| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 28 Oct 2013 14:52:25 +0100
From: Kamil Debski <k.debski@...sung.com>
To: 'Kishon Vijay Abraham I' <kishon@...com>
Cc: linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm@...r.kernel.org, kyungmin.park@...sung.com,
Tomasz Figa <t.figa@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
gautam.vivek@...sung.com, mat.krawczuk@...il.com
Subject: RE: [RFC PATCH 2/5] phy: Add WIP Exynos 5250 support to the Exynos USB
PHY driver
Hi Kishon,
> From: Kishon Vijay Abraham I [mailto:kishon@...com]
> Sent: Friday, October 25, 2013 5:44 PM
>
> Hi,
>
> On Friday 25 October 2013 07:45 PM, Kamil Debski wrote:
> > Add support for Exynos 5250. This is work-in-progress commit. Not for
> > merging.
> >
> > Signed-off-by: Kamil Debski <k.debski@...sung.com>
> > Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
> > ---
> > drivers/phy/Kconfig | 7 +
> > drivers/phy/Makefile | 1 +
> > drivers/phy/phy-exynos-usb.c | 10 +
> > drivers/phy/phy-exynos-usb.h | 1 +
> > drivers/phy/phy-exynos5250-usb.c | 411
> > ++++++++++++++++++++++++++++++++++++++
> > 5 files changed, 430 insertions(+)
> > create mode 100644 drivers/phy/phy-exynos5250-usb.c
> >
> > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index
> > 2f7ac0a..0f598d0 100644
> > --- a/drivers/phy/Kconfig
> > +++ b/drivers/phy/Kconfig
> > @@ -36,4 +36,11 @@ config PHY_EXYNOS4212_USB
> > help
> > Enable USB PHY support for Exynos 4212
> >
> > +config PHY_EXYNOS5250_USB
> > + bool "Support for Exynos 5250"
> > + depends on PHY_EXYNOS_USB
>
> This should be a separate driver. Not necessary to use PHY_EXYNOS_USB.
> > + depends on SOC_EXYNOS5250
> > + help
> > + Enable USB PHY support for Exynos 5250
> > +
> > endmenu
> > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index
> > ca3dc82..0dff0dd 100644
> > --- a/drivers/phy/Makefile
> > +++ b/drivers/phy/Makefile
> > @@ -6,3 +6,4 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> > obj-$(CONFIG_PHY_EXYNOS_USB) += phy-exynos-usb.o
> > obj-$(CONFIG_PHY_EXYNOS4210_USB) += phy-exynos4210-usb.o
> > obj-$(CONFIG_PHY_EXYNOS4212_USB) += phy-exynos4212-usb.o
> > +obj-$(CONFIG_PHY_EXYNOS5250_USB) += phy-exynos5250-usb.o
> > diff --git a/drivers/phy/phy-exynos-usb.c
> > b/drivers/phy/phy-exynos-usb.c index d4a26df..172b774 100644
> > --- a/drivers/phy/phy-exynos-usb.c
> > +++ b/drivers/phy/phy-exynos-usb.c
> > @@ -212,6 +212,10 @@ extern const struct uphy_config
> > exynos4210_uphy_config; extern const struct uphy_config
> > exynos4212_uphy_config; #endif
> >
> > +#ifdef CONFIG_PHY_EXYNOS5250_USB
> > +extern const struct uphy_config exynos5250_uphy_config; #endif
> > +
> > static const struct of_device_id exynos_uphy_of_match[] = { #ifdef
> > CONFIG_PHY_EXYNOS4210_USB
> > {
> > @@ -225,6 +229,12 @@ static const struct of_device_id
> exynos_uphy_of_match[] = {
> > .data = &exynos4212_uphy_config,
> > },
> > #endif
> > +#ifdef CONFIG_PHY_EXYNOS5250_USB
> > + {
> > + .compatible = "samsung,exynos5250-usbphy",
> > + .data = &exynos5250_uphy_config,
> > + },
> > +#endif
> > { },
> > };
> >
> > diff --git a/drivers/phy/phy-exynos-usb.h
> > b/drivers/phy/phy-exynos-usb.h index f45cb3c..a9febfa 100644
> > --- a/drivers/phy/phy-exynos-usb.h
> > +++ b/drivers/phy/phy-exynos-usb.h
> > @@ -42,6 +42,7 @@ enum samsung_cpu_type {
> > TYPE_S3C64XX,
> > TYPE_EXYNOS4210,
> > TYPE_EXYNOS4212,
> > + TYPE_EXYNOS5250,
>
> No cpu types here.
> > };
> >
> > enum uphy_state {
> > diff --git a/drivers/phy/phy-exynos5250-usb.c
> > b/drivers/phy/phy-exynos5250-usb.c
> > new file mode 100644
> > index 0000000..156093b
> > --- /dev/null
> > +++ b/drivers/phy/phy-exynos5250-usb.c
> > @@ -0,0 +1,411 @@
> > +/*
> > + * Samsung S5P/EXYNOS SoC series USB PHY driver
> > + *
> > + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> > + * Author: Kamil Debski <k.debski@...sung.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/spinlock.h>
> > +#include "phy-exynos-usb.h"
> > +
> > +/* Exynos USB PHY registers */
> > +#define EXYNOS_5250_REFCLKSEL_CRYSTAL 0x0
> > +#define EXYNOS_5250_REFCLKSEL_XO 0x1
> > +#define EXYNOS_5250_REFCLKSEL_CLKCORE 0x2
> > +
> > +#define EXYNOS_5250_FSEL_9MHZ6 0x0
> > +#define EXYNOS_5250_FSEL_10MHZ 0x1
> > +#define EXYNOS_5250_FSEL_12MHZ 0x2
> > +#define EXYNOS_5250_FSEL_19MHZ2 0x3
> > +#define EXYNOS_5250_FSEL_20MHZ 0x4
> > +#define EXYNOS_5250_FSEL_24MHZ 0x5
> > +#define EXYNOS_5250_FSEL_50MHZ 0x7
> > +
> > +/* Normal host */
> > +#define EXYNOS_5250_HOSTPHYCTRL0 0x0
> > +
> > +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL (0x1 << 31)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT 19
> > +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_MASK \
> > + (0x3 << EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT 16
> > +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK \
> > + (0x7 << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_TESTBURNIN (0x1 << 11)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_RETENABLE (0x1 << 10)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N (0x1 << 9)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_MASK (0x3 << 7)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_DUAL (0x0 << 7)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ID0 (0x1 << 7)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ANALOGTEST (0x2 << 7)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_SIDDQ (0x1 << 6)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP (0x1 << 5)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND (0x1 << 4)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_WORDINTERFACE (0x1 << 3)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST (0x1 << 2)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST (0x1 << 1)
> > +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST (0x1 << 0)
> > +
> > +/* HSIC0 & HSCI1 */
> > +#define EXYNOS_5250_HOSTPHYCTRL1 0x10
> > +#define EXYNOS_5250_HOSTPHYCTRL2 0x20
> > +
> > +#define EXYNOS_5250_HOSTPHYCTRLX_REFCLKSEL_MASK (0x3 << 23)
> > +#define EXYNOS_5250_HOSTPHYCTRLX_REFCLKDIV_MASK (0x7f << 16)
> > +#define EXYNOS_5250_HOSTPHYCTRLX_SIDDQ (0x1 << 6)
> > +#define EXYNOS_5250_HOSTPHYCTRLX_FORCESLEEP (0x1 << 5)
> > +#define EXYNOS_5250_HOSTPHYCTRLX_FORCESUSPEND (0x1 << 4)
> > +#define EXYNOS_5250_HOSTPHYCTRLX_WORDINTERFACE (0x1 << 3)
> > +#define EXYNOS_5250_HOSTPHYCTRLX_UTMISWRST (0x1 << 2)
> > +#define EXYNOS_5250_HOSTPHYCTRLX_PHYSWRST (0x1 << 0)
> > +
> > +/* EHCI control */
> > +#define EXYNOS_5250_HOSTEHCICTRL 0x30
> > +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN (0x1 << 29)
> > +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 (0x1 << 28)
> > +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 (0x1 << 27)
> > +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR16 (0x1 << 26)
> > +#define EXYNOS_5250_HOSTEHCICTRL_AUTOPPDONOVRCUREN (0x1 << 25)
> > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT 19
> > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \
> > + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT)
> > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT 13
> > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_MASK \
> > + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT)
> > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL2_SHIFT 7
> > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \
> > + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT)
> > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT 1
> > +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_MASK \
> > + (0x1 << EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT)
> > +#define EXYNOS_5250_HOSTEHCICTRL_SIMULATIONMODE (0x1 << 0)
> > +
> > +/* OHCI control */
> > +#define EXYNOS_5250_HOSTOHCICTRL 0x34
> > +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT 1
> > +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_MASK \
> > + (0x3ff << EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT)
> > +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVALEN (0x1 << 0)
> > +
> > +/* USBOTG */
> > +#define EXYNOS_5250_USBOTGSYS 0x38
> > +#define EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET (0x1 << 14)
> > +#define EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG (0x1 << 13)
> > +#define EXYNOS_5250_USBOTGSYS_PHY_SW_RST (0x1 << 12)
> > +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT 9
> > +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK \
> > + (0x3 << EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT)
> > +#define EXYNOS_5250_USBOTGSYS_ID_PULLUP (0x1 << 8)
> > +#define EXYNOS_5250_USBOTGSYS_COMMON_ON (0x1 << 7)
> > +#define EXYNOS_5250_USBOTGSYS_FSEL_SHIFT 4
> > +#define EXYNOS_5250_USBOTGSYS_FSEL_MASK \
> > + (0x3 << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT)
> > +#define EXYNOS_5250_USBOTGSYS_FORCE_SLEEP (0x1 << 3)
> > +#define EXYNOS_5250_USBOTGSYS_OTGDISABLE (0x1 << 2)
> > +#define EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG (0x1 << 1)
> > +#define EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND (0x1 << 0)
> > +
> > +/* Isolation, configured in the power management unit */
> > +#define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x0
> > +#define EXYNOS_5250_USB_ISOL_OTG (1 << 0)
> > +#define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x4
> > +#define EXYNOS_5250_USB_ISOL_HOST (1 << 0)
> > +
> > +enum exynos4x12_phy_id {
> > + EXYNOS5250_DEVICE,
> > + EXYNOS5250_HOST,
> > + EXYNOS5250_HSIC0,
> > + EXYNOS5250_HSIC1,
> > + EXYNOS5250_NUM_PHYS,
> > +};
> > +
> > +/* exynos5250_rate_to_clk() converts the supplied clock rate to the
> > +value that
> > + * can be written to the phy register. */
>
> Follow coding guidelines ;-)
> > +static u32 exynos5250_rate_to_clk(unsigned long rate) {
> > + unsigned int clksel;
> > +
> > + /* EXYNOS_5250_FSEL_MASK */
> > +
> > + switch (rate) {
> > + case 9600 * KHZ:
> > + clksel = EXYNOS_5250_FSEL_9MHZ6;
> > + break;
> > + case 10 * MHZ:
> > + clksel = EXYNOS_5250_FSEL_10MHZ;
> > + break;
> > + case 12 * MHZ:
> > + clksel = EXYNOS_5250_FSEL_12MHZ;
> > + break;
> > + case 19200 * KHZ:
> > + clksel = EXYNOS_5250_FSEL_19MHZ2;
> > + break;
> > + case 20 * MHZ:
> > + clksel = EXYNOS_5250_FSEL_20MHZ;
> > + break;
> > + case 24 * MHZ:
> > + clksel = EXYNOS_5250_FSEL_24MHZ;
> > + break;
> > + case 50 * MHZ:
> > + clksel = EXYNOS_5250_FSEL_50MHZ;
> > + break;
> > + default:
> > + clksel = CLKSEL_ERROR;
> > + }
> > +
> > + return clksel;
> > +}
> > +
> > +static void exynos5250_isol(struct uphy_instance *inst, bool on) {
> > + struct uphy_driver *drv = inst->drv;
> > + u32 offset;
> > + u32 mask;
> > + u32 tmp;
> > +
> > + if (!drv->reg_isol)
> > + return;
> > +
> > + switch (inst->cfg->id) {
> > + case EXYNOS5250_DEVICE:
> > + offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET;
> > + mask = EXYNOS_5250_USB_ISOL_OTG;
> > + break;
> > + case EXYNOS5250_HOST:
> > + offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET;
> > + mask = EXYNOS_5250_USB_ISOL_HOST;
> > + break;
> > + default:
> > + return;
> > + };
> > +
> > + tmp = readl(drv->reg_isol + offset);
> > + if (on)
> > + tmp &= ~mask;
> > + else
> > + tmp |= mask;
> > + writel(tmp, drv->reg_isol + offset); }
> > +
> > +static void exynos5250_phy_pwr(struct uphy_instance *inst, bool on)
> {
> > + struct uphy_driver *drv = inst->drv;
> > + u32 ctrl0;
> > + u32 otg;
> > + u32 ehci;
> > + u32 ohci;
> > +
> > + switch (inst->cfg->id) {
> > + case EXYNOS5250_DEVICE:
> > + writel(0, drv->reg_mode);
> > +
> > + /* OTG configuration */
> > + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
> > + /* The clock */
> > + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK;
> > + otg |= inst->clk << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT;
> > + /* Reset */
> > + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
> > + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP |
> > + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG);
> > + /* TODO: Clear 4 bits as the old driver does. */
> > + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
> > + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
> > + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
> > + EXYNOS_5250_USBOTGSYS_OTGDISABLE;
> > + /* Ref clock */
> > + otg &= EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK;
> > + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE <<
> > +
EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT;
> > + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
> > + udelay(10);
> > + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
> > + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
> > + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET);
> > +
> > +
> > + break;
> > + case EXYNOS5250_HOST:
> > + /* Host registers configuration */
> > + ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
> > + /* The clock */
> > + ctrl0 &= ~EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK;
> > + ctrl0 |= inst->clk << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT;
> > +
> > + /* Reset */
> > + ctrl0 &= ~( EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST |
> > + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL |
> > + EXYNOS_5250_HOSTPHYCTRL0_SIDDQ |
> > + EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND |
> > + EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP);
> > + ctrl0 |= EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST |
> > + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST |
> > + EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N;
> > + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
> > + udelay(10);
> > + ctrl0 &= ~( EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST |
> > + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST);
> > + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
> > +
> > + /* OTG configuration */
> > + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
> > + /* The clock */
> > + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK;
> > + otg |= inst->clk << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT;
> > + /* Reset */
> > + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
> > + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP |
> > + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG);
> > + /* TODO: Clear 4 bits as the old driver does. */
> > + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
> > + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
> > + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
> > + EXYNOS_5250_USBOTGSYS_OTGDISABLE;
> > + /* Ref clock */
> > + otg &= EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK;
> > + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE <<
> > +
EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT;
> > + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
> > + udelay(10);
> > + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
> > + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
> > + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET);
> > +
> > + /* Enable EHCI DMA burst */
> > + ehci = readl(drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL);
> > + ehci |= EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN |
> > + EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 |
> > + EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 |
> > + EXYNOS_5250_HOSTEHCICTRL_ENAINCR16;
> > + writel(ehci, drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL);
> > +
> > + /* OHCI settings */
> > + ohci = readl(drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL);
> > + /* Let's do some undocumented magic (based on the old
> driver) */
> > + ohci |= 0x1 << 3;
> > + writel(ohci, drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL);
> > +
> > + break;
> > + }
> > +}
> > +
> > +static int exynos5250_power_on(struct uphy_instance *inst) {
> > + struct uphy_driver *drv = inst->drv;
> > +
> > + if (inst->state == STATE_ON) {
> > + dev_err(drv->dev, "usb phy \"%s\" already on",
> > + inst->cfg->label);
> > + return -ENODEV;
> > + }
> > +
> > + inst->state = STATE_ON;
> > + inst->ref_cnt++;
> > + if (inst->ref_cnt > 1)
> > + return 0;
> > +
> > + exynos5250_phy_pwr(inst, 1);
> > + exynos5250_isol(inst, 0);
> > +
> > + /* Power on the device, as it is necessary for HSIC to work */
> > + if (inst->cfg->id == EXYNOS5250_HSIC0) {
> > + struct uphy_instance *device =
> > +
&drv->uphy_instances[EXYNOS5250_DEVICE];
> > + device->ref_cnt++;
> > + if (device->ref_cnt > 1)
> > + return 0;
> > + exynos5250_phy_pwr(device, 1);
> > + exynos5250_isol(device, 0);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int exynos5250_power_off(struct uphy_instance *inst) {
> > + struct uphy_driver *drv = inst->drv;
> > +
> > + if (inst->state == STATE_OFF) {
> > + dev_err(drv->dev, "usb phy \"%s\" already off",
> > + inst->cfg->label);
> > + return -EINVAL;
> > + }
> > +
> > + inst->state = STATE_OFF;
> > + inst->ref_cnt--;
> > +
> > + if (inst->ref_cnt > 0)
> > + return 0;
> > +
> > + exynos5250_isol(inst, 1);
> > + exynos5250_phy_pwr(inst, 0);
> > +
> > + if (inst->cfg->id == EXYNOS5250_HSIC0) {
> > + struct uphy_instance *device =
> > +
&drv->uphy_instances[EXYNOS5250_DEVICE];
> > + device->ref_cnt--;
> > + if (device->ref_cnt > 0)
> > + return 0;
> > + exynos5250_isol(device, 1);
> > + exynos5250_phy_pwr(device, 0);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +
> > +static const struct common_phy exynos5250_phys[] = {
> > + {
> > + .label = "device",
> > + .type = PHY_DEVICE,
> > + .id = EXYNOS5250_DEVICE,
> > + .rate_to_clk = exynos5250_rate_to_clk,
> > + .power_on = exynos5250_power_on,
> > + .power_off = exynos5250_power_off,
> > + },
> > + {
> > + .label = "host",
> > + .type = PHY_HOST,
> > + .id = EXYNOS5250_HOST,
> > + .rate_to_clk = exynos5250_rate_to_clk,
> > + .power_on = exynos5250_power_on,
> > + .power_off = exynos5250_power_off,
> > + },
> > + {
> > + .label = "hsic0",
> > + .type = PHY_HOST,
> > + .id = EXYNOS5250_HSIC0,
> > + .rate_to_clk = exynos5250_rate_to_clk,
> > + .power_on = exynos5250_power_on,
> > + .power_off = exynos5250_power_off,
> > + },
> > + {
> > + .label = "hsic1",
> > + .type = PHY_HOST,
> > + .id = EXYNOS5250_HSIC1,
> > + .rate_to_clk = exynos5250_rate_to_clk,
> > + .power_on = exynos5250_power_on,
> > + .power_off = exynos5250_power_off,
> > + },
> > + {},
> > +};
>
> All this can be removed if you don't use exynos common PHY.
Ok. Now, I think, I start to understand you better. Still there is the
question - one single driver or many small drivers with repeated code.
>
> Thanks
> Kishon
Best wishes,
--
Kamil Debski
Samsung R&D Institute Poland
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists