linux-kernel - Re: [PATCH 2/5] Input: bu21013_ts - Move GPIO init and exit functions into the driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 22 Nov 2012 11:28:36 +0000
From:	Lee Jones <lee.jones@...aro.org>
To:	Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc:	linux-kernel@...r.kernel.org, linux-input@...r.kernel.org
Subject: Re: [PATCH 2/5] Input: bu21013_ts - Move GPIO init and exit
 functions into the driver

On Wed, 21 Nov 2012, Dmitry Torokhov wrote:

> Hi Lee,
> 
> On Wed, Nov 14, 2012 at 01:47:14PM +0000, Lee Jones wrote:
> > @@ -272,6 +276,60 @@ static irqreturn_t bu21013_gpio_irq(int irq, void *device_data)
> >  }
> >  
> >  /**
> > + * bu21013_gpio_board_init() - configures the touch panel
> > + * @reset_pin: reset pin number
> > + *
> > + * This function is used to configure the voltage and
> > + * reset the touch panel controller.
> > + */
> > +static int bu21013_gpio_board_init(int reset_pin)
> > +{
> > +	int retval = 0;
> > +
> > +	bu21013_devices++;
> > +	if (bu21013_devices == 1) {
> 
> This does not make sense. If gpio is per-device now then we should
> simply set it up and not count devices.

No problem. I'll fixup.

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/