[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Thu, 8 Aug 2013 14:56:31 +0800
From: Wei Ni <wni@...dia.com>
To: <khali@...ux-fr.org>, <linux@...ck-us.net>, <swarren@...dotorg.org>
CC: <MLongnecker@...dia.com>, <linux-arm-kernel@...ts.infradead.org>,
<lm-sensors@...sensors.org>, <linux-kernel@...r.kernel.org>,
<linux-tegra@...r.kernel.org>, Wei Ni <wni@...dia.com>
Subject: [PATCH v2 3/3] Documentation: dt: hwmon: add OF document for lm90
Add OF document for lm90 in Documentation/devicetree/.
Signed-off-by: Wei Ni <wni@...dia.com>
---
Documentation/devicetree/bindings/hwmon/lm90.txt | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/lm90.txt
diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt
new file mode 100644
index 0000000..8024f11
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm90.txt
@@ -0,0 +1,20 @@
+* LM90 series thermometer.
+
+Required node properties:
+- compatible: manufacture and chip name,
+ which are listed in the Documentation/hwmon/lm90
+- reg: I2C bus address of the device
+
+Optional properties:
+- vdd-supply: vdd regulator for the supply voltage. If this is not set,
+ assuming vdd is always powered.
+- interrupts: lm90 can support interrupt mode, you can set interrupt here.
+
+Example lm90 node:
+
+nct1008 {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ vdd-supply = <&palmas_ldo6_reg>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists