| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 15 Feb 2013 10:44:48 -0200 From: Mauro Carvalho Chehab <mchehab@...hat.com> To: unlisted-recipients:; (no To-header on input) Cc: linux-acpi@...r.kernel.org, Huang Ying <ying.huang@...el.com>, Tony Luck <tony.luck@...el.com>, Mauro Carvalho Chehab <mchehab@...hat.com>, Linux Edac Mailing List <linux-edac@...r.kernel.org>, Linux Kernel Mailing List <linux-kernel@...r.kernel.org> Subject: [PATCH EDAC 00/13] Add a driver to report Firmware first errors (via GHES) There are currently 3 error mechanisms inside the Linux Kernel: edac, mcelog and ghes. Unfortunately, not all those error mechanisms will work at the same time, as accessing the error registers by the BIOS may interfere on reading them from OS. So, all those 3 mechanisms need to be integrated, in order to avoid such problems. This patch series adds a new EDAC driver that uses "Firmware first" APEI/GHES as an error report mechanism. It automatically disables the hardware-driven EDAC drivers when GHES is enabled, preventing to have both OS and BIOS to read at the very same error mechanisms. It was tested on a "Lizard Head Pass" Intel machine, equipped with BIOS SE5C600.86B.99.99.x059.091020121352 (09/10/2012). Test results: The driver is properly binding into the EDAC core. This BIOS announces and sets "Firmware first" mode: [ 4.537704] ghes_edac: This EDAC driver relies on BIOS to enumerate memory and get error reports. [ 4.547644] ghes_edac: Unfortunately, not all BIOSes reflect the memory layout correctly. [ 4.556807] ghes_edac: So, the end result of using this driver varies from vendor to vendor. [ 4.566260] ghes_edac: If you find incorrect reports, please ask your vendor to fix its BIOS. [ 4.575811] ghes_edac: This system has 48 DIMM sockets. [ 4.581687] EDAC DEBUG: ghes_edac_dmidecode: DIMM0: DDR3 size = 8192 MB(ECC) [ 4.581691] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581695] EDAC DEBUG: ghes_edac_dmidecode: DIMM3: DDR3 size = 8192 MB(ECC) [ 4.581698] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581702] EDAC DEBUG: ghes_edac_dmidecode: DIMM6: DDR3 size = 8192 MB(ECC) [ 4.581705] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581708] EDAC DEBUG: ghes_edac_dmidecode: DIMM9: DDR3 size = 8192 MB(ECC) [ 4.581711] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581715] EDAC DEBUG: ghes_edac_dmidecode: DIMM12: DDR3 size = 8192 MB(ECC) [ 4.581718] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581722] EDAC DEBUG: ghes_edac_dmidecode: DIMM15: DDR3 size = 8192 MB(ECC) [ 4.581724] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581728] EDAC DEBUG: ghes_edac_dmidecode: DIMM18: DDR3 size = 8192 MB(ECC) [ 4.581730] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581734] EDAC DEBUG: ghes_edac_dmidecode: DIMM21: DDR3 size = 8192 MB(ECC) [ 4.581737] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581741] EDAC DEBUG: ghes_edac_dmidecode: DIMM24: DDR3 size = 8192 MB(ECC) [ 4.581752] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581756] EDAC DEBUG: ghes_edac_dmidecode: DIMM27: DDR3 size = 8192 MB(ECC) [ 4.581759] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581763] EDAC DEBUG: ghes_edac_dmidecode: DIMM30: DDR3 size = 8192 MB(ECC) [ 4.581766] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581769] EDAC DEBUG: ghes_edac_dmidecode: DIMM33: DDR3 size = 8192 MB(ECC) [ 4.581772] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581776] EDAC DEBUG: ghes_edac_dmidecode: DIMM36: DDR3 size = 8192 MB(ECC) [ 4.581778] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581782] EDAC DEBUG: ghes_edac_dmidecode: DIMM39: DDR3 size = 8192 MB(ECC) [ 4.581784] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581788] EDAC DEBUG: ghes_edac_dmidecode: DIMM42: DDR3 size = 8192 MB(ECC) [ 4.581791] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.581795] EDAC DEBUG: ghes_edac_dmidecode: DIMM45: DDR3 size = 8192 MB(ECC) [ 4.581797] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64) [ 4.582724] EDAC MC0: Giving out device to 'ghes_edac.c' 'ghes_edac': DEV ghes [ 4.591145] EDAC MC1: Giving out device to 'ghes_edac.c' 'ghes_edac': DEV ghes [ 4.599524] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. However, with this BIOS, the "Firmware first" is not working. The errors are only seen via MCELOG error mechanism: # mcelog Hardware event. This is not a software error. MCE 0 CPU 0 BANK 5 MISC 20404c4c86 ADDR 320000 TIME 1360931174 Fri Feb 15 07:26:14 2013 MCG status: MCi status: Corrected error MCi_MISC register valid MCi_ADDR register valid MCA: MEMORY CONTROLLER RD_CHANNEL0_ERR Transaction: Memory read error STATUS 8c00004000010090 MCGSTATUS 0 MCGCAP 1000c14 APICID 0 SOCKETID 0 CPUID Vendor Intel Family 6 Model 45 Hardware event. This is not a software error. So, I was unable to test the GHES->EDAC error report method. Mauro Carvalho Chehab (13): edac: lock module owner to avoid error report conflicts ghes: move structures/enum to a header file ghes: add the needed hooks for EDAC error report edac: add a new memory layer type ghes_edac: Register at EDAC core the BIOS report ghes_edac: Allow registering more than once edac: add support for raw error reports ghes_edac: add support for reporting errors via EDAC ghes_edac: do a better job of filling EDAC DIMM info edac: better report error conditions in debug mode edac: initialize the core earlier ghes_edac.c: Don't credit the same memory dimm twice ghes_edac: Improve driver's printk messages drivers/acpi/apei/ghes.c | 64 +++------ drivers/edac/Kconfig | 23 ++++ drivers/edac/Makefile | 1 + drivers/edac/edac_core.h | 17 +++ drivers/edac/edac_mc.c | 136 ++++++++++++++----- drivers/edac/edac_mc_sysfs.c | 7 +- drivers/edac/edac_module.c | 2 +- drivers/edac/ghes_edac.c | 313 +++++++++++++++++++++++++++++++++++++++++++ include/acpi/ghes.h | 72 ++++++++++ include/linux/edac.h | 5 + 10 files changed, 560 insertions(+), 80 deletions(-) create mode 100644 drivers/edac/ghes_edac.c create mode 100644 include/acpi/ghes.h -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists