| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 29 Apr 2013 09:23:28 -0700
From: Greg KH <gregkh@...uxfoundation.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>,
Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org
Subject: [GIT PATCH] USB patches for 3.10-rc1
The following changes since commit 31880c37c11e28cb81c70757e38392b42e695dc6:
Linux 3.9-rc6 (2013-04-07 20:49:54 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-3.10-rc1
for you to fetch changes up to 4626b8daf9bb00ce6b4d533c1a155211ad880f32:
USB: ehci-msm: USB_MSM_OTG needs USB_PHY (2013-04-25 11:00:25 -0700)
----------------------------------------------------------------
USB patches for 3.10-rc1
Here's the big USB pull request for 3.10-rc1.
Lots of USB patches here, the majority being USB gadget changes and
USB-serial driver cleanups, the rest being ARM build fixes / cleanups,
and individual driver updates. We also finally got some chipidea fixes,
which have been delayed for a number of kernel releases, as the
maintainer has now reappeared.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
----------------------------------------------------------------
Adrian Thomasset (2):
USB: ftdi_sio: correct ST Micro Connect Lite PIDs
USB: ftdi_sio: enable two UART ports on ST Microconnect Lite
Alan Stern (18):
USB: EHCI: split ehci-omap out to a separate driver
USB: EHCI: decrease schedule-status poll timeout
USB: EHCI: improve use of per-port status-change bits
USB: EHCI: reorganize ehci_iaa_watchdog()
USB: EHCI: don't turn on PORT_SUSPEND during port resume
USB: EHCI: fix up incorrect merge resolution
USB: EHCI: changes related to qh_refresh()
USB: EHCI: change return value of qh_completions()
USB: EHCI: split needs_rescan into two flags
USB: EHCI: consolidate code in ehci_urb_dequeue()
USB: EHCI: convert singly-linked lists to list_heads
USB: EHCI: improve end_unlink_async()
USB: EHCI: remove unused variable in unlink_empty_async()
USB: avoid error messages when a device is disconnected
USB: use "global suspend" for system sleep on USB-2 buses
USB: remove CONFIG_USB_SUSPEND option
USB: remove CONFIG_USB_SUSPEND from Documentation
USB: improve port transitions when EHCI starts up
Alexander Shishkin (8):
usb: chipidea: drop redundant includes
usb: chipidea: trim include list in udc code
usb: chipidea: trim include list in the core
usb: chipidea: remove home-grown tracing facility
usb: chipidea: convert debug entries in sysfs to debugfs
usb: chipidea: move role to debugfs
usb: chipidea: move debug files creation/removal to the core
usb: chipidea: make pci platform datas static
Andi Kleen (1):
USB: Fix initconst in ehci driver
Andrzej Pietrasiewicz (11):
usb: gadget: use consistent naming scheme for usb function modules
usb: gadget: nokia: remove unused include
usb: gadget: f_serial: convert to new function interface with backward compatibility
usb: gadget: serial: convert to new interface of f_serial
usb: gadget: f_serial: remove compatibility layer
usb: gadget: f_serial: add configfs support
usb: gadget: f_obex: convert to new function interface with backward compatibility
usb: gadget: serial: convert to new interface of f_obex
usb: gadget: f_obex: add configfs support
usb: gadget: f_sourcesink.c: correct a copy-paste misnomer
usb: gadget: zero: put function instances on unbind
Arnd Bergmann (9):
USB: EHCI: DT support for generic bus glue
usb: ehci: mark unlink_empty_async_suspended() as __maybe_unused
usb: exynos: do not include plat/usb-phy.h
usb: phy: phy core cannot yet be a module
usb: phy: tegra: don't call into tegra-ehci directly
USB: lpc32xx: ISP1301 needs USB_PHY
USB: OMAP: ISP1301 needs USB_PHY
USB: OHCI: avoid conflicting platform drivers
USB: ehci-msm: USB_MSM_OTG needs USB_PHY
Ben Jencks (1):
usb/misc/appledisplay: Add 24" LED Cinema display
Bhupesh Sharma (6):
usb: gadget: uvc: Add fix for UVC compliance test suite assertion 6.3.90 failure
usb: gadget: uvc: Add fix for UVC compliance test suite's assertion 6.1.25 failure
usb: gadget: uvc: Delay the status stage when setting alternate setting 1
usb: gadget: uvc: Make video streaming buffer size comply with USB3.0 SS
usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
usb: gadget/uvc: Add support for 'get_unmapped_area' for MMUless architectures
Bill Pemberton (1):
Revert "USB: quatech2: only write to the tty if the port is open."
Bjørn Mork (2):
USB: cdc-wdm: implement IOCTL_WDM_MAX_COMMAND
USB: option: add a D-Link DWM-156 variant
Chao Xie (6):
usb: gadget: mv_udc_core: remove unused clock
usb: otg: mv_otg: remove unused clock
usb: ehci: mv_ehci: remove unused clock
arm: mmp: remove clock from usb pdata for aspenite
arm: mmp: remove clock name from usb pdata for ttc
usb: mv_usb: remove clock name from pdata
Chen Gang (3):
usb: gadget: s3c-hsudc: delete outdated comment
usb: gadget: uvc: Use strlcpy instead of strncpy
USB: driver.c: processing failure, maching resume condition with suspend condition
Christian Engelmayer (1):
EHCI: Quirk flag for port power handling on overcurrent.
Colin Ian King (1):
usb: misc: sisusbvga: Avoid NULL pointer dereference from sisusb
Cyril Roelandt (1):
usb: gadget: uvc: Use GFP_ATOMIC under spin lock
Dan Carpenter (5):
usb: storage: onetouch: tighten a range check
usb: gadget: uvc: use capped length value
usb: chipidea: fix precedence bug in ci_requests_show()
USB: keyspan: pull in one indent level
USB: keyspan: add a sanity test on "len"
David Howells (2):
xhci: Use ilog2() rather than __ffs() for calculating SEGMENT_SHIFT
xhci: Rename SEGMENT_SIZE and SEGMENT_SHIFT as the former is used in a.out.h
David Linares (1):
USB: hub: Avoid NULL pointer dereference when hub doesn't have any ports
David Rientjes (1):
usb, gadget: use appropriate warning accessors
Denis Efremov (1):
usb: phy: remove exported function from __init section
Dmitry Torokhov (1):
USB: remove incorrect __exit markups
Doug Anderson (1):
usb: ehci-s5p: Use devm for requesting ehci_vbus_gpio
Du Xing (1):
USB: usb-skeleton.c: fix blocked forever in skel_read
Fabio Baltieri (14):
usb: musb: drop dangling CONFIG_USB_MUSB_DEBUG
usb: musb: ux500: implement musb_set_vbus
usb: musb: ux500: add otg notifier support
usb: otg: ab8500-usb: drop support for ab8500 pre v2.0
usb: phy: ab8500-usb: update irq handling code
usb: musb: ux500_dma: drop references to U5500
usb: phy: ab8500-usb: convert to devm_kzalloc
usb: phy: ab8500-usb: add regulator support
usb: phy: ab8500-usb: split ab8500_usb_phy_ctrl
usb: phy: ab8500-usb: enable/disable regulator on phy events
usb: phy: ab8500-usb: fix last notifier arguments
usb: phy: ab8500-usb: check regulator_enable return value
usb: phy: twl4030-usb: check regulator_enable return value
usb: phy: twl6030-usb: check regulator_enable return value
Fabio Estevam (3):
usb: chipidea: usbmisc_imx6q: Staticize usbmisc_imx6q_drv_init/exit()
usb: host: ehci-mxc: Remove unneeded header file
usb: host: ehci-mxc: Remove dev_info on probe
Felipe Balbi (200):
usb: gadget: udc-core: allow udc class register gadget device
usb: dwc3: gadget: let udc-core manage gadget->dev
usb: musb: gadget: let udc-core manage gadget-dev
usb: gadget: omap_udc: let udc-core manage gadget->dev
usb: gadget: amd5536udc: let udc-core manage gadget->dev
usb: gadget: at91_udc: let udc-core manage gadget->dev
usb: gadget: atmel_usba_udc: let udc-core manage gadget->dev
usb: gadget: bcm63xx_udc: let udc-core manage gadget->dev
usb: gadget: dummy_hcd: let udc-core manage gadget->dev
usb: gadget: fsl_qe_udc: let udc-core manage gadget->dev
usb: gadget: fsl_udc_core: let udc-core manage gadget->dev
usb: gadget: fusb300_udc: let udc-core manage gadget->dev
usb: gadget: goku_udc: let udc-core manage gadget->dev
usb: gadget: imx_udc: let udc-core manage gadget->dev
usb: gadget: lpc32xx_udc: let udc-core manage gadget->dev
usb: gadget: m66592-udc: let udc-core manage gadget->dev
usb: gadget: mv_u3d_core: let udc-core manage gadget->dev
usb: gadget: mv_u3d_core: fix a compile warning
usb: gadget: mv_udc_core: let udc-core manage gadget->dev
usb: gadget: net2272: let udc-core manage gadget->dev
usb: gadget: net2280: let udc-core manage gadget->dev
usb: gadget: pch_udc: let udc-core manage gadget->dev
usb: gadget: r8a66597-udc: let udc-core manage gadget->dev
usb: gadget: s3c-hsotg: let udc-core manage gadget->dev
usb: gadget: s3c-hsudc: let udc-core manage gadget->dev
usb: gadget: s3c2410_udc: let udc-core manage gadget->dev
usb: renesas_usbhs: gadget: let udc-core manage gadget->dev
usb: gadget: pxa25x_udc: let udc-core manage gadget->dev
usb: gadget: pxa27x_udc: let udc-core manage gadget->dev
usb: chipidea: let udc-core manage gadget->dev
usb: gadget: drop now unnecessary flag
usb: gadget: s3c-hsotg: switch over to usb_gadget_map/unmap_request()
usb: gadget: amd5536udc: remove unused structure member
usb: gadget: atmel_usba_udc: switch over to usb_gadget_map/unmap_request()
usb: gadget: fsl_udc_core: switch over to usb_gadget_map/unmap_request()
usb: gadget: fusb300: switch over to usb_gadget_map/unmap_request()
usb: gadget: lpc32xx_udc: switch over to usb_gadget_map/unmap_request()
usb: gadget: mv_udc_core: switch over to usb_gadget_map/unmap_request()
usb: dwc3: core: explicitly setup and cleanup event buffers
usb: dwc3: gadget: introduce and use enable/disable irq methods
usb: dwc3: gadget: save state of pullups
usb: dwc3: core: add power management support
usb: dwc3: omap: introduce enable/disable IRQ methods
usb: dwc3: omap: remove unused fields from private structure
usb: dwc3: omap: add basic suspend/resume support
usb: dwc3: pci: add basic suspend/resume support
usb: musb: core: remove unnecessary pr_info()
usb: musb: switch over to devm_ioremap_resource()
usb: musb: gadget: delete wrong comment
usb: musb: force PIO-only if we're building multiplatform kernels
usb: musb: make davinci and da8xx glues depend on BROKEN
usb: musb: dsps: add missing include
usb: musb: ux500_dma: kill compile warnings
usb: musb: dsps: fix possible compile warning
usb: musb: gadget: fix compile warning
usb: musb: Kconfig: drop unnecessary dependencies
usb: dwc3: core: remove bogus comment to our structure
usb: dwc3: add a flags field to event buffer
usb: dwc3: add count field to event buffer
usb: dwc3: gadget: move to threaded IRQ
usb: common: introduce usb_state_string()
usb: gadget: introduce gadget state tracking
usb: dwc3: gadget: implement gadget state tracking
usb: dwc3: remove our homebrew state mechanism
usb: dwc3: debugfs: add two missing Link States
usb: dwc3: debugfs: when unknown, print only the state value
usb: dwc3: debugfs: mark our regset structure const
usb: dwc3: debugfs: improve debugfs file creation
usb: dwc3: core: avoid checkpatch.pl warning
usb: gadget: pxa27x_udc: drop ARCH_PXA dependency
usb: gadget: pxa27x_udc: switch over to module_platform_driver
usb: gadget: udc-core: copy dma-related parameters from parent
usb: gadget: udc-core: initialize parent
usb: gadget: chipidea: remove unnecessary initializations
usb: gadget: amd5536udc: remove unnecessary initializations
usb: gadget: atmel_usba_udc: remove unnecessary initializations
usb: gadget: bcm63xx_udc: remove unnecessary initializations
usb: gadget: fusb300_udc: remove unnecessary initializations
usb: gadget: goku_udc: remove unnecessary initializations
usb: gadget: goku_udc: remove unused macro
usb: gadget: imx_udc: remove unnecessary initializations
usb: gadget: m66592-udc: remove unnecessary initializations
usb: dwc3: gadget: remove unnecessary initializations
usb: gadget: mv_u3d_core: remove unnecessary initializations
usb: gadget: mv_udc_core: remove unnecessary initializations
usb: gadget: net2272: remove unnecessary initializations
usb: gadget: net2280: remove unnecessary initializations
usb: gadget: omap_udc: remove unnecessary initializations
usb: gadget: pch_udc: remove unnecessary initializations
usb: gadget: pxa25x_udc: remove unnecessary initializations
usb: gadget: pxa27x_udc: remove unnecessary initializations
usb: gadget: r8a66597-udc: remove unnecessary initializations
usb: gadget: s3c-hsotg: remove unnecessary initializations
usb: gadget: s3c-hsudc: remove unnecessary initializations
usb: gadget: s3c2410_udc: remove unnecessary initializations
usb: musb: gadget: remove unnecessary initializations
usb: gadget: fsl_udc_core: remove unnecessary initializations
usb: gadget: udc-core: initialize gadget->dev.driver
usb: dwc3: gadget: don't touch gadget.dev.driver
usb: gadget: amd5536udc: don't touch gadget.dev.driver
usb: gadget: at91_udc: don't touch gadget.dev.driver
usb: gadget: atmel_usba_udc: don't touch gadget.dev.driver
usb: gadget: bcm63xx_udc: don't touch gadget.dev.driver
usb: gadget: dummy_hcd: don't touch gadget.dev.driver
usb: gadget: fsl_qe_udc: don't touch gadget.dev.driver
usb: gadget: fsl_udc_core: don't touch gadget.dev.driver
usb: gadget: fusb300_udc: don't touch gadget.dev.driver
usb: gadget: goku_udc: don't touch gadget.dev.driver
usb: gadget: imx_udc: don't touch gadget.dev.driver
usb: gadget: lpc32xx_udc: don't touch gadget.dev.driver
usb: gadget: m66592-udc: don't touch gadget.dev.driver
usb: gadget: mv_u3d_core: don't touch gadget.dev.driver
usb: gadget: mv_udc_core: don't touch gadget.dev.driver
usb: gadget: net2272: don't touch gadget.dev.driver
usb: gadget: net2280: don't touch gadget.dev.driver
usb: gadget: omap_udc: don't touch gadget.dev.driver
usb: gadget: pch_udc: don't touch gadget.dev.driver
usb: gadget: pxa25x_udc: don't touch gadget.dev.driver
usb: gadget: pxa27x_udc: don't touch gadget.dev.driver
usb: gadget: s3c-hsotg: don't touch gadget.dev.driver
usb: gadget: s3c-hsudc: don't touch gadget.dev.driver
usb: gadget: s3c2410_udc: don't touch gadget.dev.driver
usb: renesas: gadget: don't touch gadget.dev.driver
usb: gadget: udc-core: introduce usb_add_gadget_udc_release()
usb: chipidea: udc: don't assign gadget.dev.release directly
usb: dwc3: gadget: don't assign gadget.dev.release directly
usb: gadget: amd5536udc: don't assign gadget.dev.release directly
usb: gadget: bcm63xx_udc: don't assign gadget.dev.release directly
usb: gadget: dummy_hcd: don't assign gadget.dev.release directly
usb: gadget: fsl_qe_udc: don't assign gadget.dev.release directly
usb: gadget: fsl_udc_core: don't assign gadget.dev.release directly
usb: gadget: fusb300_udc: don't assign gadget.dev.release directly
usb: gadget: goku_udc: don't assign gadget.dev.release directly
usb: gadget: m66592-udc: don't assign gadget.dev.release directly
usb: gadget: mv_u3d_core: don't assign gadget.dev.release directly
usb: gadget: mv_udc_core: don't assign gadget.dev.release directly
usb: gadget: net2272: don't assign gadget.dev.release directly
usb: gadget: net2280: don't assign gadget.dev.release directly
usb: gadget: omap_udc: don't assign gadget.dev.release directly
usb: gadget: pch_udc: don't assign gadget.dev.release directly
usb: gadget: r8a66597-udc: don't assign gadget.dev.release directly
usb: gadget: s3c-hsotg: don't assign gadget.dev.release directly
usb: musb: gadget: don't assign gadget.dev.release directly
usb: renesas: gadget: don't assign gadget.dev.release directly
usb: gadget: udc-core: remove protection when setting gadget.dev.release
usb: gadget: udc-core: anywone can read 'speed' attributes
usb: dwc3: core: define more revisions
usb: dwc3: workaround: unexpected transtion U3 -> RESUME
usb: dwc3: calculate the number of endpoints
usb: dwc3: gadget: use num_(in|out)_eps from HW params
usb: otg: prefix otg_state_string with usb_
usb: otg: move usb_otg_state_string to usb-common.c
usb: phy: convert EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
usb: phy: move all PHY drivers to drivers/usb/phy/
usb: phy: make it a menuconfig
usb: power: pda_power: check against CONFIG_USB_PHY
usb: gadget: mv_udc_core: check against CONFIG_USB_PHY
usb: ehci: marvel: check against CONFIG_USB_PHY
usb: ehci: tegra: check against CONFIG_USB_PHY
usb: phy: remove CONFIG_USB_OTG_UTILS
usb: phy: rename all phy drivers to phy-$name-usb.c
usb: phy: isp1301: give it a context structure
usb: phy: introduce ->set_vbus() method
usb: phy: isp1301: implement PHY API
usb: gadget: atmel: remove unused DMA_ADDR_INVALID
usb: gadget: net2272: remove unused DMA_ADDR_INVALID
usb: gadget: net2280: remove unused DMA_ADDR_INVALID
usb: gadget: uvc: remove references to DMA_ADDR_INVALID
usb: renesas: remove unused DMA_ADDR_INVALID
usb: dwc3: omap: fix sparse warning
usb: phy: return -ENXIO when PHY layer isn't enabled
usb: dwc3: fix PHY error handling
usb: gadget: mv_udc_core: fix PHY error handling
usb: gadget: s3c-hsotg: fix PHY error handling
usb: musb: omap2430: fix PHY error handling
usb: host: ehci-msm: fix PHY error handling
usb: host: ehci-mv: fix PHY error handling
usb: host: ehci-s5p: fix PHY error handling
usb: host: ohci-exynos: fix PHY error handling
usb: phy: samsung: fix sparse warning
usb: phy: gpio-vbus: don't ignore regulator APIs return value
arm: tegra: fix Kconfig select clauses
usb: host: ehci-tegra: fix PHY error handling
usb: gadget: mv_u3d: remove unused headers
usb: gadget: mv_u3d: remove outdated selects
usb: gadget: mv_u3d: fix sparse warnings
usb: gadget: mv_u3d: drop ARCH dependency
usb: gadget: net2272: fix sparse warnings
usb: gadget: net2280: fix sparse warnings
usb: gadget: dummy: fix sparse warning
usb: gadget: pch_udc: fix sparse warnings
usb: gadget: mv_udc_core: fix sparse warnings
usb: gadget: mv_u3d: fix sparse warnings
usb: musb: ux500_dma: fix sparse warning
usb: chipidea: core: switch over to devm_ioremap_resource
usb: chipidea: don't redefine __ffs()
usb: gadget: mv_u3d_core: remove unused clock
usb: gadget: udc-core: prevent a memory leak
usb: gadget: pxa27x_udc: fix Section Mismatches
usb: gadget: nokia: include f_ecm.c
Filippo Turato (1):
USB: serial: option: Added support Olivetti Olicard 145
Florian Fainelli (5):
USB: regroup all depends on USB within an if USB block
USB: remove USB_EHCI_BIG_ENDIAN_{DESC,MMIO} depends on architecture symbol
USB: enclose EHCI HCD drivers within an if USB_EHCI_HCD block
USB: enclose all depends on USB_OHCI_HCD within an if USB_OHCI_HCD block
USB: enclose USB_XHCI_HCD related symbols within a if USB_XHCI_HCD block
Geoff Levand (1):
usb: PS3 EHCI remove unneeded ehci_shutdown
George Cherian (1):
usb: dwc3: core: fix wrong OTG event regitser offset
Grazvydas Ignotas (10):
usb: phy: twl4030-usb: don't enable PHY during init
usb: phy: twl4030-usb: ignore duplicate events
usb: phy: twl4030-usb: don't switch the phy on/off needlessly
usb: phy: twl4030-usb: poll for ID disconnect
usb: musb: core: honour initial transceiver state
usb: musb: gadget: clear gadget_driver when gadget is stopped
usb: musb: core: log VBUS error
usb: phy: twl4030-usb: check if vbus is driven by twl itself
usb: musb: omap2430: turn off vbus on cable disconnect
usb: musb: gadget: use platform callback to enable vbus
Greg Kroah-Hartman (12):
Staging: ccg: remove it from the build
Merge branch 'usb-linus' into usb-next
Merge 3.9-rc4 into usb-next
Merge branch 'usb-linus' into usb-next
Revert "USB: serial: fix hang when opening port"
Merge v3.9-rc5 into usb-next
Merge tag 'usb-for-v3.10' of git://git.kernel.org/.../balbi/usb into usb-next
Merge 3.9-rc6 into usb-next
Merge tag 'for-usb-next-2012-04-08' of git://git.kernel.org/.../sarah/xhci into usb-next
USB: serial: wishbone-serial: fix up minor sparse warning
USB: storage: convert to use module_usb_driver()
Merge tag 'usb-for-v3.10-part2' of git://git.kernel.org/.../balbi/usb into usb-next
Hans de Goede (1):
usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl ep
Huang Rui (1):
USB: fix an incorrect table index in comment
Jingoo Han (3):
usb: gadget: mv_u3d: make mv_u3d_pm_ops static
USB: ehci-spear: add CONFIG_PM_SLEEP to suspend/resume functions
usb: dwc3: add CONFIG_PM_SLEEP to suspend/resume functions
Jiri Slaby (1):
USB: io_ti, stop dereferencing potential NULL
Joe Perches (3):
usb: storage: Add usb_stor_dbg, reduce object size
usb: storage: Fix link error
usb: storage: Convert US_DEBUGP to usb_stor_dbg
Johan Hovold (113):
USB: ftdi_sio: remove obsolete port data refcounting
USB: kl5kusb105: remove unnecessary urb kill on close
USB: iuu_phoenix: remove unnecessary urb kill on close
USB: pl2303: use interface device for debug
USB: pl2303: make set_control_lines a port operation
USB: serial: rename tty-port callbacks
USB: serial: remove redundant comments
USB: serial: clean up debug info
USB: serial: remove redundant allocation error messages
USB: serial: remove port number from generic-driver debug
USB: ark3116: remove bogus disconnect test in close
USB: cyberjack: remove bogus disconnect test in close
USB: digi_acceleport: remove bogus disconnect test in close
USB: iuu_phoenix: remove bogus disconnect test in close
USB: keyspan: remove bogus disconnect test in close
USB: keyspan_pda: remove bogus disconnect test from dtr_rts
USB: keyspan_pda: remove bogus disconnect test in close
USB: mos7840: remove bogus disconnect test in close
USB: sierra: remove bogus disconnect test in close
USB: usb_wwan: remove bogus disconnect test in close
USB: serial: remove bogus disconnect test in cleanup
USB: ssu100: remove explicit initialisation of disconnect
USB: ssu100: remove custom close operation
USB: serial: fix generic disconnect implementation
USB: serial: remove generic disconnect callback
USB: serial: remove generic release callback
USB: serial: clean up generic-operation handling
USB: cyberjack: fix disconnect handling
USB: serial: fix port release
USB: serial: rename port release
USB: fix urb-poison imbalance
USB: serial: use urb poison to reliably kill traffic
USB: serial: clean up usb-serial bus device removal
USB: serial: add tiocmiwait subdriver operation
USB: serial: add generic TIOCMIWAIT implementation
USB: serial: wake up MSR-wait queue on disconnect
USB: serial: add generic get_icount implementation
USB: ftdi_sio: use port icount
USB: ftdi_sio: switch to generic TIOCMIWAIT implementation
USB: ftdi_sio: switch to generic get_icount implementation
USB: ark3116: switch to generic get_icount implementation
USB: ark3116: switch to generic TIOCMIWAIT implementation
USB: ch341: replace custom ioctl operation with tiocmiwait
USB: ch341: fix TIOCMIWAIT and disconnect
USB: cypress_m8: replace custom ioctl operation with tiocmiwait
USB: cypress_m8: fix TIOCMIWAIT and disconnect
USB: digi_acceleport: remove unused MSR-wait queue
USB: f81232: add custom tiocmiwait operation
USB: f81232: fix TIOCMIWAIT and disconnect
USB: io_edgeport: switch to generic get_icount implementation
USB: io_edgeport: switch to generic TIOCMIWAIT implementation
USB: io_ti: switch to generic get_icount implementation
USB: io_ti: switch to generic TIOCMIWAIT implementation
USB: iuu_phoenix: remove unused MSR-wait queue
USB: mct_u232: switch to generic get_icount implementation
USB: mct_u232: switch to generic TIOCMIWAIT implementation
USB: mos7720: remove broken get_icount and TIOCMIWAIT
USB: mos7840: remove smp barriers from icount handling
USB: mos7840: switch to generic get_icount implementation
USB: mos7840: switch to generic TIOCMIWAIT implementation
USB: oti6858: replace custom ioctl operation with tiocmiwait
USB: oti6858: fix TIOCMIWAIT and disconnect
USB: pl2303: add custom tiocmiwait operation
USB: pl2303: fix TIOCMIWAIT and disconnect
USB: quatech2: switch to generic get_icount implementation
USB: quatech2: switch to generic TIOCMIWAIT implementation
USB: spcp8x5: remove broken TIOCMIWAIT support
USB: spcp8x5: remove broken uart-error handling
USB: spcp8x5: clean up code
USB: spcp8x5: pass usb-serial port to control functions
USB: spcp8x5: clean up modem status retrieval
USB: spcp8x5: reimplement device type detection
USB: spcp8x5: add proper modem-status support
USB: ssu100: switch to generic get_icount implementation
USB: ssu100: switch to generic TIOCMIWAIT implementation
USB: ti_usb_3410_5052: switch to generic get_icount implementation
USB: ti_usb_3410_5052: switch to generic TIOCMIWAIT implementation
USB: serial: remove unused MSR-wait queue
USB: cp210x: always disable uart on close
USB: cypress_m8: remove bogus disconnect test from close
USB: io_ti: always disable uart on close
USB: kl5kusb105: always disable uart on close
USB: metro-usb: always disable uart on close
USB: mos7720: always disable uart on close
USB: opticon: fix return value of tiocmset
USB: opticon: remove disconnect test from tiocmset
USB: pl2303: fix return value of tiocmset
USB: pl2303: remove disconnect test from tiocmset
USB: quatech2: always disable uart on close
USB: visor: always disable uart on close
USB: garmin_gps: remove bogus disconnect test in close
USB: garmin_gps: remove bogus disconnect test in bulk callback
USB: iuu_phoenix: remove bogus disconnect test in close
USB: serial: update copyright information
USB: omninet: use kzalloc for private data
USB: omninet: clean up protocol description
USB: omninet: clean up protocol defines
USB: omninet: refactor read-urb processing
USB: omninet: switch to generic read implementation
USB: kobil_sct: fix broken debug code
USB: kobil_sct: remove unused endpoint address
USB: kobil_sct: use port interrupt-out urb
USB: mct_u232: clean up read implementation
USB: symbolserial: use port interrupt-in urb
USB: symbolserial: remove unused private data
USB: symbolserial: move private-data allocation to port_probe
USB: io_ti: fix TIOCGSERIAL
USB: io_ti: remove redundant wait_until_sent
USB: ti_usb_3410_5052: move write-fifo flushing to close
USB: ti_usb_3410_5052: remove lsr from port data
USB: ti_usb_3410_5052: query hardware-buffer status in chars_in_buffer
USB: ti_usb_3410_5052: remove redundant drain from break_ctl
USB: ti_usb_3410_5052: kill custom closing_wait
Julius Werner (1):
usb: Make USB persist default configurable
Kishon Vijay Abraham I (10):
usb: dwc3: omap: minor fixes to get dt working
usb: dwc3: omap: remove platform data associated with dwc3-omap
usb: dwc3: omap: stop using nop-usb-xceiv
usb: dwc3: set dma_mask for dwc3_omap device
usb: dwc3: dwc3-omap: return -EPROBE_DEFER if probe has not yet executed
usb: musb: omap2430: replace *_* with *-* in property names
usb: musb: omap: remove the check before calling otg_set_vbus
usb: musb: omap: add usb_phy_init in omap2430_musb_init
usb: phy: twl4030: use devres API for regulator get and request irq
usb: phy: twl4030: fix cold plug on OMAP3
Kuninori Morimoto (1):
usb: renesas_usbhs: fixup sparse errors for common.c
Laurent Pinchart (6):
usb: gadget: uvc: clarify comment about string descriptors
usb: gadget: uvc: Rename STATUS_BYTECOUNT to UVC_STATUS_MAX_PACKET_SIZE
usb: gadget: uvc: Fix coding style issues introduced by SS support
usb: gadget: uvc: Merge the SS/HS/FS control endpoint descriptors
usb: gadget: uvc: Merge the streaming maxpacket and mult parameters
usb: gadget: uvc: Configure the streaming endpoint based on the speed
Manjunath Goudar (5):
USB: EHCI: make ehci-orion a separate driver
USB: EHCI: make ehci-spear a separate driver
USB: EHCI: make ehci-s5p a separate driver
USB: EHCI: make ehci-atmel a separate driver
USB: EHCI: make ehci-msm a separate driver
Marc Kleine-Budde (4):
usb: phy: mxs: use readl(), writel() instead of the _relaxed() versions
usb: chipidea: usbmisc: unset global varibale usbmisc on driver remove
usb: chipidea: usbmisc: fix a potential race condition
usb: chipidea: usbmisc: prepare driver to handle more than one soc
Mian Yousaf Kaukab (1):
usb: phy: ab8500-usb: fix unbalanced clock and regulator disable warnings
Michael Grzeschik (12):
usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx
usb: chipidea: usbmisc: add mx53 support
usb: chipidea: usbmisc: add post handling and errata fix for mx25
usb: chipidea: udc: only clear active and halted bits in qhead
usb: chipidea: udc: rework ep_enable cap setting
usb: chipidea: udc: move ZLT flag change to ep_enable
usb: chipidea: udc: read status of td only once in hardware_dequeue
usb: chipidea: udc: don't truncate requests to single tds
usb: chipidea: udc: move _ep_queue into an unlocked function
usb: chipidea: udc: add the define TD_PAGE_COUNT and fix all users
usb: chipidea: udc: fix memory access of shared memory on armv5 machines
usb: chipidea: udc: fix memory leak in _ep_nuke
Ming Lei (8):
USB: adds comment on suspend callback
USB: serial: comments on suspend failure
USBHID: don't recover device if suspend fails in system sleep
usbnet: cdc_mbim: comments on suspend failure
usbnet: qmi_wwan: comments on suspend failure
usbnet: smsc95xx: don't recover device if suspend fails in system sleep
usbnet: smsc75xx: don't recover device if suspend fails in system sleep
USB: usbtmc: remove unnecessary memory allocation
Nishanth Menon (1):
USB: fix trivial usb_device kernel-doc errors
Nobuhiro Iwamatsu (2):
usb: ehci-sh: Fix build error due to comma has been deleted
usb: echi-sh: Remove driver variable which is not used
Patrice Chotard (1):
usb: phy: ab8500-usb: adopt pinctrl support
Paul Vlase (1):
usb: Use resource_size function
Peter Chen (1):
Revert "USB: chipidea: add vbus detect for udc"
Peter Hurley (1):
usb/serial: Remove unnecessary check for console
Ravi Babu (2):
usb: musb: dsps: print babble message only when musb is active host
usb: musb: gadget: read ep0 fifo only if rxcount is non zero
Roger Quadros (22):
USB: ehci-omap: Use devm_ioremap_resource()
USB: ehci-omap: Use PHY APIs to get the PHY device and put it out of suspend
USB: ehci-omap: Remove PHY reset handling code
USB: ehci-omap: Remove PHY regulator handling code
USB: ehci-omap: Select NOP USB transceiver driver
USB: ehci-omap: Get platform resources by index rather than by name
USB: ohci-omap3: Get platform resources by index rather than by name
USB: ohci-omap3: Add device tree support and binding information
USB: ehci-omap: Add device tree support and binding information
USB: ehci-omap: Try to get PHY even if not in PHY mode
USB: ehci-omap: Fix detection in HSIC mode
USB: ehci-omap: Get rid of omap_ehci_init()
usb: phy: nop: Add some parameters to platform data
usb: phy: nop: use devm_kzalloc()
usb: phy: nop: Manage PHY clock
usb: phy: nop: Handle power supply regulator for the PHY
usb: phy: nop: Handle RESET for the PHY
usb: phy: nop: use new PHY API to register PHY
usb: phy: nop: Add device tree support and binding information
USB: phy: nop: Defer probe if device needs VCC/RESET
USB: ehci-omap: Don't select any PHY driver
USB: ehci-omap: Improve PHY error handling
Ruslan Bilovol (1):
usb: musb: implement (un)map_urb_for_dma hooks
Sachin Kamat (2):
usb: gadget: fsl_udc_core: Use module_platform_driver_probe macro
usb: phy: samsung: convert to devm_ioremap_resource()
Sakethram Bommisetti (4):
usb: phy: ab8500-usb: set phy tuning values
usb: phy: ab8500-usb: fix eye diagram for ab8500 v2.0
usb: phy: ab8500-usb: drop link status delayed work
usb: phy: ab8500-usb: call phy_dis_work only when necessary
Samuel Tardieu (1):
USB: cdc-acm: Remove obsolete predefined speeds array
Sascha Hauer (2):
usb: phy: move bulk of otg/otg.c to phy/phy.c
usb: phy: mxs-phy: register phy with framework
Sebastian Andrzej Siewior (4):
usb: gadget: nokia: use function framework for ACM
usb: gadget: move the global the_dev variable to their users
usb: gadget: push tty port allocation from gadget into f_acm
usb: gadget: the start of the configfs interface
Shawn Guo (2):
ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
ARM: mxs_defconfig: add CONFIG_USB_PHY
Shengzhou Liu (1):
usb: remove redundant tdi_reset
Stefani Seibold (1):
USB: add ftdi_sio USB ID for GDM Boost V1.x
Svetoslav Neykov (1):
usb: chipidea: big-endian support
Syam Sidhardhan (2):
usb: serial: Remove redundant NULL check before kfree
usb: otg: fsl_otg: remove redundant NULL check before kfree
Thierry Reding (1):
usb: host: ehci-tegra: Fix oops in error cleanup
Thomas Abraham (1):
usb: ohci-exynos: skip phy setup for Exynos5440 based platforms
Tony Camuso (1):
xhci - clarify compliance mode debug messages
Tony Prisk (1):
usb: ehci: unlink_empty_async_suspended() only used with CONFIG_PM
Tormod Volden (1):
usb-storage: CY7C68300A chips do not support Cypress ATACB
Venu Byravarasu (1):
usb: host: tegra: Reset Tegra USB controller before init
Vikas Sajjan (1):
usb: dwc3: exynos: add basic suspend/resume support
Virupax Sadashivpetimath (1):
usb: musb: ux500_dma: add missing MEM resource check
Vivek Gautam (6):
usb: dwc3: set 'mode' based on selected Kconfig choices
usb: phy: samsung: Common out the generic stuff
usb: phy: samsung: Add PHY support for USB 3.0 controller
usb: dwc3: exynos: Use of_platform API to create dwc3 core pdev
usb: dwc3: exynos: use clk_prepare_enable and clk_disable_unprepare
usb: ehci-s5p: fix: Fix null pointer dereferencing
Wei Yongjun (5):
USB: misc: usb3503: use module_i2c_driver to simplify the code
usbatm: fix potential NULL pointer dereference
usb: gadget: f_obex: fix error return code in obex_bind()
usb: gadget: multi: fix error return code in rndis_do_config()
usb: gadget: cdc2: fix error return code in cdc_do_config()
Wesley W. Terpstra (1):
usb-serial: add support for USB Wishbone-serial adapters
Yuan-Hsin Chen (2):
usb: gadget: fusb300_udc: add FUSB300_EPSET0_STL_CLR for clearing EP0 stall
usb: gadget: fusb300_udc: bug fix of not doing idma reset for each time
Zhang Yanfei (1):
driver: usb: storage: remove cast for kmalloc return value
Documentation/ABI/testing/sysfs-bus-usb | 6 +-
.../devicetree/bindings/usb/ci13xxx-imx.txt | 2 +
.../devicetree/bindings/usb/ehci-omap.txt | 32 +
.../devicetree/bindings/usb/ohci-omap3.txt | 15 +
Documentation/devicetree/bindings/usb/omap-usb.txt | 40 +-
.../devicetree/bindings/usb/samsung-usbphy.txt | 76 +-
.../devicetree/bindings/usb/usb-nop-xceiv.txt | 34 +
Documentation/ioctl/ioctl-number.txt | 1 +
Documentation/usb/power-management.txt | 10 +-
arch/arm/Kconfig | 2 +
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm/configs/lpc32xx_defconfig | 1 +
arch/arm/configs/mxs_defconfig | 1 +
arch/arm/configs/omap1_defconfig | 1 +
arch/arm/mach-exynos/setup-usb-phy.c | 8 +-
arch/arm/mach-mmp/aspenite.c | 6 -
arch/arm/mach-mmp/ttc_dkb.c | 6 -
arch/arm/mach-s3c64xx/setup-usb-phy.c | 4 +-
arch/arm/mach-s5pv210/setup-usb-phy.c | 4 +-
arch/arm/mach-shmobile/board-armadillo800eva.c | 8 +-
arch/arm/mach-shmobile/board-kzm9g.c | 8 +-
arch/arm/mach-shmobile/board-mackerel.c | 12 +-
arch/arm/mach-tegra/Kconfig | 8 +-
arch/arm/plat-samsung/include/plat/usb-phy.h | 5 +-
arch/mips/Kconfig | 3 +
arch/powerpc/platforms/44x/Kconfig | 2 +
arch/powerpc/platforms/512x/Kconfig | 2 +
arch/sh/boards/mach-ecovec24/setup.c | 4 +-
arch/sparc/Kconfig | 2 +
drivers/Makefile | 2 +-
drivers/hid/usbhid/hid-core.c | 14 +-
drivers/net/usb/cdc_mbim.c | 5 +
drivers/net/usb/qmi_wwan.c | 5 +
drivers/net/usb/smsc75xx.c | 6 +-
drivers/net/usb/smsc95xx.c | 6 +-
drivers/power/Kconfig | 2 +-
drivers/power/pda_power.c | 14 +-
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/usb/Kconfig | 25 +-
drivers/usb/Makefile | 4 +-
drivers/usb/atm/Kconfig | 2 +-
drivers/usb/atm/usbatm.c | 6 +-
drivers/usb/chipidea/Makefile | 2 +-
drivers/usb/chipidea/ci.h | 19 +-
drivers/usb/chipidea/ci13xxx_imx.c | 12 +
drivers/usb/chipidea/ci13xxx_imx.h | 3 +
drivers/usb/chipidea/ci13xxx_pci.c | 6 +-
drivers/usb/chipidea/core.c | 66 +-
drivers/usb/chipidea/debug.c | 888 ++++-------------
drivers/usb/chipidea/debug.h | 34 +-
drivers/usb/chipidea/udc.c | 299 +++---
drivers/usb/chipidea/udc.h | 4 +-
drivers/usb/chipidea/usbmisc_imx.c | 261 +++++
drivers/usb/chipidea/usbmisc_imx6q.c | 162 ----
drivers/usb/class/Kconfig | 6 +-
drivers/usb/class/cdc-acm.c | 8 -
drivers/usb/class/cdc-wdm.c | 19 +
drivers/usb/class/usbtmc.c | 26 +-
drivers/usb/core/Kconfig | 36 +-
drivers/usb/core/devio.c | 2 +
drivers/usb/core/driver.c | 25 +-
drivers/usb/core/generic.c | 2 +-
drivers/usb/core/hcd-pci.c | 214 +++--
drivers/usb/core/hcd.c | 10 +-
drivers/usb/core/hub.c | 136 ++-
drivers/usb/core/port.c | 4 +-
drivers/usb/core/quirks.c | 16 +-
drivers/usb/core/sysfs.c | 4 +-
drivers/usb/core/urb.c | 5 +-
drivers/usb/core/usb.c | 4 +-
drivers/usb/core/usb.h | 2 +-
drivers/usb/dwc3/Kconfig | 1 -
drivers/usb/dwc3/core.c | 201 +++-
drivers/usb/dwc3/core.h | 72 +-
drivers/usb/dwc3/debugfs.c | 52 +-
drivers/usb/dwc3/dwc3-exynos.c | 98 +-
drivers/usb/dwc3/dwc3-omap.c | 245 +++--
drivers/usb/dwc3/dwc3-pci.c | 38 +
drivers/usb/dwc3/ep0.c | 33 +-
drivers/usb/dwc3/gadget.c | 321 +++++--
drivers/usb/gadget/Kconfig | 20 +-
drivers/usb/gadget/Makefile | 13 +-
drivers/usb/gadget/acm_ms.c | 15 +-
drivers/usb/gadget/amd5536udc.c | 16 +-
drivers/usb/gadget/amd5536udc.h | 1 -
drivers/usb/gadget/at91_udc.c | 14 +-
drivers/usb/gadget/atmel_usba_udc.c | 44 +-
drivers/usb/gadget/atmel_usba_udc.h | 6 -
drivers/usb/gadget/bcm63xx_udc.c | 23 -
drivers/usb/gadget/cdc2.c | 31 +-
drivers/usb/gadget/composite.c | 1 +
drivers/usb/gadget/configfs.c | 1003 ++++++++++++++++++++
drivers/usb/gadget/dummy_hcd.c | 19 +-
drivers/usb/gadget/ether.c | 20 +-
drivers/usb/gadget/f_acm.c | 137 +--
drivers/usb/gadget/f_ecm.c | 4 +-
drivers/usb/gadget/f_eem.c | 3 +-
drivers/usb/gadget/f_ncm.c | 4 +-
drivers/usb/gadget/f_obex.c | 227 ++++-
drivers/usb/gadget/f_rndis.c | 3 +-
drivers/usb/gadget/f_serial.c | 174 +++-
drivers/usb/gadget/f_sourcesink.c | 4 +-
drivers/usb/gadget/f_subset.c | 4 +-
drivers/usb/gadget/f_uvc.c | 262 +++--
drivers/usb/gadget/f_uvc.h | 12 +-
drivers/usb/gadget/fsl_qe_udc.c | 18 +-
drivers/usb/gadget/fsl_udc_core.c | 83 +-
drivers/usb/gadget/fusb300_udc.c | 46 +-
drivers/usb/gadget/fusb300_udc.h | 2 +-
drivers/usb/gadget/g_ffs.c | 35 +-
drivers/usb/gadget/goku_udc.c | 20 +-
drivers/usb/gadget/goku_udc.h | 3 +-
drivers/usb/gadget/imx_udc.c | 16 +-
drivers/usb/gadget/lpc32xx_udc.c | 51 +-
drivers/usb/gadget/m66592-udc.c | 17 -
drivers/usb/gadget/multi.c | 33 +-
drivers/usb/gadget/mv_u3d_core.c | 65 +-
drivers/usb/gadget/mv_udc.h | 3 +-
drivers/usb/gadget/mv_udc_core.c | 117 +--
drivers/usb/gadget/ncm.c | 13 +-
drivers/usb/gadget/net2272.c | 25 +-
drivers/usb/gadget/net2280.c | 25 +-
drivers/usb/gadget/nokia.c | 95 +-
drivers/usb/gadget/omap_udc.c | 21 +-
drivers/usb/gadget/pch_udc.c | 21 +-
drivers/usb/gadget/pxa25x_udc.c | 16 -
drivers/usb/gadget/pxa27x_udc.c | 51 +-
drivers/usb/gadget/r8a66597-udc.c | 14 +-
drivers/usb/gadget/s3c-hsotg.c | 78 +-
drivers/usb/gadget/s3c-hsudc.c | 16 -
drivers/usb/gadget/s3c2410_udc.c | 15 -
drivers/usb/gadget/serial.c | 59 +-
drivers/usb/gadget/u_ether.c | 32 +-
drivers/usb/gadget/u_ether.h | 27 +-
drivers/usb/gadget/u_serial.h | 1 -
drivers/usb/gadget/udc-core.c | 90 +-
drivers/usb/gadget/uvc.h | 3 +-
drivers/usb/gadget/uvc_queue.c | 538 ++++-------
drivers/usb/gadget/uvc_queue.h | 32 +-
drivers/usb/gadget/uvc_v4l2.c | 71 +-
drivers/usb/gadget/uvc_video.c | 31 +-
drivers/usb/gadget/zero.c | 2 +
drivers/usb/host/Kconfig | 217 +++--
drivers/usb/host/Makefile | 6 +
drivers/usb/host/ehci-atmel.c | 88 +-
drivers/usb/host/ehci-dbg.c | 15 +-
drivers/usb/host/ehci-fsl.c | 9 +
drivers/usb/host/ehci-hcd.c | 107 +--
drivers/usb/host/ehci-hub.c | 23 +-
drivers/usb/host/ehci-msm.c | 91 +-
drivers/usb/host/ehci-mv.c | 56 +-
drivers/usb/host/ehci-mxc.c | 10 +-
drivers/usb/host/ehci-omap.c | 331 +++----
drivers/usb/host/ehci-orion.c | 86 +-
drivers/usb/host/ehci-pci.c | 14 +-
drivers/usb/host/ehci-platform.c | 36 +-
drivers/usb/host/ehci-ps3.c | 1 -
drivers/usb/host/ehci-q.c | 241 ++---
drivers/usb/host/ehci-s5p.c | 180 ++--
drivers/usb/host/ehci-sched.c | 40 +-
drivers/usb/host/ehci-sh.c | 5 +-
drivers/usb/host/ehci-spear.c | 119 ++-
drivers/usb/host/ehci-tegra.c | 34 +-
drivers/usb/host/ehci-timer.c | 72 +-
drivers/usb/host/ehci-vt8500.c | 150 ---
drivers/usb/host/ehci.h | 16 +-
drivers/usb/host/ohci-exynos.c | 14 +-
drivers/usb/host/ohci-hcd.c | 136 ++-
drivers/usb/host/ohci-hub.c | 6 -
drivers/usb/host/ohci-omap3.c | 24 +-
drivers/usb/host/sl811-hcd.c | 2 +-
drivers/usb/host/u132-hcd.c | 9 +-
drivers/usb/host/xhci-hub.c | 2 +-
drivers/usb/host/xhci-mem.c | 16 +-
drivers/usb/host/xhci.c | 18 +-
drivers/usb/host/xhci.h | 4 +-
drivers/usb/image/Kconfig | 4 +-
drivers/usb/misc/Kconfig | 21 -
drivers/usb/misc/appledisplay.c | 1 +
drivers/usb/misc/sisusbvga/Kconfig | 2 +-
drivers/usb/misc/sisusbvga/sisusb.c | 2 +-
drivers/usb/misc/usb3503.c | 13 +-
drivers/usb/mon/Kconfig | 1 -
drivers/usb/musb/Kconfig | 8 +-
drivers/usb/musb/am35x.c | 8 +-
drivers/usb/musb/blackfin.c | 6 +-
drivers/usb/musb/cppi_dma.c | 17 +-
drivers/usb/musb/da8xx.c | 8 +-
drivers/usb/musb/davinci.c | 4 +-
drivers/usb/musb/musb_core.c | 71 +-
drivers/usb/musb/musb_dsps.c | 14 +-
drivers/usb/musb/musb_gadget.c | 156 +--
drivers/usb/musb/musb_gadget_ep0.c | 6 +-
drivers/usb/musb/musb_host.c | 119 ++-
drivers/usb/musb/musb_virthub.c | 4 +-
drivers/usb/musb/omap2430.c | 32 +-
drivers/usb/musb/tusb6010.c | 14 +-
drivers/usb/musb/ux500.c | 106 +++
drivers/usb/musb/ux500_dma.c | 24 +-
drivers/usb/otg/Kconfig | 141 ---
drivers/usb/otg/Makefile | 24 -
drivers/usb/otg/ab8500-usb.c | 596 ------------
drivers/usb/phy/Kconfig | 180 +++-
drivers/usb/phy/Makefile | 35 +-
drivers/usb/phy/isp1301.c | 71 --
drivers/usb/phy/phy-ab8500-usb.c | 924 ++++++++++++++++++
drivers/usb/{otg/fsl_otg.c => phy/phy-fsl-usb.c} | 34 +-
drivers/usb/{otg/fsl_otg.h => phy/phy-fsl-usb.h} | 0
drivers/usb/{otg/otg_fsm.c => phy/phy-fsm-usb.c} | 4 +-
drivers/usb/{otg/otg_fsm.h => phy/phy-fsm-usb.h} | 0
.../{otg/gpio_vbus.c => phy/phy-gpio-vbus-usb.c} | 9 +-
.../{otg/isp1301_omap.c => phy/phy-isp1301-omap.c} | 10 +-
drivers/usb/phy/phy-isp1301.c | 162 ++++
drivers/usb/{otg/msm_otg.c => phy/phy-msm-usb.c} | 0
drivers/usb/phy/{mv_u3d_phy.c => phy-mv-u3d-usb.c} | 4 +-
drivers/usb/phy/{mv_u3d_phy.h => phy-mv-u3d-usb.h} | 0
drivers/usb/{otg/mv_otg.c => phy/phy-mv-usb.c} | 30 +-
drivers/usb/{otg/mv_otg.h => phy/phy-mv-usb.h} | 3 +-
drivers/usb/{otg/mxs-phy.c => phy/phy-mxs-usb.c} | 41 +-
drivers/usb/{otg/nop-usb-xceiv.c => phy/phy-nop.c} | 143 ++-
.../phy/{omap-control-usb.c => phy-omap-control.c} | 0
drivers/usb/phy/{omap-usb2.c => phy-omap-usb2.c} | 0
drivers/usb/phy/{omap-usb3.c => phy-omap-usb3.c} | 0
drivers/usb/phy/{rcar-phy.c => phy-rcar-usb.c} | 0
drivers/usb/phy/phy-samsung-usb.c | 236 +++++
drivers/usb/phy/phy-samsung-usb.h | 327 +++++++
drivers/usb/phy/phy-samsung-usb2.c | 509 ++++++++++
drivers/usb/phy/phy-samsung-usb3.c | 347 +++++++
.../usb/phy/{tegra_usb_phy.c => phy-tegra-usb.c} | 13 +-
.../{otg/twl4030-usb.c => phy/phy-twl4030-usb.c} | 178 ++--
.../{otg/twl6030-usb.c => phy/phy-twl6030-usb.c} | 15 +-
.../ulpi_viewport.c => phy/phy-ulpi-viewport.c} | 0
drivers/usb/{otg/ulpi.c => phy/phy-ulpi.c} | 0
drivers/usb/{otg/otg.c => phy/phy.c} | 64 +-
drivers/usb/phy/samsung-usbphy.c | 928 ------------------
drivers/usb/renesas_usbhs/Kconfig | 2 +-
drivers/usb/renesas_usbhs/fifo.c | 1 -
drivers/usb/renesas_usbhs/fifo.h | 2 -
drivers/usb/renesas_usbhs/mod_gadget.c | 24 +-
drivers/usb/serial/Kconfig | 19 +-
drivers/usb/serial/Makefile | 1 +
drivers/usb/serial/ark3116.c | 87 +-
drivers/usb/serial/bus.c | 5 +-
drivers/usb/serial/ch341.c | 30 +-
drivers/usb/serial/cp210x.c | 6 +-
drivers/usb/serial/cyberjack.c | 19 +-
drivers/usb/serial/cypress_m8.c | 94 +-
drivers/usb/serial/digi_acceleport.c | 95 +-
drivers/usb/serial/f81232.c | 13 +-
drivers/usb/serial/ftdi_sio.c | 144 +--
drivers/usb/serial/ftdi_sio_ids.h | 4 +-
drivers/usb/serial/garmin_gps.c | 10 -
drivers/usb/serial/generic.c | 144 ++-
drivers/usb/serial/io_edgeport.c | 76 +-
drivers/usb/serial/io_tables.h | 12 +-
drivers/usb/serial/io_ti.c | 98 +-
drivers/usb/serial/iuu_phoenix.c | 21 +-
drivers/usb/serial/keyspan.c | 96 +-
drivers/usb/serial/keyspan_pda.c | 19 +-
drivers/usb/serial/kl5kusb105.c | 30 +-
drivers/usb/serial/kobil_sct.c | 103 +-
drivers/usb/serial/mct_u232.c | 131 +--
drivers/usb/serial/metro-usb.c | 5 +-
drivers/usb/serial/mos7720.c | 68 +-
drivers/usb/serial/mos7840.c | 157 +--
drivers/usb/serial/omninet.c | 81 +-
drivers/usb/serial/opticon.c | 18 +-
drivers/usb/serial/option.c | 8 +
drivers/usb/serial/oti6858.c | 30 +-
drivers/usb/serial/pl2303.c | 39 +-
drivers/usb/serial/quatech2.c | 104 +-
drivers/usb/serial/sierra.c | 39 +-
drivers/usb/serial/spcp8x5.c | 301 ++----
drivers/usb/serial/ssu100.c | 100 +-
drivers/usb/serial/symbolserial.c | 130 +--
drivers/usb/serial/ti_usb_3410_5052.c | 163 +---
drivers/usb/serial/usb-serial.c | 232 +++--
drivers/usb/serial/usb_wwan.c | 25 +-
drivers/usb/serial/visor.c | 16 +-
drivers/usb/serial/wishbone-serial.c | 95 ++
drivers/usb/storage/Kconfig | 7 +-
drivers/usb/storage/alauda.c | 101 +-
drivers/usb/storage/cypress_atacb.c | 18 +-
drivers/usb/storage/datafab.c | 59 +-
drivers/usb/storage/debug.c | 36 +-
drivers/usb/storage/debug.h | 23 +-
drivers/usb/storage/ene_ub6250.c | 86 +-
drivers/usb/storage/freecom.c | 85 +-
drivers/usb/storage/initializers.c | 10 +-
drivers/usb/storage/isd200.c | 295 +++---
drivers/usb/storage/jumpshot.c | 69 +-
drivers/usb/storage/karma.c | 6 +-
drivers/usb/storage/onetouch.c | 4 +-
drivers/usb/storage/option_ms.c | 23 +-
drivers/usb/storage/realtek_cr.c | 128 +--
drivers/usb/storage/scsiglue.c | 13 +-
drivers/usb/storage/sddr09.c | 146 ++-
drivers/usb/storage/sddr55.c | 86 +-
drivers/usb/storage/shuttle_usbat.c | 119 +--
drivers/usb/storage/sierra_ms.c | 43 +-
drivers/usb/storage/transport.c | 181 ++--
drivers/usb/storage/usb.c | 117 +--
drivers/usb/usb-common.c | 47 +
drivers/usb/usb-skeleton.c | 32 +-
drivers/usb/wusbcore/Kconfig | 2 -
include/linux/platform_data/dwc3-omap.h | 4 -
include/linux/platform_data/mv_usb.h | 2 -
include/linux/usb.h | 13 +-
include/linux/usb/cdc-wdm.h | 2 +
include/linux/usb/ch9.h | 9 +
include/linux/usb/composite.h | 3 +
include/linux/usb/dwc3-omap.h | 6 +-
include/linux/usb/gadget.h | 11 +
include/linux/usb/gadget_configfs.h | 110 +++
include/linux/usb/hcd.h | 6 +-
include/linux/usb/musb-ux500.h | 31 +
include/linux/usb/nop-usb-xceiv.h | 5 +
include/linux/usb/otg.h | 9 +-
include/linux/usb/phy.h | 33 +-
include/linux/usb/renesas_usbhs.h | 6 +-
include/linux/usb/serial.h | 12 +-
include/linux/usb/tegra_usb_phy.h | 10 +-
include/uapi/linux/usb/cdc-wdm.h | 21 +
include/uapi/linux/usb/ch9.h | 4 +-
325 files changed, 10498 insertions(+), 9858 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/ehci-omap.txt
create mode 100644 Documentation/devicetree/bindings/usb/ohci-omap3.txt
create mode 100644 Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
create mode 100644 drivers/usb/chipidea/usbmisc_imx.c
delete mode 100644 drivers/usb/chipidea/usbmisc_imx6q.c
create mode 100644 drivers/usb/gadget/configfs.c
delete mode 100644 drivers/usb/host/ehci-vt8500.c
delete mode 100644 drivers/usb/otg/Kconfig
delete mode 100644 drivers/usb/otg/Makefile
delete mode 100644 drivers/usb/otg/ab8500-usb.c
delete mode 100644 drivers/usb/phy/isp1301.c
create mode 100644 drivers/usb/phy/phy-ab8500-usb.c
rename drivers/usb/{otg/fsl_otg.c => phy/phy-fsl-usb.c} (97%)
rename drivers/usb/{otg/fsl_otg.h => phy/phy-fsl-usb.h} (100%)
rename drivers/usb/{otg/otg_fsm.c => phy/phy-fsm-usb.c} (99%)
rename drivers/usb/{otg/otg_fsm.h => phy/phy-fsm-usb.h} (100%)
rename drivers/usb/{otg/gpio_vbus.c => phy/phy-gpio-vbus-usb.c} (98%)
rename drivers/usb/{otg/isp1301_omap.c => phy/phy-isp1301-omap.c} (99%)
create mode 100644 drivers/usb/phy/phy-isp1301.c
rename drivers/usb/{otg/msm_otg.c => phy/phy-msm-usb.c} (100%)
rename drivers/usb/phy/{mv_u3d_phy.c => phy-mv-u3d-usb.c} (99%)
rename drivers/usb/phy/{mv_u3d_phy.h => phy-mv-u3d-usb.h} (100%)
rename drivers/usb/{otg/mv_otg.c => phy/phy-mv-usb.c} (97%)
rename drivers/usb/{otg/mv_otg.h => phy/phy-mv-usb.h} (99%)
rename drivers/usb/{otg/mxs-phy.c => phy/phy-mxs-usb.c} (84%)
rename drivers/usb/{otg/nop-usb-xceiv.c => phy/phy-nop.c} (55%)
rename drivers/usb/phy/{omap-control-usb.c => phy-omap-control.c} (100%)
rename drivers/usb/phy/{omap-usb2.c => phy-omap-usb2.c} (100%)
rename drivers/usb/phy/{omap-usb3.c => phy-omap-usb3.c} (100%)
rename drivers/usb/phy/{rcar-phy.c => phy-rcar-usb.c} (100%)
create mode 100644 drivers/usb/phy/phy-samsung-usb.c
create mode 100644 drivers/usb/phy/phy-samsung-usb.h
create mode 100644 drivers/usb/phy/phy-samsung-usb2.c
create mode 100644 drivers/usb/phy/phy-samsung-usb3.c
rename drivers/usb/phy/{tegra_usb_phy.c => phy-tegra-usb.c} (98%)
rename drivers/usb/{otg/twl4030-usb.c => phy/phy-twl4030-usb.c} (84%)
rename drivers/usb/{otg/twl6030-usb.c => phy/phy-twl6030-usb.c} (97%)
rename drivers/usb/{otg/ulpi_viewport.c => phy/phy-ulpi-viewport.c} (100%)
rename drivers/usb/{otg/ulpi.c => phy/phy-ulpi.c} (100%)
rename drivers/usb/{otg/otg.c => phy/phy.c} (88%)
delete mode 100644 drivers/usb/phy/samsung-usbphy.c
create mode 100644 drivers/usb/serial/wishbone-serial.c
create mode 100644 include/linux/usb/gadget_configfs.h
create mode 100644 include/linux/usb/musb-ux500.h
create mode 100644 include/uapi/linux/usb/cdc-wdm.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists