c-core: driver [rc5t583] registered [ 0.254572] SCSI subsystem initialized [ 0.255280] ACPI: bus type scsi registered [ 0.256063] libata version 3.00 loaded. [ 0.256815] i2c-core: driver [tca6416-keypad] registered [ 0.257689] i2c-core: driver [tca8418_keypad] registered [ 0.258658] PCI: Using ACPI for IRQ routing [ 0.259402] PCI: pci_cache_line_size set to 64 bytes [ 0.260242] e820: reserve RAM buffer [mem 0x00093c00-0x0009ffff] [ 0.261182] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.262298] NET: Registered protocol family 23 [ 0.263101] NET: Registered protocol family 8 [ 0.264019] NET: Registered protocol family 20 [ 0.264989] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.272060] Switching to clocksource kvm-clock [ 0.272827] Warning: could not register annotated branches stats [ 0.278357] FS-Cache: Loaded [ 0.279007] pnp: PnP ACPI init [ 0.279652] ACPI: bus type pnp registered [ 0.280420] pnp 00:00: [bus 00-ff] [ 0.281093] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.281835] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.282705] pnp 00:00: [io 0x0d00-0xffff window] [ 0.283569] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.284520] pnp 00:00: [mem 0xe0000000-0xfebfffff window] [ 0.285503] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.286540] pnp 00:01: [io 0x0070-0x0071] [ 0.287295] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.288851] pnp 00:01: [irq 8] [ 0.289532] pnp 00:01: [io 0x0072-0x0077] [ 0.290296] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.291413] pnp 00:02: [io 0x0060] [ 0.292158] pnp 00:02: [io 0x0064] [ 0.292939] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.294385] pnp 00:02: [irq 1] [ 0.295080] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.296207] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.297727] pnp 00:03: [irq 12] [ 0.298372] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.299546] pnp 00:04: [io 0x03f2-0x03f5] [ 0.300298] pnp 00:04: [io 0x03f7] [ 0.301071] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.302619] pnp 00:04: [irq 6] [ 0.303237] pnp 00:04: [dma 2] [ 0.303941] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.305079] pnp 00:05: [io 0x0378-0x037f] [ 0.305936] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.307400] pnp 00:05: [irq 7] [ 0.308103] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.309211] pnp 00:06: [io 0x03f8-0x03ff] [ 0.310007] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.311604] pnp 00:06: [irq 4] [ 0.312260] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.313496] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 0.314330] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.315617] pnp: PnP ACPI: found 8 devices [ 0.316370] ACPI: ACPI bus type pnp unregistered [ 0.322821] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.323782] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff] [ 0.324926] NET: Registered protocol family 1 [ 0.325824] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.326885] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.327926] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.329059] pci 0000:00:02.0: Boot video device [ 0.329985] PCI: CLS 0 bytes, default 64 [ 0.330847] Trying to unpack rootfs image as initramfs... [ 0.820372] Freeing initrd memory: 23656k freed [ 0.824970] Machine check injector initialized [ 0.825801] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 0.827501] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way. [ 0.830079] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 0.831155] audit: initializing netlink socket (disabled) [ 0.832062] type=2000 audit(1345630812.832:1): initialized [ 0.908068] Testing tracer function: PASSED [ 1.108593] Testing ftrace regs(no arch support): PASSED [ 1.288154] Testing tracer wakeup: PASSED [ 1.768201] Testing tracer wakeup_rt: [ 1.824153] tsc: Refined TSC clocksource calibration: 3200.115 MHz PASSED [ 2.248191] Testing tracer branch: PASSED [ 2.533016] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.535126] VFS: Disk quotas dquot_6.5.2 [ 2.535916] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.537341] OCFS2 1.5.0 [ 2.538148] OCFS2 DLMFS 1.5.0 [ 2.538894] OCFS2 User DLM kernel interface loaded [ 2.539715] OCFS2 Node Manager 1.5.0 [ 2.542217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.543562] io scheduler noop registered [ 2.544324] io scheduler cfq registered (default) [ 2.545288] xz_dec_test: module loaded [ 2.545990] xz_dec_test: Create a device node with 'mknod xz_dec_test c 252 0' and write .xz files to it. [ 2.547588] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.548531] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.549635] vmlfb: initializing [ 2.550287] no IO addresses supplied [ 2.551083] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.552422] ACPI: Power Button [PWRF] [ 2.553386] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 2.559320] HDLC line discipline maxframe=4096 [ 2.560102] N_HDLC line discipline registered. [ 2.560898] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 2.561784] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.584052] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.606496] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.607546] MOXA Intellio family driver version 6.0k [ 2.609559] SyncLink GT [ 2.610126] SyncLink GT, tty major#250 [ 2.610840] SyncLink GT no devices found [ 2.611601] lp: driver loaded but no devices found [ 2.612467] Real Time Clock Driver v1.12b [ 2.613212] Non-volatile memory driver v1.3 [ 2.613993] smapi::smapi_init, ERROR invalid usSmapiID [ 2.614854] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 2.616396] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 2.617696] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 2.618683] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 2.620283] Hangcheck: Using getrawmonotonic(). [ 2.621098] parport_pc 00:05: reported by Plug and Play ACPI [ 2.622117] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 2.716073] lp0: using parport0 (interrupt-driven). [ 2.716922] lp0: console ready [ 2.718104] Floppy drive(s): fd0 is 1.44M [ 2.718735] brd: module loaded [ 2.718736] HP CISS Driver (v 3.6.26) [ 2.720858] nbd: registered device at major 43 [ 2.722255] lkdtm: No crash points registered, enable through debugfs [ 2.723285] i2c-core: driver [at24] registered [ 2.724072] i2c-core: driver [eeprom] registered [ 2.724919] i2c-core: driver [lis3lv02d_i2c] registered [ 2.725835] Loading iSCSI transport class v2.0-870. [ 2.726776] rdac: device handler registered [ 2.727585] hp_sw: device handler registered [ 2.728573] Rounding down aligned max_sectors from 4294967295 to 8388600 [ 2.730195] mkiss: AX.25 Multikiss, Hans Albas PE1AYX [ 2.731050] AX.25: 6pack driver, Revision: 0.3.0 [ 2.731845] YAM driver version 0.8 by F1OAT/F6FBB [ 2.732845] AX.25: bpqether driver version 004 [ 2.733630] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 2.733630] baycom_ser_fdx: version 0.10 [ 2.735438] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [ 2.736391] hdlcdrv: version 0.8 [ 2.737027] baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 2.737027] baycom_par: version 0.9 [ 2.739209] aoe: AoE v47 initialised. [ 2.739400] FDC 0 is a S82078B [ 2.740770] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.742745] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.743594] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.747388] mousedev: PS/2 mouse device common for all mice [ 2.748341] i2c-core: driver [adp5588_keys] registered [ 2.749208] i2c-core: driver [lm8333] registered [ 2.750016] i2c-core: driver [max7359] registered [ 2.750838] i2c-core: driver [mpr121] registered [ 2.751686] i2c-core: driver [as5011] registered [ 2.752538] i2c-core: driver [ad714x_captouch] registered [ 2.753424] i2c-core: driver [bma150] registered [ 2.754231] i2c-core: driver [kxtj9] registered [ 2.755034] i2c-core: driver [mma8450] registered [ 2.755853] i2c-core: driver [mpu3050] registered [ 2.756725] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 2.757784] I2O subsystem v1.325 [ 2.758433] i2o: max drivers = 8 [ 2.759320] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 2.760834] I2O Bus Adapter OSM v1.317 [ 2.761585] I2O Block Device OSM v1.325 [ 2.762378] I2O ProcFS OSM v1.316 [ 2.763060] i2c-core: driver [smbus_alert] registered [ 2.763915] i2c /dev entries driver [ 2.764644] i2c-parport: adapter type unspecified [ 2.765502] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/none/none/1.1.2.2 [ 2.766877] CAPI 2.0 started up with major 68 (middleware) [ 2.767793] b1pci: revision 1.1.2.2 [ 2.768484] b1: revision 1.1.2.2 [ 2.769125] b1dma: revision 1.1.2.3 [ 2.769797] t1pci: revision 1.1.2.2 [ 2.770484] c4: revision 1.1.2.2 [ 2.771148] dss1_divert module successfully installed [ 2.771992] HiSax: Linux Driver for passive ISDN cards [ 2.772862] HiSax: Version 3.5 (kernel) [ 2.773578] HiSax: Layer1 Revision 2.46.2.5 [ 2.774329] HiSax: Layer2 Revision 2.30.2.4 [ 2.775068] HiSax: TeiMgr Revision 2.20.2.3 [ 2.775821] HiSax: Layer3 Revision 2.22.2.3 [ 2.776603] HiSax: LinkLayer Revision 2.59.2.4 [ 2.777382] HiSax: Total 1 card defined [ 2.778108] HiSax: Card 1 Protocol 1TR6 Id=HiSax (0) [ 2.778960] HiSax: Traverse Tech. NETspider-U driver Rev. 2.14.2.3 [ 2.779927] NETspider-U: No PCI card found [ 2.780691] HiSax: Card NETspider-U not installed ! [ 2.781536] gigaset: Driver for Gigaset 307x (debug build) [ 2.782422] gigaset: Kernel CAPI interface [ 2.783191] cpuidle: using governor ladder [ 2.783949] cpuidle: using governor menu [ 2.784691] sdhci: Secure Digital Host Controller Interface driver [ 2.785666] sdhci: Copyright(c) Pierre Ossman [ 2.786450] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 2.787382] wbsd: Copyright(c) Pierre Ossman [ 2.788157] via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc. [ 2.789561] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.790523] cs5535-clockevt: Could not allocate MFGPT timer [ 2.902595] panel: driver version 0.9.5 registered on parport0 (io=0x378). [ 2.903646] Initializing Realtek PCIE storage driver... [ 2.904559] BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 [ 2.906065] IP: [] iio_buffer_register+0x20/0x380 [ 2.907144] PGD 0 [ 2.907720] Oops: 0000 [#1] SMP [ 2.908513] CPU 0 [ 2.908528] Pid: 1, comm: swapper/0 Tainted: G W 3.6.0-rc2-01612-g595b3f3 #292 Bochs Bochs [ 2.908528] RIP: 0010:[] [] iio_buffer_register+0x20/0x380 [ 2.908528] RSP: 0018:ffff88000d0b7e50 EFLAGS: 00010246 [ 2.908528] RAX: ffff88000d1ca6e8 RBX: 0000000000000000 RCX: 0000000000000000 [ 2.908528] RDX: 0000000000000005 RSI: ffffffff81ea9a00 RDI: ffff88000d1ea800 [ 2.908528] RBP: ffff88000d0b7eb0 R08: 000000000000000a R09: 000000000000fffe [ 2.908528] R10: 0000000000000000 R11: 0000000000000006 R12: 0000000000000145 [ 2.908528] R13: ffffffff81fb8a66 R14: ffff88000d1ea800 R15: 0000000000000000 [ 2.908528] FS: 0000000000000000(0000) GS:ffff88000de00000(0000) knlGS:0000000000000000 [ 2.908528] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2.908528] CR2: 0000000000000070 CR3: 0000000001e15000 CR4: 00000000000006f0 [ 2.908528] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2.908528] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 2.908528] Process swapper/0 (pid: 1, threadinfo ffff88000d0b6000, task ffff88000d032000) [ 2.908528] Stack: [ 2.908528] ffff88000d0b7ea0 ffff88000d0b7e60 ffff88000d0b7e90 ffff88000d1ea800 [ 2.908528] 0000000000000000 000000000000023c 0000000000013fd0 0000000000000000 [ 2.908528] 0000000000000145 ffffffff81fb8a66 0000000000000000 0000000000000000 [ 2.908528] Call Trace: [ 2.908528] [] ? rtsx_init+0x25/0x25 [ 2.908528] [] ? iio_dummy_init+0x108/0x15a [ 2.908528] [] ? do_one_initcall+0x75/0x131 [ 2.908528] [] ? kernel_init+0x116/0x19a [ 2.908528] [] ? do_early_param+0x83/0x83 [ 2.908528] [] ? kernel_thread_helper+0x4/0x10 [ 2.908528] [] ? do_one_initcall+0x131/0x131 [ 2.908528] [] ? gs_change+0x13/0x13 [ 2.908528] Code: 00 48 83 c7 50 5d e9 90 a0 98 ff 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 38 e8 7a 9a 13 00 4c 8b bf 48 02 00 00 49 89 fe <49> 8b 47 70 48 85 c0 74 1b 8b 8f b8 03 00 00 48 63 f9 83 c1 01 [ 2.908528] RIP [] iio_buffer_register+0x20/0x380 [ 2.908528] RSP [ 2.908528] CR2: 0000000000000070 [ 2.948884] ---[ end trace 349186f5d6d73a22 ]--- [ 2.949684] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 2.949684] [ 2.951518] Rebooting in 10 seconds..