| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 10 Jun 2013 11:05:40 +0100
From: Lee Jones <lee.jones@...aro.org>
To: J Keerthy <j-keerthy@...com>
Cc: b-cousson@...com, devicetree-discuss@...ts.ozlabs.org,
linux-omap@...r.kernel.org, linux-kernel@...r.kernel.org,
ldewangan@...dia.com, grant.likely@...retlab.ca,
swarren@...dotorg.org, swarren@...dia.com, sameo@...ux.intel.com,
gg@...mlogic.co.uk
Subject: Re: [PATCH v2 2/2] ARM: dts: OMAP5: add palmas node and omap
specific palmas regulator properties
On Mon, 10 Jun 2013, J Keerthy wrote:
> Add palmas node and omap specific palmas regulator properties.
>
> Signed-off-by: J Keerthy <j-keerthy@...com>
> ---
> arch/arm/boot/dts/omap5-uevm.dts | 147 ++++++++++++++++++++++++++++++++++++++
> 1 files changed, 147 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
> index 927db1e..ffbcc3f 100644
> --- a/arch/arm/boot/dts/omap5-uevm.dts
> +++ b/arch/arm/boot/dts/omap5-uevm.dts
> @@ -8,6 +8,8 @@
> /dts-v1/;
>
> #include "omap5.dtsi"
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>
> / {
> model = "TI OMAP5 uEVM board";
> @@ -254,6 +256,151 @@
> pinctrl-0 = <&i2c1_pins>;
>
> clock-frequency = <400000>;
> +
> + palmas: palmas@48 {
> + reg = <0x48>;
> + /* SPI = 0, IRQ# = 7, active high level-sensitive */
I still think this is superfluous, especially now you're using the
defines which basically say the same thing.
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N */
> + interrupt-parent = <&gic>;
> + };
> +
> +};
> +
> +#include "palmas.dtsi"
> +
> +&palmas {
> + palmas_pmic {
> + ti,ldo6-vibrator;
> +
> + regulators {
> + smps123_reg: smps123 {
> + regulator-min-microvolt = < 600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps45_reg: smps45 {
> + regulator-min-microvolt = < 600000>;
> + regulator-max-microvolt = <1310000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps6_reg: smps6 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps7_reg: smps7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps8_reg: smps8 {
> + regulator-min-microvolt = < 600000>;
> + regulator-max-microvolt = <1310000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps9_reg: smps9 {
> + regulator-min-microvolt = <2100000>;
> + regulator-max-microvolt = <2100000>;
> + regulator-always-on;
> + regulator-boot-on;
> + ti,smps-range = <0x80>;
> + };
> +
> + smps10_reg: smps10 {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo1_reg: ldo1 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo2_reg: ldo2 {
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <2900000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo3_reg: ldo3 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo4_reg: ldo4 {
> + regulator-min-microvolt = <2200000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo5_reg: ldo5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo6_reg: ldo6 {
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo7_reg: ldo7 {
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo8_reg: ldo8 {
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo9_reg: ldo9 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldoln_reg: ldoln {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldousb_reg: ldousb {
> + regulator-min-microvolt = <3250000>;
> + regulator-max-microvolt = <3250000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + };
> + };
> };
>
> &i2c5 {
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists