linux-kernel - [PATCH 0/2] DaVinci: da850: Add NOR flash DT node support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 29 Jan 2013 10:49:54 +0530
From:	"Kumar, Anil" <anilkumar.v@...com>
To:	<devicetree-discuss@...ts.ozlabs.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>,
	<davinci-linux-open-source@...ux.davincidsp.com>
CC:	<b-cousson@...com>, <tony@...mide.com>,
	<grant.likely@...retlab.ca>, <rob.herring@...xeda.com>,
	<linux@....linux.org.uk>, <nsekhar@...com>,
	<khilman@...prootsystems.com>, <hs@...x.de>, <anilkumar.v@...com>
Subject: [PATCH 0/2] DaVinci: da850: Add NOR flash DT node support

Add NOR flash DT node support for DA850 EVM and related pin mux.
Configure 16 bit data bus width for CS2(aemif) to use the norflash on
DA850.

This series is based on top of 3.8-rc4 and the following patches.

 -drivers/pinctrl: grab default handles from device core
  https://patchwork.kernel.org/patch/1862231/
 -ARM: davinci: da850: add pinctrl driver DT entries

Tested on DA850 EVM.

Kumar, Anil (2):
  ARM: davinci: da850 evm: add norflash DT node
  ARM: davinci: da850: configure CS2(aemif) for norflash

 arch/arm/boot/dts/da850-evm.dts  |   25 +++++++++++++++++++++++
 arch/arm/boot/dts/da850.dtsi     |   41 ++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/da8xx-dt.c |   17 +++++++++++++++
 3 files changed, 83 insertions(+), 0 deletions(-)

-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/