lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Sat, 22 Dec 2012 02:11:27 +0900
From:	Dongjin Kim <tobetter@...il.com>
To:	unlisted-recipients:; (no To-header on input)
Cc:	Dongjin Kim <tobetter@...il.com>, Chris Ball <cjb@...top.org>,
	Arnd Bergmann <arnd@...db.de>,
	Thomas Abraham <thomas.abraham@...aro.org>,
	Will Newton <will.newton@...tec.com>,
	linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] mmc: host: dw_mmc-exynos: Add support for pinctrl

This patch adds support for pin configuration using pinctrl subsystem to
dw_mmc-exynos driver. The property 'wp-gpios' can be specified for write
protect but 'samsung,cd-pinmux-gpio' and gpios used for clock, command and
data lines will be ignored.

-. 'pinctrl-0' should specify pin control groups (clock, comand and data
    lines) used for this controller.
-. 'pinctrl-names' should contain only one value, 'default'.

Signed-off-by: Dongjin Kim <tobetter@...il.com>
---
 drivers/mmc/host/dw_mmc-exynos.c |   44 ++++++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 16 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index 4d50da6..d1c9963 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -16,6 +16,7 @@
 #include <linux/mmc/dw_mmc.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
 
 #include "dw_mmc.h"
 #include "dw_mmc-pltfm.h"
@@ -49,6 +50,7 @@ struct dw_mci_exynos_priv_data {
 	u8				ciu_div;
 	u32				sdr_timing;
 	u32				ddr_timing;
+	struct pinctrl			*pctrl;
 };
 
 static struct dw_mci_exynos_compatible {
@@ -84,6 +86,10 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
 			priv->ctrl_type = exynos_compat[idx].ctrl_type;
 	}
 
+	priv->pctrl = devm_pinctrl_get_select_default(host->dev);
+	if (IS_ERR(priv->pctrl))
+		dev_dbg(host->dev, "no pinctrl node\n");
+
 	host->priv = priv;
 	return 0;
 }
@@ -149,32 +155,19 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host)
 		return ret;
 
 	priv->ddr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
+
 	return 0;
 }
 
 static int dw_mci_exynos_setup_bus(struct dw_mci *host,
 				struct device_node *slot_np, u8 bus_width)
 {
+	struct dw_mci_exynos_priv_data *priv = host->priv;
 	int idx, gpio, ret;
 
 	if (!slot_np)
 		return -EINVAL;
 
-	/* cmd + clock + bus-width pins */
-	for (idx = 0; idx < NUM_PINS(bus_width); idx++) {
-		gpio = of_get_gpio(slot_np, idx);
-		if (!gpio_is_valid(gpio)) {
-			dev_err(host->dev, "invalid gpio: %d\n", gpio);
-			return -EINVAL;
-		}
-
-		ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus");
-		if (ret) {
-			dev_err(host->dev, "gpio [%d] request failed\n", gpio);
-			return -EBUSY;
-		}
-	}
-
 	gpio = of_get_named_gpio(slot_np, "wp-gpios", 0);
 	if (gpio_is_valid(gpio)) {
 		if (devm_gpio_request(host->dev, gpio, "dw-mci-wp"))
@@ -185,9 +178,12 @@ static int dw_mci_exynos_setup_bus(struct dw_mci *host,
 		host->pdata->quirks |= DW_MCI_QUIRK_NO_WRITE_PROTECT;
 	}
 
-	if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
+	if (!IS_ERR(priv->pctrl))
 		return 0;
 
+	if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
+		goto setup_bus;
+
 	gpio = of_get_named_gpio(slot_np, "samsung,cd-pinmux-gpio", 0);
 	if (gpio_is_valid(gpio)) {
 		if (devm_gpio_request(host->dev, gpio, "dw-mci-cd"))
@@ -196,6 +192,22 @@ static int dw_mci_exynos_setup_bus(struct dw_mci *host,
 		dev_info(host->dev, "cd gpio not available");
 	}
 
+ setup_bus:
+	/* cmd + clock + bus-width pins */
+	for (idx = 0; idx < NUM_PINS(bus_width); idx++) {
+		gpio = of_get_gpio(slot_np, idx);
+		if (!gpio_is_valid(gpio)) {
+			dev_err(host->dev, "invalid gpio: %d\n", gpio);
+			return -EINVAL;
+		}
+
+		ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus");
+		if (ret) {
+			dev_err(host->dev, "gpio [%d] request failed\n", gpio);
+			return -EBUSY;
+		}
+	}
+
 	return 0;
 }
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ