| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 19 Feb 2013 19:11:57 +0100
From: Vasilis Liaskovitis <vasilis.liaskovitis@...fitbricks.com>
To: "Rafael J. Wysocki" <rjw@...k.pl>
Cc: ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
LKML <linux-kernel@...r.kernel.org>,
Yinghai Lu <yinghai@...nel.org>,
Toshi Kani <toshi.kani@...com>,
Yasuaki Ishimatsu <isimatu.yasuaki@...fujitsu.com>,
Jiang Liu <liuj97@...il.com>
Subject: Re: [PATCH 7/7] ACPI / scan: Make memory hotplug driver use struct
acpi_scan_handler
Hi,
On Sun, Feb 17, 2013 at 04:27:18PM +0100, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
>
> Make the ACPI memory hotplug driver use struct acpi_scan_handler
> for representing the object used to set up ACPI memory hotplug
> functionality and to remove hotplug memory ranges and data
> structures used by the driver before unregistering ACPI device
> nodes representing memory. Register the new struct acpi_scan_handler
> object with the help of acpi_scan_add_handler_with_hotplug() to allow
> user space to manipulate the attributes of the memory hotplug
> profile.
Let's consider an example where we want acpi memory device ejection to be safely
handled by userspace. We do the following:
echo 0 > /sys/firmware/acpi/hotplug/memory/autoeject
echo 1 > /sys/firmware/acpi/hotplug/memory/uevents
We succesfully hotplug acpi device:
/sys/devices/LNXSYSTM:00/LNXSYSBUS:00/PNP0C80:00
and its corresponding memblocks /sys/devices/system/memory/memoryXX are
also successfully onlined.
On an eject request, since uevents == 1, the kernel will emit KOBJ_OFFLINE for:
/sys/devices/LNXSYSTM:00/LNXSYSBUS:00/PNP0C80:00
Can userspace know which memblocks in /sys/devices/system/memory/memoryXX/
correspond to the acpi device /sys/devices/LNXSYSTM:00/LNXSYSBUS:00/PNP0C80:00 ?
This will be needed so that userspace tries to offline the memblocks (and only
if successful, issue the eject operation on the acpi device). As far as I see,
we don't create any sysfs links or files for this scenario - can userspace get
this info somehow?
/sys/devices/system/memory/memoryXX/phys_device needs to be properly implemented
for this to work I think, see Documentation/ABI/testing/sysfs-memory
The following test patch works toward that direction. Let me know if it's of
interest or if there are better ideas /comments.
From: Vasilis Liaskovitis <vasilis.liaskovitis@...fitbricks.com>
Date: Tue, 19 Feb 2013 18:36:25 +0100
Subject: [RFC PATCH] acpi / memory-hotplug: implement phys_device
In order for userspace to know which memblocks in:
/sys/devices/system/memory/memoryXX correspond to which acpi memory devices in:
/sys/devices/LNXSYSTM:00/LNXSYSBUS:00/PNP0C80:YY,
/sys/devices/system/memory/memoryXX/phys_device should return a name (or index
YY) of the memory device each memblock XX belongs to.
WIth this patch, the acpi mem_hotplug driver keeps a global list of acpi memory
devices (inserted in hotplug_order). The base memory driver checks against this
list in arch_get_memory_phys_device to determine the zero-based index of the
physical memory device each new memblock belongs to.
For initial memory or for non-acpi/hotplug enabled systems, phys_device is
always -1.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@...fitbricks.com>
---
Documentation/ABI/testing/sysfs-devices-memory | 8 ++++++-
drivers/acpi/acpi_memhotplug.c | 27 ++++++++++++++++++++++++
drivers/base/memory.c | 7 +++++-
include/linux/acpi.h | 2 +
4 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 7405de2..290c62a 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -27,7 +27,13 @@ Contact: Badari Pulavarty <pbadari@...ibm.com>
Description:
The file /sys/devices/system/memory/memoryX/phys_device
is read-only and is designed to show the name of physical
- memory device. Implementation is currently incomplete.
+ memory device. Implementation is currently incomplete. In a
+ system with CONFIG_ACPI_HOTPLUG_MEMORY=n, phys_device is always
+ -1. In a system with CONFIG_ACPI_HOTPLUG_MEMORY=y, phys_device
+ is -1 for all initial / non-hot-removable memory. For
+ memory that has been hot-plugged, phys_device will return the
+ zero-based index of the physical device that this memory block
+ belongs to. Indices are determined by hotplug order.
What: /sys/devices/system/memory/memoryX/phys_index
Date: September 2008
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 3be9501..4154dc5 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -48,6 +48,7 @@ ACPI_MODULE_NAME("acpi_memhotplug");
#define MEMORY_POWER_ON_STATE 1
#define MEMORY_POWER_OFF_STATE 2
+static LIST_HEAD(acpi_mem_device_list);
static int acpi_memory_device_add(struct acpi_device *device,
const struct acpi_device_id *not_used);
static void acpi_memory_device_remove(struct acpi_device *device);
@@ -81,6 +82,7 @@ struct acpi_memory_device {
struct acpi_device * device;
unsigned int state; /* State of the memory device */
struct list_head res_list;
+ struct list_head mem_device_list;
};
static acpi_status
@@ -287,6 +289,7 @@ static int acpi_memory_device_add(struct acpi_device *device,
return -ENOMEM;
INIT_LIST_HEAD(&mem_device->res_list);
+ INIT_LIST_HEAD(&mem_device->mem_device_list);
mem_device->device = device;
sprintf(acpi_device_name(device), "%s", ACPI_MEMORY_DEVICE_NAME);
sprintf(acpi_device_class(device), "%s", ACPI_MEMORY_DEVICE_CLASS);
@@ -308,9 +311,11 @@ static int acpi_memory_device_add(struct acpi_device *device,
return 0;
}
+ list_add_tail(&mem_device->mem_device_list, &acpi_mem_device_list);
result = acpi_memory_enable_device(mem_device);
if (result) {
dev_err(&device->dev, "acpi_memory_enable_device() error\n");
+ list_del(&mem_device->mem_device_list);
acpi_memory_device_free(mem_device);
return -ENODEV;
}
@@ -328,9 +333,31 @@ static void acpi_memory_device_remove(struct acpi_device *device)
mem_device = acpi_driver_data(device);
acpi_memory_remove_memory(mem_device);
+ list_del(&mem_device->mem_device_list);
acpi_memory_device_free(mem_device);
}
+int acpi_memory_phys_device(unsigned long start_pfn)
+{
+ struct acpi_memory_device *mem_dev;
+ struct acpi_memory_info *info;
+ unsigned long start_addr = start_pfn << PAGE_SHIFT;
+ int id = 0;
+
+ list_for_each_entry(mem_dev, &acpi_mem_device_list, mem_device_list) {
+ list_for_each_entry(info, &mem_dev->res_list, list) {
+ if ((info->start_addr <= start_addr) &&
+ (info->start_addr + info->length > start_addr))
+ return id;
+ }
+ id++;
+ }
+
+ /* Memory not associated with a hot-pluggable device gets -1. For
+ * example, initial memory. */
+ return -1;
+}
+
void __init acpi_memory_hotplug_init(void)
{
acpi_scan_add_handler_with_hotplug(&memory_device_handler, "memory");
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 8300a18..2cc98df 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -22,6 +22,7 @@
#include <linux/mutex.h>
#include <linux/stat.h>
#include <linux/slab.h>
+#include <linux/acpi.h>
#include <linux/atomic.h>
#include <asm/uaccess.h>
@@ -522,7 +523,11 @@ static inline int memory_fail_init(void)
*/
int __weak arch_get_memory_phys_device(unsigned long start_pfn)
{
- return 0;
+#ifdef CONFIG_ACPI_HOTPLUG_MEMORY
+ return acpi_memory_phys_device(start_pfn);
+#else
+ return -1;
+#endif
}
/*
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index f46cfd7..00302fc 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -562,6 +562,8 @@ static inline __printf(3, 4) void
acpi_handle_printk(const char *level, void *handle, const char *fmt, ...) {}
#endif /* !CONFIG_ACPI */
+int acpi_memory_phys_device(unsigned long start_pfn);
+
/*
* acpi_handle_<level>: Print message with ACPI prefix and object path
*
--
1.7.9
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists