linux-kernel - RE: Supermicro X9SRL-F - channel enumeration error & ACPI/firmware bug question

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 29 Nov 2012 03:55:33 -0500
From:	"Justin Piszcz" <jpiszcz@...idpixels.com>
To:	"'Robert Hancock'" <hancockrwd@...il.com>
Cc:	"'Bjorn Helgaas'" <bhelgaas@...gle.com>,
	'Bruno Prémont' <bonbons@...ux-vserver.org>,
	<support@...ermicro.com>, <linux-kernel@...r.kernel.org>,
	"'Dan Williams'" <djbw@...com>
Subject: RE: Supermicro X9SRL-F - channel enumeration error & ACPI/firmware bug question



-----Original Message-----
From: Robert Hancock [mailto:hancockrwd@...il.com] 
Sent: Wednesday, November 28, 2012 7:55 PM
To: Justin Piszcz
Cc: Bjorn Helgaas; Bruno Prémont; support@...ermicro.com;
linux-kernel@...r.kernel.org; Dan Williams
Subject: Re: Supermicro X9SRL-F - channel enumeration error & ACPI/firmware
bug question

On Wed, Nov 28, 2012 at 6:49 PM, Justin Piszcz <jpiszcz@...idpixels.com>
wrote:
>
>
> -----Original Message-----
> From: Robert Hancock [mailto:hancockrwd@...il.com]
> Sent: Wednesday, November 28, 2012 7:35 PM
> To: Justin Piszcz
> Cc: 'Bjorn Helgaas'; 'Bruno Prémont'; support@...ermicro.com;
> linux-kernel@...r.kernel.org; 'Dan Williams'
> Subject: Re: Supermicro X9SRL-F - channel enumeration error &
ACPI/firmware
> bug question
>
>
> What does lspci -vv show on that controller? Not sure what actual
> chipset that controller is, but there's a known issue with some Marvell
> 6Gbps SATA controllers with DMAR enabled - it seems the device issues
> memory read/write requests from the wrong PCI function ID and the IOMMU
> rightly denies access as the function listed in the requests doesn't
> have any mapping to that memory. I don't think there's presently a
> workaround other than disabling DMAR. We could (and likely should) be
> detecting that device and adding some kind of quirk for it.
>
> That sounds likely...
> It is shown below:
>
> Card name: HighPoint Rocket 620 Dual Port SATA 6 Gbps PCI Express 2.0 Host
> Adapter
>
> lspci -vv output:
>
> 84:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9123 PCIe SATA
> 6.0 Gb/s controller (rev 11) (prog-if 01 [AHCI 1.0])
>   Subsystem: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s
> controller

Yeah, that's one of those controllers I think. But I can't tell from
the bit of the dmesg you posted exactly what's going on. Can you post
a full boot log from having the card installed and some drive attached
(by putting the boot drive on another controller for example)?

>> ==> Further issues with the X9SRL-F -- does this board support ASPM or is
>> this a Linux/ASPM implementation issue?
>> [    0.632170]  pci0000:ff: ACPI _OSC support notification failed,
> disabling
>> PCIe ASPM
>> [    0.632239]  pci0000:ff: Unable to request _OSC control (_OSC support
>> mask: 0x08)
>
> What's the full dmesg from this machine (or is it already posted
somewhere)?
>
> It is now available here:
> http://home.comcast.net/~jpiszcz/20121128/dmesg.txt

> Is that the same boot log? It doesn't have this error in it.

Yes, the error is here: (its towards the bottom)

 [    7.973015] ata14.00: qc timeout (cmd 0xa1)
[    8.472120] ata14.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[    9.275922] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   19.260667] ata14.00: qc timeout (cmd 0xa1)
[   19.759828] ata14.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   19.760451] ata14: limiting SATA link speed to 1.5 Gbps
[   20.566598] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   50.521078] ata14.00: qc timeout (cmd 0xa1)
[   51.020880] ata14.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   51.824664] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   51.824682] dmar: DRHD: handling fault status reg 502
[   51.824686] dmar: DMAR:[DMA Read] Request device [04:00.0] fault addr 0 
[   51.824686] DMAR:[fault reason 06] PTE Read access is not set
[   52.338871] EXT3-fs (sdb2): error: couldn't mount because of unsupported
optional features (240)
[   52.348938] EXT2-fs (sdb2): error: couldn't mount because of unsupported
optional features (240)
[   52.360314] EXT4-fs (sdb2): mounted filesystem with ordered data mode.
Opts: (null)

The system does not boot when the SSD is on that SATA controller.
The error we were trying to get earlier (kernel panic)-- I cannot reproduce
that anymore after adding nouveau for whatever reason.
So to re-cap it boots now with nothing connected to the controller but the
controller is non-workable/useless, as shown above.
When you put the SSD on it, it cannot mount rootfs.

Justin.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/