| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 16 Jul 2013 11:04:09 +0900
From: Jingoo Han <jg1.han@...sung.com>
To: 'Maxime Ripard' <maxime.ripard@...e-electrons.com>,
'Andrew Morton' <akpm@...ux-foundation.org>
Cc: 'Alexandre Belloni' <alexandre.belloni@...e-electrons.com>,
hector.palacios@...i.com,
'Thomas Petazzoni' <thomas@...e-electrons.com>,
plagnioj@...osoft.com, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-fbdev@...r.kernel.org,
Jingoo Han <jg1.han@...sung.com>
Subject: Re: [PATCH 3/3] fb: backlight: HX8357: Add HX8369 support
On Tuesday, July 16, 2013 12:27 AM, Maxime Ripard wrote:
>
> From: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
>
> Add support for the Himax HX8369 controller as it is quite similar to the
> hx8357.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
> Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
Hi Maxime Ripard,
I reviewed this patch with Himax HX8369 datasheet.
I cannot find any problems. It looks good.
However, if possible, please add comment on huge delays such as
msleep(120), msleep(100), etc.
Acked-by: Jingoo Han <jg1.han@...sung.com>
Best regards,
Jingoo Han
> ---
> drivers/video/backlight/hx8357.c | 203 ++++++++++++++++++++++++++++++++++++---
> 1 file changed, 188 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
> index ed94796..b035fab 100644
> --- a/drivers/video/backlight/hx8357.c
> +++ b/drivers/video/backlight/hx8357.c
> @@ -71,6 +71,18 @@
> #define HX8357_SET_POWER_NORMAL 0xd2
> #define HX8357_SET_PANEL_RELATED 0xe9
>
> +#define HX8369_SET_DISPLAY_BRIGHTNESS 0x51
> +#define HX8369_WRITE_CABC_DISPLAY_VALUE 0x53
> +#define HX8369_WRITE_CABC_BRIGHT_CTRL 0x55
> +#define HX8369_WRITE_CABC_MIN_BRIGHTNESS 0x5e
> +#define HX8369_SET_POWER 0xb1
> +#define HX8369_SET_DISPLAY_MODE 0xb2
> +#define HX8369_SET_DISPLAY_WAVEFORM_CYC 0xb4
> +#define HX8369_SET_VCOM 0xb6
> +#define HX8369_SET_EXTENSION_COMMAND 0xb9
> +#define HX8369_SET_GIP 0xd5
> +#define HX8369_SET_GAMMA_CURVE_RELATED 0xe0
> +
> struct hx8357_data {
> unsigned im_pins[HX8357_NUM_IM_PINS];
> unsigned reset;
> @@ -144,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = {
> HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
> };
>
> +static u8 hx8369_seq_write_CABC_min_brightness[] = {
> + HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
> +};
> +
> +static u8 hx8369_seq_write_CABC_control[] = {
> + HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
> +};
> +
> +static u8 hx8369_seq_set_display_brightness[] = {
> + HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
> +};
> +
> +static u8 hx8369_seq_write_CABC_control_setting[] = {
> + HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
> +};
> +
> +static u8 hx8369_seq_extension_command[] = {
> + HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
> +};
> +
> +static u8 hx8369_seq_display_related[] = {
> + HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
> + 0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00, 0x01,
> +};
> +
> +static u8 hx8369_seq_panel_waveform_cycle[] = {
> + HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
> +};
> +
> +static u8 hx8369_seq_set_address_mode[] = {
> + HX8357_SET_ADDRESS_MODE, 0x00,
> +};
> +
> +static u8 hx8369_seq_vcom[] = {
> + HX8369_SET_VCOM, 0x3e, 0x3e,
> +};
> +
> +static u8 hx8369_seq_gip[] = {
> + HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
> + 0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
> + 0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
> +};
> +
> +static u8 hx8369_seq_power[] = {
> + HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
> + 0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
> +};
> +
> +static u8 hx8369_seq_gamma_curve_related[] = {
> + HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
> + 0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
> + 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
> + 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
> +};
> +
> static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
> u8 *txbuf, u16 txlen,
> u8 *rxbuf, u16 rxlen)
> @@ -242,6 +309,18 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
> return 0;
> }
>
> +static void hx8357_lcd_reset(struct lcd_device *lcdev)
> +{
> + struct hx8357_data *lcd = lcd_get_data(lcdev);
> +
> + gpio_set_value(lcd->reset, 1);
> + usleep_range(10000, 12000);
> + gpio_set_value(lcd->reset, 0);
> + usleep_range(10000, 12000);
> + gpio_set_value(lcd->reset, 1);
> + msleep(120);
> +}
> +
> static int hx8357_lcd_init(struct lcd_device *lcdev)
> {
> struct hx8357_data *lcd = lcd_get_data(lcdev);
> @@ -257,14 +336,6 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
> gpio_set_value_cansleep(lcd->im_pins[2], 1);
> }
>
> - /* Reset the screen */
> - gpio_set_value(lcd->reset, 1);
> - usleep_range(10000, 12000);
> - gpio_set_value(lcd->reset, 0);
> - usleep_range(10000, 12000);
> - gpio_set_value(lcd->reset, 1);
> - msleep(120);
> -
> ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
> ARRAY_SIZE(hx8357_seq_power));
> if (ret < 0)
> @@ -359,6 +430,94 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
> return 0;
> }
>
> +static int hx8369_lcd_init(struct lcd_device *lcdev)
> +{
> + int ret;
> +
> + ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
> + ARRAY_SIZE(hx8369_seq_extension_command));
> + if (ret < 0)
> + return ret;
> + usleep_range(10000, 12000);
> +
> + ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
> + ARRAY_SIZE(hx8369_seq_display_related));
> + if (ret < 0)
> + return ret;
> +
> + ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
> + ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
> + if (ret < 0)
> + return ret;
> +
> + ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
> + ARRAY_SIZE(hx8369_seq_set_address_mode));
> + if (ret < 0)
> + return ret;
> +
> + ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
> + ARRAY_SIZE(hx8369_seq_vcom));
> + if (ret < 0)
> + return ret;
> +
> + ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
> + ARRAY_SIZE(hx8369_seq_gip));
> + if (ret < 0)
> + return ret;
> +
> + ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
> + ARRAY_SIZE(hx8369_seq_power));
> + if (ret < 0)
> + return ret;
> +
> + ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
> + if (ret < 0)
> + return ret;
> +
> + msleep(120);
> +
> + ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
> + ARRAY_SIZE(hx8369_seq_gamma_curve_related));
> + if (ret < 0)
> + return ret;
> +
> + ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
> + if (ret < 0)
> + return ret;
> + usleep_range(1000, 1200);
> +
> + ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
> + ARRAY_SIZE(hx8369_seq_write_CABC_control));
> + if (ret < 0)
> + return ret;
> + usleep_range(10000, 12000);
> +
> + ret = hx8357_spi_write_array(lcdev,
> + hx8369_seq_write_CABC_control_setting,
> + ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
> + if (ret < 0)
> + return ret;
> +
> + ret = hx8357_spi_write_array(lcdev,
> + hx8369_seq_write_CABC_min_brightness,
> + ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
> + if (ret < 0)
> + return ret;
> + usleep_range(10000, 12000);
> +
> + ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
> + ARRAY_SIZE(hx8369_seq_set_display_brightness));
> + if (ret < 0)
> + return ret;
> +
> + ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
> + if (ret < 0)
> + return ret;
> + msleep(100);
> +
> + return 0;
> +}
> +
> #define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
>
> static int hx8357_set_power(struct lcd_device *lcdev, int power)
> @@ -391,10 +550,24 @@ static struct lcd_ops hx8357_ops = {
> .get_power = hx8357_get_power,
> };
>
> +static const struct of_device_id hx8357_dt_ids[] = {
> + {
> + .compatible = "himax,hx8357",
> + .data = hx8357_lcd_init,
> + },
> + {
> + .compatible = "himax,hx8369",
> + .data = hx8369_lcd_init,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
> +
> static int hx8357_probe(struct spi_device *spi)
> {
> struct lcd_device *lcdev;
> struct hx8357_data *lcd;
> + const struct of_device_id *match;
> int i, ret;
>
> lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
> @@ -411,6 +584,10 @@ static int hx8357_probe(struct spi_device *spi)
>
> lcd->spi = spi;
>
> + match = of_match_device(hx8357_dt_ids, &spi->dev);
> + if (!match || !match->data)
> + return -EINVAL;
> +
> lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
> if (!gpio_is_valid(lcd->reset)) {
> dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
> @@ -460,7 +637,9 @@ static int hx8357_probe(struct spi_device *spi)
> }
> spi_set_drvdata(spi, lcdev);
>
> - ret = hx8357_lcd_init(lcdev);
> + hx8357_lcd_reset(lcdev);
> +
> + ret = ((int (*)(struct lcd_device *))match->data)(lcdev);
> if (ret) {
> dev_err(&spi->dev, "Couldn't initialize panel\n");
> goto init_error;
> @@ -483,12 +662,6 @@ static int hx8357_remove(struct spi_device *spi)
> return 0;
> }
>
> -static const struct of_device_id hx8357_dt_ids[] = {
> - { .compatible = "himax,hx8357" },
> - {},
> -};
> -MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
> -
> static struct spi_driver hx8357_driver = {
> .probe = hx8357_probe,
> .remove = hx8357_remove,
> --
> 1.8.3.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists