| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 10 Aug 2013 10:52:57 -0700
From: Sukadev Bhattiprolu <sukadev@...ux.vnet.ibm.com>
To: linux-kernel@...r.kernel.org, linuxppc-dev@...abs.org
Cc: Stephane Eranian <eranian@...gle.com>,
Paul Mackerras <paulus@...ba.org>,
Anton Blanchard <anton@....ibm.com>,
Michael Ellerman <michael@...erman.id.au>,
Anshuman Khandual <khandual@...ux.vnet.ibm.com>
Subject: [PATCH 7/7] powerpc/perf: Export Power7 memory hierarchy info to
user space
[PATCH 7/7] powerpc/perf: Export Power7 memory hierarchy info to user space.
On Power7, the DCACHE_SRC field in MMCRA register identify the memory
hierarchy level (eg: L1, L2 etc) from which a data-cache miss for a
marked instruction was satisfied.
Use the 'perf_mem_data_src' object to export this hierarchy level to user
space. Some memory hierarchy levels in Power7 don't map into the arch-neutral
levels. However, since newer generation of the processor (i.e. Power8) uses
fewer levels than in Power7, we don't really need to define new hierarchy
levels just for Power7.
We instead, map as many levels as possible and approximate the rest. See
comments near dcache-src_map[] in the patch.
The hierarchy level information could be used with 'perf record --data'
or 'perf mem' command to analyze application behavior.
Usage:
perf mem record <application>
perf mem report
OR
perf record --data <application>
perf report -D
Sample records contain a 'data_src' field which encodes the memory
hierarchy level: Eg: data_src 0x442 indicates MEM_OP_LOAD, MEM_LVL_HIT,
MEM_LVL_L2 (i.e load hit L2).
Cc: Stephane Eranian <eranian@...gle.com>
Cc: Michael Ellerman <michael@...erman.id.au>
Signed-off-by: Sukadev Bhattiprolu <sukadev@...ux.vnet.ibm.com>
---
Thanks to input from Stephane Eranian and Michael Ellerman.
Changelog[v3]:
[Michael Ellerman] If newer levels that we defined in [v2] are not
needed for Power8, ignore the new levels for Power7 also, and
approximate them.
Separate the TLB level mapping to a separate patchset.
Changelog[v2]:
[Stephane Eranian] Define new levels rather than ORing the L2 and L3
with REM_CCE1 and REM_CCE2.
[Stephane Eranian] allocate a bit PERF_MEM_XLVL_NA for architectures
that don't use the ->mem_xlvl field.
Insert the TLB patch ahead so the new TLB bits are contigous with
existing TLB bits.
arch/powerpc/perf/power7-pmu.c | 65 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 65 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index 161861d..f8143d6 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -329,6 +329,70 @@ static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[])
mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc));
}
+#define POWER7_MMCRA_DCACHE_MISS (0x1LL << 55)
+#define POWER7_MMCRA_DCACHE_SRC_SHIFT 51
+#define POWER7_MMCRA_DCACHE_SRC_MASK (0xFLL << POWER7_MMCRA_DCACHE_SRC_SHIFT)
+
+#define P(a, b) PERF_MEM_S(a, b)
+#define PLH(a, b) (P(OP, LOAD) | P(LVL, HIT) | P(a, b))
+/*
+ * Map the Power7 DCACHE_SRC field (bits 9..12) in MMCRA register to the
+ * architecture-neutral memory hierarchy levels. For the levels in Power7
+ * that don't map to the arch-neutral levels, approximate to nearest
+ * level.
+ *
+ * 1-hop: indicates another core on the same chip (2.1 and 3.1 levels).
+ * 2-hops: indicates a different chip on same or different node (remote
+ * and distant levels).
+ *
+ * For consistency with this interpretation of the hops, we dont use
+ * the REM_RAM1 level below.
+ *
+ * The *SHR and *MOD states of the cache are ignored/not exported to user.
+ *
+ * ### Levels marked with ### in comments below are approximated
+ */
+static u64 dcache_src_map[] = {
+ PLH(LVL, L2), /* 00: FROM_L2 */
+ PLH(LVL, L3), /* 01: FROM_L3 */
+
+ P(LVL, NA), /* 02: Reserved */
+ P(LVL, NA), /* 03: Reserved */
+
+ PLH(LVL, REM_CCE1), /* 04: FROM_L2.1_SHR ### */
+ PLH(LVL, REM_CCE1), /* 05: FROM_L2.1_MOD ### */
+
+ PLH(LVL, REM_CCE1), /* 06: FROM_L3.1_SHR ### */
+ PLH(LVL, REM_CCE1), /* 07: FROM_L3.1_MOD ### */
+
+ PLH(LVL, REM_CCE2), /* 08: FROM_RL2L3_SHR ### */
+ PLH(LVL, REM_CCE2), /* 09: FROM_RL2L3_MOD ### */
+
+ PLH(LVL, REM_CCE2), /* 10: FROM_DL2L3_SHR ### */
+ PLH(LVL, REM_CCE2), /* 11: FROM_DL2L3_MOD ### */
+
+ PLH(LVL, LOC_RAM), /* 12: FROM_LMEM */
+ PLH(LVL, REM_RAM2), /* 13: FROM_RMEM ### */
+ PLH(LVL, REM_RAM2), /* 14: FROM_DMEM */
+
+ P(LVL, NA), /* 15: Reserved */
+};
+
+static void power7_get_mem_data_src(union perf_mem_data_src *dsrc,
+ struct pt_regs *regs)
+{
+ u64 idx;
+ u64 mmcra = regs->dsisr;
+
+ if (mmcra & POWER7_MMCRA_DCACHE_MISS) {
+ idx = mmcra & POWER7_MMCRA_DCACHE_SRC_MASK;
+ idx >>= POWER7_MMCRA_DCACHE_SRC_SHIFT;
+
+ dsrc->val |= dcache_src_map[idx];
+ }
+}
+
+
static int power7_generic_events[] = {
[PERF_COUNT_HW_CPU_CYCLES] = PME_PM_CYC,
[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = PME_PM_GCT_NOSLOT_CYC,
@@ -453,6 +517,7 @@ static struct power_pmu power7_pmu = {
.get_constraint = power7_get_constraint,
.get_alternatives = power7_get_alternatives,
.disable_pmc = power7_disable_pmc,
+ .get_mem_data_src = power7_get_mem_data_src,
.flags = PPMU_ALT_SIPR,
.attr_groups = power7_pmu_attr_groups,
.n_generic = ARRAY_SIZE(power7_generic_events),
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists