| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 2 Nov 2012 10:38:43 -0600
From: Bjorn Helgaas <bhelgaas@...gle.com>
To: Huang Ying <ying.huang@...el.com>
Cc: linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
linux-pm@...r.kernel.org, "Rafael J. Wysocki" <rjw@...k.pl>,
stable@...r.kernel.org
Subject: Re: [BUGFIX] PCI/PM: Fix proc config reg access for D3cold and bridge suspending
On Wed, Oct 24, 2012 at 7:36 PM, Huang Ying <ying.huang@...el.com> wrote:
> In
>
> https://bugzilla.kernel.org/show_bug.cgi?id=48981
>
> Peter reported that /proc/bus/pci/??/??.? does not works for 3.6.
> This is This is because the device configuration space registers will
> be not accessible if the corresponding parent bridge is suspended or
> the device is put into D3cold state.
>
> This is the same as /sys/bus/pci/devices/0000:??:??.?/config access
> issue. So the function used to solve sysfs issue is used to solve
> this issue.
>
> Cc: stable@...r.kernel.org
> Reported-by: Peter <lekensteyn@...il.com>
Is this bug the same as the one originally reported by Forrest Loomis
(original reporter of bug 48981)? And
https://bugzilla.kernel.org/show_bug.cgi?id=49031, reported by Micael
Dias (Rafael marked 49031 as a duplicate of 48981)?
If so, I'll mention Forrest and Micael and bug 49031 here as well.
> Signed-off-by: Huang Ying <ying.huang@...el.com>
> ---
> drivers/pci/pci-sysfs.c | 34 ----------------------------------
> drivers/pci/pci.c | 32 ++++++++++++++++++++++++++++++++
> drivers/pci/pci.h | 2 ++
> drivers/pci/proc.c | 8 ++++++++
> 4 files changed, 42 insertions(+), 34 deletions(-)
>
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -458,40 +458,6 @@ boot_vga_show(struct device *dev, struct
> }
> struct device_attribute vga_attr = __ATTR_RO(boot_vga);
>
> -static void
> -pci_config_pm_runtime_get(struct pci_dev *pdev)
> -{
> - struct device *dev = &pdev->dev;
> - struct device *parent = dev->parent;
> -
> - if (parent)
> - pm_runtime_get_sync(parent);
> - pm_runtime_get_noresume(dev);
> - /*
> - * pdev->current_state is set to PCI_D3cold during suspending,
> - * so wait until suspending completes
> - */
> - pm_runtime_barrier(dev);
> - /*
> - * Only need to resume devices in D3cold, because config
> - * registers are still accessible for devices suspended but
> - * not in D3cold.
> - */
> - if (pdev->current_state == PCI_D3cold)
> - pm_runtime_resume(dev);
> -}
> -
> -static void
> -pci_config_pm_runtime_put(struct pci_dev *pdev)
> -{
> - struct device *dev = &pdev->dev;
> - struct device *parent = dev->parent;
> -
> - pm_runtime_put(dev);
> - if (parent)
> - pm_runtime_put_sync(parent);
> -}
> -
> static ssize_t
> pci_read_config(struct file *filp, struct kobject *kobj,
> struct bin_attribute *bin_attr,
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -1858,6 +1858,38 @@ bool pci_dev_run_wake(struct pci_dev *de
> }
> EXPORT_SYMBOL_GPL(pci_dev_run_wake);
>
> +void pci_config_pm_runtime_get(struct pci_dev *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device *parent = dev->parent;
> +
> + if (parent)
> + pm_runtime_get_sync(parent);
> + pm_runtime_get_noresume(dev);
> + /*
> + * pdev->current_state is set to PCI_D3cold during suspending,
> + * so wait until suspending completes
> + */
> + pm_runtime_barrier(dev);
> + /*
> + * Only need to resume devices in D3cold, because config
> + * registers are still accessible for devices suspended but
> + * not in D3cold.
> + */
> + if (pdev->current_state == PCI_D3cold)
> + pm_runtime_resume(dev);
> +}
> +
> +void pci_config_pm_runtime_put(struct pci_dev *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device *parent = dev->parent;
> +
> + pm_runtime_put(dev);
> + if (parent)
> + pm_runtime_put_sync(parent);
> +}
> +
> /**
> * pci_pm_init - Initialize PM functions of given PCI device
> * @dev: PCI device to handle.
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -72,6 +72,8 @@ extern void pci_disable_enabled_device(s
> extern int pci_finish_runtime_suspend(struct pci_dev *dev);
> extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
> extern void pci_wakeup_bus(struct pci_bus *bus);
> +extern void pci_config_pm_runtime_get(struct pci_dev *dev);
> +extern void pci_config_pm_runtime_put(struct pci_dev *dev);
> extern void pci_pm_init(struct pci_dev *dev);
> extern void platform_pci_wakeup_init(struct pci_dev *dev);
> extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
> --- a/drivers/pci/proc.c
> +++ b/drivers/pci/proc.c
> @@ -76,6 +76,8 @@ proc_bus_pci_read(struct file *file, cha
> if (!access_ok(VERIFY_WRITE, buf, cnt))
> return -EINVAL;
>
> + pci_config_pm_runtime_get(dev);
> +
> if ((pos & 1) && cnt) {
> unsigned char val;
> pci_user_read_config_byte(dev, pos, &val);
> @@ -121,6 +123,8 @@ proc_bus_pci_read(struct file *file, cha
> cnt--;
> }
>
> + pci_config_pm_runtime_put(dev);
> +
> *ppos = pos;
> return nbytes;
> }
> @@ -146,6 +150,8 @@ proc_bus_pci_write(struct file *file, co
> if (!access_ok(VERIFY_READ, buf, cnt))
> return -EINVAL;
>
> + pci_config_pm_runtime_get(dev);
> +
> if ((pos & 1) && cnt) {
> unsigned char val;
> __get_user(val, buf);
> @@ -191,6 +197,8 @@ proc_bus_pci_write(struct file *file, co
> cnt--;
> }
>
> + pci_config_pm_runtime_put(dev);
> +
> *ppos = pos;
> i_size_write(ino, dp->size);
> return nbytes;
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists