[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.0-00008-ge6d30a6 (kbuild@bee) (gcc version 4.7.1 (Debian 4.7.1-6) ) #61 SMP PREEMPT Tue Oct 23 20:23:19 CST 2012 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000093bff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000093c00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x100000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdac0-0x000fdacf] mapped at [400fdac0] [ 0.000000] mpc: fdad0-fdbec [ 0.000000] initial memory mapped: [mem 0x00000000-0x023fffff] [ 0.000000] Base memory trampoline at [4008f000] 8f000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x0fffdfff] [ 0.000000] [mem 0x00000000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x0fbfffff] page 2M [ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0xfffdfff @ [mem 0x023f9000-0x023fffff] [ 0.000000] cma: dma_contiguous_reserve(limit 00000000) [ 0.000000] cma: dma_contiguous_reserve: reserving 16 MiB for global area [ 0.000000] cma: dma_declare_contiguous(size 1000000, base 00000000, limit 00000000) [ 0.000000] cma: CMA: reserved 16 MiB at 0d400000 [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 128692(98%) [ 0.000000] RAMDISK: [mem 0x0e73f000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd930 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe550 00038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe590 01121 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 00040 [ 0.000000] ACPI: SSDT 0ffffe40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffffd50 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffffd10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 0ffff6c0 00644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffa000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:199bd81, boot clock [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00010000-0x0fffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x00092fff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65409 [ 0.000000] free_area_init_node: node 0, pgdat 41909ac0, node_mem_map 4e53f200 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 64897 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffa000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffff9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 10 pages/cpu @4e52b000 s25792 r0 d15168 u40960 [ 0.000000] pcpu-alloc: s25792 r0 d15168 u40960 alloc=10*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] kvm-clock: cpu 0, msr 0:e530d81, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr e52d540 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64897 [ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 branch=dynticks/nohz/printk-v2 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=vmlinuz-2012-10-23-20-23-43-dynticks:nohz:printk-v2:e6d30a6-e6d30a6-i386-randconfig-b290-5-bens BOOT_IMAGE=kernel-tests/kernels/i386-randconfig-b290/e6d30a6/vmlinuz-3.6.0-00008-ge6d30a6 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 524144 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 194680k/262136k available (6448k kernel code, 66956k reserved, 2843k data, 552k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffa95000 - 0xfffff000 (5544 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0x507fe000 - 0xff3fe000 (2796 MB) [ 0.000000] lowmem : 0x40000000 - 0x4fffe000 ( 255 MB) [ 0.000000] .init : 0x41913000 - 0x4199d000 ( 552 kB) [ 0.000000] .data : 0x4164c28b - 0x41913000 (2843 kB) [ 0.000000] .text : 0x41000000 - 0x4164c28b (6448 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=4c400000 soft=4c402000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3551 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2666.448 MHz processor [ 0.008000] Calibrating delay loop (skipped) preset value.. 5332.89 BogoMIPS (lpj=10665792) [ 0.008000] pid_max: default: 32768 minimum: 301 [ 0.008027] Security Framework initialized [ 0.008810] SELinux: Initializing. [ 0.009526] SELinux: Starting in enforcing mode [ 0.010412] AppArmor: AppArmor disabled by boot time parameter [ 0.011575] Mount-cache hash table entries: 512 [ 0.012608] Initializing cgroup subsys memory [ 0.013449] Initializing cgroup subsys devices [ 0.014185] Initializing cgroup subsys perf_event [ 0.014956] Initializing cgroup subsys hugetlb [ 0.016152] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.016152] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.016152] tlb_flushall_shift: 6 [ 0.020760] Freeing SMP alternatives: 20k freed [ 0.024639] ACPI: Core revision 20120913 [ 0.026923] Getting VERSION: 50014 [ 0.027494] Getting VERSION: 50014 [ 0.028014] Getting ID: 0 [ 0.028461] Getting ID: f000000 [ 0.028983] Getting LVT0: 8700 [ 0.029493] Getting LVT1: 8400 [ 0.029994] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.031147] enabled ExtINT on CPU#0 [ 0.033280] ENABLING IO-APIC IRQs [ 0.033941] init IO_APIC IRQs [ 0.034439] apic 2 pin 0 not connected [ 0.035085] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.036035] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.037320] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.038630] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.040038] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.041354] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.042645] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.044029] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.045311] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.046590] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.048026] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.049334] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.050636] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.052026] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.053334] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.054638] apic 2 pin 16 not connected [ 0.055276] apic 2 pin 17 not connected [ 0.056008] apic 2 pin 18 not connected [ 0.056663] apic 2 pin 19 not connected [ 0.057321] apic 2 pin 20 not connected [ 0.057954] apic 2 pin 21 not connected [ 0.058629] apic 2 pin 22 not connected [ 0.059281] apic 2 pin 23 not connected [ 0.060184] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.061619] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.064008] Using local APIC timer interrupts. [ 0.064008] calibrating APIC timer ... [ 0.068004] ... lapic delta = 7499968 [ 0.068004] ... PM-Timer delta = 429542 [ 0.068004] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms [ 0.068004] APIC delta adjusted to PM-Timer: 6250014 (7499968) [ 0.068004] TSC delta adjusted to PM-Timer: 266665478 (319996488) [ 0.068004] ..... delta 6250014 [ 0.068004] ..... mult: 268419281 [ 0.068004] ..... calibration result: 4000008 [ 0.068004] ..... CPU clock speed is 2666.2619 MHz. [ 0.068004] ..... host bus clock speed is 1000.0008 MHz. [ 0.068099] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.080248] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.084160] SMP alternatives: lockdep: fixing up alternatives [ 0.085591] CPU 1 irqstacks, hard=4c476000 soft=4c480000 [ 0.086881] smpboot: Booting Node 0, Processors #1 OK [ 0.008000] Initializing CPU#1 [ 0.008000] kvm-clock: cpu 1, msr 0:e53ad81, secondary cpu clock [ 0.008000] masked ExtINT on CPU#1 [ 0.116084] Brought up 2 CPUs [ 0.116059] KVM setup async PF for cpu 1 [ 0.116059] kvm-stealtime: cpu 1, msr e537540 [ 0.120011] smpboot: Total of 2 processors activated (10665.79 BogoMIPS) [ 100.135075] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 100.136047] [ 100.136726] [ 100.137443] sending NMI to all CPUs: [ 100.138022] NMI backtrace for cpu 0 [ 100.138283] Pid: 0, comm: swapper/0 Not tainted 3.6.0-00008-ge6d30a6 #61 Bochs Bochs [ 100.138283] EIP: 0060:[<4101cbcd>] EFLAGS: 00010046 CPU: 0 [ 100.138283] EIP is at default_send_IPI_mask_logical+0x9d/0x120 [ 100.138283] EAX: 00000c00 EBX: 03000000 ECX: fffff000 EDX: fffff000 [ 100.138283] ESI: 00000002 EDI: 00000002 EBP: 41889ea8 ESP: 41889e8c [ 100.138283] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 100.138283] CR0: 8005003b CR2: ffffffff CR3: 019a5000 CR4: 00000690 [ 100.138283] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 100.138283] DR6: ffff0ff0 DR7: 00000400 [ 100.138283] Process swapper/0 (pid: 0, ti=41888000 task=41890e00 task.ti=41888000) [ 100.138283] Stack: [ 100.138283] 00002710 4189bb40 00000001 00000800 00002710 4189bb40 00000001 41889eb8 [ 100.138283] 4101cd60 00002710 4189bb40 41889ec8 4101cf61 417cf9ef 4e52de20 41889f00 [ 100.138283] 4107ed5a 417dcd90 00000000 000061aa 4e52de20 4189bd04 00000002 00000001 [ 100.138283] Call Trace: [ 100.138283] [<4101cd60>] default_send_IPI_all+0x80/0x90 [ 100.138283] [<4101cf61>] arch_trigger_all_cpu_backtrace+0x41/0x70 [ 100.138283] [<4107ed5a>] rcu_check_callbacks+0x4fa/0x540 [ 100.138283] [<41035426>] update_process_times+0x36/0x70 [ 100.138283] [<41061045>] tick_periodic+0x25/0x70 [ 100.138283] [<410610f8>] tick_handle_periodic+0x18/0x70 [ 100.138283] [<4101bcff>] smp_apic_timer_interrupt+0x4f/0x80 [ 100.138283] [<4164b05d>] apic_timer_interrupt+0x2d/0x34 [ 100.138283] [<410219c0>] ? native_irq_enable+0x10/0x10 [ 100.138283] [<4195007b>] ? memblock_dump.isra.8+0x1d/0x117 [ 100.138283] [<410219c5>] ? native_safe_halt+0x5/0x10 [ 100.138283] [<41009e32>] default_idle+0x32/0x60 [ 100.138283] [<4100a878>] cpu_idle+0x68/0xa0 [ 100.138283] [<415fdb3f>] rest_init+0xab/0xbc [ 100.138283] [<415fda94>] ? __read_lock_failed+0x14/0x14 [ 100.138283] [<4191396d>] start_kernel+0x32e/0x334 [ 100.138283] [<41913474>] ? repair_env_string+0x51/0x51 [ 100.138283] [<419132a2>] i386_start_kernel+0x78/0x7d [ 100.138283] Code: 00 b3 ff ff f6 c4 10 75 ed c1 e3 18 89 99 10 b3 ff ff 89 f0 09 d0 80 ce 04 83 fe 02 0f 44 c2 8b 15 a4 71 89 41 89 82 00 b3 ff ff <8b> 1d 5c 70 89 41 85 db 74 3e 89 f8 50 9d 8d 74 26 00 83 c4 10 [ 0.124078] NMI backtrace for cpu 1 [ 0.124078] Pid: 0, comm: swapper/1 Not tainted 3.6.0-00008-ge6d30a6 #61 Bochs Bochs [ 0.124078] EIP: 0060:[<410819ad>] EFLAGS: 00000002 CPU: 1 [ 0.124078] EIP is at irq_work_run+0x5d/0x90 [ 0.124078] EAX: 41897f0c EBX: 00000000 ECX: 4e537fec EDX: 00000000 [ 0.124078] ESI: 41897f10 EDI: 41897f10 EBP: 4c463eec ESP: 4c463ee0 [ 0.124078] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 0.124078] CR0: 8005003b CR2: ffffffff CR3: 019a5000 CR4: 00000690 [ 0.124078] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 0.124078] DR6: ffff0ff0 DR7: 00000400 [ 0.124078] Process swapper/1 (pid: 0, ti=4c462000 task=4c43e840 task.ti=4c462000) [ 0.124078] Stack: [ 0.124078] 4c43e840 00000000 00000001 4c463f00 4103543b 4e537440 4e537440 00000000 [ 0.124078] 4c463f08 41061045 4c463f24 410610f8 00000000 00000001 00000000 4e537440 [ 0.124078] 00000000 4c463f3c 4101bcff 4c43e840 419118c0 419118c0 00000001 4c463f80 [ 0.124078] Call Trace: [ 0.124078] [<4103543b>] update_process_times+0x4b/0x70 [ 0.124078] [<41061045>] tick_periodic+0x25/0x70 [ 0.124078] [<410610f8>] tick_handle_periodic+0x18/0x70 [ 0.124078] [<4101bcff>] smp_apic_timer_interrupt+0x4f/0x80 [ 0.124078] [<4164b05d>] apic_timer_interrupt+0x2d/0x34 [ 0.124078] [<410219c0>] ? native_irq_enable+0x10/0x10 [ 0.124078] [<410600d8>] ? alarmtimer_suspend+0xb8/0x1a0 [ 0.124078] [<410219c5>] ? native_safe_halt+0x5/0x10 [ 0.124078] [<41009e32>] default_idle+0x32/0x60 [ 0.124078] [<4100a878>] cpu_idle+0x68/0xa0 [ 0.124078] [<41639a5d>] start_secondary+0x1d4/0x1db [ 0.124078] Code: 89 41 85 c0 74 48 9c 58 8d 74 26 00 89 c2 81 e2 00 02 00 00 75 36 89 d7 87 39 85 ff 74 27 31 db 8d b6 00 00 00 00 8d 47 fc 8b 37 47 fc 02 00 00 00 ff 57 04 b8 02 00 00 00 f0 0f b1 5f fc 85 [ 100.146845] devtmpfs: initialized [ 100.147970] EVM: security.selinux [ 100.150287] EVM: security.capability [ 100.151379] atomic64 test passed for i586+ platform with CX8 and with SSE [ 100.152683] regulator-dummy: no parameters [ 100.154344] cma: cma_init_reserved_areas() [ 100.155000] cma: cma_create_area(base 0000d400, count 1000) [ 100.158377] cma: cma_create_area: returned 4fff6580 [ 100.159290] NET: Registered protocol family 16 [ 100.160689] EISA bus registered [ 100.161779] ACPI: bus type pci registered [ 100.162544] PCI: PCI BIOS revision 2.10 entry at 0xfc78c, last bus=0 [ 100.163580] PCI: Using configuration type 1 for base access [ 100.182626] ACPI: Added _OSI(Module Device) [ 100.183337] ACPI: Added _OSI(Processor Device) [ 100.184045] ACPI: Added _OSI(3.0 _SCP Extensions) [ 100.184797] ACPI: Added _OSI(Processor Aggregator Device) [ 100.187802] ACPI: EC: Look up EC in DSDT [ 100.195223] ACPI: Interpreter enabled [ 100.195821] ACPI: (supports S0 S5) [ 100.196424] ACPI: Using IOAPIC for interrupt routing [ 100.203488] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 100.205069] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 100.206321] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 100.207510] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 100.208702] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 100.209983] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) [ 100.210300] PCI: root bus 00: using default resources [ 100.211114] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 100.218388] PCI host bridge to bus 0000:00 [ 100.219055] pci_bus 0000:00: root bus resource [bus 00-ff] [ 100.222295] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 100.223285] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 100.226364] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 100.227778] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 100.229368] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 100.234295] pci 0000:00:01.1: reg 20: [io 0xc1c0-0xc1cf] [ 100.239193] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 100.240734] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 100.241890] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 100.242498] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 100.250880] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 100.252980] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff] [ 100.259728] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] [ 100.262525] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 100.264256] pci 0000:00:03.0: reg 10: [mem 0xfeba0000-0xfebbffff] [ 100.266964] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f] [ 100.274967] pci 0000:00:03.0: reg 30: [mem 0xfebc0000-0xfebdffff pref] [ 100.276167] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 100.277908] pci 0000:00:04.0: reg 10: [io 0xc040-0xc07f] [ 100.279001] pci 0000:00:04.0: reg 14: [mem 0xfebf1000-0xfebf1fff] [ 100.285662] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 100.287044] pci 0000:00:05.0: reg 10: [io 0xc080-0xc0bf] [ 100.288591] pci 0000:00:05.0: reg 14: [mem 0xfebf2000-0xfebf2fff] [ 100.298944] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 100.302301] pci 0000:00:06.0: reg 10: [io 0xc0c0-0xc0ff] [ 100.306674] pci 0000:00:06.0: reg 14: [mem 0xfebf3000-0xfebf3fff] [ 100.313074] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 100.314658] pci 0000:00:07.0: reg 10: [io 0xc100-0xc13f] [ 100.316212] pci 0000:00:07.0: reg 14: [mem 0xfebf4000-0xfebf4fff] [ 100.322947] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 100.324659] pci 0000:00:08.0: reg 10: [io 0xc140-0xc17f] [ 100.326202] pci 0000:00:08.0: reg 14: [mem 0xfebf5000-0xfebf5fff] [ 100.335944] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 100.339112] pci 0000:00:09.0: reg 10: [io 0xc180-0xc1bf] [ 100.342301] pci 0000:00:09.0: reg 14: [mem 0xfebf6000-0xfebf6fff] [ 100.346916] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 100.348252] pci 0000:00:0a.0: reg 10: [mem 0xfebf7000-0xfebf700f] [ 100.355948] pci_bus 0000:00: on NUMA node 0 [ 100.356724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 100.358669] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 100.375515] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 100.376673] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 100.377780] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 100.378680] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 100.379774] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0 [ 100.383307] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 100.386311] vgaarb: loaded [ 100.386763] vgaarb: bridge control possible 0000:00:02.0 [ 100.390690] Linux video capture interface: v2.00 [ 100.391546] PCI: Using ACPI for IRQ routing [ 100.394311] PCI: pci_cache_line_size set to 64 bytes [ 100.395460] e820: reserve RAM buffer [mem 0x00093c00-0x0009ffff] [ 100.396419] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 100.398674] NET: Registered protocol family 8 [ 100.402303] NET: Registered protocol family 20 [ 100.414326] cfg80211: Calling CRDA to update world regulatory domain [ 100.416180] Switching to clocksource kvm-clock [ 100.440632] pnp: PnP ACPI init [ 100.441187] ACPI: bus type pnp registered [ 100.441911] pnp 00:00: [bus 00-ff] [ 100.442475] pnp 00:00: [io 0x0cf8-0x0cff] [ 100.443150] pnp 00:00: [io 0x0000-0x0cf7 window] [ 100.443907] pnp 00:00: [io 0x0d00-0xffff window] [ 100.444677] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 100.445552] pnp 00:00: [mem 0xe0000000-0xfebfffff window] [ 100.446467] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 100.447529] pnp 00:01: [io 0x0070-0x0071] [ 100.448191] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 100.457450] pnp 00:01: [irq 8] [ 100.457943] pnp 00:01: [io 0x0072-0x0077] [ 100.458626] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 100.459727] pnp 00:02: [io 0x0060] [ 100.460294] pnp 00:02: [io 0x0064] [ 100.460858] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 100.462136] pnp 00:02: [irq 1] [ 100.462653] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 100.463727] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 100.465024] pnp 00:03: [irq 12] [ 100.472227] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 100.473351] pnp 00:04: [io 0x03f2-0x03f5] [ 100.474027] pnp 00:04: [io 0x03f7] [ 100.474601] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 100.475893] pnp 00:04: [irq 6] [ 100.476389] pnp 00:04: [dma 2] [ 100.476909] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 100.478034] pnp 00:05: [io 0x0378-0x037f] [ 100.478694] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 100.479973] pnp 00:05: [irq 7] [ 100.480493] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 100.481656] pnp 00:06: [io 0x03f8-0x03ff] [ 100.482319] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 100.483595] pnp 00:06: [irq 4] [ 100.484112] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 100.485492] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 100.486304] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 100.487541] pnp: PnP ACPI: found 8 devices [ 100.488197] ACPI: ACPI bus type pnp unregistered [ 100.528359] PM-Timer running at invalid rate: 112% of normal - aborting. [ 100.529521] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 100.530414] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 100.531502] NET: Registered protocol family 2 [ 100.532415] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 100.533693] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 100.535397] TCP: Hash tables configured (established 8192 bind 8192) [ 100.536470] TCP: reno registered [ 100.536996] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 100.538001] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 100.539120] NET: Registered protocol family 1 [ 100.539838] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 100.540788] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 100.550708] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 100.551742] pci 0000:00:02.0: Boot video device [ 100.552587] PCI: CLS 0 bytes, default 64 [ 100.553379] Unpacking initramfs... [ 103.754798] Freeing initrd memory: 25284k freed [ 103.843721] audit: initializing netlink socket (disabled) [ 103.844665] type=2000 audit(1350995228.842:1): initialized [ 103.861819] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 103.864648] fuse init (API version 7.20) [ 103.865535] msgmni has been set to 461 [ 103.875848] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 103.876661] crc32: self tests passed, processed 225944 bytes in 169229 nsec [ 103.877946] crc32c: CRC_LE_BITS = 64 [ 103.878514] crc32c: self tests passed, processed 225944 bytes in 84427 nsec [ 103.879717] xz_dec_test: module loaded [ 103.880319] xz_dec_test: Create a device node with 'mknod xz_dec_test c 253 0' and write .xz files to it. [ 103.911880] rivafb_setup START [ 103.912431] nvidiafb_setup START [ 103.912984] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 103.914218] vmlfb: initializing [ 103.914862] hgafb: HGA card not detected. [ 103.915527] hgafb: probe of hgafb.0 failed with error -22 [ 103.921807] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 103.923024] ACPI: Power Button [PWRF] [ 103.973611] isapnp: Scanning for PnP cards... [ 104.615449] isapnp: No Plug & Play device found [ 104.658707] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 104.659607] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 104.692194] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 104.693791] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 104.694961] ac.o: No PCI boards found. [ 104.695610] ac.o: For an ISA board you must supply memory and irq parameters. [ 104.696814] Non-volatile memory driver v1.3 [ 104.697509] ppdev: user-space parallel port driver [ 104.698329] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 104.699494] platform pc8736x_gpio.0: no device found [ 104.700302] nsc_gpio initializing [ 104.700894] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 104.701762] ipmi message handler version 39.2 [ 104.702481] IPMI Watchdog: driver initialized [ 104.703187] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 104.704555] [drm:drm_core_init] *ERROR* Cannot create /proc/dri [ 104.705531] [drm] radeon defaulting to kernel modesetting. [ 104.706418] [drm] radeon kernel modesetting enabled. [ 104.707604] [drm:drm_proc_init] *ERROR* Cannot create /proc/dri/0 [ 104.708571] [drm:drm_get_minor] *ERROR* DRM: Failed to initialize /proc/dri. [ 104.709839] cirrus: probe of 0000:00:02.0 failed with error -1 [ 104.728128] parport_pc 00:05: reported by Plug and Play ACPI [ 104.729227] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 104.828100] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 104.829254] Phantom Linux Driver, version n0.9.8, init OK [ 104.830208] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 104.831738] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 104.832949] device id = 2440 [ 104.833418] device id = 2480 [ 104.834254] device id = 24c0 [ 104.834730] device id = 24d0 [ 104.835200] device id = 25a1 [ 104.835686] device id = 2670 [ 104.836191] Failed to ioremap_nocache [ 104.836804] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 104.874648] No recognised DiskOnChip devices found [ 104.875414] slram: not enough parameters. [ 104.876076] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 104.877269] pmc551: not detected [ 104.877910] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 104.879389] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 104.880887] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 104.882375] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 104.883865] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 104.885345] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 104.892831] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit), page size: 512, OOB size: 16 [ 104.894629] flash size: 128 MiB [ 104.895143] page size: 512 bytes [ 104.895676] OOB area size: 16 bytes [ 104.896234] sector size: 16 KiB [ 104.896747] pages number: 262144 [ 104.897263] pages per sector: 32 [ 104.897802] bus width: 8 [ 104.898213] bits in sector size: 14 [ 104.898775] bits in page size: 9 [ 104.899293] bits in OOB size: 4 [ 104.899816] flash size with OOB: 135168 KiB [ 104.900481] page address bytes: 4 [ 104.901019] sector address bytes: 3 [ 104.901575] options: 0x42 [ 104.905903] Scanning device for bad blocks [ 104.944264] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 104.945267] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 104.997742] onenand_wait: timeout! ctrl=0x0000 intr=0x0000 [ 104.998674] OneNAND Manufacturer: Samsung (0xec) [ 104.999413] OneNAND 16MB 1.8V 16-bit (0x04) [ 105.000081] OneNAND version = 0x001e [ 105.000661] Lock scheme is Continuous Lock [ 105.001326] Scanning device for bad blocks [ 105.002574] Creating 1 MTD partitions on "OneNAND simulator": [ 105.003496] 0x000000000000-0x000001000000 : "OneNAND simulator partition" [ 105.004857] parport0: powerup/reset Butterfly [ 105.088616] tsc: Refined TSC clocksource calibration: 2666.662 MHz [ 105.120739] parport_pc 00:05: registered master spi42 [ 105.121565] parport_pc 00:05: master is unqueued, this is deprecated [ 105.122588] spi spi42.1: spi_bitbang_setup, 66 nsec/bit [ 105.123435] spi spi42.1: setup mode 0, 8 bits/w, 15000000 Hz max --> 0 [ 105.125668] parport_pc 00:05: registered child spi42.1 [ 105.126488] parport0: dataflash at spi42.1 [ 105.127141] parport0: AVR Butterfly [ 105.127784] slcan: serial line CAN interface driver [ 105.128567] slcan: 10 dynamic interface channels. [ 105.129318] AX.25: Z8530 SCC driver version 3.0.dl1bke [ 105.130271] AX.25: 6pack driver, Revision: 0.3.0 [ 105.131019] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 105.131019] baycom_ser_hdx: version 0.10 [ 105.133031] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [ 105.133955] hdlcdrv: version 0.8 [ 105.134475] baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA [ 105.134475] baycom_epp: version 0.7 [ 105.145997] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 105.148266] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 105.149137] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 105.243349] mousedev: PS/2 mouse device common for all mice [ 105.254036] logibm.c: Didn't find Logitech busmouse at 0x23c [ 105.255120] mk712: device not present [ 105.255878] rtc_cmos 00:01: RTC can wake from S4 [ 105.256873] rtc (null): alarm rollover: day [ 105.257659] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 105.258785] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 105.270005] rtc-test rtc-test.0: rtc core: registered test as rtc1 [ 105.271075] rtc-test rtc-test.1: rtc core: registered test as rtc2 [ 105.272254] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 105.274731] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 105.388102] i2c-parport: adapter type unspecified [ 105.388873] i2c-parport-light: adapter type unspecified [ 105.389995] Driver for 1-wire Dallas network protocol. [ 105.390936] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 106.107925] i2c i2c-0: detect fail: address match, 0x2c [ 106.123907] i2c i2c-0: detect fail: address match, 0x2d [ 106.139931] i2c i2c-0: detect fail: address match, 0x2e [ 106.155945] i2c i2c-0: detect fail: address match, 0x2f [ 106.339963] applesmc: supported laptop not found! [ 106.340743] applesmc: driver init failed (ret=-19)! [ 112.996578] pc87360: PC8736x not detected, module not inserted [ 113.236807] acquirewdt: WDT driver for Acquire single board computer initialising [ 113.238110] acquirewdt: I/O address 0x0043 already in use [ 113.238977] acquirewdt: probe of acquirewdt failed with error -5 [ 113.239936] alim7101_wdt: Steve Hill [ 113.240812] alim7101_wdt: ALi M7101 PMU not present - WDT not set [ 113.241845] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01 [ 113.242979] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=0) [ 113.244146] ib700wdt: WDT driver for IB700 single board computer initialising [ 113.245358] ib700wdt: failed to register misc device [ 113.246175] ib700wdt: probe of ib700wdt failed with error -16 [ 113.247121] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 113.248034] iTCO_vendor_support: vendor-support=0 [ 113.248882] pc87413_wdt: Version 1.1 at io 0x2E [ 113.252757] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 113.253782] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 113.254775] w83627hf_wdt: WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising [ 113.259405] w83627hf_wdt: Watchdog already running. Resetting timeout to 60 sec [ 113.260616] w83627hf_wdt: cannot register miscdev on minor=130 (err=-16) [ 113.270170] w83697ug_wdt: WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising [ 113.271602] w83697ug_wdt: No W83697UG/UF could be found [ 113.272442] w83877f_wdt: cannot register miscdev on minor=130 (err=-16) [ 113.273488] w83977f_wdt: driver v1.00 [ 113.274084] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 113.275211] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16) [ 113.276286] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16). [ 113.277581] watchdog: Software Watchdog: a legacy watchdog module is probably present. [ 113.292978] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 113.294772] Modular ISDN core version 1.1.29 [ 113.295568] NET: Registered protocol family 34 [ 113.296236] mISDN: Layer-1-over-IP driver Rev. 2.00 [ 113.316853] 0 virtual devices registered [ 113.317516] mISDN: HFC-multi driver 2.03 [ 113.318193] Winbond W6692 PCI driver Rev. 2.0 [ 113.318932] cpufreq-nforce2: No nForce2 chipset. [ 113.319691] cpuidle: using governor ladder [ 113.320526] leds_ss4200: no LED devices found [ 113.330774] rdma_ucm: couldn't register sysctl paths [ 113.367106] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 113.368438] NET: Registered protocol family 26 [ 113.369176] gre: GRE over IPv4 demultiplexor driver [ 113.369969] IPv4 over IPSec tunneling driver [ 113.370841] TCP: cubic registered [ 113.371383] Initializing XFRM netlink socket [ 113.372140] NET: Registered protocol family 15 [ 113.392617] NET: Registered protocol family 4 [ 113.393724] NET: Registered protocol family 6 [ 113.394453] NET: Registered protocol family 3 [ 113.395178] can: controller area network core (rev 20120528 abi 9) [ 113.396200] can: failed to create /proc/net/can . CONFIG_PROC_FS missing? [ 113.397295] NET: Registered protocol family 29 [ 113.404072] can: broadcast manager protocol (rev 20120528 t) [ 113.405016] NET: Registered protocol family 33 [ 113.405740] Key type rxrpc registered [ 113.406329] Key type rxrpc_s registered [ 113.407008] 8021q: 802.1Q VLAN Support v1.8 [ 113.407708] lib80211: common routines for IEEE802.11 drivers [ 113.408634] lib80211_crypt: registered algorithm 'NULL' [ 113.409487] 9pnet: Installing 9P2000 support [ 113.410217] NET: Registered protocol family 37 [ 113.410957] NET: Registered protocol family 36 [ 113.411696] Key type ceph registered [ 113.412276] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 113.442741] batman_adv: B.A.T.M.A.N. advanced 2012.4.0 (compatibility version 14) loaded [ 113.444474] [ 113.444474] printing PIC contents [ 113.445257] ... PIC IMR: ffff [ 113.445759] ... PIC IRR: 1113 [ 113.446261] ... PIC ISR: 0000 [ 113.446765] ... PIC ELCR: 0c00 [ 113.447262] printing local APIC contents on CPU#0/0: [ 113.448379] ... APIC ID: 00000000 (0) [ 113.448379] ... APIC VERSION: 00050014 [ 113.448379] ... APIC TASKPRI: 00000000 (00) [ 113.448379] ... APIC PROCPRI: 00000000 [ 113.448379] ... APIC LDR: 01000000 [ 113.448379] ... APIC DFR: ffffffff [ 113.448379] ... APIC SPIV: 000001ff [ 113.448379] ... APIC ISR field: [ 113.448379] 0000000000000000000000000000000000000000000000000000000000000000 [ 113.448379] ... APIC TMR field: [ 113.448379] 0000000000000000000000000000000000000000000000000000000000000000 [ 113.448379] ... APIC IRR field: [ 113.448379] 0000000000000000000000000000000000000000000000000000000000008000 [ 113.448379] ... APIC ESR: 00000000 [ 113.448379] ... APIC ICR: 000008fd [ 113.448379] ... APIC ICR2: 02000000 [ 113.448379] ... APIC LVTT: 000200ef [ 113.448379] ... APIC LVTPC: 00010000 [ 113.448379] ... APIC LVT0: 00010700 [ 113.448379] ... APIC LVT1: 00000400 [ 113.448379] ... APIC LVTERR: 000000fe [ 113.448379] ... APIC TMICT: 0003d090 [ 113.448379] ... APIC TMCCT: 00010438 [ 113.448379] ... APIC TDCR: 00000003 [ 113.448379] [ 113.484737] number of MP IRQ sources: 15. [ 113.485380] number of IO-APIC #2 registers: 24. [ 113.486104] testing the IO APIC....................... [ 113.486964] IO APIC #2...... [ 113.487432] .... register #00: 00000000 [ 113.488045] ....... : physical APIC id: 00 [ 113.488752] ....... : Delivery Type: 0 [ 113.489387] ....... : LTS : 0 [ 113.490026] .... register #01: 00170011 [ 113.490639] ....... : max redirection entries: 17 [ 113.501388] ....... : PRQ implemented: 0 [ 113.502078] ....... : IO APIC version: 11 [ 113.502791] .... register #02: 00000000 [ 113.503397] ....... : arbitration: 00 [ 113.504034] .... IRQ redirection table: [ 113.504661] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 113.505537] 00 00 1 0 0 0 0 0 0 00 [ 113.506399] 01 03 0 0 0 0 0 1 1 31 [ 113.507282] 02 03 0 0 0 0 0 1 1 30 [ 113.508144] 03 03 0 0 0 0 0 1 1 33 [ 113.509019] 04 03 1 0 0 0 0 1 1 34 [ 113.509880] 05 03 1 1 0 0 0 1 1 35 [ 113.520700] 06 03 0 0 0 0 0 1 1 36 [ 113.521555] 07 03 0 0 0 0 0 1 1 37 [ 113.522417] 08 03 0 0 0 0 0 1 1 38 [ 113.523293] 09 03 0 1 0 0 0 1 1 39 [ 113.524154] 0a 03 1 1 0 0 0 1 1 3A [ 113.525031] 0b 03 1 1 0 0 0 1 1 3B [ 113.525893] 0c 03 0 0 0 0 0 1 1 3C [ 113.526789] 0d 03 0 0 0 0 0 1 1 3D [ 113.527630] 0e 03 0 0 0 0 0 1 1 3E [ 113.528494] 0f 03 0 0 0 0 0 1 1 3F [ 113.529356] 10 00 1 0 0 0 0 0 0 00 [ 113.530217] 11 00 1 0 0 0 0 0 0 00 [ 113.541018] 12 00 1 0 0 0 0 0 0 00 [ 113.541885] 13 00 1 0 0 0 0 0 0 00 [ 113.542791] 14 00 1 0 0 0 0 0 0 00 [ 113.543639] 15 00 1 0 0 0 0 0 0 00 [ 113.545097] 16 00 1 0 0 0 0 0 0 00 [ 113.546912] 17 00 1 0 0 0 0 0 0 00 [ 113.551003] IRQ to pin mappings: [ 113.551527] IRQ0 -> 0:2 [ 113.551979] IRQ1 -> 0:1 [ 113.552432] IRQ3 -> 0:3 [ 113.552884] IRQ4 -> 0:4 [ 113.553329] IRQ5 -> 0:5 [ 113.553785] IRQ6 -> 0:6 [ 113.554231] IRQ7 -> 0:7 [ 113.554684] IRQ8 -> 0:8 [ 113.555143] IRQ9 -> 0:9 [ 113.555583] IRQ10 -> 0:10 [ 113.556058] IRQ11 -> 0:11 [ 113.556539] IRQ12 -> 0:12 [ 113.557015] IRQ13 -> 0:13 [ 113.557486] IRQ14 -> 0:14 [ 113.557964] IRQ15 -> 0:15 [ 113.558434] .................................... done. [ 113.564931] Using IPI No-Shortcut mode [ 113.595993] Key type trusted registered [ 113.596857] Key type encrypted registered [ 113.597721] IMA: No TPM chip found, activating TPM-bypass! [ 113.599425] rtc_cmos 00:01: setting system clock to 2012-10-23 12:27:30 UTC (1350995250) [ 113.616807] Freeing unused kernel memory: 552k freed /bin/sh: /proc/self/fd/9: No such file or directory /bin/sh: /proc/self/fd/9: No such file or directory /bin/sh: /proc/self/fd/9: No such file or directory