| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 17 Dec 2012 15:30:31 +0530
From: Sachin Kamat <sachin.kamat@...aro.org>
To: Jingoo Han <jg1.han@...sung.com>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
LKML <linux-kernel@...r.kernel.org>,
Richard Purdie <rpurdie@...ys.net>
Subject: Re: PATCH] backlight: add lms501kf03 LCD driver
Hi Jingoo,
I had already submitted a patch for adding support for this driver [1]
and you had also provided your review comments on them ([2] and [3]).
There were certain comments from Andrew Morton that needed to be addressed
which I could not due to some other priorities.
IMO, it would be better to address comments on that driver rather than
posting a new (similar) driver altogether.
[1] http://marc.info/?l=linux-fbdev&m=133455903202255&w=4
[2] http://marc.info/?l=linux-fbdev&m=133574414215045&w=4
[3] http://marc.info/?l=linux-fbdev&m=133576237619447&w=4
On 17 December 2012 13:52, Jingoo Han <jg1.han@...sung.com> wrote:
> Add the lms501kf03 LCD panel driver. The lms501kf03 LCD panel (800
> x 480) driver uses 3-wired SPI inteface.
>
> Signed-off-by: Ilho Lee <Ilho215.lee@...sung.com>
> Signed-off-by: Jingoo Han <jg1.han@...sung.com>
> ---
> drivers/video/backlight/Kconfig | 8 +
> drivers/video/backlight/Makefile | 1 +
> drivers/video/backlight/lms501kf03.c | 448 ++++++++++++++++++++++++++++++++++
> 3 files changed, 457 insertions(+), 0 deletions(-)
> create mode 100644 drivers/video/backlight/lms501kf03.c
>
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 765a945..081d6cf 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -126,6 +126,14 @@ config LCD_AMS369FG06
> If you have an AMS369FG06 AMOLED Panel, say Y to enable its
> LCD control driver.
>
> +config LCD_LMS501KF03
> + tristate "LMS501KF03 LCD Driver"
> + depends on SPI
> + default n
> + help
> + If you have an LMS501KF03 LCD Panel, say Y to enable its
> + LCD control driver.
> +
> endif # LCD_CLASS_DEVICE
>
> #
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index e7ce729..d02a728 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
> obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o
> obj-$(CONFIG_LCD_LD9040) += ld9040.o
> obj-$(CONFIG_LCD_AMS369FG06) += ams369fg06.o
> +obj-$(CONFIG_LCD_LMS501KF03) += lms501kf03.o
>
> obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
> obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
> diff --git a/drivers/video/backlight/lms501kf03.c b/drivers/video/backlight/lms501kf03.c
> new file mode 100644
> index 0000000..c30ea53
> --- /dev/null
> +++ b/drivers/video/backlight/lms501kf03.c
> @@ -0,0 +1,448 @@
> +/*
> + * lms501kf03 TFT LCD panel driver.
> + *
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * Author: Jingoo Han <jg1.han@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/fb.h>
> +#include <linux/gpio.h>
> +#include <linux/lcd.h>
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +#include <linux/wait.h>
> +
> +#define ENDDEF 0xff00
> +#define COMMAND_ONLY 0x00
> +#define DATA_ONLY 0x01
> +
> +struct lms501kf03 {
> + struct device *dev;
> + struct spi_device *spi;
> + unsigned int power;
> + struct lcd_device *ld;
> + struct lcd_platform_data *lcd_pd;
> +};
> +
> +static const unsigned short seq_password[] = {
> + 0xb9, 0xff, 0x83, 0x69,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_power[] = {
> + 0xb1, 0x01, 0x00, 0x34, 0x06, 0x00, 0x14, 0x14, 0x20, 0x28,
> + 0x12, 0x12, 0x17, 0x0a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_display[] = {
> + 0xb2, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00, 0xff, 0x00, 0x00,
> + 0x00, 0x00, 0x03, 0x03, 0x00, 0x01,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_rgb_if[] = {
> + 0xb3, 0x09,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_display_inv[] = {
> + 0xb4, 0x01, 0x08, 0x77, 0x0e, 0x06,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_vcom[] = {
> + 0xb6, 0x4c, 0x2e,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_gate[] = {
> + 0xd5, 0x00, 0x05, 0x03, 0x29, 0x01, 0x07, 0x17, 0x68, 0x13,
> + 0x37, 0x20, 0x31, 0x8a, 0x46, 0x9b, 0x57, 0x13, 0x02, 0x75,
> + 0xb9, 0x64, 0xa8, 0x07, 0x0f, 0x04, 0x07,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_panel[] = {
> + 0xcc, 0x02,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_col_mod[] = {
> + 0x3a, 0x77,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_w_gamma[] = {
> + 0xe0, 0x00, 0x04, 0x09, 0x0f, 0x1f, 0x3f, 0x1f, 0x2f, 0x0a,
> + 0x0f, 0x10, 0x16, 0x18, 0x16, 0x17, 0x0d, 0x15, 0x00, 0x04,
> + 0x09, 0x0f, 0x38, 0x3f, 0x20, 0x39, 0x0a, 0x0f, 0x10, 0x16,
> + 0x18, 0x16, 0x17, 0x0d, 0x15,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_rgb_gamma[] = {
> + 0xc1, 0x01, 0x03, 0x07, 0x0f, 0x1a, 0x22, 0x2c, 0x33, 0x3c,
> + 0x46, 0x4f, 0x58, 0x60, 0x69, 0x71, 0x79, 0x82, 0x89, 0x92,
> + 0x9a, 0xa1, 0xa9, 0xb1, 0xb9, 0xc1, 0xc9, 0xcf, 0xd6, 0xde,
> + 0xe5, 0xec, 0xf3, 0xf9, 0xff, 0xdd, 0x39, 0x07, 0x1c, 0xcb,
> + 0xab, 0x5f, 0x49, 0x80, 0x03, 0x07, 0x0f, 0x19, 0x20, 0x2a,
> + 0x31, 0x39, 0x42, 0x4b, 0x53, 0x5b, 0x63, 0x6b, 0x73, 0x7b,
> + 0x83, 0x8a, 0x92, 0x9b, 0xa2, 0xaa, 0xb2, 0xba, 0xc2, 0xca,
> + 0xd0, 0xd8, 0xe1, 0xe8, 0xf0, 0xf8, 0xff, 0xf7, 0xd8, 0xbe,
> + 0xa7, 0x39, 0x40, 0x85, 0x8c, 0xc0, 0x04, 0x07, 0x0c, 0x17,
> + 0x1c, 0x23, 0x2b, 0x34, 0x3b, 0x43, 0x4c, 0x54, 0x5b, 0x63,
> + 0x6a, 0x73, 0x7a, 0x82, 0x8a, 0x91, 0x98, 0xa1, 0xa8, 0xb0,
> + 0xb7, 0xc1, 0xc9, 0xcf, 0xd9, 0xe3, 0xea, 0xf4, 0xff, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_up_dn[] = {
> + 0x36, 0x10,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_sleep_in[] = {
> + 0x10,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_sleep_out[] = {
> + 0x11,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_display_on[] = {
> + 0x29,
> + ENDDEF
> +};
> +
> +static const unsigned short seq_display_off[] = {
> + 0x10,
> + ENDDEF
> +};
> +
> +static int lms501kf03_spi_write_byte(struct lms501kf03 *lcd, int addr, int data)
> +{
> + u16 buf[1];
> + struct spi_message msg;
> +
> + struct spi_transfer xfer = {
> + .len = 2,
> + .tx_buf = buf,
> + };
> +
> + buf[0] = (addr << 8) | data;
> +
> + spi_message_init(&msg);
> + spi_message_add_tail(&xfer, &msg);
> +
> + return spi_sync(lcd->spi, &msg);
> +}
> +
> +static int lms501kf03_spi_write(struct lms501kf03 *lcd, unsigned char address,
> + unsigned char command)
> +{
> + int ret;
> +
> + ret = lms501kf03_spi_write_byte(lcd, address, command);
> +
> + return ret;
> +}
> +
> +static int lms501kf03_panel_send_sequence(struct lms501kf03 *lcd,
> + const unsigned short *wbuf)
> +{
> + int ret = 0, i = 0;
> +
> + while (wbuf[i] != ENDDEF) {
> + if (i == 0)
> + ret = lms501kf03_spi_write(lcd, COMMAND_ONLY, wbuf[i]);
> + else
> + ret = lms501kf03_spi_write(lcd, DATA_ONLY, wbuf[i]);
> + if (ret)
> + break;
> + i += 1;
> + }
> +
> + return ret;
> +}
> +
> +static int lms501kf03_ldi_init(struct lms501kf03 *lcd)
> +{
> + int ret, i;
> + static const unsigned short *init_seq[] = {
> + seq_password,
> + seq_power,
> + seq_display,
> + seq_rgb_if,
> + seq_display_inv,
> + seq_vcom,
> + seq_gate,
> + seq_panel,
> + seq_col_mod,
> + seq_w_gamma,
> + seq_rgb_gamma,
> + seq_sleep_out,
> + };
> +
> + for (i = 0; i < ARRAY_SIZE(init_seq); i++) {
> + ret = lms501kf03_panel_send_sequence(lcd, init_seq[i]);
> + if (ret)
> + break;
> + }
> + /* according to the datasheet, 120ms delay time is required. */
> + msleep(120);
> +
> + return ret;
> +}
> +
> +static int lms501kf03_ldi_enable(struct lms501kf03 *lcd)
> +{
> + return lms501kf03_panel_send_sequence(lcd, seq_display_on);
> +}
> +
> +static int lms501kf03_ldi_disable(struct lms501kf03 *lcd)
> +{
> + return lms501kf03_panel_send_sequence(lcd, seq_display_off);
> +}
> +
> +static int lms501kf03_power_is_on(int power)
> +{
> + return (power) <= FB_BLANK_NORMAL;
> +}
> +
> +static int lms501kf03_power_on(struct lms501kf03 *lcd)
> +{
> + int ret = 0;
> + struct lcd_platform_data *pd;
> +
> + pd = lcd->lcd_pd;
> +
> + if (!pd->power_on) {
> + dev_err(lcd->dev, "power_on is NULL.\n");
> + return -EFAULT;
> + } else {
> + pd->power_on(lcd->ld, 1);
> + msleep(pd->power_on_delay);
> + }
> +
> + if (!pd->reset) {
> + dev_err(lcd->dev, "reset is NULL.\n");
> + return -EFAULT;
> + } else {
> + pd->reset(lcd->ld);
> + msleep(pd->reset_delay);
> + }
> +
> + ret = lms501kf03_ldi_init(lcd);
> + if (ret) {
> + dev_err(lcd->dev, "failed to initialize ldi.\n");
> + return ret;
> + }
> +
> + ret = lms501kf03_ldi_enable(lcd);
> + if (ret) {
> + dev_err(lcd->dev, "failed to enable ldi.\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int lms501kf03_power_off(struct lms501kf03 *lcd)
> +{
> + int ret = 0;
> + struct lcd_platform_data *pd;
> +
> + pd = lcd->lcd_pd;
> +
> + ret = lms501kf03_ldi_disable(lcd);
> + if (ret) {
> + dev_err(lcd->dev, "lcd setting failed.\n");
> + return -EIO;
> + }
> +
> + msleep(pd->power_off_delay);
> +
> + pd->power_on(lcd->ld, 0);
> +
> + return 0;
> +}
> +
> +static int lms501kf03_power(struct lms501kf03 *lcd, int power)
> +{
> + int ret = 0;
> +
> + if (lms501kf03_power_is_on(power) &&
> + !lms501kf03_power_is_on(lcd->power))
> + ret = lms501kf03_power_on(lcd);
> + else if (!lms501kf03_power_is_on(power) &&
> + lms501kf03_power_is_on(lcd->power))
> + ret = lms501kf03_power_off(lcd);
> +
> + if (!ret)
> + lcd->power = power;
> +
> + return ret;
> +}
> +
> +static int lms501kf03_get_power(struct lcd_device *ld)
> +{
> + struct lms501kf03 *lcd = lcd_get_data(ld);
> +
> + return lcd->power;
> +}
> +
> +static int lms501kf03_set_power(struct lcd_device *ld, int power)
> +{
> + struct lms501kf03 *lcd = lcd_get_data(ld);
> +
> + if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
> + power != FB_BLANK_NORMAL) {
> + dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
> + return -EINVAL;
> + }
> +
> + return lms501kf03_power(lcd, power);
> +}
> +
> +static struct lcd_ops lms501kf03_lcd_ops = {
> + .get_power = lms501kf03_get_power,
> + .set_power = lms501kf03_set_power,
> +};
> +
> +static int lms501kf03_probe(struct spi_device *spi)
> +{
> + struct lms501kf03 *lcd = NULL;
> + struct lcd_device *ld = NULL;
> + int ret = 0;
> +
> + lcd = devm_kzalloc(&spi->dev, sizeof(struct lms501kf03), GFP_KERNEL);
> + if (!lcd)
> + return -ENOMEM;
> +
> + /* lms501kf03 lcd panel uses 3-wire 9-bit SPI Mode. */
> + spi->bits_per_word = 9;
> +
> + ret = spi_setup(spi);
> + if (ret < 0) {
> + dev_err(&spi->dev, "spi setup failed.\n");
> + return ret;
> + }
> +
> + lcd->spi = spi;
> + lcd->dev = &spi->dev;
> +
> + lcd->lcd_pd = spi->dev.platform_data;
> + if (!lcd->lcd_pd) {
> + dev_err(&spi->dev, "platform data is NULL\n");
> + return -EFAULT;
> + }
> +
> + ld = lcd_device_register("lms501kf03", &spi->dev, lcd,
> + &lms501kf03_lcd_ops);
> + if (IS_ERR(ld))
> + return PTR_ERR(ld);
> +
> + lcd->ld = ld;
> +
> + if (!lcd->lcd_pd->lcd_enabled) {
> + /*
> + * if lcd panel was off from bootloader then
> + * current lcd status is powerdown and then
> + * it enables lcd panel.
> + */
> + lcd->power = FB_BLANK_POWERDOWN;
> +
> + lms501kf03_power(lcd, FB_BLANK_UNBLANK);
> + } else {
> + lcd->power = FB_BLANK_UNBLANK;
> + }
> +
> + dev_set_drvdata(&spi->dev, lcd);
> +
> + dev_info(&spi->dev, "lms501kf03 panel driver has been probed.\n");
> +
> + return 0;
> +}
> +
> +static int lms501kf03_remove(struct spi_device *spi)
> +{
> + struct lms501kf03 *lcd = dev_get_drvdata(&spi->dev);
> +
> + lms501kf03_power(lcd, FB_BLANK_POWERDOWN);
> + lcd_device_unregister(lcd->ld);
> +
> + return 0;
> +}
> +
> +#if defined(CONFIG_PM)
> +static unsigned int before_power;
> +
> +static int lms501kf03_suspend(struct spi_device *spi, pm_message_t mesg)
> +{
> + int ret = 0;
> + struct lms501kf03 *lcd = dev_get_drvdata(&spi->dev);
> +
> + dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power);
> +
> + before_power = lcd->power;
> +
> + /*
> + * when lcd panel is suspend, lcd panel becomes off
> + * regardless of status.
> + */
> + ret = lms501kf03_power(lcd, FB_BLANK_POWERDOWN);
> +
> + return ret;
> +}
> +
> +static int lms501kf03_resume(struct spi_device *spi)
> +{
> + int ret = 0;
> + struct lms501kf03 *lcd = dev_get_drvdata(&spi->dev);
> +
> + lcd->power = FB_BLANK_POWERDOWN;
> +
> + ret = lms501kf03_power(lcd, FB_BLANK_UNBLANK);
> +
> + return ret;
> +}
> +#else
> +#define lms501kf03_suspend NULL
> +#define lms501kf03_resume NULL
> +#endif
> +
> +void lms501kf03_shutdown(struct spi_device *spi)
> +{
> + struct lms501kf03 *lcd = dev_get_drvdata(&spi->dev);
> +
> + lms501kf03_power(lcd, FB_BLANK_POWERDOWN);
> +}
> +
> +static struct spi_driver lms501kf03_driver = {
> + .driver = {
> + .name = "lms501kf03",
> + .owner = THIS_MODULE,
> + },
> + .probe = lms501kf03_probe,
> + .remove = lms501kf03_remove,
> + .shutdown = lms501kf03_shutdown,
> + .suspend = lms501kf03_suspend,
> + .resume = lms501kf03_resume,
> +};
> +
> +module_spi_driver(lms501kf03_driver);
> +
> +MODULE_AUTHOR("Jingoo Han <jg1.han@...sung.com>");
> +MODULE_DESCRIPTION("lms501kf03 LCD Driver");
> +MODULE_LICENSE("GPL");
> --
> 1.7.2.5
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
With warm regards,
Sachin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists