lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 13 Jan 2014 18:19:23 -0600
From:	Suman Anna <s-anna@...com>
To:	Ohad Ben-Cohen <ohad@...ery.com>,
	Mark Rutland <mark.rutland@....com>
CC:	Tony Lindgren <tony@...mide.com>,
	Kumar Gala <galak@...eaurora.org>,
	<linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>,
	<devicetree@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, Suman Anna <s-anna@...com>
Subject: [PATCHv4 6/7] hwspinlock/omap: enable module before reading SYSSTATUS register

The number of hwspinlocks are determined based on the value read
from the IP block's SYSSTATUS register. However, the module may
not be enabled and clocked, and the read may result in a bus error.

This particular issue is seen rather easily on AM33XX, since the
module wakeup is software controlled, and it is disabled out of
reset. Make sure the module is enabled and clocked before reading
the SYSSTATUS register.

Signed-off-by: Suman Anna <s-anna@...com>
---
 drivers/hwspinlock/omap_hwspinlock.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/hwspinlock/omap_hwspinlock.c b/drivers/hwspinlock/omap_hwspinlock.c
index 9f56fb2..194886e 100644
--- a/drivers/hwspinlock/omap_hwspinlock.c
+++ b/drivers/hwspinlock/omap_hwspinlock.c
@@ -101,10 +101,23 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 	if (!io_base)
 		return -ENOMEM;
 
+	/*
+	 * make sure the module is enabled and clocked before reading
+	 * the module SYSSTATUS register
+	 */
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
 	/* Determine number of locks */
 	i = readl(io_base + SYSSTATUS_OFFSET);
 	i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET;
 
+	/*
+	 * runtime PM will make sure the clock of this module is
+	 * enabled again iff at least one lock is requested
+	 */
+	pm_runtime_put(&pdev->dev);
+
 	/* one of the four lsb's must be set, and nothing else */
 	if (hweight_long(i & 0xf) != 1 || i > 8) {
 		ret = -EINVAL;
@@ -124,12 +137,6 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 	for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
 		hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
 
-	/*
-	 * runtime PM will make sure the clock of this module is
-	 * enabled iff at least one lock is requested
-	 */
-	pm_runtime_enable(&pdev->dev);
-
 	ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
 						base_id, num_locks);
 	if (ret)
@@ -138,9 +145,9 @@ static int omap_hwspinlock_probe(struct platform_device *pdev)
 	return 0;
 
 reg_fail:
-	pm_runtime_disable(&pdev->dev);
 	kfree(bank);
 iounmap_base:
+	pm_runtime_disable(&pdev->dev);
 	iounmap(io_base);
 	return ret;
 }
-- 
1.8.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ