| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 18 Jan 2013 18:53:30 +0530
From: Abhilash Kesavan <a.kesavan@...sung.com>
To: myungjoo.ham@...sung.com, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, kgene.kim@...sung.com
Cc: kyungmin.park@...sung.com, rjw@...k.pl, jhbird.choi@...sung.com
Subject: [PATCH v4 2/4] ARM: EXYNOS5: Support Exynos5-bus devfreq driver
Setup the INT clock ops to control/vary INT frequency
Signed-off-by: Abhilash Kesavan <a.kesavan@...sung.com>
Acked-by: MyungJoo Ham <myungjoo.ham@...sung.com>
Cc: Jonghwan Choi <jhbird.choi@...sung.com>
Cc: Kukjin Kim <kgene.kim@...sung.com>
---
Changes since RFC v1:
* Fixed the unnecessary clock manipulations being done
* Moved the PPMU driver from drivers/devfreq to machine specific directory
Changes since v2:
* Moved the PPMU driver to drivers/devfreq/exynos directory
* Moved ppmu mach headers to include/linux
* Removed static mapping and switched to DT support for PPMU
Changes since v3:
* Updated clock divider values
arch/arm/mach-exynos/clock-exynos5.c | 143 ++++++++++++++++++++++++
arch/arm/mach-exynos/include/mach/regs-clock.h | 37 ++++++
2 files changed, 180 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index 0208c3a..050879c 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -108,6 +108,11 @@ static struct clk exynos5_clk_sclk_usbphy = {
.rate = 48000000,
};
+/* Virtual Bus INT clock */
+static struct clk exynos5_int_clk = {
+ .name = "int_clk",
+};
+
static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable);
@@ -1426,6 +1431,141 @@ static struct clk *exynos5_clks[] __initdata = {
&clk_fout_cpll,
&clk_fout_mpll_div2,
&exynos5_clk_armclk,
+ &exynos5_int_clk,
+};
+
+#define INT_FREQ(f, a0, a1, a2, a3, a4, a5, b0, b1, b2, b3, \
+ c0, c1, d0, e0) \
+ { \
+ .freq = (f) * 1000000, \
+ .clk_div_top0 = ((a0) << 0 | (a1) << 8 | (a2) << 12 | \
+ (a3) << 16 | (a4) << 20 | (a5) << 28), \
+ .clk_div_top1 = ((b0) << 12 | (b1) << 16 | (b2) << 20 | \
+ (b3) << 24), \
+ .clk_div_lex = ((c0) << 4 | (c1) << 8), \
+ .clk_div_r0x = ((d0) << 4), \
+ .clk_div_r1x = ((e0) << 4), \
+ }
+
+static struct {
+ unsigned long freq;
+ u32 clk_div_top0;
+ u32 clk_div_top1;
+ u32 clk_div_lex;
+ u32 clk_div_r0x;
+ u32 clk_div_r1x;
+} int_freq[] = {
+ /*
+ * values:
+ * freq
+ * clock divider for ACLK66, ACLK166, ACLK200, ACLK266,
+ ACLK333, ACLK300_DISP1
+ * clock divider for ACLK300_GSCL, ACLK400_IOP, ACLK400_ISP, ACLK66_PRE
+ * clock divider for PCLK_LEX, ATCLK_LEX
+ * clock divider for ACLK_PR0X
+ * clock divider for ACLK_PR1X
+ */
+ INT_FREQ(266, 5, 1, 3, 2, 0, 2, 2, 1, 1, 1, 1, 0, 1, 1),
+ INT_FREQ(200, 5, 2, 4, 3, 1, 2, 2, 3, 2, 1, 1, 0, 1, 1),
+ INT_FREQ(160, 5, 3, 4, 4, 2, 2, 2, 3, 3, 1, 1, 0, 1, 1),
+ INT_FREQ(133, 5, 3, 5, 5, 2, 2, 3, 4, 4, 1, 1, 0, 1, 1),
+ INT_FREQ(100, 5, 7, 7, 7, 7, 3, 7, 7, 7, 1, 1, 0, 1, 1),
+};
+
+static unsigned long exynos5_clk_int_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static void exynos5_int_set_clkdiv(unsigned int div_index)
+{
+ unsigned int tmp;
+
+ /* Change Divider - TOP0 */
+ tmp = __raw_readl(EXYNOS5_CLKDIV_TOP0);
+
+ tmp &= ~(EXYNOS5_CLKDIV_TOP0_ACLK266_MASK |
+ EXYNOS5_CLKDIV_TOP0_ACLK200_MASK |
+ EXYNOS5_CLKDIV_TOP0_ACLK66_MASK |
+ EXYNOS5_CLKDIV_TOP0_ACLK333_MASK |
+ EXYNOS5_CLKDIV_TOP0_ACLK166_MASK |
+ EXYNOS5_CLKDIV_TOP0_ACLK300_DISP1_MASK);
+
+ tmp |= int_freq[div_index].clk_div_top0;
+
+ __raw_writel(tmp, EXYNOS5_CLKDIV_TOP0);
+
+ /* Wait for TOP0 divider to stabilize */
+ while (__raw_readl(EXYNOS5_CLKDIV_STAT_TOP0) & 0x151101)
+ cpu_relax();
+
+ /* Change Divider - TOP1 */
+ tmp = __raw_readl(EXYNOS5_CLKDIV_TOP1);
+
+ tmp &= ~(EXYNOS5_CLKDIV_TOP1_ACLK400_ISP_MASK |
+ EXYNOS5_CLKDIV_TOP1_ACLK400_IOP_MASK |
+ EXYNOS5_CLKDIV_TOP1_ACLK66_PRE_MASK |
+ EXYNOS5_CLKDIV_TOP1_ACLK300_GSCL_MASK);
+
+ tmp |= int_freq[div_index].clk_div_top1;
+
+ __raw_writel(tmp, EXYNOS5_CLKDIV_TOP1);
+
+ /* Wait for TOP0 and TOP1 dividers to stabilize */
+ while ((__raw_readl(EXYNOS5_CLKDIV_STAT_TOP1) & 0x1110000) &&
+ (__raw_readl(EXYNOS5_CLKDIV_STAT_TOP0) & 0x80000))
+ cpu_relax();
+
+ /* Change Divider - LEX */
+ tmp = int_freq[div_index].clk_div_lex;
+
+ __raw_writel(tmp, EXYNOS5_CLKDIV_LEX);
+
+ /* Wait for LEX divider to stabilize */
+ while (__raw_readl(EXYNOS5_CLKDIV_STAT_LEX) & 0x110)
+ cpu_relax();
+
+ /* Change Divider - R0X */
+ tmp = int_freq[div_index].clk_div_r0x;
+
+ __raw_writel(tmp, EXYNOS5_CLKDIV_R0X);
+
+ /* Wait for R0X divider to stabilize */
+ while (__raw_readl(EXYNOS5_CLKDIV_STAT_R0X) & 0x10)
+ cpu_relax();
+
+ /* Change Divider - R1X */
+ tmp = int_freq[div_index].clk_div_r1x;
+
+ __raw_writel(tmp, EXYNOS5_CLKDIV_R1X);
+
+ /* Wait for R1X divider to stabilize */
+ while (__raw_readl(EXYNOS5_CLKDIV_STAT_R1X) & 0x10)
+ cpu_relax();
+}
+
+static int exynos5_clk_int_set_rate(struct clk *clk, unsigned long rate)
+{
+ int index;
+
+ for (index = 0; index < ARRAY_SIZE(int_freq); index++)
+ if (int_freq[index].freq == rate)
+ break;
+
+ if (index == ARRAY_SIZE(int_freq))
+ return -EINVAL;
+
+ /* Change the system clock divider values */
+ exynos5_int_set_clkdiv(index);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+static struct clk_ops exynos5_clk_int_ops = {
+ .get_rate = exynos5_clk_int_get_rate,
+ .set_rate = exynos5_clk_int_set_rate
};
static u32 epll_div[][6] = {
@@ -1620,6 +1760,9 @@ void __init_or_cpufreq exynos5_setup_clocks(void)
clk_fout_epll.ops = &exynos5_epll_ops;
+ exynos5_int_clk.ops = &exynos5_clk_int_ops;
+ exynos5_int_clk.rate = aclk_266;
+
if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll))
printk(KERN_ERR "Unable to set parent %s of clock %s.\n",
clk_fout_epll.name, exynos5_clk_mout_epll.clk.name);
diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
index d36ad76..3d3cbc8 100644
--- a/arch/arm/mach-exynos/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos/include/mach/regs-clock.h
@@ -323,6 +323,9 @@
#define EXYNOS5_CLKDIV_PERIC5 EXYNOS_CLKREG(0x1056C)
#define EXYNOS5_SCLK_DIV_ISP EXYNOS_CLKREG(0x10580)
+#define EXYNOS5_CLKDIV_STAT_TOP0 EXYNOS_CLKREG(0x10610)
+#define EXYNOS5_CLKDIV_STAT_TOP1 EXYNOS_CLKREG(0x10614)
+
#define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800)
#define EXYNOS5_CLKGATE_IP_ISP0 EXYNOS_CLKREG(0x0C800)
#define EXYNOS5_CLKGATE_IP_ISP1 EXYNOS_CLKREG(0x0C804)
@@ -337,6 +340,18 @@
#define EXYNOS5_CLKGATE_IP_PERIS EXYNOS_CLKREG(0x10960)
#define EXYNOS5_CLKGATE_BLOCK EXYNOS_CLKREG(0x10980)
+#define EXYNOS5_CLKGATE_BUS_SYSLFT EXYNOS_CLKREG(0x08920)
+
+#define EXYNOS5_CLKOUT_CMU_TOP EXYNOS_CLKREG(0x10A00)
+
+#define EXYNOS5_CLKDIV_LEX EXYNOS_CLKREG(0x14500)
+#define EXYNOS5_CLKDIV_STAT_LEX EXYNOS_CLKREG(0x14600)
+
+#define EXYNOS5_CLKDIV_R0X EXYNOS_CLKREG(0x18500)
+#define EXYNOS5_CLKDIV_STAT_R0X EXYNOS_CLKREG(0x18600)
+
+#define EXYNOS5_CLKDIV_R1X EXYNOS_CLKREG(0x1C500)
+#define EXYNOS5_CLKDIV_STAT_R1X EXYNOS_CLKREG(0x1C600)
#define EXYNOS5_BPLL_CON0 EXYNOS_CLKREG(0x20110)
#define EXYNOS5_CLKSRC_CDREX EXYNOS_CLKREG(0x20200)
#define EXYNOS5_CLKDIV_CDREX EXYNOS_CLKREG(0x20500)
@@ -347,6 +362,28 @@
#define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29)
+#define EXYNOS5_CLKDIV_TOP0_ACLK300_DISP1_SHIFT (28)
+#define EXYNOS5_CLKDIV_TOP0_ACLK300_DISP1_MASK (0x7 << EXYNOS5_CLKDIV_TOP0_ACLK300_DISP1_SHIFT)
+#define EXYNOS5_CLKDIV_TOP0_ACLK333_SHIFT (20)
+#define EXYNOS5_CLKDIV_TOP0_ACLK333_MASK (0x7 << EXYNOS5_CLKDIV_TOP0_ACLK333_SHIFT)
+#define EXYNOS5_CLKDIV_TOP0_ACLK266_SHIFT (16)
+#define EXYNOS5_CLKDIV_TOP0_ACLK266_MASK (0x7 << EXYNOS5_CLKDIV_TOP0_ACLK266_SHIFT)
+#define EXYNOS5_CLKDIV_TOP0_ACLK200_SHIFT (12)
+#define EXYNOS5_CLKDIV_TOP0_ACLK200_MASK (0x7 << EXYNOS5_CLKDIV_TOP0_ACLK200_SHIFT)
+#define EXYNOS5_CLKDIV_TOP0_ACLK166_SHIFT (8)
+#define EXYNOS5_CLKDIV_TOP0_ACLK166_MASK (0x7 << EXYNOS5_CLKDIV_TOP0_ACLK166_SHIFT)
+#define EXYNOS5_CLKDIV_TOP0_ACLK66_SHIFT (0)
+#define EXYNOS5_CLKDIV_TOP0_ACLK66_MASK (0x7 << EXYNOS5_CLKDIV_TOP0_ACLK66_SHIFT)
+
+#define EXYNOS5_CLKDIV_TOP1_ACLK66_PRE_SHIFT (24)
+#define EXYNOS5_CLKDIV_TOP1_ACLK66_PRE_MASK (0x7 << EXYNOS5_CLKDIV_TOP1_ACLK66_PRE_SHIFT)
+#define EXYNOS5_CLKDIV_TOP1_ACLK400_ISP_SHIFT (20)
+#define EXYNOS5_CLKDIV_TOP1_ACLK400_ISP_MASK (0x7 << EXYNOS5_CLKDIV_TOP1_ACLK400_ISP_SHIFT)
+#define EXYNOS5_CLKDIV_TOP1_ACLK400_IOP_SHIFT (16)
+#define EXYNOS5_CLKDIV_TOP1_ACLK400_IOP_MASK (0x7 << EXYNOS5_CLKDIV_TOP1_ACLK400_IOP_SHIFT)
+#define EXYNOS5_CLKDIV_TOP1_ACLK300_GSCL_SHIFT (12)
+#define EXYNOS5_CLKDIV_TOP1_ACLK300_GSCL_MASK (0x7 << EXYNOS5_CLKDIV_TOP1_ACLK300_GSCL_SHIFT)
+
#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28)
#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16)
#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9)
--
1.7.8.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists