linux-kernel - RE: [RFCv2][PATCHv5 0/4] Add Freescale FTM PWM driver.

Open Source and information security mailing list archives

Date:	Fri, 1 Nov 2013 06:34:00 +0000
From:	Li Xiubo <B47053@...escale.com>
To:	"thierry.reding@...il.com" <thierry.reding@...il.com>
CC:	"mark.rutland@....com" <mark.rutland@....com>,
	"linux-pwm@...r.kernel.org" <linux-pwm@...r.kernel.org>,
	"linux@....linux.org.uk" <linux@....linux.org.uk>,
	"ian.campbell@...rix.com" <ian.campbell@...rix.com>,
	"pawel.moll@....com" <pawel.moll@....com>,
	"swarren@...dotorg.org" <swarren@...dotorg.org>,
	"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
	"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"rob.herring@...xeda.com" <rob.herring@...xeda.com>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"rob@...dley.net" <rob@...dley.net>,
	"grant.likely@...aro.org" <grant.likely@...aro.org>,
	"t.figa@...sung.com" <t.figa@...sung.com>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>
Subject: RE: [RFCv2][PATCHv5 0/4] Add Freescale FTM PWM driver.

Hi Therry,

The binding patch has been acked, how about the other patches ?

If they are all okey, should I sent a another official version again ?

Thanks.

--
Xiubo

> Subject: [RFCv2][PATCHv5 0/4] Add Freescale FTM PWM driver.
> 
> Hello,
> 
> This patch series is the Freescale FTM PWM implementation. And there are
> 8 channels most supported by the FTM PWM. This implementation is only
> compatible with device tree definition.
> 
> This patch series is based on linux-next and has been tested on Vybrid
> VF610 Tower board using device tree.
> 
> 
> 
> Changes in RFCv2 of PATVHv5:
> - Remove "fsl,pwm-counter-clk"(all the four patches are modified).
> 
> Changes in v5:
> - Remove active/idle pinctrl stuff.
> 
> Changes in v4:
> - Check for the result and return an error for devm_kzalloc().
> - Move pinmux setting from the SoC file to the board specific file.
> - Revise the written mistake of 'ret |= FTMSC_CLKEXT;' --> 'reg |=
> FTMSC_CLKEXT;'.
> 
> 
> Changes in v3:
> - Remove "availabe" field.
> - Remove "fsl,pwm-avaliable-chs" property.
> - ...
> 
> Changes in v2:
> - Remove PWM CPWM/EPWM feature and sysfs.
> - Remove some redundant code.
> - Revise some code for more readable.
> - Remove "fsl,pwm-clk-ps", "fsl,pwm-number", "fsl,pwm-channels",etc.
> - Add "fsl,pwm-avaliable-chs", "fsl,pwm-counter-clk", etc.
> - Support 8 channels default in dtsi file.
> - Add counter clock source selection.
> - Rename some function name, macro name, etc.
> - Use PWM's and OF's existing function interfaces.
> - Split clk_unprepare_enable to clk_unprepare and clk_enable,etc.
> - ...
> 
> Added in v1:
> - Add Freescale FTM PWM driver support.
> - Add Freescale FTM PWM node for VF610.
> - Enable Enables FTM PWM device for Vybrid VF610 TOWER.
> - Add device tree bindings for Freescale.
> 
> 
> 
> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives