| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 24 Sep 2012 05:46:10 +0000
From: "AnilKumar, Chimata" <anilkumar@...com>
To: Éric Piel <eric.piel@...mplin-utc.net>
CC: "arnd@...db.de" <arnd@...db.de>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"jic23@....ac.uk" <jic23@....ac.uk>,
"greg@...ah.com" <greg@...ah.com>,
"akpm@...ux-foundation.org" <akpm@...ux-foundation.org>,
"broonie@...nsource.wolfsonmicro.com"
<broonie@...nsource.wolfsonmicro.com>,
"dmitry.torokhov@...il.com" <dmitry.torokhov@...il.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v2] lis3lv02d: Add STMicroelectronics lis331dlh digital
accelerometer
Hi Eric,
Thanks for the comments,
On Mon, Sep 24, 2012 at 03:08:19, Éric Piel wrote:
> On 22-08-12 08:30, AnilKumar Ch wrote:
> > This patch adds support for lis331dlh digital accelerometer to the
> > lis3lv02d driver family. Adds ID field for detecting the lis331dlh
> > module, based on this ID field lis3lv02d driver will export the
> > lis331dlh module functionality.
>
> Hello AnilKumar,
>
> Sorry for taking so long to review your patch. Overall, it looks great :-)
>
> There are just a few points that almost code-style/comment that needs to
> be fixed. See below. Could you fix these small issues, and submit a new
> patch for Andrew to pick it in his queue?
As I can see this patch is already in linux-next, I will submit
a new patch by addressing all your comments.
>
> Here is my:
> Reviewed-by: Éric Piel <eric.piel@...mplin-utc.net>
>
>
> >
> > Signed-off-by: AnilKumar Ch <anilkumar@...com>
> > ---
> > Changes from v1:
> > - Removed G range sysfs entry from v1
> > - Modified documentation to specify lis331dlh is supported
> >
> > Documentation/misc-devices/lis3lv02d | 3 ++-
> > drivers/misc/lis3lv02d/lis3lv02d.c | 42 +++++++++++++++++++++++++++++-
> > drivers/misc/lis3lv02d/lis3lv02d.h | 44 +++++++++++++++++++++++++++-----
> > drivers/misc/lis3lv02d/lis3lv02d_i2c.c | 7 ++++-
> > 4 files changed, 87 insertions(+), 9 deletions(-)
> >
> > diff --git a/Documentation/misc-devices/lis3lv02d b/Documentation/misc-devices/lis3lv02d
> > index f1a4ec8..af815b9 100644
> > --- a/Documentation/misc-devices/lis3lv02d
> > +++ b/Documentation/misc-devices/lis3lv02d
> > @@ -4,7 +4,8 @@ Kernel driver lis3lv02d
> > Supported chips:
> >
> > * STMicroelectronics LIS3LV02DL, LIS3LV02DQ (12 bits precision)
> > - * STMicroelectronics LIS302DL, LIS3L02DQ, LIS331DL (8 bits)
> > + * STMicroelectronics LIS302DL, LIS3L02DQ, LIS331DL (8 bits) and
> > + LIS331DLH (16 bits)
> >
> > Authors:
> > Yan Burman <burman.yan@...il.com>
> > diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
> > index 29d12a7..c0a9199 100644
> > --- a/drivers/misc/lis3lv02d/lis3lv02d.c
> > +++ b/drivers/misc/lis3lv02d/lis3lv02d.c
> > @@ -80,6 +80,14 @@
> > #define LIS3_SENSITIVITY_12B ((LIS3_ACCURACY * 1000) / 1024)
> > #define LIS3_SENSITIVITY_8B (18 * LIS3_ACCURACY)
> >
> > +/*
> > + * LIS3331DLH spec says 1LSBs corresponds 4G/1024 -> 1LSB is 1000/1024 mG.
> > + * Sensitivity values for +/-2G, outdata in 12 bits for +/-2G scale. so 4
> > + * bits adjustment is required
> > + */
> > +#define LIS3DLH_SENSITIVITY_2G ((LIS3_ACCURACY * 1000) / 1024)
> > +#define SHIFT_ADJ_2G 4
> > +
> You said later:
> >
> > Typo mistake this should be 4G/4096
> Could you fix the comment. Even better, change LIS3331DLH to LIS331DLH
>
> Also, if I understand correctly, there is currently no support for
> changing the sensitivity. It stays at 2G all the time, right? In such
> case, please add a sentence in this comment that the driver does only
> support the 2G sensitivity for now.
I will do this
>
>
> > #define LIS3_DEFAULT_FUZZ_12B 3
> > #define LIS3_DEFAULT_FLAT_12B 3
> > #define LIS3_DEFAULT_FUZZ_8B 1
> > @@ -133,6 +141,19 @@ static s16 lis3lv02d_read_12(struct lis3lv02d *lis3, int reg)
> > return (s16)((hi << 8) | lo);
> > }
> >
> > +/* 12bits for 2G range, 13 bits for 4G range and 14 bits for 8G range */
> > +static s16 lis3lv02d_read_16(struct lis3lv02d *lis3, int reg)
> > +{
> > + u8 lo, hi;
> > + int v;
> > +
> > + lis3->read(lis3, reg - 1, &lo);
> > + lis3->read(lis3, reg, &hi);
> > + v = (int) ((hi << 8) | lo);
> > +
> > + return (s16) v >> lis3->shift_adj;
> > +}
> As the method reads 12, 13, or 14 bits, it's a bit tricky to call it
> "*_read_16". I'd suggest maybe "lis3lv02d_read_12_14",
> "lis3lv02d_read_adj_16", or even "lis331dlh_read_data". Pick the one you
> prefer :-)
Comment is available to convey the number of bits so I am changing it to
"lis331dlh_read_data".
>
>
> > /**
> > * lis3lv02d_get_axis - For the given axis, give the value converted
> > * @axis: 1,2,3 - can also be negative
> > @@ -193,6 +214,7 @@ static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z)
> > static int lis3_12_rates[4] = {40, 160, 640, 2560};
> > static int lis3_8_rates[2] = {100, 400};
> > static int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};
> > +static int lis3_3dlh_rates[4] = {50, 100, 400, 1000};
> >
> > /* ODR is Output Data Rate */
> > static int lis3lv02d_get_odr(struct lis3lv02d *lis3)
> > @@ -265,7 +287,7 @@ static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3])
> > (LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY));
> > }
> >
> > - if (lis3->whoami == WAI_3DC) {
> > + if ((lis3->whoami == WAI_3DC) || (lis3->whoami == WAI_3DLH)) {
> > ctlreg = CTRL_REG4;
> > selftest = CTRL4_ST0;
> > } else {
> > @@ -396,9 +418,17 @@ int lis3lv02d_poweron(struct lis3lv02d *lis3)
> > lis3->read(lis3, CTRL_REG2, ®);
> > if (lis3->whoami == WAI_12B)
> > reg |= CTRL2_BDU | CTRL2_BOOT;
> > + else if (lis3->whoami == WAI_3DLH)
> > + reg |= CTRL2_BOOT_3DLH;
> > else
> > reg |= CTRL2_BOOT_8B;
> > lis3->write(lis3, CTRL_REG2, reg);
> > +
> > + if (lis3->whoami == WAI_3DLH) {
> > + lis3->read(lis3, CTRL_REG4, ®);
> > + reg |= CTRL4_BDU;
> > + lis3->write(lis3, CTRL_REG4, reg);
> > + }
> > }
> >
> > err = lis3lv02d_get_pwron_wait(lis3);
> > @@ -954,6 +984,16 @@ int lis3lv02d_init_device(struct lis3lv02d *lis3)
> > lis3->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3;
> > lis3->scale = LIS3_SENSITIVITY_8B;
> > break;
> > + case WAI_3DLH:
> > + pr_info("16 bits 3DLH sensor found\n");
I am planning to change this print message to
"LIS331DLH sensor found"
> > + lis3->read_data = lis3lv02d_read_16;
> > + lis3->mdps_max_val = 2048; /* 12 bits for 2G */
> > + lis3->shift_adj = SHIFT_ADJ_2G;
> > + lis3->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
> > + lis3->odrs = lis3_3dlh_rates;
> > + lis3->odr_mask = CTRL1_DR0 | CTRL1_DR1;
> > + lis3->scale = LIS3DLH_SENSITIVITY_2G;
> > + break;
> > default:
> > pr_err("unknown sensor type 0x%X\n", lis3->whoami);
> > return -EINVAL;
> > diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h
> > index 2b1482a..c1a545e 100644
> > --- a/drivers/misc/lis3lv02d/lis3lv02d.h
> > +++ b/drivers/misc/lis3lv02d/lis3lv02d.h
> > @@ -26,12 +26,12 @@
> > /*
> > * This driver tries to support the "digital" accelerometer chips from
> > * STMicroelectronics such as LIS3LV02DL, LIS302DL, LIS3L02DQ, LIS331DL,
> > - * LIS35DE, or LIS202DL. They are very similar in terms of programming, with
> > - * almost the same registers. In addition to differing on physical properties,
> > - * they differ on the number of axes (2/3), precision (8/12 bits), and special
> > - * features (freefall detection, click...). Unfortunately, not all the
> > - * differences can be probed via a register.
> > - * They can be connected either via I²C or SPI.
> > + * LIS331DLH, LIS35DE, or LIS202DL. They are very similar in terms of
> > + * programming, with almost the same registers. In addition to differing
> > + * on physical properties, they differ on the number of axes (2/3),
> > + * precision (8/12 bits), and special features (freefall detection,
> > + * click...). Unfortunately, not all the differences can be probed via
> > + * a register. They can be connected either via I²C or SPI.
> > */
> >
> > #include <linux/lis3lv02d.h>
> > @@ -96,12 +96,22 @@ enum lis3lv02d_reg {
> > };
> >
> > enum lis3_who_am_i {
> > + WAI_3DLH = 0x32, /* 16 bits: LIS331DLH */
> > WAI_3DC = 0x33, /* 8 bits: LIS3DC, HP3DC */
> > WAI_12B = 0x3A, /* 12 bits: LIS3LV02D[LQ]... */
> > WAI_8B = 0x3B, /* 8 bits: LIS[23]02D[LQ]... */
> > WAI_6B = 0x52, /* 6 bits: LIS331DLF - not supported */
> > };
> >
> > +enum lis3_type {
> > + LIS3DC,
> > + HP3DC,
> > + LIS3LV02D,
> > + LIS2302D,
> > + LIS331DLF,
> > + LIS331DLH,
> > +};
> > +
> > enum lis3lv02d_ctrl1_12b {
> > CTRL1_Xen = 0x01,
> > CTRL1_Yen = 0x02,
> > @@ -129,6 +139,27 @@ enum lis3lv02d_ctrl1_3dc {
> > CTRL1_ODR3 = 0x80,
> > };
> >
> > +enum lis331dlh_ctrl1 {
> > + CTRL1_DR0 = 0x08,
> > + CTRL1_DR1 = 0x10,
> > + CTRL1_PM0 = 0x20,
> > + CTRL1_PM1 = 0x40,
> > + CTRL1_PM2 = 0x80,
> > +};
> > +
> > +enum lis331dlh_ctrl2 {
> > + CTRL2_HPEN1 = 0x04,
> > + CTRL2_HPEN2 = 0x08,
> > + CTRL2_FDS_3DLH = 0x10,
> > + CTRL2_BOOT_3DLH = 0x80,
> > +};
> > +
> > +enum lis331dlh_ctrl4 {
> > + CTRL4_STSIGN = 0x08,
> > + CTRL4_BLE = 0x40,
> > + CTRL4_BDU = 0x80,
> > +};
> > +
> > enum lis3lv02d_ctrl2 {
> > CTRL2_DAS = 0x01,
> > CTRL2_SIM = 0x02,
> > @@ -279,6 +310,7 @@ struct lis3lv02d {
> > int data_ready_count[2];
> > atomic_t wake_thread;
> > unsigned char irq_cfg;
> > + unsigned int shift_adj;
> >
> > struct lis3lv02d_platform_data *pdata; /* for passing board config */
> > struct mutex mutex; /* Serialize poll and selftest */
> > diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
> > index c02fea0..98cf9ba 100644
> > --- a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
> > +++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
> > @@ -90,7 +90,11 @@ static int lis3_i2c_init(struct lis3lv02d *lis3)
> > if (ret < 0)
> > return ret;
> >
> > - reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
> > + if (lis3->whoami == WAI_3DLH)
> > + reg |= CTRL1_PM0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
> > + else
> > + reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
> > +
> > return lis3->write(lis3, CTRL_REG1, reg);
> > }
> >
> > @@ -232,6 +236,7 @@ static int lis3_i2c_runtime_resume(struct device *dev)
> >
> > static const struct i2c_device_id lis3lv02d_id[] = {
> > {"lis3lv02d", 0 },
> > + {"lis331dlh", LIS331DLH},
> I'm not fully grasping the meaning of this table. But as there seems to
> be no user of the second value, I imagine this value just has to be
> different for each entry? If so, I'd recommend to change the 0 to
> LIS3LV02D, to make it clear that LIS331DLH != 0. Or is this value
> meaningful for the user, in which case we cannot change it anymore?
>
I will change this and update the enum lis3_type accordingly, which
has these macros
Thanks
AnilKumar
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists