| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 12 Nov 2012 12:30:30 +0100 (CET)
From: Guennadi Liakhovetski <g.liakhovetski@....de>
To: Laxman Dewangan <ldewangan@...dia.com>
cc: sameo@...ux.intel.com, broonie@...nsource.wolfsonmicro.com,
lrg@...com, linux-kernel@...r.kernel.org
Subject: Re: [PATCH V3 1/2] mfd: add TI TPS80031 mfd core driver
Hi Laxman
Thanks for submitting these paches! A couple of minor comments below.
On Sun, 11 Nov 2012, Laxman Dewangan wrote:
> TPS80031/ TPS80032 Fully Integrated Power Management with Power
> Path and Battery Charger. The device provides five configurable
> step-down converters, 11 general purpose LDOs, USB OTG Module,
> ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
> Power Path from USB, 32K clock generator.
>
> Add the mfd core driver for TPS80031/TPS80032.
>
> Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
> ---
> Changes from V1:
> - remove the volatle api.
> - add regmap irq regardless of client->irq.
> - Correct the irq cleanups.
> - remove usage of irq_base.
> - remove suspend/resume
> - Correct acroym and ES nomenclature.
>
> Changes from V2:
> - Merged regulator specific header file change on this patch.
>
> drivers/mfd/Kconfig | 14 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/tps80031.c | 545 ++++++++++++++++++++++++++++++++++++
> include/linux/mfd/tps80031.h | 632 ++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 1192 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mfd/tps80031.c
> create mode 100644 include/linux/mfd/tps80031.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 637bcdf..a1caf81 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -244,6 +244,20 @@ config MFD_TPS65912_SPI
> If you say yes here you get support for the TPS65912 series of
> PM chips with SPI interface.
>
> +config MFD_TPS80031
> + bool "TI TPS80031/TPS80032 Power Management chips"
> + depends on I2C && GENERIC_HARDIRQS
> + select MFD_CORE
> + select REGMAP_I2C
> + select IRQ_DOMAIN
> + help
> + If you say yes here you get support for the Texas Instruments
> + TPS80031/ TPS80032 Fully Integrated Power Management with Power
> + Path and Battery Charger. The device provides five configurable
> + step-down converters, 11 general purpose LDOs, USB OTG Module,
> + ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
> + Power Path from USB, 32K clock generator.
> +
> config MENELAUS
> bool "Texas Instruments TWL92330/Menelaus PM chip"
> depends on I2C=y && ARCH_OMAP2
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 296817c..3595f2d 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -57,6 +57,7 @@ tps65912-objs := tps65912-core.o tps65912-irq.o
> obj-$(CONFIG_MFD_TPS65912) += tps65912.o
> obj-$(CONFIG_MFD_TPS65912_I2C) += tps65912-i2c.o
> obj-$(CONFIG_MFD_TPS65912_SPI) += tps65912-spi.o
> +obj-$(CONFIG_MFD_TPS80031) += tps80031.o
> obj-$(CONFIG_MENELAUS) += menelaus.o
>
> obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
> diff --git a/drivers/mfd/tps80031.c b/drivers/mfd/tps80031.c
> new file mode 100644
> index 0000000..55088e7
> --- /dev/null
> +++ b/drivers/mfd/tps80031.c
> @@ -0,0 +1,545 @@
> +/*
> + * tps80031-regulator.c -- TI TPS80031/TPS80032 mfd core driver.
Looks like a copy-paste to me:-)
> + *
> + * MFD core driver for TI TPS80031/TPS80032 Fully Integrated
> + * Power Management with Power Path and Battery Charger
> + *
> + * Copyright (c) 2012, NVIDIA Corporation.
> + *
> + * Author: Laxman Dewangan <ldewangan@...dia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
> + * whether express or implied; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
> + * 02111-1307, USA
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/tps80031.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
mutex.h doesn't seem to be needed?
> +#include <linux/pm.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
[snip]
> +static int __devinit tps80031_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct tps80031_platform_data *pdata = client->dev.platform_data;
> + struct tps80031 *tps80031;
> + int ret;
> + uint8_t es_version;
> + uint8_t ep_ver;
> + int i;
> +
> + if (!pdata) {
> + dev_err(&client->dev, "tps80031 requires platform data\n");
> + return -EINVAL;
> + }
> +
> + tps80031 = devm_kzalloc(&client->dev, sizeof(*tps80031), GFP_KERNEL);
> + if (!tps80031) {
> + dev_err(&client->dev, "Malloc failed for tps80031\n");
> + return -ENOMEM;
> + }
> +
> + for (i = 0; i < TPS_NUM_SLAVES; i++) {
> + if (tps80031_slave_address[i] == client->addr)
> + tps80031->clients[i] = client;
> + else
> + tps80031->clients[i] = i2c_new_dummy(client->adapter,
> + tps80031_slave_address[i]);
> + if (!tps80031->clients[i]) {
> + dev_err(&client->dev, "can't attach client %d\n", i);
> + ret = -ENOMEM;
> + goto fail_client_reg;
> + }
> +
> + i2c_set_clientdata(tps80031->clients[i], tps80031);
> + tps80031->regmap[i] = devm_regmap_init_i2c(tps80031->clients[i],
> + &tps80031_regmap_configs[i]);
> + if (IS_ERR(tps80031->regmap[i])) {
> + ret = PTR_ERR(tps80031->regmap[i]);
> + dev_err(&client->dev,
> + "regmap %d init failed, err %d\n", i, ret);
> + goto fail_client_reg;
> + }
> + }
> +
> + ret = tps80031_read(&client->dev, SLAVE_ID3, TPS80031_JTAGVERNUM,
> + &es_version);
> + if (ret < 0) {
> + dev_err(&client->dev,
> + "Silicon version number read failed: %d\n", ret);
> + goto fail_client_reg;
> + }
> +
> + ret = tps80031_read(&client->dev, SLAVE_ID3, TPS80031_EPROM_REV,
> + &ep_ver);
> + if (ret < 0) {
> + dev_err(&client->dev,
> + "Silicon eeprom version read failed: %d\n", ret);
> + goto fail_client_reg;
> + }
> +
> + dev_info(&client->dev, "ES version 0x%02x and EPROM version 0x%02x\n",
> + es_version, ep_ver);
> + tps80031->es_version = es_version;
> + tps80031->dev = &client->dev;
> + i2c_set_clientdata(client, tps80031);
> + tps80031->chip_info = id->driver_data;
> +
> + ret = tps80031_irq_init(tps80031, client->irq, pdata->irq_base);
> + if (ret) {
> + dev_err(&client->dev, "IRQ init failed: %d\n", ret);
> + goto fail_client_reg;
> + }
> +
> + tps80031_pupd_init(tps80031, pdata);
> +
> + tps80031_init_ext_control(tps80031, pdata);
> +
> + ret = mfd_add_devices(tps80031->dev, -1,
> + tps80031_cell, ARRAY_SIZE(tps80031_cell),
> + NULL, 0,
> + regmap_irq_get_domain(tps80031->irq_data));
> + if (ret < 0) {
> + dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret);
> + goto fail_mfd_add;
> + }
> +
> + if (pdata->use_power_off && !pm_power_off) {
> + pm_power_off = tps80031_power_off;
> + tps80031_power_off_dev = tps80031;
This is probably just a theoretical possibility, but after you have
assigned pm_power_off above, it can already be called, whereas
tps80031_power_off_dev is not yet set at that time. Wouldn't it be better
to swap the two assignments?
> + }
> + return 0;
> +
> +fail_mfd_add:
> + regmap_del_irq_chip(client->irq, tps80031->irq_data);
> +
> +fail_client_reg:
> + for (i = 0; i < TPS_NUM_SLAVES; i++) {
> + if (tps80031->clients[i] != client)
This "if" will also be entered for slaves, for which the initialisation
loop didn't run or failed, in which case tps80031->clients[i] == NULL, and
i2c_unregister_device() would Oops. Should this be
+ if (tps80031->clients[i] && tps80031->clients[i] != client)
instead?
> + i2c_unregister_device(tps80031->clients[i]);
> + }
> + return ret;
> +}
> +
> +static int __devexit tps80031_remove(struct i2c_client *client)
> +{
> + struct tps80031 *tps80031 = i2c_get_clientdata(client);
> + int i;
Don't you have to set pm_power_off to NULL again, if it was set to
tps80031_power_off?
> +
> + mfd_remove_devices(tps80031->dev);
> +
> + regmap_del_irq_chip(client->irq, tps80031->irq_data);
> +
> + for (i = 0; i < TPS_NUM_SLAVES; i++) {
> + if (tps80031->clients[i] != client)
> + i2c_unregister_device(tps80031->clients[i]);
> + }
> + return 0;
> +}
> +
> +static const struct i2c_device_id tps80031_id_table[] = {
> + { "tps80031", TPS80031 },
> + { "tps80032", TPS80032 },
> +};
> +MODULE_DEVICE_TABLE(i2c, tps80031_id_table);
> +
> +static struct i2c_driver tps80031_driver = {
> + .driver = {
> + .name = "tps80031",
> + .owner = THIS_MODULE,
> + },
> + .probe = tps80031_probe,
> + .remove = __devexit_p(tps80031_remove),
> + .id_table = tps80031_id_table,
> +};
> +
> +static int __init tps80031_init(void)
> +{
> + return i2c_add_driver(&tps80031_driver);
> +}
> +subsys_initcall(tps80031_init);
> +
> +static void __exit tps80031_exit(void)
> +{
> + i2c_del_driver(&tps80031_driver);
> +}
> +module_exit(tps80031_exit);
> +
> +MODULE_AUTHOR("Laxman Dewangan <ldewangan@...dia.com>");
> +MODULE_DESCRIPTION("TPS80031 core driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/tps80031.h b/include/linux/mfd/tps80031.h
> new file mode 100644
> index 0000000..b8e1b4e
> --- /dev/null
> +++ b/include/linux/mfd/tps80031.h
> @@ -0,0 +1,632 @@
> +/*
> + * tps80031.c -- TI TPS80031 and TI TPS80032 PMIC driver.
name typo
> + *
> + * Copyright (c) 2012, NVIDIA Corporation.
> + *
> + * Author: Laxman Dewangan <ldewangan@...dia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
> + * whether express or implied; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
> + * 02111-1307, USA
> + */
> +
> +#ifndef __LINUX_MFD_TPS80031_H
> +#define __LINUX_MFD_TPS80031_H
> +
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +
> +/* Pull-ups/Pull-downs */
> +#define TPS80031_CFG_INPUT_PUPD1 0xF0
> +#define TPS80031_CFG_INPUT_PUPD2 0xF1
> +#define TPS80031_CFG_INPUT_PUPD3 0xF2
> +#define TPS80031_CFG_INPUT_PUPD4 0xF3
> +#define TPS80031_CFG_LDO_PD1 0xF4
> +#define TPS80031_CFG_LDO_PD2 0xF5
> +#define TPS80031_CFG_SMPS_PD 0xF6
> +
> +/* Real Time Clock */
> +#define TPS80031_SECONDS_REG 0x00
> +#define TPS80031_MINUTES_REG 0x01
> +#define TPS80031_HOURS_REG 0x02
> +#define TPS80031_DAYS_REG 0x03
> +#define TPS80031_MONTHS_REG 0x04
> +#define TPS80031_YEARS_REG 0x05
> +#define TPS80031_WEEKS_REG 0x06
> +#define TPS80031_ALARM_SECONDS_REG 0x08
> +#define TPS80031_ALARM_MINUTES_REG 0x09
> +#define TPS80031_ALARM_HOURS_REG 0x0A
> +#define TPS80031_ALARM_DAYS_REG 0x0B
> +#define TPS80031_ALARM_MONTHS_REG 0x0C
> +#define TPS80031_ALARM_YEARS_REG 0x0D
> +#define TPS80031_RTC_CTRL_REG 0x10
> +#define TPS80031_RTC_STATUS_REG 0x11
> +#define TPS80031_RTC_INTERRUPTS_REG 0x12
> +#define TPS80031_RTC_COMP_LSB_REG 0x13
> +#define TPS80031_RTC_COMP_MSB_REG 0x14
> +#define TPS80031_RTC_RESET_STATUS_REG 0x16
> +
> +/*PMC Master Module */
> +#define TPS80031_PHOENIX_START_CONDITION 0x1F
> +#define TPS80031_PHOENIX_MSK_TRANSITION 0x20
> +#define TPS80031_STS_HW_CONDITIONS 0x21
> +#define TPS80031_PHOENIX_LAST_TURNOFF_STS 0x22
> +#define TPS80031_VSYSMIN_LO_THRESHOLD 0x23
> +#define TPS80031_VSYSMIN_HI_THRESHOLD 0x24
> +#define TPS80031_PHOENIX_DEV_ON 0x25
> +#define TPS80031_STS_PWR_GRP_STATE 0x27
> +#define TPS80031_PH_CFG_VSYSLOW 0x28
> +#define TPS80031_PH_STS_BOOT 0x29
> +#define TPS80031_PHOENIX_SENS_TRANSITION 0x2A
> +#define TPS80031_PHOENIX_SEQ_CFG 0x2B
> +#define TPS80031_PRIMARY_WATCHDOG_CFG 0X2C
> +#define TPS80031_KEY_PRESS_DUR_CFG 0X2D
> +#define TPS80031_SMPS_LDO_SHORT_STS 0x2E
> +
> +/* PMC Slave Module - Broadcast */
> +#define TPS80031_BROADCAST_ADDR_ALL 0x31
> +#define TPS80031_BROADCAST_ADDR_REF 0x32
> +#define TPS80031_BROADCAST_ADDR_PROV 0x33
> +#define TPS80031_BROADCAST_ADDR_CLK_RST 0x34
> +
> +/* PMC Slave Module SMPS Regulators */
> +#define TPS80031_SMPS4_CFG_TRANS 0x41
> +#define TPS80031_SMPS4_CFG_STATE 0x42
> +#define TPS80031_SMPS4_CFG_VOLTAGE 0x44
> +#define TPS80031_VIO_CFG_TRANS 0x47
> +#define TPS80031_VIO_CFG_STATE 0x48
> +#define TPS80031_VIO_CFG_FORCE 0x49
> +#define TPS80031_VIO_CFG_VOLTAGE 0x4A
> +#define TPS80031_VIO_CFG_STEP 0x48
> +#define TPS80031_SMPS1_CFG_TRANS 0x53
> +#define TPS80031_SMPS1_CFG_STATE 0x54
> +#define TPS80031_SMPS1_CFG_FORCE 0x55
> +#define TPS80031_SMPS1_CFG_VOLTAGE 0x56
> +#define TPS80031_SMPS1_CFG_STEP 0x57
> +#define TPS80031_SMPS2_CFG_TRANS 0x59
> +#define TPS80031_SMPS2_CFG_STATE 0x5A
> +#define TPS80031_SMPS2_CFG_FORCE 0x5B
> +#define TPS80031_SMPS2_CFG_VOLTAGE 0x5C
> +#define TPS80031_SMPS2_CFG_STEP 0x5D
> +#define TPS80031_SMPS3_CFG_TRANS 0x65
> +#define TPS80031_SMPS3_CFG_STATE 0x66
> +#define TPS80031_SMPS3_CFG_VOLTAGE 0x68
> +
> +/* PMC Slave Module LDO Regulators */
> +#define TPS80031_VANA_CFG_TRANS 0x81
> +#define TPS80031_VANA_CFG_STATE 0x82
> +#define TPS80031_VANA_CFG_VOLTAGE 0x83
> +#define TPS80031_LDO2_CFG_TRANS 0x85
> +#define TPS80031_LDO2_CFG_STATE 0x86
> +#define TPS80031_LDO2_CFG_VOLTAGE 0x87
> +#define TPS80031_LDO4_CFG_TRANS 0x89
> +#define TPS80031_LDO4_CFG_STATE 0x8A
> +#define TPS80031_LDO4_CFG_VOLTAGE 0x8B
> +#define TPS80031_LDO3_CFG_TRANS 0x8D
> +#define TPS80031_LDO3_CFG_STATE 0x8E
> +#define TPS80031_LDO3_CFG_VOLTAGE 0x8F
> +#define TPS80031_LDO6_CFG_TRANS 0x91
> +#define TPS80031_LDO6_CFG_STATE 0x92
> +#define TPS80031_LDO6_CFG_VOLTAGE 0x93
> +#define TPS80031_LDOLN_CFG_TRANS 0x95
> +#define TPS80031_LDOLN_CFG_STATE 0x96
> +#define TPS80031_LDOLN_CFG_VOLTAGE 0x97
> +#define TPS80031_LDO5_CFG_TRANS 0x99
> +#define TPS80031_LDO5_CFG_STATE 0x9A
> +#define TPS80031_LDO5_CFG_VOLTAGE 0x9B
> +#define TPS80031_LDO1_CFG_TRANS 0x9D
> +#define TPS80031_LDO1_CFG_STATE 0x9E
> +#define TPS80031_LDO1_CFG_VOLTAGE 0x9F
> +#define TPS80031_LDOUSB_CFG_TRANS 0xA1
> +#define TPS80031_LDOUSB_CFG_STATE 0xA2
> +#define TPS80031_LDOUSB_CFG_VOLTAGE 0xA3
> +#define TPS80031_LDO7_CFG_TRANS 0xA5
> +#define TPS80031_LDO7_CFG_STATE 0xA6
> +#define TPS80031_LDO7_CFG_VOLTAGE 0xA7
> +
> +/* PMC Slave Module External Control */
> +#define TPS80031_REGEN1_CFG_TRANS 0xAE
> +#define TPS80031_REGEN1_CFG_STATE 0xAF
> +#define TPS80031_REGEN2_CFG_TRANS 0xB1
> +#define TPS80031_REGEN2_CFG_STATE 0xB2
> +#define TPS80031_SYSEN_CFG_TRANS 0xB4
> +#define TPS80031_SYSEN_CFG_STATE 0xB5
> +
> +/* PMC Slave Module Internal Control */
> +#define TPS80031_NRESPWRON_CFG_TRANS 0xB7
> +#define TPS80031_NRESPWRON_CFG_STATE 0xB8
> +#define TPS80031_CLK32KAO_CFG_TRANS 0xBA
> +#define TPS80031_CLK32KAO_CFG_STATE 0xBB
> +#define TPS80031_CLK32KG_CFG_TRANS 0xBD
> +#define TPS80031_CLK32KG_CFG_STATE 0xBE
> +#define TPS80031_CLK32KAUDIO_CFG_TRANS 0xC0
> +#define TPS80031_CLK32KAUDIO_CFG_STATE 0xC1
> +#define TPS80031_VRTC_CFG_TRANS 0xC3
> +#define TPS80031_VRTC_CFG_STATE 0xC4
> +#define TPS80031_BIAS_CFG_TRANS 0xC6
> +#define TPS80031_BIAS_CFG_STATE 0xC7
> +#define TPS80031_VSYSMIN_HI_CFG_TRANS 0xC9
> +#define TPS80031_VSYSMIN_HI_CFG_STATE 0xCA
> +#define TPS80031_RC6MHZ_CFG_TRANS 0xCC
> +#define TPS80031_RC6MHZ_CFG_STATE 0xCD
> +#define TPS80031_TMP_CFG_TRANS 0xCF
> +#define TPS80031_TMP_CFG_STATE 0xD0
> +
> +/* PMC Slave Module resources assignment */
> +#define TPS80031_PREQ1_RES_ASS_A 0xD7
> +#define TPS80031_PREQ1_RES_ASS_B 0xD8
> +#define TPS80031_PREQ1_RES_ASS_C 0xD9
> +#define TPS80031_PREQ2_RES_ASS_A 0xDA
> +#define TPS80031_PREQ2_RES_ASS_B 0xDB
> +#define TPS80031_PREQ2_RES_ASS_C 0xDC
> +#define TPS80031_PREQ3_RES_ASS_A 0xDD
> +#define TPS80031_PREQ3_RES_ASS_B 0xDE
> +#define TPS80031_PREQ3_RES_ASS_C 0xDF
> +
> +/* PMC Slave Module Miscellaneous */
> +#define TPS80031_SMPS_OFFSET 0xE0
> +#define TPS80031_SMPS_MULT 0xE3
> +#define TPS80031_MISC1 0xE4
> +#define TPS80031_MISC2 0xE5
> +#define TPS80031_BBSPOR_CFG 0xE6
> +#define TPS80031_TMP_CFG 0xE7
> +
> +/* Battery Charging Controller and Indicator LED */
> +#define TPS80031_CONTROLLER_CTRL2 0xDA
> +#define TPS80031_CONTROLLER_VSEL_COMP 0xDB
> +#define TPS80031_CHARGERUSB_VSYSREG 0xDC
> +#define TPS80031_CHARGERUSB_VICHRG_PC 0xDD
> +#define TPS80031_LINEAR_CHRG_STS 0xDE
> +#define TPS80031_CONTROLLER_INT_MASK 0xE0
> +#define TPS80031_CONTROLLER_CTRL1 0xE1
> +#define TPS80031_CONTROLLER_WDG 0xE2
> +#define TPS80031_CONTROLLER_STAT1 0xE3
> +#define TPS80031_CHARGERUSB_INT_STATUS 0xE4
> +#define TPS80031_CHARGERUSB_INT_MASK 0xE5
> +#define TPS80031_CHARGERUSB_STATUS_INT1 0xE6
> +#define TPS80031_CHARGERUSB_STATUS_INT2 0xE7
> +#define TPS80031_CHARGERUSB_CTRL1 0xE8
> +#define TPS80031_CHARGERUSB_CTRL2 0xE9
> +#define TPS80031_CHARGERUSB_CTRL3 0xEA
> +#define TPS80031_CHARGERUSB_STAT1 0xEB
> +#define TPS80031_CHARGERUSB_VOREG 0xEC
> +#define TPS80031_CHARGERUSB_VICHRG 0xED
> +#define TPS80031_CHARGERUSB_CINLIMIT 0xEE
> +#define TPS80031_CHARGERUSB_CTRLLIMIT1 0xEF
> +#define TPS80031_CHARGERUSB_CTRLLIMIT2 0xF0
> +#define TPS80031_LED_PWM_CTRL1 0xF4
> +#define TPS80031_LED_PWM_CTRL2 0xF5
> +
> +/* USB On-The-Go */
> +#define TPS80031_BACKUP_REG 0xFA
> +#define TPS80031_USB_VENDOR_ID_LSB 0x00
> +#define TPS80031_USB_VENDOR_ID_MSB 0x01
> +#define TPS80031_USB_PRODUCT_ID_LSB 0x02
> +#define TPS80031_USB_PRODUCT_ID_MSB 0x03
> +#define TPS80031_USB_VBUS_CTRL_SET 0x04
> +#define TPS80031_USB_VBUS_CTRL_CLR 0x05
> +#define TPS80031_USB_ID_CTRL_SET 0x06
> +#define TPS80031_USB_ID_CTRL_CLR 0x07
> +#define TPS80031_USB_VBUS_INT_SRC 0x08
> +#define TPS80031_USB_VBUS_INT_LATCH_SET 0x09
> +#define TPS80031_USB_VBUS_INT_LATCH_CLR 0x0A
> +#define TPS80031_USB_VBUS_INT_EN_LO_SET 0x0B
> +#define TPS80031_USB_VBUS_INT_EN_LO_CLR 0x0C
> +#define TPS80031_USB_VBUS_INT_EN_HI_SET 0x0D
> +#define TPS80031_USB_VBUS_INT_EN_HI_CLR 0x0E
> +#define TPS80031_USB_ID_INT_SRC 0x0F
> +#define TPS80031_USB_ID_INT_LATCH_SET 0x10
> +#define TPS80031_USB_ID_INT_LATCH_CLR 0x11
> +#define TPS80031_USB_ID_INT_EN_LO_SET 0x12
> +#define TPS80031_USB_ID_INT_EN_LO_CLR 0x13
> +#define TPS80031_USB_ID_INT_EN_HI_SET 0x14
> +#define TPS80031_USB_ID_INT_EN_HI_CLR 0x15
> +#define TPS80031_USB_OTG_ADP_CTRL 0x16
> +#define TPS80031_USB_OTG_ADP_HIGH 0x17
> +#define TPS80031_USB_OTG_ADP_LOW 0x18
> +#define TPS80031_USB_OTG_ADP_RISE 0x19
> +#define TPS80031_USB_OTG_REVISION 0x1A
> +
> +/* Gas Gauge */
> +#define TPS80031_FG_REG_00 0xC0
> +#define TPS80031_FG_REG_01 0xC1
> +#define TPS80031_FG_REG_02 0xC2
> +#define TPS80031_FG_REG_03 0xC3
> +#define TPS80031_FG_REG_04 0xC4
> +#define TPS80031_FG_REG_05 0xC5
> +#define TPS80031_FG_REG_06 0xC6
> +#define TPS80031_FG_REG_07 0xC7
> +#define TPS80031_FG_REG_08 0xC8
> +#define TPS80031_FG_REG_09 0xC9
> +#define TPS80031_FG_REG_10 0xCA
> +#define TPS80031_FG_REG_11 0xCB
> +
> +/* General Purpose ADC */
> +#define TPS80031_GPADC_CTRL 0x2E
> +#define TPS80031_GPADC_CTRL2 0x2F
> +#define TPS80031_RTSELECT_LSB 0x32
> +#define TPS80031_RTSELECT_ISB 0x33
> +#define TPS80031_RTSELECT_MSB 0x34
> +#define TPS80031_GPSELECT_ISB 0x35
> +#define TPS80031_CTRL_P1 0x36
> +#define TPS80031_RTCH0_LSB 0x37
> +#define TPS80031_RTCH0_MSB 0x38
> +#define TPS80031_RTCH1_LSB 0x39
> +#define TPS80031_RTCH1_MSB 0x3A
> +#define TPS80031_GPCH0_LSB 0x3B
> +#define TPS80031_GPCH0_MSB 0x3C
> +
> +/* SIM, MMC and Battery Detection */
> +#define TPS80031_SIMDEBOUNCING 0xEB
> +#define TPS80031_SIMCTRL 0xEC
> +#define TPS80031_MMCDEBOUNCING 0xED
> +#define TPS80031_MMCCTRL 0xEE
> +#define TPS80031_BATDEBOUNCING 0xEF
> +
> +/* Vibrator Driver and PWMs */
> +#define TPS80031_VIBCTRL 0x9B
> +#define TPS80031_VIBMODE 0x9C
> +#define TPS80031_PWM1ON 0xBA
> +#define TPS80031_PWM1OFF 0xBB
> +#define TPS80031_PWM2ON 0xBD
> +#define TPS80031_PWM2OFF 0xBE
> +
> +/* Control Interface */
> +#define TPS80031_INT_STS_A 0xD0
> +#define TPS80031_INT_STS_B 0xD1
> +#define TPS80031_INT_STS_C 0xD2
> +#define TPS80031_INT_MSK_LINE_A 0xD3
> +#define TPS80031_INT_MSK_LINE_B 0xD4
> +#define TPS80031_INT_MSK_LINE_C 0xD5
> +#define TPS80031_INT_MSK_STS_A 0xD6
> +#define TPS80031_INT_MSK_STS_B 0xD7
> +#define TPS80031_INT_MSK_STS_C 0xD8
> +#define TPS80031_TOGGLE1 0x90
> +#define TPS80031_TOGGLE2 0x91
> +#define TPS80031_TOGGLE3 0x92
> +#define TPS80031_PWDNSTATUS1 0x93
> +#define TPS80031_PWDNSTATUS2 0x94
> +#define TPS80031_VALIDITY0 0x17
> +#define TPS80031_VALIDITY1 0x18
> +#define TPS80031_VALIDITY2 0x19
> +#define TPS80031_VALIDITY3 0x1A
> +#define TPS80031_VALIDITY4 0x1B
> +#define TPS80031_VALIDITY5 0x1C
> +#define TPS80031_VALIDITY6 0x1D
> +#define TPS80031_VALIDITY7 0x1E
> +
> +/* Version number related register */
> +#define TPS80031_JTAGVERNUM 0x87
> +#define TPS80031_EPROM_REV 0xDF
> +
> +/* GPADC Trimming Bits. */
> +#define TPS80031_GPADC_TRIM0 0xCC
> +#define TPS80031_GPADC_TRIM1 0xCD
> +#define TPS80031_GPADC_TRIM2 0xCE
> +#define TPS80031_GPADC_TRIM3 0xCF
> +#define TPS80031_GPADC_TRIM4 0xD0
> +#define TPS80031_GPADC_TRIM5 0xD1
> +#define TPS80031_GPADC_TRIM6 0xD2
> +#define TPS80031_GPADC_TRIM7 0xD3
> +#define TPS80031_GPADC_TRIM8 0xD4
> +#define TPS80031_GPADC_TRIM9 0xD5
> +#define TPS80031_GPADC_TRIM10 0xD6
> +#define TPS80031_GPADC_TRIM11 0xD7
> +#define TPS80031_GPADC_TRIM12 0xD8
> +#define TPS80031_GPADC_TRIM13 0xD9
> +#define TPS80031_GPADC_TRIM14 0xDA
> +#define TPS80031_GPADC_TRIM15 0xDB
> +#define TPS80031_GPADC_TRIM16 0xDC
> +#define TPS80031_GPADC_TRIM17 0xDD
> +#define TPS80031_GPADC_TRIM18 0xDE
> +
> +/* TPS80031_CONTROLLER_STAT1 bit fields */
> +#define CONTROLLER_STAT1_BAT_TEMP 0
> +#define CONTROLLER_STAT1_BAT_REMOVED 1
> +#define CONTROLLER_STAT1_VBUS_DET 2
> +#define CONTROLLER_STAT1_VAC_DET 3
> +#define CONTROLLER_STAT1_FAULT_WDG 4
> +#define CONTROLLER_STAT1_LINCH_GATED 6
> +/* TPS80031_CONTROLLER_INT_MASK bit filed */
> +#define CONTROLLER_INT_MASK_MVAC_DET 0
> +#define CONTROLLER_INT_MASK_MVBUS_DET 1
> +#define CONTROLLER_INT_MASK_MBAT_TEMP 2
> +#define CONTROLLER_INT_MASK_MFAULT_WDG 3
> +#define CONTROLLER_INT_MASK_MBAT_REMOVED 4
> +#define CONTROLLER_INT_MASK_MLINCH_GATED 5
> +
> +#define CHARGE_CONTROL_SUB_INT_MASK 0x3F
> +
> +/* TPS80031_PHOENIX_DEV_ON bit field */
> +#define DEVOFF 0x1
This header is going to be included by other drivers for various tps80031
functions, so, I think, it is better to avoid names with a high conflict
probability like "DEVOFF" and use the TPS80031_ prefix consistently for
all symbols in the header. In fact, DEVOFF is not used in patch 2/2, only
in 1/2, it also looks like it's not going to be interesting for any other
functions, so, maybe just define in .c or even just use the numeric value
directly.
> +
> +#define EXT_CONTROL_CFG_TRANS 0
> +#define EXT_CONTROL_CFG_STATE 1
> +
> +/* State register field */
> +#define STATE_OFF 0x00
> +#define STATE_ON 0x01
> +#define STATE_MASK 0x03
> +
> +/* Trans register field */
> +#define TRANS_ACTIVE_OFF 0x00
> +#define TRANS_ACTIVE_ON 0x01
> +#define TRANS_ACTIVE_MASK 0x03
> +#define TRANS_SLEEP_OFF 0x00
> +#define TRANS_SLEEP_ON 0x04
> +#define TRANS_SLEEP_MASK 0x0C
> +#define TRANS_OFF_OFF 0x00
> +#define TRANS_OFF_ACTIVE 0x10
> +#define TRANS_OFF_MASK 0x30
> +
> +#define EXT_PWR_REQ (PWR_REQ_INPUT_PREQ1 | PWR_REQ_INPUT_PREQ2 | \
> + PWR_REQ_INPUT_PREQ3)
Ditto for the above defines, "STATE_ON" is really pretty generic.
> +
> +/* TPS80031_BBSPOR_CFG bit field */
> +#define TPS80031_BBSPOR_CHG_EN 0x8
> +#define TPS80031_MAX_REGISTER 0xFF
> +
> +/* Supported chips */
> +enum chips {
> + TPS80031 = 0x00000001,
> + TPS80032 = 0x00000002,
> +};
> +
> +enum {
> + TPS80031_INT_PWRON,
> + TPS80031_INT_RPWRON,
> + TPS80031_INT_SYS_VLOW,
> + TPS80031_INT_RTC_ALARM,
> + TPS80031_INT_RTC_PERIOD,
> + TPS80031_INT_HOT_DIE,
> + TPS80031_INT_VXX_SHORT,
> + TPS80031_INT_SPDURATION,
> + TPS80031_INT_WATCHDOG,
> + TPS80031_INT_BAT,
> + TPS80031_INT_SIM,
> + TPS80031_INT_MMC,
> + TPS80031_INT_RES,
> + TPS80031_INT_GPADC_RT,
> + TPS80031_INT_GPADC_SW2_EOC,
> + TPS80031_INT_CC_AUTOCAL,
> + TPS80031_INT_ID_WKUP,
> + TPS80031_INT_VBUSS_WKUP,
> + TPS80031_INT_ID,
> + TPS80031_INT_VBUS,
> + TPS80031_INT_CHRG_CTRL,
> + TPS80031_INT_EXT_CHRG,
> + TPS80031_INT_INT_CHRG,
> + TPS80031_INT_RES2,
> + TPS80031_INT_BAT_TEMP_OVRANGE,
> + TPS80031_INT_BAT_REMOVED,
> + TPS80031_INT_VBUS_DET,
> + TPS80031_INT_VAC_DET,
> + TPS80031_INT_FAULT_WDG,
> + TPS80031_INT_LINCH_GATED,
> +
> + /* Last interrupt id to get the end number */
> + TPS80031_INT_NR,
> +};
> +
> +#define TPS_NUM_SLAVES 4
> +#define SLAVE_ID0 0
> +#define SLAVE_ID1 1
> +#define SLAVE_ID2 2
> +#define SLAVE_ID3 3
> +
> +#define I2C_ID0_ADDR 0x12
> +#define I2C_ID1_ADDR 0x48
> +#define I2C_ID2_ADDR 0x49
> +#define I2C_ID3_ADDR 0x4A
Ditto for the above defines. In general, I would really only place symbols
here, that have to be used by function drivers.
> +
> +enum {
> + TPS80031_REGULATOR_VIO,
> + TPS80031_REGULATOR_SMPS1,
> + TPS80031_REGULATOR_SMPS2,
> + TPS80031_REGULATOR_SMPS3,
> + TPS80031_REGULATOR_SMPS4,
> + TPS80031_REGULATOR_VANA,
> + TPS80031_REGULATOR_LDO1,
> + TPS80031_REGULATOR_LDO2,
> + TPS80031_REGULATOR_LDO3,
> + TPS80031_REGULATOR_LDO4,
> + TPS80031_REGULATOR_LDO5,
> + TPS80031_REGULATOR_LDO6,
> + TPS80031_REGULATOR_LDO7,
> + TPS80031_REGULATOR_LDOLN,
> + TPS80031_REGULATOR_LDOUSB,
> + TPS80031_REGULATOR_VBUS,
> + TPS80031_REGULATOR_REGEN1,
> + TPS80031_REGULATOR_REGEN2,
> + TPS80031_REGULATOR_SYSEN,
> + TPS80031_REGULATOR_MAX,
> +};
> +
> +/* Different configurations for the rails */
> +enum {
> + /* USBLDO input selection */
> + USBLDO_INPUT_VSYS = 0x00000001,
> + USBLDO_INPUT_PMID = 0x00000002,
> +
> + /* LDO3 output mode */
> + LDO3_OUTPUT_VIB = 0x00000004,
> +
> + /* VBUS configuration */
> + VBUS_DISCHRG_EN_PDN = 0x00000004,
> + VBUS_SW_ONLY = 0x00000008,
> + VBUS_SW_N_ID = 0x00000010,
> +};
> +
> +/* External controls requests */
> +enum tps80031_ext_control {
> + PWR_REQ_INPUT_NONE = 0x00000000,
> + PWR_REQ_INPUT_PREQ1 = 0x00000001,
> + PWR_REQ_INPUT_PREQ2 = 0x00000002,
> + PWR_REQ_INPUT_PREQ3 = 0x00000004,
> + PWR_OFF_ON_SLEEP = 0x00000008,
> + PWR_ON_ON_SLEEP = 0x00000010,
> +};
> +
> +enum tps80031_pupd_pins {
> + TPS80031_PREQ1 = 0,
> + TPS80031_PREQ2A,
> + TPS80031_PREQ2B,
> + TPS80031_PREQ2C,
> + TPS80031_PREQ3,
> + TPS80031_NRES_WARM,
> + TPS80031_PWM_FORCE,
> + TPS80031_CHRG_EXT_CHRG_STATZ,
> + TPS80031_SIM,
> + TPS80031_MMC,
> + TPS80031_GPADC_START,
> + TPS80031_DVSI2C_SCL,
> + TPS80031_DVSI2C_SDA,
> + TPS80031_CTLI2C_SCL,
> + TPS80031_CTLI2C_SDA,
> +};
> +
> +enum tps80031_pupd_settings {
> + TPS80031_PUPD_NORMAL,
> + TPS80031_PUPD_PULLDOWN,
> + TPS80031_PUPD_PULLUP,
> +};
> +
> +struct tps80031 {
> + struct device *dev;
Need to forward-declare struct device.
> + unsigned long chip_info;
> + int es_version;
> + struct i2c_client *clients[TPS_NUM_SLAVES];
I think, you can drop i2c.h and just forward-declare struct i2c_client too.
> + struct regmap *regmap[TPS_NUM_SLAVES];
> + struct regmap_irq_chip_data *irq_data;
> +};
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists