Date:	Fri, 5 Oct 2012 13:04:53 +0530
From:	"Patil, Rachna" <rachna@...com>
To:	<linux-kernel@...r.kernel.org>, <linux-input@...r.kernel.org>,
	<linux-iio@...r.kernel.org>
CC:	Samuel Ortiz <sameo@...ux.intel.com>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Dmitry Torokhov <dtor@...l.ru>,
	Jonathan Cameron <jic23@....ac.uk>,
	"Patil, Rachna" <rachna@...com>
Subject: [PATCH v5 2/4] MFD: ti_tscadc: Add support for TI's TSC/ADC MFDevice

Add the mfd core driver which supports touchscreen
and ADC.
With this patch we are only adding infrastructure to
support the MFD clients.

Signed-off-by: Patil, Rachna <rachna@...com>
---
Changes in v2:
	Merged "[PATCH 5/5] MFD: ti_tscadc: Add check on number of i/p channels",
	patch submitted in previous version into this file.

Changes in v3:
	No changes

Changes in v4:
	No changes

Changes in v5:
	Make use of devm_xxx and regmap MMIO API's.

 drivers/mfd/Kconfig                  |   11 ++
 drivers/mfd/Makefile                 |    1 +
 drivers/mfd/ti_am335x_tscadc.c       |  250 ++++++++++++++++++++++++++++++++++
 include/linux/mfd/ti_am335x_tscadc.h |  137 +++++++++++++++++++
 4 files changed, 399 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mfd/ti_am335x_tscadc.c
 create mode 100644 include/linux/mfd/ti_am335x_tscadc.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index b1a1462..8a1d655 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -94,6 +94,17 @@ config MFD_TI_SSP
 	  To compile this driver as a module, choose M here: the
 	  module will be called ti-ssp.
 
+config MFD_TI_AM335X_TSCADC
+	tristate "TI ADC / Touch Screen chip support"
+	select MFD_CORE
+	select REGMAP
+	select REGMAP_MMIO
+	help
+	  If you say yes here you get support for Texas Instruments series
+	  of Touch Screen /ADC chips.
+	  To compile this driver as a module, choose M here: the
+	  module will be called ti_am335x_tscadc.
+
 config HTC_EGPIO
 	bool "HTC EGPIO support"
 	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 79dd22d..bc6b2f0 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o
 obj-$(CONFIG_MFD_DAVINCI_VOICECODEC)	+= davinci_voicecodec.o
 obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
 obj-$(CONFIG_MFD_TI_SSP)	+= ti-ssp.o
+obj-$(CONFIG_MFD_TI_AM335X_TSCADC)	+= ti_am335x_tscadc.o
 
 obj-$(CONFIG_MFD_STA2X11)	+= sta2x11-mfd.o
 obj-$(CONFIG_MFD_STMPE)		+= stmpe.o
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
new file mode 100644
index 0000000..14df67b
--- /dev/null
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -0,0 +1,250 @@
+/*
+ * TI Touch Screen / ADC MFD driver
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/regmap.h>
+#include <linux/mfd/core.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mfd/ti_am335x_tscadc.h>
+
+static unsigned int tscadc_readl(struct ti_tscadc_dev *tsadc, unsigned int reg)
+{
+	unsigned int val;
+
+	regmap_read(tsadc->regmap_tscadc, reg, &val);
+	return val;
+}
+
+static void tscadc_writel(struct ti_tscadc_dev *tsadc, unsigned int reg,
+					unsigned int val)
+{
+	regmap_write(tsadc->regmap_tscadc, reg, val);
+}
+
+static const struct regmap_config tscadc_regmap_config = {
+	.name = "ti_tscadc",
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+};
+
+static void tscadc_idle_config(struct ti_tscadc_dev *config)
+{
+	unsigned int idleconfig;
+
+	idleconfig = STEPCONFIG_YNN | STEPCONFIG_INM_ADCREFM |
+			STEPCONFIG_INP_ADCREFM | STEPCONFIG_YPN;
+
+	tscadc_writel(config, REG_IDLECONFIG, idleconfig);
+}
+
+static	int __devinit ti_tscadc_probe(struct platform_device *pdev)
+{
+	struct ti_tscadc_dev	*tscadc;
+	struct resource		*res;
+	struct clk		*clk;
+	struct mfd_tscadc_board	*pdata = pdev->dev.platform_data;
+	int			irq;
+	int			err, ctrl;
+	int			clk_value, clock_rate;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Could not find platform data\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no memory resource defined.\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq ID is specified.\n");
+		return -EINVAL;
+	}
+
+	/* Allocate memory for device */
+	tscadc = devm_kzalloc(&pdev->dev,
+			sizeof(struct ti_tscadc_dev), GFP_KERNEL);
+	if (!tscadc) {
+		dev_err(&pdev->dev, "failed to allocate memory.\n");
+		return -ENOMEM;
+	}
+	tscadc->dev = &pdev->dev;
+	tscadc->irq = irq;
+
+	res = devm_request_mem_region(&pdev->dev,
+			res->start, resource_size(res), pdev->name);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to reserve registers.\n");
+		err = -EBUSY;
+		goto err;
+	}
+
+	tscadc->tscadc_base = devm_ioremap(&pdev->dev,
+			res->start, resource_size(res));
+	if (!tscadc->tscadc_base) {
+		dev_err(&pdev->dev, "failed to map registers.\n");
+		err = -ENOMEM;
+		goto err;
+	}
+
+	tscadc->regmap_tscadc = devm_regmap_init_mmio(&pdev->dev,
+			tscadc->tscadc_base, &tscadc_regmap_config);
+	if (IS_ERR(tscadc->regmap_tscadc)) {
+		dev_err(&pdev->dev, "regmap init failed\n");
+		err = PTR_ERR(tscadc->regmap_tscadc);
+		goto err;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	/*
+	 * The TSC_ADC_Subsystem has 2 clock domains
+	 * OCP_CLK and ADC_CLK.
+	 * The ADC clock is expected to run at target of 3MHz,
+	 * and expected to capture 12-bit data at a rate of 200 KSPS.
+	 * The TSC_ADC_SS controller design assumes the OCP clock is
+	 * at least 6x faster than the ADC clock.
+	 */
+	clk = clk_get(&pdev->dev, "adc_tsc_fck");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get TSC fck\n");
+		err = PTR_ERR(clk);
+		goto err_disable_clk;
+	}
+	clock_rate = clk_get_rate(clk);
+	clk_put(clk);
+	clk_value = clock_rate / ADC_CLK;
+	if (clk_value < MAX_CLK_DIV) {
+		dev_err(&pdev->dev, "clock input less than min clock requirement\n");
+		err = -EINVAL;
+		goto err_disable_clk;
+	}
+	/* TSCADC_CLKDIV needs to be configured to the value minus 1 */
+	clk_value = clk_value - 1;
+	tscadc_writel(tscadc, REG_CLKDIV, clk_value);
+
+	/* Set the control register bits */
+	ctrl = CNTRLREG_STEPCONFIGWRT |
+			CNTRLREG_TSCENB |
+			CNTRLREG_STEPID |
+			CNTRLREG_4WIRE;
+	tscadc_writel(tscadc, REG_CTRL, ctrl);
+
+	/* Set register bits for Idle Config Mode */
+	tscadc_idle_config(tscadc);
+
+	/* Enable the TSC module enable bit */
+	ctrl = tscadc_readl(tscadc, REG_CTRL);
+	ctrl |= CNTRLREG_TSCSSENB;
+	tscadc_writel(tscadc, REG_CTRL, ctrl);
+
+	err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
+			TSCADC_CELLS, NULL, 0, NULL);
+	if (err < 0)
+		goto err_disable_clk;
+
+	device_init_wakeup(&pdev->dev, true);
+	platform_set_drvdata(pdev, tscadc);
+
+	return 0;
+
+err_disable_clk:
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+err:
+	return err;
+}
+
+static int __devexit ti_tscadc_remove(struct platform_device *pdev)
+{
+	struct ti_tscadc_dev	*tscadc = platform_get_drvdata(pdev);
+
+	tscadc_writel(tscadc, REG_SE, 0x00);
+
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	mfd_remove_devices(tscadc->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tscadc_suspend(struct device *dev)
+{
+	struct ti_tscadc_dev	*tscadc_dev = dev_get_drvdata(dev);
+
+	tscadc_writel(tscadc_dev, REG_SE, 0x00);
+	pm_runtime_put_sync(dev);
+
+	return 0;
+}
+
+static int tscadc_resume(struct device *dev)
+{
+	struct ti_tscadc_dev	*tscadc_dev = dev_get_drvdata(dev);
+	unsigned int restore, ctrl;
+
+	pm_runtime_get_sync(dev);
+
+	/* context restore */
+	ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_TSCENB |
+			CNTRLREG_STEPID | CNTRLREG_4WIRE;
+	tscadc_writel(tscadc_dev, REG_CTRL, ctrl);
+	tscadc_idle_config(tscadc_dev);
+	tscadc_writel(tscadc_dev, REG_SE, STPENB_STEPENB);
+	restore = tscadc_readl(tscadc_dev, REG_CTRL);
+	tscadc_writel(tscadc_dev, REG_CTRL,
+			(restore | CNTRLREG_TSCSSENB));
+
+	return 0;
+}
+
+static const struct dev_pm_ops tscadc_pm_ops = {
+	.suspend = tscadc_suspend,
+	.resume = tscadc_resume,
+};
+#define TSCADC_PM_OPS (&tscadc_pm_ops)
+#else
+#define TSCADC_PM_OPS NULL
+#endif
+
+static struct platform_driver ti_tscadc_driver = {
+	.driver = {
+		.name   = "ti_tscadc",
+		.owner	= THIS_MODULE,
+		.pm	= TSCADC_PM_OPS,
+	},
+	.probe	= ti_tscadc_probe,
+	.remove	= __devexit_p(ti_tscadc_remove),
+
+};
+
+module_platform_driver(ti_tscadc_driver);
+
+MODULE_DESCRIPTION("TI touchscreen / ADC MFD controller driver");
+MODULE_AUTHOR("Rachna Patil <rachna@...com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
new file mode 100644
index 0000000..b7232b1
--- /dev/null
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -0,0 +1,137 @@
+#ifndef __LINUX_TI_AM335X_TSCADC_MFD_H
+#define __LINUX_TI_AM335X_TSCADC_MFD_H
+
+/*
+ * TI Touch Screen / ADC MFD driver
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mfd/core.h>
+
+#define REG_RAWIRQSTATUS	0x024
+#define REG_IRQSTATUS		0x028
+#define REG_IRQENABLE		0x02C
+#define REG_IRQCLR		0x030
+#define REG_IRQWAKEUP		0x034
+#define REG_CTRL		0x040
+#define REG_ADCFSM		0x044
+#define REG_CLKDIV		0x04C
+#define REG_SE			0x054
+#define REG_IDLECONFIG		0x058
+#define REG_CHARGECONFIG	0x05C
+#define REG_CHARGEDELAY		0x060
+#define REG_STEPCONFIG(n)	(0x64 + ((n - 1) * 8))
+#define REG_STEPDELAY(n)	(0x68 + ((n - 1) * 8))
+#define REG_FIFO0CNT		0xE4
+#define REG_FIFO0THR		0xE8
+#define REG_FIFO1CNT		0xF0
+#define REG_FIFO1THR		0xF4
+#define REG_FIFO0		0x100
+#define REG_FIFO1		0x200
+
+/*	Register Bitfields	*/
+/* IRQ wakeup enable */
+#define IRQWKUP_ENB		BIT(0)
+
+/* Step Enable */
+#define STEPENB_MASK		(0x1FFFF << 0)
+#define STEPENB(val)		((val) << 0)
+#define STPENB_STEPENB		STEPENB(0x1FFFF)
+
+/* IRQ enable */
+#define IRQENB_HW_PEN		BIT(0)
+#define IRQENB_FIFO0THRES	BIT(2)
+#define IRQENB_FIFO1THRES	BIT(5)
+#define IRQENB_PENUP		BIT(9)
+
+/* Step Configuration */
+#define STEPCONFIG_MODE_MASK	(3 << 0)
+#define STEPCONFIG_MODE(val)	((val) << 0)
+#define STEPCONFIG_MODE_HWSYNC	STEPCONFIG_MODE(2)
+#define STEPCONFIG_AVG_MASK	(7 << 2)
+#define STEPCONFIG_AVG(val)	((val) << 2)
+#define STEPCONFIG_AVG_16	STEPCONFIG_AVG(4)
+#define STEPCONFIG_XPP		BIT(5)
+#define STEPCONFIG_XNN		BIT(6)
+#define STEPCONFIG_YPP		BIT(7)
+#define STEPCONFIG_YNN		BIT(8)
+#define STEPCONFIG_XNP		BIT(9)
+#define STEPCONFIG_YPN		BIT(10)
+#define STEPCONFIG_INM_MASK	(0xF << 15)
+#define STEPCONFIG_INM(val)	((val) << 15)
+#define STEPCONFIG_INM_ADCREFM	STEPCONFIG_INM(8)
+#define STEPCONFIG_INP_MASK	(0xF << 19)
+#define STEPCONFIG_INP(val)	((val) << 19)
+#define STEPCONFIG_INP_AN2	STEPCONFIG_INP(2)
+#define STEPCONFIG_INP_AN3	STEPCONFIG_INP(3)
+#define STEPCONFIG_INP_AN4	STEPCONFIG_INP(4)
+#define STEPCONFIG_INP_ADCREFM	STEPCONFIG_INP(8)
+#define STEPCONFIG_FIFO1	BIT(26)
+
+/* Delay register */
+#define STEPDELAY_OPEN_MASK	(0x3FFFF << 0)
+#define STEPDELAY_OPEN(val)	((val) << 0)
+#define STEPCONFIG_OPENDLY	STEPDELAY_OPEN(0x098)
+#define STEPDELAY_SAMPLE_MASK	(0xFF << 24)
+#define STEPDELAY_SAMPLE(val)	((val) << 24)
+#define STEPCONFIG_SAMPLEDLY	STEPDELAY_SAMPLE(0)
+
+/* Charge Config */
+#define STEPCHARGE_RFP_MASK	(7 << 12)
+#define STEPCHARGE_RFP(val)	((val) << 12)
+#define STEPCHARGE_RFP_XPUL	STEPCHARGE_RFP(1)
+#define STEPCHARGE_INM_MASK	(0xF << 15)
+#define STEPCHARGE_INM(val)	((val) << 15)
+#define STEPCHARGE_INM_AN1	STEPCHARGE_INM(1)
+#define STEPCHARGE_INP_MASK	(0xF << 19)
+#define STEPCHARGE_INP(val)	((val) << 19)
+#define STEPCHARGE_INP_AN1	STEPCHARGE_INP(1)
+#define STEPCHARGE_RFM_MASK	(3 << 23)
+#define STEPCHARGE_RFM(val)	((val) << 23)
+#define STEPCHARGE_RFM_XNUR	STEPCHARGE_RFM(1)
+
+/* Charge delay */
+#define CHARGEDLY_OPEN_MASK	(0x3FFFF << 0)
+#define CHARGEDLY_OPEN(val)	((val) << 0)
+#define CHARGEDLY_OPENDLY	CHARGEDLY_OPEN(1)
+
+/* Control register */
+#define CNTRLREG_TSCSSENB	BIT(0)
+#define CNTRLREG_STEPID		BIT(1)
+#define CNTRLREG_STEPCONFIGWRT	BIT(2)
+#define CNTRLREG_POWERDOWN	BIT(4)
+#define CNTRLREG_AFE_CTRL_MASK	(3 << 5)
+#define CNTRLREG_AFE_CTRL(val)	((val) << 5)
+#define CNTRLREG_4WIRE		CNTRLREG_AFE_CTRL(1)
+#define CNTRLREG_5WIRE		CNTRLREG_AFE_CTRL(2)
+#define CNTRLREG_8WIRE		CNTRLREG_AFE_CTRL(3)
+#define CNTRLREG_TSCENB		BIT(7)
+
+#define ADC_CLK			3000000
+#define	MAX_CLK_DIV		7
+
+#define TSCADC_CELLS		0
+
+struct mfd_tscadc_board {
+	struct tsc_data *tsc_init;
+};
+
+struct ti_tscadc_dev {
+	struct device *dev;
+	struct regmap *regmap_tscadc;
+	void __iomem *tscadc_base;
+	int irq;
+	struct mfd_cell cells[TSCADC_CELLS];
+};
+
+#endif
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists