| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 16 Mar 2013 18:35:37 +0800
From: Tang Chen <tangchen@...fujitsu.com>
To: rob@...dley.net, tglx@...utronix.de, mingo@...hat.com,
hpa@...or.com, yinghai@...nel.org, akpm@...ux-foundation.org,
wency@...fujitsu.com, trenn@...e.de, liwanp@...ux.vnet.ibm.com,
mgorman@...e.de, walken@...gle.com, riel@...hat.com,
khlebnikov@...nvz.org, tj@...nel.org, minchan@...nel.org,
m.szyprowski@...sung.com, mina86@...a86.com, laijs@...fujitsu.com,
isimatu.yasuaki@...fujitsu.com, linfeng@...fujitsu.com,
jiang.liu@...wei.com, kosaki.motohiro@...fujitsu.com,
guz.fnst@...fujitsu.com
Cc: x86@...nel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-mm@...ck.org
Subject: [PATCH v1 4/9] x86, mm, numa, acpi: Introduce zone_movable_limit[] to store start pfn of ZONE_MOVABLE.
Since node info in SRAT may not be in increasing order, we may meet
a lower range after we handled a higher range. So we need to keep
the lowest movable pfn each time we parse a SRAT memory entry, and
update it when we get a lower one.
This patch introduces a new array zone_movable_limit[], which is used
to store the start pfn of each node's ZONE_MOVABLE.
We update it each time we parsed a SRAT memory entry if necessary.
Signed-off-by: Tang Chen <tangchen@...fujitsu.com>
---
arch/x86/mm/srat.c | 29 +++++++++++++++++++++++++++++
include/linux/mm.h | 9 +++++++++
mm/page_alloc.c | 35 +++++++++++++++++++++++++++++++++--
3 files changed, 71 insertions(+), 2 deletions(-)
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index 5055fa7..6cd4d33 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -141,6 +141,33 @@ static inline int save_add_info(void) {return 1;}
static inline int save_add_info(void) {return 0;}
#endif
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+static void __init sanitize_movablemem_map(int nid, u64 start, u64 end)
+{
+ int overlap;
+ unsigned long start_pfn, end_pfn;
+
+ start_pfn = PFN_DOWN(start);
+ end_pfn = PFN_UP(end);
+
+ overlap = movablemem_map_overlap(start_pfn, end_pfn);
+ if (overlap >= 0) {
+ start_pfn = max(start_pfn,
+ movablemem_map.map[overlap].start_pfn);
+
+ if (zone_movable_limit[nid])
+ zone_movable_limit[nid] = min(zone_movable_limit[nid],
+ start_pfn);
+ else
+ zone_movable_limit[nid] = start_pfn;
+ }
+}
+#else /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+static inline void sanitize_movablemem_map(int nid, u64 start, u64 end)
+{
+}
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
int __init
acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
@@ -181,6 +208,8 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
(unsigned long long) start, (unsigned long long) end - 1,
hotpluggable ? "Hot Pluggable" : "");
+ sanitize_movablemem_map(node, start, end);
+
return 0;
out_err_bad_srat:
bad_srat();
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 9c068d5..d2c5fec 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1343,6 +1343,15 @@ struct movablemem_map {
struct movablemem_entry map[MOVABLEMEM_MAP_MAX];
};
+extern struct movablemem_map movablemem_map;
+
+extern void __init insert_movablemem_map(unsigned long start_pfn,
+ unsigned long end_pfn);
+extern int __init movablemem_map_overlap(unsigned long start_pfn,
+ unsigned long end_pfn);
+
+extern unsigned long __meminitdata zone_movable_limit[MAX_NUMNODES];
+
#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
#if !defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) && \
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 27fcd29..f451ded 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -210,6 +210,7 @@ static unsigned long __meminitdata arch_zone_highest_possible_pfn[MAX_NR_ZONES];
static unsigned long __initdata required_kernelcore;
static unsigned long __initdata required_movablecore;
static unsigned long __meminitdata zone_movable_pfn[MAX_NUMNODES];
+unsigned long __meminitdata zone_movable_limit[MAX_NUMNODES];
/* movable_zone is the "real" zone pages in ZONE_MOVABLE are taken from */
int movable_zone;
@@ -5065,6 +5066,36 @@ early_param("kernelcore", cmdline_parse_kernelcore);
early_param("movablecore", cmdline_parse_movablecore);
/**
+ * movablemem_map_overlap() - Check if a range overlaps movablemem_map.map[].
+ * @start_pfn: start pfn of the range to be checked
+ * @end_pfn: end pfn of the range to be checked (exclusive)
+ *
+ * This function checks if a given memory range [start_pfn, end_pfn) overlaps
+ * the movablemem_map.map[] array.
+ *
+ * Return: index of the first overlapped element in movablemem_map.map[]
+ * or -1 if they don't overlap each other.
+ */
+int __init movablemem_map_overlap(unsigned long start_pfn,
+ unsigned long end_pfn)
+{
+ int overlap;
+
+ if (!movablemem_map.nr_map)
+ return -1;
+
+ for (overlap = 0; overlap < movablemem_map.nr_map; overlap++)
+ if (start_pfn < movablemem_map.map[overlap].end_pfn)
+ break;
+
+ if (overlap == movablemem_map.nr_map ||
+ end_pfn <= movablemem_map.map[overlap].start_pfn)
+ return -1;
+
+ return overlap;
+}
+
+/**
* insert_movablemem_map - Insert a memory range in to movablemem_map.map.
* @start_pfn: start pfn of the range
* @end_pfn: end pfn of the range
@@ -5072,8 +5103,8 @@ early_param("movablecore", cmdline_parse_movablecore);
* This function will also merge the overlapped ranges, and sort the array
* by start_pfn in monotonic increasing order.
*/
-static void __init insert_movablemem_map(unsigned long start_pfn,
- unsigned long end_pfn)
+void __init insert_movablemem_map(unsigned long start_pfn,
+ unsigned long end_pfn)
{
int pos, overlap;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists