linux-kernel - Re: [linux-sunxi] Re: [RFC PATCH v2 09/14] mtd: nand: add sunxi NFC dt bindings doc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 30 Jan 2014 09:46:38 +0100
From:	boris brezillon dev <b.brezillon.dev@...il.com>
To:	Henrik Nordström <henrik@...riknordstrom.net>,
	linux-sunxi@...glegroups.com
CC:	Maxime Ripard <maxime.ripard@...e-electrons.com>,
	Rob Landley <rob@...dley.net>,
	Russell King <linux@....linux.org.uk>,
	David Woodhouse <dwmw2@...radead.org>,
	Grant Likely <grant.likely@...aro.org>,
	Brian Norris <computersforpeace@...il.com>,
	Jason Gunthorpe <jgunthorpe@...idianresearch.com>,
	Arnd Bergmann <arnd@...db.de>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	linux-mtd@...ts.infradead.org, dev@...ux-sunxi.org,
	Rob Herring <robherring2@...il.com>
Subject: Re: [linux-sunxi] Re: [RFC PATCH v2 09/14] mtd: nand: add sunxi NFC
 dt bindings doc

Hello Henrik,

Sorry for the noise, I sent the mail to Rob's old address.

On 29/01/2014 23:37, Henrik Nordström wrote:
> ons 2014-01-29 klockan 11:11 -0600 skrev Rob Herring:
>
>> Isn't allwinner,rb implied by a lack of rb-gpios property. Or no R/B
>> pin is an option? If so, don't you need some fixed time delay
>> properties like max erase time?
>>
>> rb-gpios could be added to the generic nand binding as well.
> The Allwinner NAND controller have dedicated RB pins when NAND is
> enabled, only MUXed with other functions when NAND is not enabled.
>
> Leaving RB unconnected is not a valid hardware configuration. The
> controller internal timing engine depends on being able to sense RB to
> sequence NAND commands properly.

This is not true (at least in this driver). It was in yuq's driver because
he was using the NFC_WAIT_FLAG ,and in this case the controller wait
for the native R/B pin to be high before considering the CMD is complete.

This driver choose the appropriate way to test the R/B state of the
NAND chip according to what was specified in the DT:
- allwinner,rb: native R/B id. These pins will be used by the NAND
   controller to test the R/B state. Only 0 and 1 are valid because the
   NAND controller only support 2 R/B pins.
- rb-gpios: gpio used for R/B tests. This is a simple GPIO and will
   use the GPIO subsystem to test the R/B pin state.
- none: the NAND base code will wait some time before and send
   STATUS cmd to the NAND to check its status.

BTW, the controller supports 8 CS (8 NAND chips), but only have 2 native
R/B pins, this means you'll have to use the GPIO or standard GET_STATUS
method if you connect 3 or more NAND chips.

And for the record, I still think the rb-gpios property (or whatever
common name you choose: nand-rb-gpios ?) should be part of
the generic NAND binding, because other controllers (at least the
atmel one :)) use GPIOs to test R/B state.

Best Regards,

Boris

>
> Regards
> Henrik
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/