| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 3 Aug 2013 15:19:35 +0200
From: Jon Arne Jørgensen <jonarne@...arne.no>
To: linux-media@...r.kernel.org
Cc: jonarne@...arne.no, linux-kernel@...r.kernel.org,
m.chehab@...sung.com, hans.verkuil@...co.com,
prabhakar.csengg@...il.com, laurent.pinchart@...asonboard.com,
andriy.shevchenko@...ux.intel.com,
ezequiel.garcia@...e-electrons.com, timo.teras@....fi
Subject: [RFC v4 1/3] saa7115: Fix saa711x_set_v4lstd for gm7113c
saa711x_set_v4lstd would toggle several bits that should not be touched
when changing std. This patch fixes this.
Signed-off-by: Jon Arne Jørgensen <jonarne@...arne.no>
---
drivers/media/i2c/saa7115.c | 37 +++++++++++++------------------------
drivers/media/i2c/saa711x_regs.h | 4 ++++
2 files changed, 17 insertions(+), 24 deletions(-)
diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
index 7fd766e..41408dd 100644
--- a/drivers/media/i2c/saa7115.c
+++ b/drivers/media/i2c/saa7115.c
@@ -462,24 +462,6 @@ static const unsigned char saa7115_cfg_50hz_video[] = {
/* ============== SAA7715 VIDEO templates (end) ======= */
-/* ============== GM7113C VIDEO templates ============= */
-static const unsigned char gm7113c_cfg_60hz_video[] = {
- R_08_SYNC_CNTL, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */
- R_0E_CHROMA_CNTL_1, 0x07, /* video autodetection is on */
-
- 0x00, 0x00
-};
-
-static const unsigned char gm7113c_cfg_50hz_video[] = {
- R_08_SYNC_CNTL, 0x28, /* 0x28 = PAL */
- R_0E_CHROMA_CNTL_1, 0x07,
-
- 0x00, 0x00
-};
-
-/* ============== GM7113C VIDEO templates (end) ======= */
-
-
static const unsigned char saa7115_cfg_vbi_on[] = {
R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */
R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */
@@ -964,17 +946,24 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std)
// This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
if (std & V4L2_STD_525_60) {
v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n");
- if (state->ident == GM7113C)
- saa711x_writeregs(sd, gm7113c_cfg_60hz_video);
- else
+ if (state->ident == GM7113C) {
+ u8 reg = saa711x_read(sd, R_08_SYNC_CNTL);
+ reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD);
+ reg |= SAA7113_R_08_FSEL;
+ saa711x_write(sd, R_08_SYNC_CNTL, reg);
+ } else {
saa711x_writeregs(sd, saa7115_cfg_60hz_video);
+ }
saa711x_set_size(sd, 720, 480);
} else {
v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n");
- if (state->ident == GM7113C)
- saa711x_writeregs(sd, gm7113c_cfg_50hz_video);
- else
+ if (state->ident == GM7113C) {
+ u8 reg = saa711x_read(sd, R_08_SYNC_CNTL);
+ reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD);
+ saa711x_write(sd, R_08_SYNC_CNTL, reg);
+ } else {
saa711x_writeregs(sd, saa7115_cfg_50hz_video);
+ }
saa711x_set_size(sd, 720, 576);
}
diff --git a/drivers/media/i2c/saa711x_regs.h b/drivers/media/i2c/saa711x_regs.h
index 4e5f2eb..70c56d1 100644
--- a/drivers/media/i2c/saa711x_regs.h
+++ b/drivers/media/i2c/saa711x_regs.h
@@ -201,6 +201,10 @@
#define R_FB_PULSE_C_POS_MSB 0xfb
#define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES 0xff
+/* SAA7113 bit-masks */
+#define SAA7113_R_08_FSEL 0x40
+#define SAA7113_R_08_AUFD 0x80
+
#if 0
/* Those structs will be used in the future for debug purposes */
struct saa711x_reg_descr {
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists