linux-kernel - Re: [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 26 Sep 2012 11:10:48 +0530
From:	"ABRAHAM, KISHON VIJAY" <kishon@...com>
To:	balbi@...com
Cc:	grant.likely@...retlab.ca, rob.herring@...xeda.com,
	rob@...dley.net, linux@....linux.org.uk, linux-usb@...r.kernel.org,
	linux-omap@...r.kernel.org, devicetree-discuss@...ts.ozlabs.org,
	linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5

Hi,

On Wed, Sep 19, 2012 at 5:26 PM, Felipe Balbi <balbi@...com> wrote:
> On Wed, Sep 19, 2012 at 05:00:29PM +0530, Kishon Vijay Abraham I wrote:
>> "usb_otg_ss_refclk960m" is needed by usb2 phy present in omap5. For
>> omap4, the clk_get of this clock will fail since it does not have this
>> clock.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
>> ---
>>  Documentation/devicetree/bindings/usb/usb-phy.txt |    3 +++
>>  drivers/usb/phy/omap-usb2.c                       |   28 ++++++++++++++++++++-
>>  2 files changed, 30 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
>> index 7c5fd89..d5626de 100644
>> --- a/Documentation/devicetree/bindings/usb/usb-phy.txt
>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>> @@ -24,6 +24,9 @@ Required properties:
>>  add the address of control module phy power register until a driver for
>>  control module is added
>>
>> +Optional properties:
>> + - has960mhzclk: should be added if the phy needs 960mhz clock
>> +
>>  This is usually a subnode of ocp2scp to which it is connected.
>>
>>  usb3phy@...84400 {
>> diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c
>> index d36c282..d6612ba 100644
>> --- a/drivers/usb/phy/omap-usb2.c
>> +++ b/drivers/usb/phy/omap-usb2.c
>> @@ -146,6 +146,7 @@ static int __devinit omap_usb2_probe(struct platform_device *pdev)
>>       struct omap_usb                 *phy;
>>       struct usb_otg                  *otg;
>>       struct resource                 *res;
>> +     struct device_node              *np = pdev->dev.of_node;
>>
>>       phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
>>       if (!phy) {
>> @@ -190,6 +191,15 @@ static int __devinit omap_usb2_probe(struct platform_device *pdev)
>>       }
>>       clk_prepare(phy->wkupclk);
>>
>> +     if (of_property_read_bool(np, "has960mhzclk")) {
>> +             phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
>> +             if (IS_ERR(phy->optclk)) {
>> +                     dev_err(&pdev->dev, "unable to get refclk960m\n");
>> +                     return PTR_ERR(phy->optclk);
>> +             }
>> +             clk_prepare(phy->optclk);
>> +     }
>
> instead, can't you just always try to get the clock but ignore the error
> if it fails ?

This clock is needed for usb2 to work in dwc3 (omap5). So we have to
report the error in case we dont get the clock no?

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/